This explanation is really helpful and necessary! Thank you very much!
@stikle
3 жыл бұрын
Thank you! This made it very clear for me finally. I am struggling with the math for my CPhT test and this is a lifesaver. Kind Regards
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Thank you Stikle for watching and for the comment. Keep up the good work.
@rexeetv8924
6 ай бұрын
I can’t stop subscribing. Thank you so much sir 😊
@imthecoolest50
2 жыл бұрын
My lecturer just read the answer to this type of calculation, without explaining what happens in that calculation so I had to look this up. Thanks.
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Glad you found the video helpful Furret. Thank you for watching and for the comment. Welcome to the Pharmaceutical Calculations community.
@ahmadfares5243
2 жыл бұрын
Again excellent Dr Dangua Following pharmaceutical calculations with you, 👍👍👍👍💚
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Thank you for the kind comment Ahmad. Keep up the good work.
@nii3589
2 ай бұрын
Solid! Informative!
@PharmaceuticalCalculationsEasy
2 ай бұрын
Thank you for watching. Appreciate the kind comment.
@kenzietownsend6644
10 ай бұрын
3 Components starts at 3:49.
@AminaAdokor
2 ай бұрын
Thanks very helpful. Pharm.🎉
@mohammedfarrag1
2 жыл бұрын
Excellent explanation , Really appreciate your time and effort Keep up the great work Thanks :)
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Thank you Mohammed for watching and for the comment. Welcome to the Pharmaceutical Calculations community.
@safiyyah.o3602
8 ай бұрын
Thank you, this is so explanatory
@PharmaceuticalCalculationsEasy
7 ай бұрын
So glad you found it helpful, @safiyyah.o3602! Thanks for watching and for your kind comment. 🌟
@strivingforexcellency
Жыл бұрын
7:14 literally was confused and u made it clear
@PharmaceuticalCalculationsEasy
Жыл бұрын
Glad the video was helpful. Thank you for watching and for the comment.
@oluwalayomibeeniagbebunmi5336
7 ай бұрын
Thank you. My lecturer almost didn't allow me enjoy the topic.
@PharmaceuticalCalculationsEasy
7 ай бұрын
Glad it was helpful! Thank you @oluwalayomibeeniagbebunmi5336 for watching and for the comment.
@akwaboahdaniel
Жыл бұрын
What a lesson!!!! Thank you sir
@PharmaceuticalCalculationsEasy
Жыл бұрын
Glad you found the video helpful, REAL MADRID. Thank you for watching and for the comment.
@ranahegaze1596
2 жыл бұрын
thank you so much u saved me i was desperate to understand this
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Glad you found the video helpful Rana. Thank you for watching and for the comment.
@Peacecommunity777
2 жыл бұрын
Thank you
@PharmaceuticalCalculationsEasy
2 жыл бұрын
You're welcome. Thank you Arunz for watching and for the comment.
@jonasagyemang1926
Жыл бұрын
Thank you very much. Your video tutorial is easy to comprehend. Please I have a question, I would be glad if you could help me. Produce 500mL 10% dextrose in 0.9% NaCl. Available components are ; 250mL 50% dextrose 500mL normal saline 500mL 5% dextrose 2 bottles of 3% NaCl (30mL)
@chiadchiadi4733
Жыл бұрын
The best tutorial !!!
@PharmaceuticalCalculationsEasy
Жыл бұрын
Thank you Chiad for the kind comment. Much appreciated.
@user-ne3bm7fb8r
6 ай бұрын
Thank u very much sir. In the aspect of arrangement of the concentrations you arranged the higher concentrations for the first question and the last question you arranged the second higher concentration to the lower concentration which makes the answers differ, I wanted to know if it is correct to do it at any arrangement
@tammydavis9792
3 жыл бұрын
Thank you so much!! I actually understand this now!
@PharmaceuticalCalculationsEasy
3 жыл бұрын
You are welcome. Thank you Tammy for watching and for the comment.
@elisophiaaa
3 жыл бұрын
so many tnx to you, calc is becoming a fun for me by your videos :)
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Glad you are enjoying calculations Elmira. Thank you for being an active part of the pharmaceutical calculations community. Happy studying.
@galacticbutterfly5590
10 күн бұрын
Why is the proportion included for the 50 % solution in the final ratio when the mixture of the 70% and 20% already achieves the 30% of the desired mixture
@MrOliveroky1
Жыл бұрын
Amazing stuff. Thank you.
@PharmaceuticalCalculationsEasy
Жыл бұрын
Thank you Shaun for watching and for the kind comment.
@realstory1819
5 ай бұрын
Thank you sir ❤ may you explain for us ,4 component
@PharmaceuticalCalculationsEasy
5 ай бұрын
Thank you @realstory1819 for watching and for the comment. Here is a link to a video we made in response to your request: kzitem.info/news/bejne/1a9_y4ytoZmCpHosi=ABiwYkTtEt5dxS8I. Hope you like it and share it.
@oghosaigbinedion
Жыл бұрын
Thank you so much😭😭😭
@PharmaceuticalCalculationsEasy
Жыл бұрын
Thank you oghosa igbinedion for watching and for the comment.
@jefersongueiros7414
4 жыл бұрын
excellent work, it was not taught in my graduation ...
@PharmaceuticalCalculationsEasy
4 жыл бұрын
Glad to hear that liked the video. Thank you for watching and for the comment.
@aribisalaesther-fd2nm
10 ай бұрын
Thank you so much, but the last example why do you have to calculate 95 and 60 first, why not 60 and 50?
@kanishkadissanayake567
3 жыл бұрын
Thank you...its very clear ..
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Thank you Kanishka for watching and for the comment.
@nathanbenks9104
3 жыл бұрын
Thank you for the information
@PharmaceuticalCalculationsEasy
3 жыл бұрын
You are welcome Nathan. Thank you for watching and for the comment.
@ubagodwin3717
2 жыл бұрын
Too helpful♥️♥️
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Thank you Uba for watching and for the comment.
@strivingforexcellency
Жыл бұрын
Tq man
@jaztyneambalit4124
Жыл бұрын
On the first example for three components, how did you decide that the difference of 50- 30 and 70-30 is to be added? Why couldn't other differences be added instead? I'm confused on this part.
@PharmaceuticalCalculationsEasy
Жыл бұрын
Thank you Jaztyne for watching and for the comment. To determine the number of parts of the 20% solution, you subtract the desired concentration (30%) from the higher concentration. In this question, there are two higher concentrations. So, we subtract the 30% from the 50% and the 70% and then we add them to determine the number of parts of the 20% solution. An important rule regarding the alligation method is that the desired concentration must always be between the higher concentration and the lower concentration. That is why we have the 50, 30, 20 combination and the 70, 30, 20 combination. Hope this helps.
@habibdawar1106
3 жыл бұрын
very impressive
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Thank you Habib for watching and for the comment.
@aduraotuka4950
2 жыл бұрын
thanks so much for this video. Please I have a question from the last calculation does that mean that the numbers are arranged in order of the highest first? like how you arranged the 95 70 60? not that the 70 was meant to be btwn the 60 and 50?
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Thank you Adura for watching and for the comment. Regarding your question, the desired concentration must always be between the closest higher concentration and the closest lower concentration. So if our desired concentration was 55% instead of 70%, then the 55% is between the 60% and the 50%. Hence, we will arrange it as 95 60 55 50. Hope this helps. Keep up the good work.
@harshaneranjan6389
4 жыл бұрын
thanks a lot from Sri Lanka.
@PharmaceuticalCalculationsEasy
4 жыл бұрын
Thanks Harsha for watching and for your comment.
@enriqueherrera9617
3 жыл бұрын
good explain
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Glad you like the video Enrique. Thank you for watching and for the comment.
@rosssales7385
3 жыл бұрын
Hi! your video is very helpful but I just have a question. what if the desired concentration is lower than the lowest given concentration?
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Glad you found the video helpful Ross. Whenever you are altering the concentration of a product, the desired concentration must always be between the concentration of the components you are mixing. Hence, at least one component must have a higher concentration than the desired concentration and at least one component must have a lower concentration. If it appears from a question that the desired the concentration is lower than the lowest given concentration then it is likely that there is another component usually a diluent (e.g., water) which has a concentration of zero. Hope this helps. Let me know if you need more clarification. Thank you for watching and for the comment.
@rosssales7385
3 жыл бұрын
@@PharmaceuticalCalculationsEasy Thank you so much!
@elizabethmbwilo8697
4 жыл бұрын
Thanks so much
@PharmaceuticalCalculationsEasy
4 жыл бұрын
You're welcome! Thank you Elizabeth for watching and for the comment.
@piupati2498
4 жыл бұрын
Thank u so much sir, ,,
@PharmaceuticalCalculationsEasy
4 жыл бұрын
You are welcome. Thank you Piu for watching and for the comment.
@moh-zw1243
4 жыл бұрын
Awesome explain. 👏👏👏👍👍
@PharmaceuticalCalculationsEasy
4 жыл бұрын
Thanks for the comment Moh-Zw and thanks for watching too.
@Gayatrisharma-pl1fn
2 жыл бұрын
Hi, could you please help me in this problem. What volume of a 1 in 400 v/v solution is needed to produce 5L of a 1 in 2000 v/v solution?
@PharmaceuticalCalculationsEasy
2 жыл бұрын
Thank you Gayatri for watching and for the comment. Here is the solution to your question: jo.my/ndtdds.
@frankcastle6849
Жыл бұрын
Volume will be 1 L
@AminaAdokor
2 ай бұрын
Grt
@PharmaceuticalCalculationsEasy
2 ай бұрын
Thank you! Cheers!
@user-wu9cs6zk9f
4 жыл бұрын
Is it possible there Anicon explanation of hypertext in Arabic
@teebaya
4 жыл бұрын
Thank yoooooou 🥺
@PharmaceuticalCalculationsEasy
4 жыл бұрын
Thank you Ph. Teeba Mohammad for watching and for the comment.
@teebaya
4 жыл бұрын
@@PharmaceuticalCalculationsEasy 👏👏🌹
@hannahmbatha46
3 жыл бұрын
Thank youuu, I would've done something completely wrong eyy
@PharmaceuticalCalculationsEasy
3 жыл бұрын
Glad you found the video helpful Hannah. Thank you for watching and for the comment.
@RicardoPerez-fd7bh
3 жыл бұрын
I don't trust this website with a crappy intro and an allah akbar accent
@AminaAdokor
2 ай бұрын
Thanks very helpful. Pharm.🎉
@PharmaceuticalCalculationsEasy
2 ай бұрын
Glad you found the video helpful @AminaAdokor. Thank you for the comment.
@aribisalaesther-fd2nm
10 ай бұрын
Thank you so much, but the last example why do you have to calculate 95 and 60 first, why not 60 and 50?
@nii3589
2 ай бұрын
The arrangement on the grid is in a decreasing order of concentration.
Пікірлер: 86