Would you like me to design a good, cheap CNC router and sell plans for it? Just trying to get a feel for the interest level... *Update:* A lot of you are getting really worked up that I'm not releasing these plans yet. I don't want to release them until I'm 100% happy with the design. It could take months or even years to reach that point. If I never am happy with the design, I'll never release it. I hope that isn't the outcome, but I can't make any promises. So if you really need a CNC machine, maybe don't wait around for this one.
@TheWoodKnight
8 жыл бұрын
Though I have an XCarve, I'd be interested. Throw in a C axis and I'll be signing up for that ;)
@RedGreen1
8 жыл бұрын
I'm very interested in this. And thanks for producing such compelling videos, I've enjoyed every one.
@ovidiub13
8 жыл бұрын
I'm also interested in getting one from you.
@miklosbiro
8 жыл бұрын
big time. please.
@callumsimpson4521
8 жыл бұрын
Jeremy Schmidt yes please what do you think the cheapest you could build one for would be
@caigner
8 жыл бұрын
Jeremy, you are brilliant! I really enjoy your style of video making. Simple, very informative, and - Thank God! - no music and no "fancy" intro. Simply a joy to watch. Very well done!
@Jer_Schmidt
8 жыл бұрын
+Christian Aigner Thank you!! Glad to hear your feedback.
@byonbill9499
7 жыл бұрын
I hadn't thought about it until now, but you sure are right about music and intros. They are fine if very minimal, that is short and low volume.
@MrPatdeeee
5 жыл бұрын
@@byonbill9499 AMEN!
@55Rumble
7 жыл бұрын
Hey... I've checked out a LOAD of videos about DIY CNC builds and yours, although is not strictly a "build video" tops them! It's great to see a young guy with your level of knowledge and understanding! Now, I need to put a shopping list together!
@JohnHeisz
8 жыл бұрын
Video quality was up there, nearly as awesome as that clamping idea :)
@Jer_Schmidt
8 жыл бұрын
+John Heisz Thanks!
@kipsus
6 жыл бұрын
Such an eye opening approach! The extremely clever use of angle brackets to assemble carriages is unprecedented - the rigidity/weight ratio is probably orders of magnitude higher than the traditional thick aluminum plate approach. I'm thinking of expanding this idea by using U profiles for rail-block joints and adding a thin aluminum plate inbetween to improve stability in plane. Thanks for sharing this, I'm really amazed this hasn't exploded in the DIY community
@woodstoney
7 жыл бұрын
Nicely done Jer. I appreciate your honesty and candid discussion of theory, ideas, practical use as well as pros and cons. You don't talk more than necessary like so many others do to explain things. Good work and keep 'em coming!
@larryb4122
5 жыл бұрын
Hello Jeremy, I've recently found your you tube channel and let me just say, with the utmost respect, "For a man as young as you are, I'm joyfully impressed with the multitude of skill sets you possess". I thoroughly enjoy your aptitude and willingness to share what you have learned. You treat your skills as a gift and understand their value with your generosity. Hope to see the inexpensive CNC router soon.
@ziggykarner2701
6 жыл бұрын
I usually never comment on any channels I subscribe to but, this is by far the best channel I’ve ever subscribed to. Jeremy Schmidt you rock! keep up the great work.
@TheWolfgangfritz
5 жыл бұрын
Keep in mind Jeremy, that a decent table saw with a carbide blade made for plywood and finish cuts can very easily cut through aluminum, copper, bronze etc. all non-ferris 1/2" material. You just take it slow and don't force it. I always like using Aircraft Aluminum for various projects. Looks like you're a smart lad, can't wait to see some of your designs and projects!
@LisaMFida
4 жыл бұрын
First timer here, and I think your video quality is outstanding. No studdering, unnecessary ums, etc. You were concise and straight to the point. Good job! Thank you.
@nikolatesla3874
8 жыл бұрын
Jeremy, PLEASE build your own CNC and make a video series about it!
@generalzugs6017
8 жыл бұрын
Lol! The irony of your nick asking for this :D
@Jer_Schmidt
8 жыл бұрын
Based on the response I've been getting, there's a pretty good chance of that happening.
@Richard_Cunningham
5 жыл бұрын
Hey Jermey, I have almost finished my build of your belt grinder. I keep going back to all your videos as I build it. Now I’m thinking I ‘want’ / ‘need’ a CNC router as my next project. (Something just like yours) Keep up the great work. 👍🏻
@ecrusch
8 жыл бұрын
Nice work. You explained it well too. Thank you.
@specialk22tt
8 жыл бұрын
You're a pretty smart dude Mr. Schmidt.
@TheGr8Ox
8 жыл бұрын
Good job, would like to see what you could build for $800 or less. Very interested.
@MCircuits
4 жыл бұрын
The beauty of building your own, if your into it of course. Knowledge on how everything works. Not just buying one and ask yourself what is this for? The number two reason that building your own is better. You can always revised something without the need of redesigning the whole area. PERIOD. Knowledge is always power. If you can't build one, then simply not serious of what you are doing. It is just because of what you see and watch are INTERESTING!!! and you want to own one. CNC milling is not just about engraving. It is way more complex than that you can imagine. Why i can't build one as rigid as I need it to? It is a step by step process, you start from soft material all the way to the hardest one to mill..and there goes the stroy of revising your own build machine. Thank you for this video. I saw what I just need to figure out the flex and do something about it.
@marceltimmers1290
8 жыл бұрын
Hi mate. I'm happy that I'm not the only one that does daft spur of the moment things.
@nannerpuss9430
8 жыл бұрын
Nope, I am the same way. If something sounds interesting enough to me, it essentially becomes my obsession for the next few weeks.
@marceltimmers1290
8 жыл бұрын
The strange thing is, when you do nothing you forget all about it until you see it again. Rather morbid is it not?
@wayneg5296
5 жыл бұрын
I like your projects. You may be heavier on perfection than I would deem necessary, but hey, it's your projects and your channel! Thanks also for no silly music and your excellent commentary. Thumbs up!
@honeyy79
8 жыл бұрын
Impressive. Ive been wanting to buy the xcarve, but this one seems alot better than the xcarve. I think i'll go to buy a laser cutter first and foremost. Huston you have a new subscriber :)
@Jer_Schmidt
8 жыл бұрын
+Tone Andersen Thanks! I wouldn't rule out the X-carve if you just want to experiment with CNC, but if you want to do any real work with it it probably won't be satisfactory.
@ratiugjr
7 жыл бұрын
Awesome build - I would be interested in a complete package or if there was a set of design plans that includes part numbers and vendors. Great Job!
@TheJohdu
8 жыл бұрын
plans for a 800 $ cnc would sell like sliced bread i guess. but how to avoid a the 700 bucks software in that case?
@Jer_Schmidt
8 жыл бұрын
+TheJohdu Honestly there is some very good software in the $100 range. Even free software is getting better these days.
@TheJohdu
8 жыл бұрын
well in that case, count me in!
@drmkiwi
8 жыл бұрын
Good stuff, thanks. It is amazes me that whatever you start with you will find ways to improve the system! You have explained some really good information which is valuable especially to somebody just starting out. And for those who are considering making their own I think another "you wont know till you build it" is what table size will you need.
@Jer_Schmidt
8 жыл бұрын
+DRMNZ Thanks! Yeah, the needed table size is hard to predict. I say just make it as big as you can afford to in terms of shop space.
@ragtie6177
8 жыл бұрын
Excellent young man.
@derekshoup462
7 жыл бұрын
Jeremy - just finished watching a few of your videos, and also just subscribed to your feed. Love your videos - very easy to watch and understand and no annoying background music. Full of good information and the camera angles really work well with your narrative. Very well done!
@Jer_Schmidt
7 жыл бұрын
+Derek Shoup Thank you sir!
@MakingStuffco
8 жыл бұрын
Hey, do the $800 dollars CNC and I will do it based on yours :D
@1pcfred
8 жыл бұрын
I think if they really added everything up they might end up going over their estimate. I'd say a machine comparable to the one here would cost more than $1,000. Probably more than $1,200 even. But it would depend on the exact components you used.
@1pcfred
8 жыл бұрын
***** for us shipping on heavier items from China can be quite costly. If there was no shipping on stepper motors I'd be set over here. But shipping doubles their cost. That puts them right out of the great deal range too. They're just an OK deal then. Steel and aluminum is not cheap to buy retail here either. Nothing is anymore. Heck even the construction lumber I ended up using cost me a pretty penny. But it works OK. It just doesn't look so good.
@przemysawkubiak9981
7 жыл бұрын
what jump yous bolts hawe in x and y axis ? and how many nm motors ?
@BenBrandt22
8 жыл бұрын
Great overview, I like all the rigidity upgrades. Nice work.
@Jer_Schmidt
8 жыл бұрын
+Ben Brandt Thanks!
@PyroRob69
7 жыл бұрын
Great video. I like that you explained what was wrong with the old design, and why you changed it. I would be interested in your plans, if and when you decide to release them.
@keirfarnum6811
4 жыл бұрын
I appreciate your explanation of this. I have been wondering about trying to buy or make a small CNC and this gives some very useful information. Thanks for taking the time to show us this.
@MrClickbang357
5 жыл бұрын
OUCH!! $270 for those end caps!!! Hey unfortunately we have all been there!!! I was thinking of using some sort of 80/20 for those verticals. Thank you for sharing your CNC adventure - warts and all!!! It's one of those machines I have been thinking about for, well, too long!!! Once again thanks for sharing.
@KFRogers263
3 жыл бұрын
extra thumbs up for the T track construction and the clamp idea. very very creative.
@websurfer44
7 жыл бұрын
Very nice table. Awesome job of explaining how you did it and pointing out the various parts you were talking about. Easy to follow along!
@Jer_Schmidt
7 жыл бұрын
+Jer in Wis Thank you!
@markdaniel4451
7 жыл бұрын
You doing a great job. I did old school Tool and Die work (no CNC;s) for 30 Years. I would go up on the supported shafts to 1" or more. The longer the shafts the bigger it needs to be. I bought a cop/carver/duplicator. machine. Same problem. I would like to make one, but I know nothing about CNC. I have built and design many custom machines over the years. some of my machines are still running fine today 20 years later. Today's manufacturing is all about cheaper than the competition.
@jfan4reva
8 жыл бұрын
This is the first CNC machine I've seen where the bearings are spaced widely enough to make the machine stable (13"!) You don't normally see that since rail length = bearing spacing + travel. Stability and travel means longer rail$$$$ (also a larger machine.) Good job Jeremy! I like the way you think! Thanks for the video.
@Jer_Schmidt
8 жыл бұрын
+jfan4reva Thanks!!
@jonatanrrz
7 жыл бұрын
Thank you for sharing your experience! Great explanation about the major concerns to get rigidity.
@kkimfinaxmusic3883
7 жыл бұрын
You nailed the right point, that's why all serious machines are basically made from cast iron or aluminium. Still they can be bent if not correctly leveled. It is not stepper vs servo, parallel vs USB. Machine rigidity, parallelism, flatness determines everything. If I were you, I wouldn't empty between two rails, they will weaken the rigidity of X-axis. And if you want a machine doing serious job, forget about aluminium extrusion, round rails and ACME screws. Trust me, I had endless pain from a Chinese machine. A'way, you did a very good job to overcome your circumstance, keep going!
@0372mr335
8 жыл бұрын
Jeremy. Thank you for the video. I tried using the threaded inserts to no avail. Now I'm building it your way. I'm also saving $37.00 on a Tee square bit I no longer need. Your the greatest!
@Jer_Schmidt
8 жыл бұрын
+0372mr335 Awesome! Thanks!
@LuxBacelo
8 жыл бұрын
Thanks for sharing about your machine! I'm building one totally, from mechanics to software and firmware. Again, thanks for sharing!
@johnware5312
7 жыл бұрын
Nice mod there..... My home brew is somewhat similar in size has almost the same specks as the shopbot desktop. I used the same acme rod as you did 1/2 5 start on X and Y and single start on Z but I went with 450 Oz/in steppers, real stout bit snappers.. I use Mach 3 as the controller on a 16 year old desktop. Youre close on the guesstimate price there too. For those wanting to do a cnc from some plans or a scratch build this guy is DEAD ON about the rigidity issues. As an example any of the X-carves have a serious deflection problem in all 3 axis. That being said if you cut shallow an slow on one you can still get reasonably acceptable accuracy. I agree that any of the small (25 X and Y cut area or less ) are all overpriced for what you get. Now thats not saying theyre bad. Its two different issues. In any case with a factory made CNC you get what you pay for and the biggest mistake you can make is cheaping out.
@Ulicno
6 жыл бұрын
Dude fantastic video!!! Far the best video I have seen on youtube with DIY CNC machines. I will build my own and will be similar to yours. That twist causes a moment that comes as a result of gantry moving and cutting force. There is 4 ways to reduce that moment. Clamping idea is brutal, so simple but effective. Keep on with fantastic work. I subscribed on your channel, best regards
@Warlordfff
6 жыл бұрын
Dude you make the most rigid work around all of your machines than anyone else I've seen(Matthias Wandel excluded) .You show that if you make some decent research and go step by step you can actually do it as well as everything else you built so far. Keep up the good work.
@Cigarsnguitars
7 жыл бұрын
Great video. The CNC you have in the video would probably suit most weekend warriors. You're a couple of pay grades above my level. Thanks for sharing.
@robertodonovan4937
5 жыл бұрын
Hi jeremy. I've built a metric version of your belt grinder,it's a great addition to my workshop,love using it. I need a new project! I'll buy your cnc machine plans if you make them! Keep up the good work!
@andrewbrown8148
8 жыл бұрын
I'd pick up your plans for sure~! I've been looking at getting into a CNC for my shop and would love the challenge of building it myself. Great info in your video for all the considerations on strengthening the different aspects of the machine. Always up for saving a buck and increasing my skills~!
@buynsell365
6 жыл бұрын
Once again another GREAT job !!! I love the quality of your work and you do a great job explaining. Keep up the great work.
@Fotai19
7 жыл бұрын
Thank you Jeremy for all the brilliant ideas
@eddiev.3059
8 жыл бұрын
Nice machine dude. I've been buying parts for my build for about a year now, mainly due to space constraints. Originally I had plans for a 3x4 ft machine using MDF but have switched to a 3x5 ft using steel and aluminum since. I just moved into a new house with a bigger shop. Can't wait! Just like you said, I opted to build my own because I couldn't find a machine that I was fully happy with and couldn't see myself blowing $4k+ on. BTW, for those thinking of biulding your own, you can find a lot of good used CNC stuff on ebay. Looking forward to seeing what you come up with for your own build.
@intjonmiller
8 жыл бұрын
Great video and great build. And I LOVE that clamping set up! What I think might not have been clear to viewers who are not familiar with CNC designs and cutting forces in general is that the reason the flex you demonstrates matters is that the cutting bits are applying just as much force to the workpiece, so if you can flex it with your hand then it will flex while cutting, greatly reducing accuracy and cut quality/finish. I have a box of parts, including steppers and controller, given to me by my brother who never finished a gas-pipe-and-skate-bearings-CNC-build over a decade ago. I've wanted to build something like this with them, but I never have time to even think about the design, much less do anything with it. I may contact you down the road about that. I have a mill and a lathe (and a surface grinder), it's the design I lack. First I need to make room for the machine... :)
@Jer_Schmidt
8 жыл бұрын
+Jon Miller Thanks! I appreciate the thoughtful feedback about newcomers not understanding CNC forces. I didn't think of it that some wouldn't understand that, since I've had one for so long it seemed obvious to me :)
@DieterGribnitz
7 жыл бұрын
Going to start building a cnc this weekend. Going to use 4 gantry rails instead of 2 with the motor mounted in the middle. This should eliminate nearly all possible flex.
@mmilesg
8 жыл бұрын
I did purchase a commercial CNC of similar dimensions and it was really because I didn't want to take the time to build, troubleshoot and tweak a custom build. I wanted something that would work out of the box and provide the stiffness I needed to carve heavy tropical hardwoods and brass/aluminum parts. I can flex the gantry, but I need a dial indicator to see the movement. Is it worth the extra $5k? For me - right now - YES! But everyone's use case is different. I wish I had the time to build a CNC from the ground up, I bet it's very gratifying. That being said, I have to say your machine is very impressive, and I bet it'd handle 90% of the jobs I use mine for. The very next project I'm going to do is setup my spoil board to accept a clamping system like yours. It is by far the easiest/most solid system I've seen, and I love that I wont have to worry about crashing into my clamps. Thank you!
@Jer_Schmidt
8 жыл бұрын
+Miles Garrett Just curious, what CNC did you buy?
@mmilesg
8 жыл бұрын
I got the CNC Router Parts Benchtop Pro with the electronics kit . Then I proceeded to upgrade it with spindle/VFD and several other bells/whistles. I have to admit, even with a lot of the construction done for me, it was quite a learning curve to get a handle on running it safely and reliably. Just the machining aspect was enough for me; figuring out optimal feeds, speeds, and many broken bits later I feel pretty good about it all.
@metals2546
7 жыл бұрын
Not even sure how I got here, but glad i did. Excellent presentation and a joy to see this level of skill displayed. I would love to purchase any CNC you would build, but seeing as I live in Canada, everything is somehow two or three times as expensive, so probably could not afford it.
@ryanlangan1060
8 жыл бұрын
I've been fighting my CNCShark for years. This is a great mod that I'll have to do on mine. Thanks for the info!
@Fosforitofercho
7 жыл бұрын
You made an awsome design , is incredible the simplicity and funtionality of your machine
@steamsearcher
6 жыл бұрын
Building is the only way to go! Also got an abandoned Prusa for 150 pounds we are in England. You are right about the handheld routers PANTS!!!
@larslake
5 жыл бұрын
You did a good job with this video, Jerry. Very informative. Thanks
@Professzore
7 жыл бұрын
Damn it... It was good. Congratulations for you work and all design ideas you've shared. Appreciate it a lot.
@sergiocanesin
7 жыл бұрын
Finally someone who knows what is talking about! Don't worry about the quality of the video: it's great. The important thing is the quality of theINFORMATION and this... is irreproachable, really. Thanks, Jeremy.
@grizzlypeg
7 жыл бұрын
Could you elaborate more on why the 1/2" sides of the gantry end plates were a mistake? Overkill? As well, could you make a basic parts list of the specs of the various basic components?
@Jer_Schmidt
7 жыл бұрын
+grizzlypeg No, underkill. And way too expensive, mostly because of having them water cut. If I would have engineered it a little better, I could have made stronger gantry ends with less material, therefore cheaper and better. For example, two 1/8" plates, 2" apart, with some sort of webbing between them would be far stronger than a single 1/2" plate. I'll have a parts list once I finish my new design.
@crazyrussianwoodshop3957
8 жыл бұрын
Thanks, Jer! It was helpful. If you start making them I'll might consider buying one. Michael
@Jer_Schmidt
8 жыл бұрын
+CrazyRussianWoodShop Thanks! I'm not going to manufacture them, but I do plan to design one and sell the plans so you could build it yourself.
@garyg1254
6 жыл бұрын
Does that little bit of twist that you show at 13:38 really matter that much? I mean looking at the bit that you have installed I think that would snap off long before the gantry would ever start to twist. A question, where did you get the gantry rails. I have a China 6040 with a 2500 water cooled spindle and I want to change from the unsupported rails it came with. It doesn't have as much twist as you show but I am concerned with accuracy. Anyway, great video.
@Jer_Schmidt
6 жыл бұрын
If you want really accurate results, that twist is devastating. You get half that much twist with only about a quarter the force, so, especially if you have a larger bit installed, it’s almost impossible to get an accurate result. IMO you should never be able to visibly warp any part of a CNC machine by hand. I got the rails from eBay...I don’t remember the seller. Direct ship from China.
@adama1294
6 жыл бұрын
Really cool design. One thing out now that I don't think was out when this video was made was certain types of aluminum extrutions. A 4040 extrustion mounted end to side of the gantry walls would stiffen the the twisting motion you described.
@Ray_Sellner
8 жыл бұрын
Thanks for posting your video. The pressure you exerted on the Z axis is most likely greater than any cutting you'll be doing. Provided you don't put titanium on the table.
@Jer_Schmidt
8 жыл бұрын
+oned4metwo That's true, but consider that even a tiny bit of force will flex it some. Any flex at all is a bad thing.
@mike_van_in
7 жыл бұрын
Your videos are superb, Jerry. Excellent production!
@nathanroberts7272
5 жыл бұрын
Very informative video. Nice explanation...!!! Keep continuing posting videos like these.
@hudsonriverlee
5 жыл бұрын
Well Jeremy-- for aluminum, go for the Scraps, if you live near any lakes, Dock builders will have scraps,, they will,even weld pieces together, .. anyhow, great video...
@imtiazamjad
6 жыл бұрын
Thank you ,young man! Your video was very helpful.Keep up the good work.
@edmacridotcom
7 жыл бұрын
Very cool! Thank you for your reply, I will be waiting and watching!
@PiefacePete46
8 жыл бұрын
The content more than makes up for any video quality shortcomings... (and any that were there were not annoying) Good viewing, and informative as always. Many thanks.
@Jer_Schmidt
8 жыл бұрын
+John Colvin Thank you!
@staalmaffia
8 жыл бұрын
that holddown system you have is something very simular to what actual machineshops use to mill stock in 4-5 axis cnc-mills
@MarkWithers2
7 жыл бұрын
I too would be interested in the $800 CNC video and plans. You might make it into a series.
@Navigator777777
8 жыл бұрын
Poor Sharp CNC. Inspiring people like you to do the job they didn’t do. Well done video! @ minute 9:17 “As a hand held router it sucks” LOL I have a 1975 router Black and Decker router I bought before all the safety BS was built into most tools making them dangerous as hell! This 1975 router is a joy to operate. I simply can’t find a new router that has a simple on off switch. What has happened to us?
@lillwolff2353
7 жыл бұрын
Do not fret about the expense of the gantry sides. The HD had been reinforced with aluminium plates. It made no difference to the wobble in the gantry, the top rails were slightly longer than the bottom of the gantry was wide, so the plastic sides vere still bent slightly outwards, in an effort to avoid gantry wobble. It did not work. I used 1/2" aluminium for the sides. I found, that because the extruded aluminium rails were not supported, when you used the supplied clamps, they just lifted up the rails in the middle and allowed the material to bow. That's why I bolted a solid sheet of aluminium under the table. I still use the control box, it is a helluvalot easier than the Mach3.
@paulmurphy612
7 жыл бұрын
Your video is not low quality. I enjoyed it very much. Excellent.
@donfillenworth1721
8 жыл бұрын
Nice machine design! I also built my own machine with similar size bed. I really like your clamping solution! Thanks for sharing.
@jacobframe8769
8 жыл бұрын
I think your videos are getting better and better! Good job on the content, presentation and your on camera presence.
@Jer_Schmidt
8 жыл бұрын
+Jacob Frame Thanks! Glad to hear that.
@Blue.star1
7 жыл бұрын
use 3 bars in a triangle to support the gantry. what power motor u used when u were stopping the movement @8:57 u call it y axis motor , r they closed loop , I can get ss 202, 314 blocks , bars, plates, 1kg weight , for 7 dollars , or en31 for less price all cut , drilled etc
@christianscustoms6429
5 жыл бұрын
Funny you dislike that router for handheld use. Maybe I'm just used to using cheap routers, but that Bosch has been a complete game changer for me, with the fixed and plunge base. Totally agree that its amazing in a table as well. Either way, that's a wonderful CNC and have a ton of respect for your videos and builds!
@Jer_Schmidt
5 жыл бұрын
The things I dislike most are the placement of the power switch and speed control, and the lack of a spindle lock. Those things are all fine if the router is mounted but are a bit un-ergonomic otherwise.
@christianscustoms6429
5 жыл бұрын
@@Jer_Schmidt I can definitely agree with you on all of those things. The switch isn't great and is a bit unsafe and no spindle lock is just a hassle. Once it's set up and on it works great but I can absolutely agree with you on all of those points
@blackfoxmachining
8 жыл бұрын
Just finished building a modified OX CNC for about 600. I would love to see you build an even more rigid machine for 800! Keep up the great work. Love your videos.
@Jer_Schmidt
8 жыл бұрын
+Benjamin Engle Thanks!
@wolframherzog636
8 жыл бұрын
You could easily improve your gantry by adding a stripe of 1" birch plywood between the two horizontal aluminum angels. That would turn it into a u-profile.
@Jer_Schmidt
8 жыл бұрын
+Wolfram Herzog That wouldn't do much in the way of preventing twist. A tube is extremely resistant to twist, which is what I need to address.
@lillwolff2353
7 жыл бұрын
I replaced the black plastic plate on the back with a checkerboard plate. I like your open design though.
@nermin1985
7 жыл бұрын
Hello.Jeremy, Interesting we threaded rods for x, y. Where did you get it and what its designation if you can tell me, thank you.
@patbarrett9263
5 жыл бұрын
you did a good job of building a rigid cnc router, way to go!!
@Moogentro
8 жыл бұрын
Dam i love a good honest talk about tools. Great video and thanks for not misleading your viewers
@Jer_Schmidt
8 жыл бұрын
+Moogentro Thanks! I'm glad you appreciate my honesty, because I know tool companies don't! :)
@Moogentro
8 жыл бұрын
hahah not at all. but screw 'em. they been selling us garbage for long enough.
@alsampath
8 жыл бұрын
looking forward for your new CNC Build.
@adrianomazza4343
8 жыл бұрын
Hi Jeremy, It would be great if you heve the CNC you did documented. The plans, you know, will be very useful for those who wants to build one.. and you can also make money... I would be interested in seeing that build and the materials sourced. Great Job !!!
@Wordsnwood
8 жыл бұрын
An other question, I think, is if you have a use/need for one, or just want to build it for the fun of it. I also have an X-carve, but with the original wimpy motor, and I have not really found that much use for it in my woodworking.
@Jer_Schmidt
8 жыл бұрын
+Wordsnwood (Art Mulder) Good point. I think the X-carve is perfect for those who want to just play around with CNC, but the real beauty of a CNC is how perfectly precise they are, being able to quickly cut complex parts with 0.001" precision. And an X-carve lacks that precision...
@MrCoaster36
8 жыл бұрын
I never buy plans for anything but I'm going to buy yours when you post them. Hopefully soon.
@bobwatkins1271
8 жыл бұрын
Slightly off topic, but what issues did you find with the Bosch router for handheld use?
@Jer_Schmidt
8 жыл бұрын
+Bob Watkins My biggest problem is the height adjustment mechanism. Every time you unlock the cam lock on the base, the router goes a bit cockeyed. You can then adjust the height, but when you lock it then the router straightens up in the base. So it's pretty much just a trial and error game to get the height set. Dewalt and Porter Cable get it right with the threads around the body; with those the router never slumps to one side. Aside from that the ergonomics are just really bad. The switch and speed dial are impossible to reach from the handles. And don't even get me started on the plunge base...it has serious quality issues.
@marceaton3128
8 жыл бұрын
I have trouble tying my shoes, so I bought a ShopBot. I had no training and they have a two day school you can go to before buying the CNC. I, like a dummy bought Aspire because I didn't think V Carve had enough in it. That was $1,900.00. You were wise Grasshopper.
@PANKAJKUMAR-cz7zk
2 жыл бұрын
How much is the cost of this CNC rotor machine and how much will it cost to make and what parts are needed please tell in full detail
@The5upermann1
8 жыл бұрын
Very impressive! I did not realize that you actually built that yourself. I think most people are not capable of building a CNC machine.. Great engineering and great work!
@Jer_Schmidt
8 жыл бұрын
+The5upermann1 I think most people are completely capable of building a CNC, but underestimate themselves and think they can't.
@nickparkin8527
7 жыл бұрын
I used a ShopBot CNC mill at my school. Its an industrial one that costs $12,000 and it has no wobble on any parts whatsoever and it cuts like nobody business. Its great but $12,000 is a bit steep. Its the best one I've worked with so far, and has pretty much no quirks.
@PlonkaGames
7 жыл бұрын
Great video! Looking forward to your design. I've been looking for a cnc that I can use to cut small plywood parts for puzzles I make and also engrave / decorate wooden boxes with names, images etc. Will yours be able to engrave on to silver plated gifts ? Hip flasks, compacts, cufflinks etc ?
@TraceePettee
7 жыл бұрын
Jeremy kiddo, you are just way too smart! Thanks for sharing
@jeffy911
8 жыл бұрын
Yessss!!! Please, please, please build a CNC machine. P.S. Jeremy, did I ever tell you you're a genius?
@BlueOceanDesigns
8 жыл бұрын
Good on you for getting rid of the rigidity problems. Just had a look at the Shark pricing and it is quite expensive for what you get. I've come to learn if you do fine and detailed work then there is no substitute for rigidity and quality and some people just don't have the time or skill to build their own machines. I do think these companies catering for the cheaper systems can make the systems rigid without driving the cost up too much. Keep up the good work :)
@Jer_Schmidt
8 жыл бұрын
+FrameToFrame I agree, rigidity is key and I wish the cheaper machines would put a little more focus on that. Thanks!
@dgb5820
8 жыл бұрын
Wow that was one of the best videos I have seen for a while, as I would like to research more about building a solid CNC machine your presentation was fantastic keep up the great work
@VroladesignIta
8 жыл бұрын
Thank you for this useful tips, I will take care of them when I will build my CNC...
@thiscommentwasposted262
4 жыл бұрын
GOOD VIDEO! THANKS! I was thinking I wanted an X carve, but now that you mentioned that they are weak, I change my mind. I already started building a small model of a cnc, i will see how that goes. if it goes well, i will duplicate on a larger scale.
@jeffvader2675
8 жыл бұрын
You betcha! How about going one step further and supplying (selling) a kit of parts, plans and everything else required for a half-wit DIYer like me to assemble myself (in the UK)? Thanks, you're a very clever chap!
@Samirsinno1
6 жыл бұрын
Hi, I need your help :) I’m new to this domain, and I would like to purchase a desktop CNC like yours in order to produce miniature designs. The materials that I intend to use are copper, and wood. I noticed that the there are so many options when it comes to purchasing a CNC router and I don't want to make the wrong choice. Could you tell me please what are the more interesting specifications, and how to choose the most accurate one?
@lionelchevalier4021
6 жыл бұрын
Hello Jeremy, I am delighted to see this video (which dates a bit ..) because you describe very well the concerns that can be encountered on a CNC of poor quality. Personally I'm at my third design, the only problem I have to meet is to have a flat table related to the spindle but my last CNc will have an independent adjustable table and I can drop to possibly use with a plasma cut. Congratulations for your journey, I subscribed because I often came across your videos in the last two years that are always fair and quality. Cordially.
@Jer_Schmidt
6 жыл бұрын
Thank you! About the flat table, I strongly recommend using a machinable table so you can use the machine itself to flatten it. Very effective and it leaves the table absolutely perfect with respect to the travel of the bit.
@lionelchevalier4021
6 жыл бұрын
Yes, thank you for this valuable advice but I had flattened my table with a specific wood bur, but it was not top ... In addition I have a fairly large table currently (2200mm x 1200 mm) Good continuation...
Пікірлер: 954