Kudos 2U Dude! Built from scratch and even put a thumb on it as well. I'm not sure if I've ever seen anyone do that. Great work buddy! Truly a one off excavator to be proud of...
@dannyclark9820
6 жыл бұрын
Unparalleled talent. You sir are an aluminum master
@blaketurner6492
4 жыл бұрын
Really great craftsmanship. The claw on the bucket my favorite part heart detail
@smnkm4ehfer
7 жыл бұрын
Absolutely BEAUTIFUL work man! Super nice!
@dadsgaragefmab3379
9 жыл бұрын
Great job on the build....really like all the pics !!!
@Robert-hf2nn
8 жыл бұрын
At first when I saw the arm I was like awesome, but when it was painted already it looks like the real deal. Nice details. Nice vid.
@lbyerly
8 жыл бұрын
I could sit and look at your slides all day but I don't want to run out. I made a crawler crane for my final project in tech school. I took drafting and my portion was the track system for it....but it lead into just doing it all because everyone else was busy so I really admire this one...mine was just poster board but it took me an entire night to cut out linkage and tooth pick them together for the chain. the wheels, crank arms, and turn table base were wooden. I used flaps of rubber for the track/track pads because I didn't have enough time to make them any cooler. but the cab was poster board and once i got started going at it i just kept getting more and more ridiculous and detailed. tinfoil windows. my partner made a really awesome boom with square dowel rods and we used a bobber for the wrecking ball. wish I still had it but I have the experience and now the inspiration to do it again for fun! you're awesome!
@RCP57
8 жыл бұрын
+l byerly Sounds pretty neat!
@lbyerly
8 жыл бұрын
It was, I don't even have a single picture cause I'm and idiot. We didn't even take one for in our reports.
@RCP57
8 жыл бұрын
+l byerly Sounds like something I would do! I am getting better now but I still don't take pictures of a lot of small stuff. I always think "I'm never building that again so why bother". 6 months later I am doing it again but can't remember how I did it and have no pictures to reference.lol
@lbyerly
8 жыл бұрын
RCP57 awman,yea in that instance, id be pissed! haha i really like your slide show presentations you do. i applaud your lack of laziness : ) feels like I'm hanging out while your building it....as creepy as that sounds, i hope you know what i mean
@RCP57
8 жыл бұрын
+l byerly Well thanks. I've kept myself pretty busy building this stuff over the last few years. I'm glad that someone actually watches the build videos I put up. Maybe someone will learn something from them even if it's how not to do something.lol
@frankwhittemore9149
8 жыл бұрын
you just blew me away! thank you for sharing. wow nice work.
@wayne750711
6 жыл бұрын
hello!! excuse me, could you tell me what kind of tool do you use in welding aluminum?
@MD-yr2lg
4 жыл бұрын
Me impresiona enormemente el trabajo que realizas. Nunca imaginé que se pudiera hacer tal sofisticación a mano.
@Trucker1970
9 жыл бұрын
INCREDIBLE!!!! that's talent
@RCP57
9 жыл бұрын
frank smith Thank you!
@jonnirc6843
9 жыл бұрын
complimenti un altro capolavoro.great job
@OldIronRC
9 жыл бұрын
so awesome
@skiffremo
9 жыл бұрын
what value pra vc manufacture replica identical to that?
@tushargirigoswami931
6 жыл бұрын
But were will we get all parts to make it
@alexandre.studio3d
7 жыл бұрын
Your video gives me inspiration to drop in this hobby. I just need to study more about hidraulic systems.
@JammerEd2
5 жыл бұрын
Very nice work Reg. Keep up the good work. Jammer
@SHAKITFAST
9 жыл бұрын
That is AWESOME Reg !!!!!! Your right Bulldozer Brian his work is unbelievable !!! I know first hand , I have one of RCP's dump boxes and he is currently building me a half round trailer dump !!!! BEST in the business !!!! My pieces are museum quality and they run even better !!!!
@RCP57
9 жыл бұрын
Hey come on now Keith, lets not get crazy!lol Thanks for the compliment!!!
@donatello841
6 жыл бұрын
Stupendo
@cat977loader
9 жыл бұрын
Really good work, thanks for sharing with us!
@RCP57
9 жыл бұрын
cat977loader Thanks for watching my videos!
@ecrcmodels
9 жыл бұрын
Very very good all yours projects !! Professional builder ! Hug
@zzzz111ization
7 жыл бұрын
you use hydraulics valve right? where did u find the hydraulics pump?
@FranciscoGarcia-uc1dr
8 жыл бұрын
increible trabajo 😉
@yasons9531
4 жыл бұрын
hi i have question what for reciever i need for bagger and what Remote control
@armenvegas
5 жыл бұрын
Amazing skills. Soo incredible.
@RCP57
5 жыл бұрын
Thank you
@57chevy350
8 жыл бұрын
So cool I want one ! nice work sir !
@RCP57
8 жыл бұрын
+57chevy350 Thanks!
@christerjohannessen61
8 жыл бұрын
hey how much will you have to squall a Volvo 300 to me have been searching long after volvo
@mars191083
8 жыл бұрын
magnifique!!!!!
@yasons9531
4 жыл бұрын
Hi for what are this two plates
@danielazad9561
9 жыл бұрын
Excelente lo felicito
@tushargirigoswami931
6 жыл бұрын
Nice
@rukinaa
6 жыл бұрын
This is just amazing to watch! Love it really, great job on this. So I was wondering... Now I have never built nor designed anything like this but wouldn't it be possible to put a longer helical gear inside the track frame that drives the track sprocket as to not have the motors stick out towards the inside of the undercarriage? I'm pretty certain that should work and make it look just that extra bit neater and "real" but that is just my own opinion. Let me know what you think about that!
@diyelectronics2156
8 жыл бұрын
Awesome! I want to see how you made the tracks, you kind of skiped that, can you post some pictures of how you made them?
@dirtydsrc
9 жыл бұрын
Once again, Amazing work.
@RCP57
9 жыл бұрын
Dirty D's RC Thanks!
@HarryHov
7 жыл бұрын
how many lbs?
@natewst
9 жыл бұрын
You are an amazing builder, I want to save up now to have you make me something
@RCP57
9 жыл бұрын
Thanks very much!
@maapetz
6 жыл бұрын
Hi, the hydraulic system and the actuators, did you buy them or did you do them yourself? If you bought it, could you enlist me where?
@737big
7 жыл бұрын
очень все охрененно получилось!!!!!
@BigDaddyBulldozer
9 жыл бұрын
Wow ! That's Freakin Cool ! You sure do put alot of hard work and lots of hours into your builds ! Talk about Dedicated to sticking with it and gettin the job done. But the End Product is WELL Worth the Bizzillion hours you put into it. Awesome Work, Well Done ! Thank You For Sharing the Build Pics with us.
@RCP57
9 жыл бұрын
Thanks very much! Yes, lots of hours in a short amount of time.
@henriquenoronha3180
9 жыл бұрын
cool friend
@FierceMotorworks
9 жыл бұрын
were the track links also made from scratch or were those bought?
@RCP57
9 жыл бұрын
Yes and no... It's some sort of carpet trim that I cut to size and attached to the chain with 4-40 bolts and nuts.
@UnitCrane514
9 жыл бұрын
Hey RCP do you do RC conversions for other people?
@RCP57
9 жыл бұрын
Sometimes....
@hongquanauto5161
6 жыл бұрын
I want a design. how much is it?
@billyproctor9714
9 жыл бұрын
Nice to see your construction tech. Would you share what you are using for a pump? Cheers
@RCP57
9 жыл бұрын
The pump itself is from Jung fluid in Germany. The rest of the hydraulics were made by my Father in-law.
@rickboo6776
8 жыл бұрын
your work is very good im just starting out making things from scratch not as easy as I thought haha my first project is a trommel
@RCP57
8 жыл бұрын
+Rick Boo Thanks, yes it's a lot of work but it will get easier as you go so don't give up!
@user-sb7xp1de9o
8 жыл бұрын
Супер !
@RedSkyGrove
8 жыл бұрын
hey where did you get your blueprints from? iv been looking for months for some. i whent to dealers too and they would'nt give me any blueprints so i need help with finding some Thanks
@RCP57
8 жыл бұрын
+RedSkyGrove I didn't have any. Just used the basic info on their site and collected as many photos as I could from the net. It was tough to find pictures at the time because it was a very new machine. Lots of photos available now to build from.
@MrTheballer19
4 жыл бұрын
What grade of metal did you use for this build? Amazing job by the way.
@karlkivistik4079
5 жыл бұрын
Hello! I just got into this rc stuff. All those models are so expensive so i tought maybe i could build on by myself. Could you please share your measurements and drawings?
@RCP57
5 жыл бұрын
The only drawings I had are the ones in the first part of the video. I built the excavator from pictures and info from Volvo’s website at the time.
@Sibalvolvo500
9 жыл бұрын
Oh very good your good!!
@RCP57
9 жыл бұрын
truck volvo Thank you!
@dng0077
9 жыл бұрын
very great job! you are an authentic metal and electronic modeller, congratulations! I like very much. Too many hours, doesn't it?
@RCP57
9 жыл бұрын
+David Navarro Thanks very much!
@yasons9531
4 жыл бұрын
and it s bicycle chains or
@jasonconway5197
5 жыл бұрын
Is the majority of the sheet you work with 16ga or 18ga? You are very talented, nice work!!
@wandi_roma25
8 жыл бұрын
Can You Give me Video of How To Make a Track Assy ?
@RedSkyGrove
8 жыл бұрын
cool im looking to try to build that exact one for my self i own a maching and welding shop and i am a rc collector trucks planes helecopters you name it and im good at tig welding so im going to give it a shot oh and where did you get the hydraulic kit from? and motors and stuff if you could send me the links for that stuff that would be great Thanks and great job i love your work
@RCP57
8 жыл бұрын
+RedSkyGrove Cool. The hydraulics on this were all custom made other than the pump. It came from a supplier in Germany but is made by Jung Fluid. Make sure to post up your progress!
@igormoreira9978
6 жыл бұрын
Pode me passar as medidas do seu projeto?
@lipeminiaturas-rc871
5 жыл бұрын
Qual o passo da corrente que vc usou pra fazer as esteiras
@RCP57
5 жыл бұрын
#35 pitch
@derrickspoelhof3964
9 жыл бұрын
The best things are always homemade.
@mclr.cfabricationandperfor5255
8 жыл бұрын
dude I just now viewed your Volvo excavator build. (Wow) really, I cant wait until I can weld aluminum. what are you using to weld. And do you have use of a cnc machine.
@RCP57
8 жыл бұрын
+MCL R.C FABRICATION AND PERFORMANCE I've built a bunch of stuff.lol No CNC. I use a Lincoln TIG welder.
@user-ie8iq8xd6k
7 жыл бұрын
из какое стали делали экскаватор
@RedSkyGrove
8 жыл бұрын
thanks for the info i'll keep you posted
@RCP57
8 жыл бұрын
+RedSkyGrove No problem! I look forward to your progress!
@RedSkyGrove
8 жыл бұрын
um i checked out there website what would the pump model number be?
@RCP57
8 жыл бұрын
I'm not sure but I think it is an HR-5?
@RedSkyGrove
8 жыл бұрын
perfect Thanks and does it have the motor included?
@RCP57
8 жыл бұрын
+RedSkyGrove No not this one. It was just the pump and I put together the rest. Magom HRC is selling a Jung pump with motor, relief valve, and small tank as a unit for the best price I've seen. You might want to check that out.
@diegoalejandroherreragonza4099
6 жыл бұрын
Hola Saludos desde Colombia. espero que estés muy bn. Caballero quisiera saber cuanto es valor de una retroescabadora... Agradezco su atención. Espero me pueda dar una respuesta. Gracias
@hendripujo569
7 жыл бұрын
cool,, Indonesia say "KEREN" for sale ?
@dhmhtrhsmesshnhs4558
8 жыл бұрын
for, very good job, I can buy a same??
@grzegorzmazur4606
6 жыл бұрын
crazy speed change foto
@omomaomoma3569
5 жыл бұрын
Can i buy
@iremkirlioglu8723
4 жыл бұрын
Brother can you give it to what
@danielazad9561
9 жыл бұрын
Very good
@RCP57
9 жыл бұрын
alex azad Thanks
@danielazad9561
9 жыл бұрын
do not speak English, but I like your videos want to make a backhoe as well as yours
@RCP57
9 жыл бұрын
alex azad Thanks very much! Good luck with the build!
@fpego
5 жыл бұрын
like
@felixantoniogonzalezalzate4469
7 жыл бұрын
hola como estas exelente trabjo muy bacano depronto me puede vender los planos gracias
@asifpasha443
7 жыл бұрын
I want to make project of these please help me by giving the measurements and design plzzz... hell me to make my final year project
@RCP57
7 жыл бұрын
Look at Volvo's website. That's all I did.
@asifpasha443
7 жыл бұрын
RCP57 send me at least sketch of that
@RCP57
7 жыл бұрын
Go to Volvo's website. Drawings are there. Make your own sketch from that. I don't have drawings to give you.
@luisdebrito1582
6 жыл бұрын
Por favor pasa o desenho Desa escavadeira para mim queria fazer uma também
@luisdebrito1582
6 жыл бұрын
Vc não pode me mandar desenho dela eu quero fazer uma
@ryzvlogz7178
6 жыл бұрын
Boy I wish I could by a rc digger but for a hydrolick one there £1,000 and I can’t afford that
@mangalsutar3933
5 жыл бұрын
Please make truck making video
@ricardoantonio2020
7 жыл бұрын
muito bom suas miniaturas de caminhões tratores etc...queria presentear meu filho com um desses pena que não sei fazer um desse
Пікірлер: 115