I just built up mine a 49cm Black on black (basically clear coated raw carbon) with Ultegra DI2, a Cybrei Crank and Elite Drive 50D wheels. Mine came in at 6.9kg with pedals, cages and garmin mount. The frame doesn't have the packaging or fit and finish of the more recent Yoeleo bikes or Winspace (like you said sharp edges but nothing that couldn't be filed down). But dang, even when I tested it with 105 DI2 and the same crank it still came in at 7.1KG. Most ''superbikes'' don't weigh in at that. Great video, nice to see the bike getting some air time on a Canadian channel to boot!
@henrychungfitness
11 ай бұрын
Agreed that it might not have the fit and finish of a Winspace or Yoeleo, but also at a fraction of the cost 👌 glad to see another Canadian with a Hygge. Ride on!
@Journeyonplanet
6 ай бұрын
I’m trying to get a frame, how tall are you if u don’t mind?
@RohanRidesBikes
11 ай бұрын
Hey people!! I am the guy that cracked the frame! Just to add on, I had been talking to them about it as I was misinformed on the torque specifications and they are sending me a replacement so I can vouch that they do honour their warranty! All that is need it to pay the shipping cost🥳 great video!
@Ben.92x
11 ай бұрын
So what was the correct torque spec rating for the seat post clamp? As I’m waiting for mine to arrive 😁
@RohanRidesBikes
11 ай бұрын
@@Ben.92x mine cracked whilst riding at 7nm as I was told 6-8 however when I told them it cracked they stated that 6.5nm is the highest, I would personally ask them as they have change the seatpost clamp, if not I would go with Henry’s advice of 5nm with plenty of carbon paste, if you do end up asking can you post the torque on here please! What colour did you get? I’m also waiting for my replacement to arrive.
@Ben.92x
11 ай бұрын
@@RohanRidesBikes thanks so much! I will be asking them a few questions! I went for the S-07 Grey anthracite colour! It’s currently being shipped so due to turn up within the next few weeks!
@bernardandoh9099
11 ай бұрын
Had to use 7nm for stem, steerer was slipping with 5 and 6nm
@RohanRidesBikes
11 ай бұрын
@@bernardandoh9099 when I built mine I changed the compression plug because I thought the supplied one was useless, after I put that in, the steerer didn’t slip! I think it was called bbb powerhead 👍🏼
@doghouse010
11 ай бұрын
I come for the information but end up staying for that soothing voice
@henrychungfitness
11 ай бұрын
Thank you thank you 😂
@kristofdepauw268
7 ай бұрын
I've bought the frame for my son, model 2024... just arrived after, I have 25 years off experience in cycling and 5 years as bike mechanic, this frameset seems high quality, the build will tell me more, you're review convinced me to choose this frame for him... he is going to use this in races.
@henrychungfitness
7 ай бұрын
Amazing let me know how the frame is when you build and in the races for your son! What groupset and wheels are you going with?
@nameaze
11 ай бұрын
amazing review & bike! did you do the cablework by yourself??
@tardishousemafia5246
11 ай бұрын
He has 2 building videos on the Channel :)
@henrychungfitness
11 ай бұрын
Thanks! I sure did 😂 it was quite a challenge but worth the look in the end
@gabrielsarrazin-mackay4964
11 ай бұрын
Funny, i use the same frame and same brakes! I had to play around quite a lot with the adjustment of the brakes but once settled up, they brake much much better than rim brakes or other mechanical disc brake.
@henrychungfitness
11 ай бұрын
Agreed, I forgot to mention the front brake needed quite a bit of adjustment in the beginning (not sure if it was due to the rotors, wheel or frame) but it's all good now! Great minds think alike with the build. Happy riding!
@ByAliiTR
10 ай бұрын
mate, thank you for your review. I want to buy a new roster set, this roster set is among my options. I will use it for racing. it needs to be very hard, its reactions need to be very sensitive. would you recommend it? Thanks for the review.
@henrychungfitness
10 ай бұрын
Thanks for watching! I think it could be a decent bike for racing, although I’m not a racer so I can’t give the best opinion. Maybe ask the Bialini cycling team what they think about it as they’re racing on these bikes?
@ByAliiTR
10 ай бұрын
@@henrychungfitness thank you :)
@TieuBachBach
10 ай бұрын
About the headset, you need to cut the head tube lower than the face about 3 - 4 mm and when you put the cap in that cap will pull your headset not lose and tight the screw enought for easy turn but dont too lose and it smoth like butter .😊
@henrychungfitness
10 ай бұрын
I believe I cut it about 5mm less 👌
@keithlogan9501
9 күн бұрын
Ive had that exact frame now for 2 years, built up with 12spd sram force wireless. I love it at this price point its awesome. Small issues seat post slipped until I wrapped with some tape. I just plugged unused cable routing holes with "O" ring rubber I cut down. All in all superb bike and at this price point very hard to beat. Also good communications from Hygge.
@henrychungfitness
8 күн бұрын
@@keithlogan9501 nice! Glad to hear it’s held up for 2 years. I agree it’s a great frame for the price. Did you try carbon paste on the seatpost to prevent it from slipping?
@keithlogan9501
8 күн бұрын
@@henrychungfitness No I didn't try carbon paste as I felt the clamp wedge itself was at the maximum extension limited by the slot in it and decided to increase the diameter of the post. No issue since.
@SaschaRissling
11 ай бұрын
THanks for your videos! I am reeeeally considering getting one and using all of the components of my current alloy road bike
@henrychungfitness
11 ай бұрын
Thanks for watching! That’s a great idea 🔥
@SaschaRissling
11 ай бұрын
how did you figure out what size frame and handlebar to get ? @@henrychungfitness
@henrychungfitness
11 ай бұрын
@@SaschaRissling I used Geometry Geeks to compare the sizing of my former Trifox X16 and this Model S 👌
@zaahierstanley955
6 ай бұрын
What size teifox did you have ?@@henrychungfitness
@henrychungfitness
6 ай бұрын
@@zaahierstanley955 I had the 54cm Trifox
@Kgreatsai
11 ай бұрын
oh wow you ride on Convair drive! I pass by that stretch of road on my way to work. Great hill climb workout there!
@henrychungfitness
11 ай бұрын
Such a great road there! Quite windy at times too with the planes taking off 💨
@EdwinFGroby
7 ай бұрын
GREAT REVIEW I'm in need of a second bike this looks like a great bike build option. Thank YOU
@henrychungfitness
7 ай бұрын
Thanks for watching! I think this would make a great second bike because n+1 always 😂
@ScottBaker1
11 ай бұрын
Good review! Kinda off topic, but what those pants you're wearing around 10:25 mark? Decent cold weather pants?
@henrychungfitness
11 ай бұрын
Thanks! They’re Woods hiking pants but I’m not quite sure what model. They’re perfect commuting/work pants and have extra material at the knee that helps with the cold and wind 👌
@viego02
8 ай бұрын
Nice review! Looking to buy this frame. Can you guys tell me about stiffness and comfort of this frame? How does it compare to bigger brands?
@henrychungfitness
8 ай бұрын
Thanks for watching! I find the bike quite stiff as others have mentioned yet still comfortable as well. I commute on my Hygge to work as well and it’s a fun bike. I can’t really compare it to big brands because I haven’t ridden any newer models but I’m sure it could hold its own 🤙
@aldrinclementina4297
11 ай бұрын
Nice build. It's fast because it's more aero compared to the ones you mentioned you had before.
@henrychungfitness
11 ай бұрын
Thanks! It must be the aerodynamics 💨
@PatrickLino
11 ай бұрын
Dang Aldrin, you everywhere like I am haha!
@tardishousemafia5246
11 ай бұрын
Hey Henry, great video. I’m stuck between this and an Elves eglath (an endurance frame), do you find the frame comfortable over longer distances or do you think it feels harsh? I had a trifox X16 before and this will be the crash replacement ;)
@henrychungfitness
11 ай бұрын
Sorry to hear about your crash and X16 and hope you’re OK 👌 the Model S felt harsh initially (compared to the Trifox) but I got used to it. Now it just feels fast 💨. Elves looks good too and I was debating on the Falath but this was the cheaper option. All the best on your choice!
@tardishousemafia5246
11 ай бұрын
@@henrychungfitness it happened nearly a year ago and I didn’t have the money to replace it at the time, so I just picked up an Allez which is great but I love building bikes and I’m yearning for something a bit flashier after my trifox. Thanks for your advice, man
@henrychungfitness
11 ай бұрын
@@tardishousemafia5246 thanks for dropping by, and whatever you end up getting, I'm sure it will be a blast to build up and ride!
@youarevictoria4981
11 ай бұрын
Nice. I think it is common to have a bit of loosening on the handlebar, esp at first. I have had to tighten once or twice, also redo the crank preload once. You bike looks great.
@henrychungfitness
11 ай бұрын
Thanks! The handlebar seems to be staying with 6nm 👌
@josephclarke7133
2 ай бұрын
Hi Henry, great vids on this. Waiting on delivery before starting my build. Could you tell me the size holes for the front and read derailleur that you think should have grommets? I've found some online but need to know the hole size - would rather have them ready when the bike arrives than delay the build! Thanks!
@henrychungfitness
2 ай бұрын
@@josephclarke7133 they’re about 5-6mm in diameter (couldn’t get the most accurate measurement since there are some things in the way). Best of luck on your build!
@ramonp.m.5611
11 ай бұрын
Impresionante!! Voy a compartir tu video por redes para que todo el mundo vea esta maravilla ❤ nuevo sub
@henrychungfitness
11 ай бұрын
Thank you for stopping by and watching 🙏
@miltonstewart1
4 ай бұрын
Thanks, brother. I love your research.
@raphaelalmeida4596
3 ай бұрын
awesome video, man. thanks! by the way, I got my Hygge and I now have about 4 months of riding, but I'm having some issues with play/loose on the headset. by braking the front wheel, I can note a huge play (almost 5cm!!! of movement) and I'm very uncomfortable and concerned with my safety on descents. have you faced these issues? (I got the handlebar 40cm x 130 mm and I'm using all the spacers) I still love the bike =)
@henrychungfitness
3 ай бұрын
5cm of play or 5mm? That’s a big difference, but either way they’re both too much play. You should really stop riding and get it fixed by readjusting the expander plug and handlebar/headset assembly. I’ve torqued my expander plug to 9Nm and handlebar/stem bolts to 6Nm.
@raphaelalmeida4596
3 ай бұрын
@@henrychungfitness thanks for the advice. I've already tried readjusting the expander, but it hasn't worked. So I dropped the bike at the bike shop to fix it 🙏
@henrychungfitness
3 ай бұрын
@@raphaelalmeida4596 Make sure to ask them to check the fork as it may be damaged if the headset was loose and you were riding it like that for awhile.
@raphaelalmeida4596
3 ай бұрын
@@henrychungfitness much thanks for the advice. Now the bike is perfect. There's no more loose on the headset.
@kristiaandoms2822
11 ай бұрын
Great review Henry. Do you know how the Hygge compares to the Winspace T1500.?
@henrychungfitness
11 ай бұрын
Thanks for commenting! Unfortunately I haven’t ridden a @winspacebikes before 🤷♂️
@dontknow2
11 ай бұрын
For people who have the seat post go loose you can add some thread locker
@henrychungfitness
11 ай бұрын
Good tip! 👌
@AKG77
10 ай бұрын
Are the brake housing compressionless? If not the braking can feel soft. They are not cheap but if you use disc brake they are quite essential.
@henrychungfitness
10 ай бұрын
I don’t believe mine are compression less but I’ve heard good things about them. Perhaps next time I’ll jump on them, but for now my setup is working quite nice 👍
@dbgrand
11 ай бұрын
I bought the same frame with custom painting. I want to build it with ltwoo rex. Saving some money to get all the parts together
@joluts3163
11 ай бұрын
I am currently building this frame with LTWOO eRX
@henrychungfitness
11 ай бұрын
Amazing! All the best on your new build 🤙
@oskarwreiber5854
3 ай бұрын
@@joluts3163 how did it turn out? Do you have pictures and parts list?
@joluts3163
3 ай бұрын
@@oskarwreiber5854 no big issues, just had to file the rear derailleur cable exit so the bigger eRX power cable could get through. Have ridden it when weather allows it. No issues. Parts: -frame wheels Hygge - Bottom bracket Shimano mt-501 - Magene pes 505 power metre with cranks - cassette ztto rainbow 12 speed 11-34 - vittoria rubino pro tubeless tires - 3D printed carbon saddle Ryet Almost all parts are from Ali Express
@torakorochannel
6 ай бұрын
It's awesome that you put the bike together yourself. I'm thinking of buying this frame too! Is the frame you purchased a size S? I'm sorry my English is not good
@henrychungfitness
6 ай бұрын
Thank you 🙏 I got the size M (52cm) frame. Good luck on your build!
@PatrickLino
11 ай бұрын
Looking good!
@henrychungfitness
11 ай бұрын
Thanks! It's a good looking ride 😁
@viego02
8 ай бұрын
@PatrickLino are you going to try this frame? :)
@PatrickLino
8 ай бұрын
@@viego02 No plans for me.
@endtimeslips4660
11 ай бұрын
WOW it look really good
@henrychungfitness
11 ай бұрын
Thanks for dropping by 😃
@manouchk38
Ай бұрын
Becarefull with cycling items from Aliexpress. I bought a suspension seatpost in april 2024. In august, after only four month, the seatpost tube had a complete breakdown. Garanty was only 15 days. I would be quite afraid to by a bike that could break in four month.
@jugasrki
10 ай бұрын
Hi People !! I'm planning to build bike with this frame ... I'm 182cm height and seams to fit M and L frame. But on L frame stem should be -6deg and on M 0deg. Not able to gage is there and - deg on stem.
@miltonstewart1
4 ай бұрын
Thanks brother. Love your review ❤️
@henrychungfitness
4 ай бұрын
Thank you for watching 🙏
@ilja2947
11 ай бұрын
Thanks for the nice video series. It's a shame that this frame is only offered up to size L/55cm. Concerning the missing grommets, if you have access to a 3d printer, you could use some rubbery filament to print those.
@henrychungfitness
11 ай бұрын
Thanks for watching! That’s a good idea for the 3D printed grommets 👌
@amirbooboo
10 ай бұрын
Is 55cm not big enough?
@ilja2947
10 ай бұрын
@@amirbooboo I'm 1.85 m, I usually ride 58cm. And I have a couple of cycling friends who are a lot taller than me.
@luupski
2 ай бұрын
Unable to find that frame / wheels on ali express
@zaahierstanley955
6 ай бұрын
What size caad vs 52 hygge? Thinking of getting this frame perhaps
@joluts3163
11 ай бұрын
What size from do you have? And how tall are you?
@henrychungfitness
11 ай бұрын
I have the size medium 52cm (I’m 5’11” and usually ride a size 54cm)
@joluts3163
11 ай бұрын
@@henrychungfitness Thx, I got the S, I am 5'8. I had to use 2 big spacers and 1 small. Not so nice to look at. 😅
@ByAliiTR
10 ай бұрын
@@joluts3163 Hello. Are you 1.88? If so, did you get the "s" squad size? It must have been quite small. My height is 1.80 I will buy "s" instead of "m", I hope it will not be small.
@alfonsosousa805
9 ай бұрын
Hello, what is the weight of the bike at the end of the assembly?
@henrychungfitness
9 ай бұрын
Check 6:20 for the weight 👌
@jhonmolano2802
11 ай бұрын
Do you recommend this frame for climbing?
@henrychungfitness
10 ай бұрын
I’m not sure if it’s the best bike for climbing because it’s not necessarily the most lightweight, but I’m sure it can hold its own 👍
@BicycleRockerTV
4 ай бұрын
Bro, hi, do you want to buy direct mount for rear dearuller ? i try to find this part, but i can't....
@henrychungfitness
4 ай бұрын
Sorry I don’t understand what you’re trying to ask..
@BicycleRockerTV
4 ай бұрын
@@henrychungfitness sorry for my english 😄 I meant, is it possible to buy a direct mount Shimano derailleur link for this frame anywhere?
@henrychungfitness
4 ай бұрын
@@BicycleRockerTV Try this link: s.click.aliexpress.com/e/_Dn4s9QR
@andirafi2250
7 ай бұрын
does this go into the all around frame? how to climb it?
@henrychungfitness
7 ай бұрын
I’m just an every day cyclist, but I would consider this an all-around frame (lightweight enough, stiff, fast and even used as my commuter bike to work) 👌
@mo-p9581
9 ай бұрын
Would u say this is a rebranded works frame ? Sl8 carbon -replica
@henrychungfitness
9 ай бұрын
I wouldn’t say this is a replica SL8. Lots of differences in shape of the frame etc, but in terms of cost this far outweighs the performance of the SL8 in my opinion 😂
@KrolKrol-eb7ly
7 ай бұрын
Hi I have one request. what is your frame size and how tall are you in cm? I have 183 cm between M and L size.What do you advise?
@henrychungfitness
7 ай бұрын
I got the medium 52cm size (which is closer to a 54cm I’d say). I’m about 5’11” and like the geometry of the medium frame 👍
@KrolKrol-eb7ly
7 ай бұрын
The hygge frame is better than trifox ?
@henrychungfitness
7 ай бұрын
@@KrolKrol-eb7ly it’s different I would say. The Trifox is a bit more comfortable while the Hygge is more aggressive and stiff. Both are great bikes though
@KrolKrol-eb7ly
7 ай бұрын
@@henrychungfitness one morw request how long are your legs and how many cm are from the ground to the top of the horizontal pipe.
@PredatorDK
23 күн бұрын
In Danish, "Hygge" means cosy/cosiness.
@Hatchet898
12 күн бұрын
And is pronounced more like Ruger with an H
@장율-u8q
5 ай бұрын
진짜 예쁘네요! 잘보고 갑니다! 저도 이 영상을 보고 프레임 주문 했어요
@henrychungfitness
5 ай бұрын
비디오를 봐주셔서 고마워요! 그리고 프레임을 좋아하길 바랍니다 👍
@Nick-cs5yc
6 күн бұрын
👍👍
@ooookaaay1746
11 ай бұрын
Hygge!!!
@henrychungfitness
11 ай бұрын
Hygge 👌 ride on!
@LoicChamonal
9 ай бұрын
On dirait vraiment un specialized 😍
@henrychungfitness
9 ай бұрын
Pas un specialized, mais peut-être assez vite 💨
@LoicChamonal
9 ай бұрын
@@henrychungfitness une petite ressemblance au BMC aussi
@LoicChamonal
9 ай бұрын
@@henrychungfitness sinon vraiment content de ce vélo ? J'hésite à le prendre
@henrychungfitness
8 ай бұрын
@@LoicChamonal je suis content pour le prix 🤙
@gabrielsarrazin-mackay4964
11 ай бұрын
I also run 32mm tires, I’d say that the absolute limit.
@PatrickLino
11 ай бұрын
what do the tires actually measure to at the rim?
@gabrielsarrazin-mackay4964
11 ай бұрын
I actually run gp5000 str in a 30mm that measure 32mm on my 24mm internal rim. The 32mm I originally put measured 34mm, and it was kind of ok at the back but to close at the front for a safe ride.
@lkbfreak
Ай бұрын
@@gabrielsarrazin-mackay4964 Funny how my GP5000 32 mm measure 30 mm on a 21 mm rim 😃
@gabrielsarrazin-mackay4964
Ай бұрын
@@lkbfreak interesting! Tubeless, width, shape of the rim, all these factors will impact actual size.
@techstryker
10 күн бұрын
Hygee good Bīke
@dandicristina1389
3 ай бұрын
What a funny name can’t even imagine showing up to a race or group ride with a bike named hygge lol
@henrychungfitness
3 ай бұрын
@@dandicristina1389 who cares about names/brands? As long as the bike rides well 😂
@dandicristina1389
3 ай бұрын
@@henrychungfitness ya until that shit falls apart going down a hill at 40 mph
@henrychungfitness
3 ай бұрын
@@dandicristina1389 so far so good though 👌
@dandicristina1389
3 ай бұрын
@@henrychungfitness I will stick with felt or specialized or a pinarello a lot of rnd goes into them bikes
@hockysa
11 ай бұрын
That’s an SL8 lol
@henrychungfitness
11 ай бұрын
Feels like an SL8 without the price tag 😂
@hockysa
11 ай бұрын
@@henrychungfitnessdamn.. temptation is real but wife would not be happy. 😅
@henrychungfitness
11 ай бұрын
@@hockysa buy now, ask for forgiveness later 😂
@hockysa
11 ай бұрын
@@henrychungfitness oh wow honey look at this. where did this box come from?!
@RATADATUAVELHA
4 ай бұрын
in these days, people try to look as a pro of giro d'italia or tour of france but in the end they don't even ride 80kms and do it weekly... 😂 just a show off
@henrychungfitness
4 ай бұрын
😂 many bikes are bought but not ridden
@장정현-t7u
6 ай бұрын
한국분이시군요! 저도 이번에 기변을 고려하면서 가격거품이 없는 알리제품들로 구성해보려고 합니다. 그중에 프레임을 보던중 HYGGE 제품이 마음에 드네요! 자세한 리뷰 감사합니다. 많은 도움이 되었습니다.
@henrychungfitness
6 ай бұрын
HYGGE 프레임은 가격에 비해 좋은 프레임입니다. 다음에 한국에 가면 알리제품들로 자전거를 더 많이 볼 수 있었으면 좋겠어요!
Пікірлер: 148