Every time I get down on myself and feel like just eating a bullet; I watch one of these amazing people that have 1/1000 th of what I have and think to myself....if I did off myself I wouldn't blame God a bit for sending me to a place like this, just to make a point. I hope the guy filming this makes an effort to help this guy and his family.
@Mike-xt2ot
4 жыл бұрын
I understand your statement. I truly do. I hope you are doing better. No bullshit.
@WowThings
4 жыл бұрын
He get paid a good amount every time I film him. Thanks for the love.
@H_A_F_GAMING
4 жыл бұрын
Life a test with no rest till the last breath. Never quit . They win if you do .
Mark Hogan You are not alone in this world Mark. Even if it may feel as if you are, your mind's "feelings" does not tell you the truth. Honestly. There is allways a way out. No bullshit Mark. Take care of your battered soul, and seek council with a proffessional, to help you through. Been there and done that... ❤️ My heart is with you.
@marcusaurelius3561
4 жыл бұрын
It's not the gear that is the focus here, it is the expertise of this man and the art of making the part. Kudos to this man and his craft.
@eccentricsmithy2746
3 жыл бұрын
Expertise? HE IS USING ALUMINUM YOU IDIOT! A expert would not use aluminum for the base metal of this automotive part.
@kw_ld
3 жыл бұрын
@@eccentricsmithy2746Haha, like you could do better.
@mrkalerkunder1076
3 жыл бұрын
SAVAGE
@mrkalerkunder1076
3 жыл бұрын
@@eccentricsmithy2746 " art of making the part" = Craftsmanship... U can't even understand sir?? ... Always be positive.... Dun be so jealousy..
@timhofstetter5654
3 жыл бұрын
But... he should have known better than to try to make an accurate copy; it's physically impossible.
@minimaldirection
4 жыл бұрын
my knees hurt just by watching him working like that
@JimNichols
4 жыл бұрын
I live in Thailand and everyone here squats like this for hours and gets straight up and walks off. ... I squat, I need 6 people to help me up and I am crippled for 3 days
@routtookc8064
4 жыл бұрын
should cast himself a chair
@Terrifier1984
4 жыл бұрын
It looks nice match would it last for any purpose ?naaaa
@3bros.925
4 жыл бұрын
You muat see Indonesian people for that😁
@ebowdan3138
4 жыл бұрын
I can't sit like not even 2 mins
@ShipperChick
3 жыл бұрын
I’ve been watching a bunch of these type of casting videos for a few months now and this man is one of a kind! He’s very neat and clean and fairly organized. Watch him toss the smallest bit of waste back into the crucible! He sweeps every last grain of sand back into the main pile! Master craftsman!! 👍🏻
@WowThings
3 жыл бұрын
Thanks for such a great commendations.
@akkadiansprayart
3 жыл бұрын
That’s absolutely incredible, I work in a steel plant forging bolts for mining supports with a massive press forge and tiny tacco furnace. The skill and craftsmanship this man has is incredible
@0MoTheG
2 жыл бұрын
Yes, but the part is just for show. He will not compete with you.
@abdulrahmanalqarni7126
2 жыл бұрын
Its not by big manufacturing its something belongs to what you love , actually this man he have a huge experience in his hobby so that he is incredible
@Regressor14
Жыл бұрын
he doing it everyday since 15
@--..--.-.
4 жыл бұрын
Forget the parts he's making. It's just amazing to watch him sit like that.
@jasontipton8430
4 жыл бұрын
Yeah my god build a work bench
@BoB-Dobbs_leaning-left
4 жыл бұрын
@@jasontipton8430 God gave him a workbench, he is agile enough to use it. How's yer Home Depot workbench going?
@alfredolimon9785
3 жыл бұрын
Yeah thats amazing I just go for a Few minutes to the toilet and I can barely walk
@brianogden9023
4 жыл бұрын
Back when I was in Junior High School when they actually educated kids and gave them skills I took metal shop for 10 weeks and learned how to do sand castings like this gentleman did. I remember it to this day and enjoyed watching him skillfully make this part.
@synheraklesa1615
3 жыл бұрын
I have great respect for these artisans. They do hard, arduous work. Greetings from Poland.
@hamanu666
3 жыл бұрын
There is a certain beauty in what he does; he looks like a man who has done this complex task hundreds of times before. Its very soothing.
@kcjones679
4 жыл бұрын
Those kids sure seem to be having a good time.
@KarimDK81
4 жыл бұрын
Like we did Before internet took over everything
@AhYes-it3mr
4 жыл бұрын
I also enjoyed hearing them in the backgroung
@thomaspayne6866
4 жыл бұрын
Not just the internet. White people aren’t having kids because women have put college and then work before children. Putting off kids results in women having fewer kids due to their older age. Plus abortions (the rate is disturbing), and birth control. This is what happens when women are “ liberated”. It means we die out.
@ankitaaarya
4 жыл бұрын
@@thomaspayne6866 sad😖
@j0lel666
4 жыл бұрын
@@thomaspayne6866 thats what commietards want so they can replace white people with immigrants etc
@Prince-zn1me
4 жыл бұрын
He needs our support to develop his workshop,tools and clothes.
@Share-zv5uw
4 жыл бұрын
Totally agree. He is amazing
@yosoydpfknr2855
4 жыл бұрын
I do this and more things support me
@Share-zv5uw
4 жыл бұрын
@@yosoydpfknr2855 Looking 4 a sponsor?
@lauri1021
4 жыл бұрын
Why?
@sepasgozar.
4 жыл бұрын
we don't need your support. the best support is that to leave us alone, and bring your army bases home, from all around the world. and spend one-tenth of the $ 700 billion military budget for hurricane victims in your country.
@davidzeledon61
3 жыл бұрын
As a child growing up in Nicaragua, I used to go to the mechanic with my father whenever he needed work done on his vehicle, and the mechanic could fix anything he would make his own parts with nothing more than simple tools. I have lived in Canada for over thirty years and here you need to sit for days waiting for a part to come in so you can get back on the road. I remember the first time my father was told that they had to order a part and that it would be five days before it would came in, he lost his mind, he almost had a heart attack!!!
@ragebash13
3 жыл бұрын
I mean there is a lot more demand for that part and it is factory new so there's that.
@grazhdanin
3 жыл бұрын
Вижу, нога идет на поправку! 😀 Кто поймёт, тот поймёт!😉 Здоровья тебе, мужик!
@sayan1667
4 жыл бұрын
He knows that this is bad quality, he wants to show us his skills and he has a Bravo from me!
@Walter-wo5sz
4 жыл бұрын
I'd like to see it installed just to see how long until it failed.
@steelavocado1
4 жыл бұрын
Walter 1408 talk to garage 54. They are willing to test anything.
@eligavia
4 жыл бұрын
Why bad quality? Did you consider what he’s using?!
@user-vi1fw4ep3j
4 жыл бұрын
@@eligavia casting require very strong cooling processes. With this kind of technology, this part wont last any heavy load, because of lots of inner stresses and bubbles. I suppose that there is just no other way to find or buy this detail, so its like last resort
@eligavia
4 жыл бұрын
Игорь Суслов thanks for clearing that up. When I read bad quality I automatically assumed aesthetics. I didn’t think about it actually being used I thought he was just showing what he can do.
@peterjc1978
4 жыл бұрын
If I sat like he was sitting my knees would be inside out. I even make a sound sitting DOWN on the couch now... His mobility is something else...
@BoB-Dobbs_leaning-left
4 жыл бұрын
@Mr. Frank 'forever 40' Garret I guess you have the couch mastered?
@29goodvibes
4 жыл бұрын
I guess he avoids processed junk food...that could be a reason why his mobility is better than ours who basically eat crap...
@SteveReynold
4 жыл бұрын
Meth
@mweezy
4 жыл бұрын
@Mr. Frank 'forever 40' Garret 😂 😂 😂
@SteveReynold
4 жыл бұрын
This guy is so hopped up on amphetamine stimulants it isn’t even funny.
@artello78
3 жыл бұрын
Aluminium gear....brilliant :-)
@fisherh9111
3 жыл бұрын
My guess is it would last less than an hour and destroy the rest of your gear box with metal filings. Hardened steel with machined gear surface would be better.
@MrDeargone
3 жыл бұрын
its just a sample
@saurabhroy7100
3 жыл бұрын
@@MrDeargone what is the use of this sample?anyone can scan and reverse it and then can apply all test related to analyse
@MrDeargone
3 жыл бұрын
@@saurabhroy7100 for youtube content bro..its all about aluminium
@dominicdecaro3757
3 жыл бұрын
@@fisherh9111 read the description
@michaelanguiano7887
3 жыл бұрын
Give that guy an Award! you can tell that gent is a pro and he takes great pride in all his works. AMAZING YES
@WowThings
3 жыл бұрын
Happy to see that you enjoyed it. Thank you so much for your compliments and stay tuned with our channel for more interesting videos.
@johnsmyth2514
3 жыл бұрын
Give this man the right equipment and imagine what he could produce.
@olafv.2741
3 жыл бұрын
Buy him a German CNC machine... This is just skills.
@questioneverything3026
3 жыл бұрын
Differential crown gears in steel ?.
@danrook5757
3 жыл бұрын
john smyth : he is using the right equipment
@danrook5757
3 жыл бұрын
Death Stranding Falling Over Sim : worm gear for a slip differential
@abdulrahmanwani6871
3 жыл бұрын
Perhaps he is Muslim who will help him?
@wesleytownsend8214
4 жыл бұрын
This gentleman is very talented and I have seen other castings he has done as well. I wish success and all the best to him and his family!
@MrMraza123
3 жыл бұрын
No gloves, no shoes, no coverall, no safety glasses nothing but still he made a successful mold. I have many tools but still couldn't make successfully an aluminum mold.
@ragebash13
3 жыл бұрын
"YOU RACK DISIPRIN!!!" Cartman. Just kidding, he probably did it his whole life or over 10 years at least and I also admire his hand work. Amazing what can be accomplished just with simple tools and hands.
@TheOriginalShakuraz
3 жыл бұрын
You need special sand, mixed with indian feet sweat.
@alfredolimon9785
3 жыл бұрын
Thats a real man!!!
@pujo28
3 жыл бұрын
I’m convinced he could keep my 2001 VW running forever!!
@bayernvorn
3 жыл бұрын
This man deserves respect. He shows what people are capable of with the simplest tools. Be grateful that we were born in a country where it is easier to earn a living.
@philipwhite8353
3 жыл бұрын
I’ve tried some sand casting myself, so I have some idea of the level of skill that this man has...it really is amazing. And with the most basic tools as well. Just amazing
@Ev-wj3lm
3 жыл бұрын
Casting metal with this degree of precision doesn’t require a lot of tools though. Casting real pieces requires to calculate a lot of things (ie metal retraction, homogeneous distribution, controled cooling...), but this man is certainly doing a nice demo for his situation.
@ramonheard2758
3 жыл бұрын
I give him credit just for sitting like that. I’d be in the hospital.
@mikede2331
3 жыл бұрын
It's the best way to sit natural, bet he don't get back pain :)
@ceddyspaghetti7905
3 жыл бұрын
You got that right? Fuck if every man could sit like that we wouldn’t need woman.... We can suck ourselves off 🤣🤣🤣
@ozzstars_cars
3 жыл бұрын
amen
@doiron12
2 жыл бұрын
@@ceddyspaghetti7905 Speak for yourself!
@ceddyspaghetti7905
2 жыл бұрын
@@doiron12 easy daisy its a joke 🤣
@user-uc3zt2jo9m
3 жыл бұрын
Удачи сил и терпения тебе брат 🇵🇰 и возможности купить хорошей обуви тебе и всей семье
@peterpaul9320
4 жыл бұрын
This job formed his body. He moves like an alien
@harrisondodge6956
4 жыл бұрын
I sit like this too. I've noticed that it's pretty rare for people of european descent but quite common in impoverished countries. I've been able to move around like that since I was a kid though.
@MultiDivebomber
4 жыл бұрын
When alien attacks and factories are destroyed .. This is a very valuable skill
@peterpaul9320
4 жыл бұрын
@@harrisondodge6956 after one hour working like that on the ground my spine would hurt a lot
@ThePoxo123
4 жыл бұрын
Legend says skynet’s first terminator models were created by this man
@catothecensor
4 жыл бұрын
Donovan Tavera correct. First model was inspired by a photo of chuck norris in “the delta force”
@beatbox9985
4 жыл бұрын
Boston dynamics
@johnabbot1585
4 жыл бұрын
The man's got skills
@mohamadmakkawy153
4 жыл бұрын
🤣🤣🤣
@simonwaite5815
4 жыл бұрын
So he should have been the target.............I'll be back.
@Ludi_na_Blude
3 жыл бұрын
Думал сначала бублик получился)) Если серьёзно, то это божественно!!!
@MakelikePRO00
2 жыл бұрын
this single man making metal working..😱😱 great piece of work 👍
@WowThings
2 жыл бұрын
Yes, thanks
@danhalfhill9169
4 жыл бұрын
An aluminum ring gear???? What will Ferrari think of next?
@PatrickBaptist
4 жыл бұрын
Yeah 25 grand for a part that won't last 1000 miles LOL.
@vincentssoul2369
4 жыл бұрын
@@PatrickBaptist in 10 min he's will do another one :)
@PatrickBaptist
4 жыл бұрын
@@vincentssoul2369 He sure was pretty quick about it... Bet next he will cast a engine block in 15mins. I need to import this guy and put him to work.
@user-dg7nh7su8q
4 жыл бұрын
Вот оно; стремление, упорство и желание. Браво!!!!
@user-to3xv5og4m
4 жыл бұрын
Ага , браво???. а если тебе этот кусок говна поставить на авто???
@user-dg7nh7su8q
4 жыл бұрын
Дело не в том чтоб на автомобиль запчасти эти, а про то что человек без верстака, вибро столов, разных причендалов, температурных датчиков и прочей храни, на коленях делает такое. А у кого-то столы, разная хрень и не получается.
@user-to3xv5og4m
4 жыл бұрын
@@user-dg7nh7su8q а что он такое нужное делает и для чего??? ты просто не смотришь каналы с нашими умельцами. Поверь наши самородки вытрут жопу этим пакистанцем. kzitem.info/news/bejne/rXqKqqChZoijdJg
@KLOTIK52
4 жыл бұрын
Оптимизация
@bmp8765
4 жыл бұрын
@@user-to3xv5og4m он делает то, за что ему заплатит толстожопый буржуин, чтобы накормить тех, кто на фоне голосит. А ещё может останется на бинт, чтобы пятку замотать. Капитализм. Мать его так
@jameshinebaugh1881
2 жыл бұрын
True skill and talent. Everybody thinks you need the best, shiniest equipment to make something happen. This guy is proof that’s not true. Bravo sir!
@leolana6729
3 жыл бұрын
Amazing video. Thank you for showing your knoledge ! God Bless!
@joejackson4202
4 жыл бұрын
Ive watched a good deal of casting on youtube. Thats got to be the cleanest result ive ever seen. Insane
@asicdathens
3 жыл бұрын
Did you notice the black sand that was burned? It wasn't just sand but a sand mixture with oil and some other binding agents that can produce the cleanest results possible. You can buy this stuff online. Also a real helical gear is made out of forged steel in a gear cutting machine and not by casting recycled old drum brakes
@raptorreaper
3 жыл бұрын
This is probably like a souvenir project by the video maker. No one will use Aluminium gears for anything.
@petetehl33t
4 жыл бұрын
respect the man for his hardwork , devotion and self-reliability and what he can do with so little resources.
@silverssonyoutube8438
3 жыл бұрын
Beautiful
@WowThings
3 жыл бұрын
Thank you! Cheers!
@phredflypogger4425
3 жыл бұрын
His aluminium crown gear would last about 5 minutes, that's if the teeth meshed properly.
@martinsebastian2917
3 жыл бұрын
JAJAJAJAJAJAJAJAJAJAJ!
@robertimler8283
3 жыл бұрын
Doubt it would last a mile down the road
@brandonmunson5747
3 жыл бұрын
I was thinking the same thing
@briancoonrod7224
3 жыл бұрын
He wouldn’t be making them if they didn’t work he’s a true craftsman but with his profession more like a baker of fine pastries it’s the art not always the science I bet his gears work great 👍
@robertimler8283
3 жыл бұрын
Brian, obviously you know nothing about aluminum and there's a reason why they are the be made out of steel
@somatic85
4 жыл бұрын
“The specs have been digitally measured in our state of the art facility “
@Arwar555
4 жыл бұрын
Lololol. Nearly choked after reading that
@Walter-wo5sz
4 жыл бұрын
ISO 9001.
@JamesAnderson-fw5ew
4 жыл бұрын
"The finest cnc milled components"
@GiNyYu222
4 жыл бұрын
@@Walter-wo5sz ISO000HAND1 😂
@sarahwebster8927
4 жыл бұрын
Lmao!
@shakalg1
4 жыл бұрын
You can see the level of expertise, no movements are waisted.
@tomadams3528
4 жыл бұрын
No time to move around looking for tools in the toolbox and shit. Hands and feet and shit .
@spooktasticaparanormal
2 жыл бұрын
An absolute joy to watch this fine gentleman work. God bless.
@javEChispas
3 жыл бұрын
reminds me of metal shop in the 7th grade. what a great man. awesome skills!
@TimeLine111
4 жыл бұрын
May the Lord keep blessing this Humble man, He is a Genius, A real one, All my admirations & respect for this humble Soul.
@THESLlCK
4 жыл бұрын
E Emmanuel just saying that gear won't last
@hamzanawaz7945
4 жыл бұрын
Haha
@ralfbond258
4 жыл бұрын
🤠👍
@oscarlumberg8865
4 жыл бұрын
Absolutely agree. He is even working with molten metal while barefooted. Very hard worker.
@CloudXpat
4 жыл бұрын
This guy is awesome. He deserves a prize.
@tokul76
4 жыл бұрын
He deserves something for stitching his right foot which was damaged while he was messing with that aluminum.
@VadRov
3 жыл бұрын
Бесспорно, отлить ведомую шестерню гипоидной передачи во дворе собственного дома из алюминиевых отходов - это вершина кустарного мастерства. Однако возникает вопрос о применении сего изделия на практике.
@savade48
3 жыл бұрын
возможно используют в слабо нагруженных редукторах, насосы
@Oficcial_Kanik
3 жыл бұрын
Что то я сомневаюсь в этом сплаве слишком уж идеально алюминия там видать с гулькин хер а цинка прилично
@RussellModinno4ka
3 жыл бұрын
эта деталь используется для цыганского принтера
@user-le2bl3gs9y
3 жыл бұрын
Ставят в коробки на Вазе в ВЕСТУ.
@user-xq8di7rk5q
3 жыл бұрын
Он просто продемонстрировал что он умеет делать. А данная шестерня это как демонстрация сложности изделия
@shakilnasir3829
3 жыл бұрын
What a technique he has used , it’s very appreciable. Definitely, he is very skilled.
@WowThings
3 жыл бұрын
Absolutely
@user-tz2xk4cz5z
4 жыл бұрын
This Man has skills that surpass 99% of you here. Good Job.
@mattjohnson9743
4 жыл бұрын
I doubt that I work in a machine shop at nuclear power generating facility
@user-tz2xk4cz5z
4 жыл бұрын
@@mattjohnson9743 Where's that, Chernobyl or Three Mile Island?
@ankitaaarya
4 жыл бұрын
@@mattjohnson9743 he didn't included you then.
@user-tz2xk4cz5z
4 жыл бұрын
@falchulk You fail to impress me or anyone else, ...Loser. 😑
@asmongoldsmouth9839
4 жыл бұрын
As a mechanic engineer I spend a LOT of time fabricating my own parts. There are 100's of methods. Each unique. I am not gifted. I am trained and educated in it. There are tons of people like me globally. Also, shooting an approximation out there like 99% of humans using KZitem are out-skilled by someone who casts aluminum parts using sand and a set of mould trays is a true indication of near mental-retardation. It shows no education, no intelligence and no class. This guy is skilled. I don't doubt that. But anyone who gets trained at something and does it religiously ends up being great at it. That is basic, elementary science. There is nothing to be surprised by in this video. Again, basic science. I give this guy a thumbs up, but I would NEVER be ignorant enough to assume an entire demographic has an IQ of 70 or less just because "I" am impressed by something. That also means you are smug and think too highly of yourself and assume everyone else is less intelligent than you. Arrogance.... How drole.... 😒 How lowbrow. You are impressed by a guy who casts aluminum parts in sand? Cool 👍 I'm impressed by quantum physics. Different strokes for different folks. Don't doubt the intelligence of a society. That only indicates how uneducated you really are.
@gallorico4688
4 жыл бұрын
Regardless of he's condicion .... He's trying to do the best , a lot people making complaints when they have everything....
@michaelschuler7397
4 жыл бұрын
Sometimes your best is not good enough
@Varghese-pe7ib
4 жыл бұрын
@John Hernandez tamilcinems
@buzifalus
4 жыл бұрын
Eternal shutuppery is not cool!
@nintendoblood4835
4 жыл бұрын
What does that even mean? We have everything? This guy is in a better "condition" than most of us
@twinstersmadzz621
4 жыл бұрын
@@nintendoblood4835 ... 6
@kentuckytrapper780
3 жыл бұрын
This man knows what he's doing, excellent job.
@WowThings
3 жыл бұрын
Glad you enjoyed it!
@lhie1
3 жыл бұрын
this dude is insane, amazing skill
@benbuza8587
3 жыл бұрын
Too bad people like this are not appreciated in their countries. They trully are a national treasure. My heart goes to his family. God bless him. Total respect for this man.
@jacquespoirier9071
4 жыл бұрын
impressive skill, I'm speechless
@whitephosphorus3274
4 жыл бұрын
Yeah, this man is skillful.I don't really care it's aluminium but his technique and the resulting quality cast with such simple tools...he knows his craft. I've seen plenty metal casting videos on youtube, this is one of the best "no pro tools used". actually learned something and a little curious about the white stuff he uses.
@nun3sfc
2 жыл бұрын
Espetáculo meu irmão. Sensacional.
@wildriftgp5113
3 жыл бұрын
His customer always comeback in the morning handing him the aluminum gear for another recasting.
@dziupla2000
3 жыл бұрын
😆😆😆
@da6xsi06
4 жыл бұрын
This is me in the future making parts for my 90s honda
@asifalitalpur5011
4 жыл бұрын
nop u can find parts easily in asia they still use 90s stuff. countries like pakistan and india.
@DEEPAKKUMAR1992
4 жыл бұрын
@@asifalitalpur5011 not so much in India as it's hard to find parts for the model of even early 2000s.
@MrGreen_
4 жыл бұрын
I Don’t know what amazes me more the fact that he has this skill and the fact he does most of his work in that position .. with no shoes on etc 👍👍 But what a man.😎
@lucianobertini7260
4 жыл бұрын
Pouring melted aluminun and holding with the bare foot!
@noormalik9761
Жыл бұрын
big salute to this man!
@user-sd6ip6yy8l
3 жыл бұрын
Как я люблю этот канал с ихними нанотехнологиями.
@Tyler.i.81
4 жыл бұрын
I like this man he looks friendly and hard working
@hafezdjailani5262
4 жыл бұрын
all I see is a " FATHER " fighting for his family ...,look in his eyes, just wow.. 😇🤗 I pray for him,,and i love my father 🤗😇.. jazakallah
@alkuhseltsur9243
4 жыл бұрын
Your father is really fortunate to have someone like you has his (adult) child. I live in the New York area and yes, that is what I see too, and think of how many things I think of as annoying that this man would love to have the luxury of being annoyed by. His family is lucky too.
@user-gs2hg8km1y
4 жыл бұрын
You're right, we have so easy compared to so many.
@bobfletcher8196
4 жыл бұрын
Hafez Djailani Yes you are right, a man making things out of necessity working hard for his family. More power to him.
@tomadams3528
4 жыл бұрын
Let's send him some tools. He's using his hands and his feet and shit. This ain't year 1776.
@kevinatspeed
4 жыл бұрын
prayer doesn't do anything. God doesn't answer prayers. Is that not obvious? Alot of people have been praying for a long damn time and nothing has changed. So keep your thoughts and prayers to yourself...they are doing nothing.
@gregoryemmanuel9168
2 жыл бұрын
Now THIS is a craftsman - respect!
@scottpauljewelry516
2 жыл бұрын
The casting came out phenomenal 😵
@beakerunrefined4230
4 жыл бұрын
Skilled worker, pretty sure he is just showing off. Anyone that good at casting knows the strength of such things.
@ankitaaarya
4 жыл бұрын
Yeah that makes sense... But people here are smartasses
@kevintucker3354
4 жыл бұрын
Yeah I’m sure he knows that it won’t hold up in a cars differential. But his casting skills are awesome
@user-submitted
4 жыл бұрын
Ай какая умница , на коленках без нечего делать такие вещи, что можно сказать? Хвала этому челу , без дела не сидит....
@radzhaplatypov3781
4 жыл бұрын
Да молодец, но для чего это изделие, для чего потрачено время его и наше.
@andr9195
4 жыл бұрын
@@radzhaplatypov3781 ЭТО ПИЗ...... ПИЗ....ЦОВЫЙ. Штука называется ведомой шестернёй диференциала переднего или заднего моста авто
@soulxtr
4 жыл бұрын
@@radzhaplatypov3781 11 минут на такое сложное изделие - превосходный результат. Время потрачено на демонстрацию возможностей.
@TopG9829
3 жыл бұрын
Wow this is amazing 😲 This guy is smart I like watching him doing that’s 🙂👍🏻
@AntonioFrancisco-gg4lw
3 жыл бұрын
Parabéns pelo seu brilhante trabalho irmão!!!🙏🙏🙏
@JR-bj3uf
3 жыл бұрын
I like how he has ordered his workspace so that everything is close to hand. He takes care of his tools and keeps his workspace clear of clutter. I also like how his tools do double duty. The hammer handle is as important as the hammer head. The big bowl is a cover for the kiln, a work pedestal or a bowl, what ever is needed.
@tommypetraglia4688
3 жыл бұрын
After the cast he made sure to keep the sand pile clean and put any bits back in the forge... nothing is wasted
@ivores
4 жыл бұрын
Will, brains and some wornout improvised hand tools. Immagine him in a proper workshop. Hat down and respect is all he deserves.
@JT_8283
4 жыл бұрын
Get this guy to America get him a job at a car manufacturer change this man's life
@jameslubin5100
4 жыл бұрын
@cv 67 isn't THAT the friggin truth....whinin about how they want EVERYTHING FOR FREE...CUZ. God forbid they would have to work for anything!!
@aamirnawaz9633
3 жыл бұрын
Really hardworking man....appreciate
@mashadulislam5586
3 жыл бұрын
Lots of hard work. Respect for him.
@user-ew6tf6rz4h
4 жыл бұрын
Официальный поставщик шестерней для АВТОВАЗа
@user-yl3ic9vm4x
4 жыл бұрын
А для УАЗА его сосед делает!
@zaliziak7395
4 жыл бұрын
В Китае та же херня.
@user-nr6sh4os2o
4 жыл бұрын
аХ-ХАХАХАХАААА!! ногами делает.
@user-yi1fb2ug6i
4 жыл бұрын
Каждый хочет жить , кто на что горазд
@user-hc6df5vi8m
4 жыл бұрын
Ну заебень сам это в России.
@robertdeniro4523
4 жыл бұрын
Congrats for this man. Life is not easy for some people. They have a family, too. They were young and had dreams as well. And I’m believe these people are real legand.
@Sophiaeriksson
4 жыл бұрын
robert deniro you are right bro
@randythompson1957
4 жыл бұрын
Sounds like something Robert DeNiro would say. You better hope you never buy a car with aluminum running gears .
@markcorres969
4 жыл бұрын
Robert dinero this fella is ripping off people and putting their lives at risk.
@gulistarani387
4 жыл бұрын
Ffbityvbgru
@SergioooFerretti
3 жыл бұрын
Respect for the man !👍
@prateekshyapanda8435
2 жыл бұрын
Beautiful.....I appreciate this
@alanlilley7781
4 жыл бұрын
90% of the comments assume that the gear is to be a replacement for the steel original ... read the introduction "[he] is going to metal cast a vehicle gear which I provided him to check if he can aluminum cast it or not" ... this guy is naturally talented and light years ahead of most of the people commenting! I hope that he gets an opportunity to use his natural talents in a better work environment as a result of this video ...
@thomascies-ki742
4 жыл бұрын
Folks , we are doing it for several centuries , today in modern factories lot of parts are still sand casted , using a bit more mechanized procedures, though . But here, as usual the "general" YT public does not have a clue what they are watching ......just bitching , dont ask them to read and never read these stupid comments!
@xXxJSHxXx
4 жыл бұрын
@Oftin Wong LOL it was a test of his skill in aluminium casting... If u think its easy u need a shill pill. Its a test not that hard to understand.
@minkorrh
4 жыл бұрын
@@xXxJSHxXx It _is_ easy. We made all manner of things in metal shop. Grade 9. OIlsand, aluminum, heat. mold.
@clarin3318
Жыл бұрын
Great work sir. Hats off to you!
@ergonseeds3292
Жыл бұрын
سلام ہے اس محنت کش جوان کو ۔❤️❤️
@Prairiedrifter1
4 жыл бұрын
It’s interesting to see how he does all of his work on the ground. No work bench needed. I like the concept of utilizing space more efficiently but my legs would go numb if I tried this
@user-me3rd8pu8m
4 жыл бұрын
Умница 🤗👍💥 Я восхищаюсь такими людьми! Не ноют, не жалуются.. Просто тихо занимаются своим делом и всё...🇷🇺
@user-vr5xn2nn5w
4 жыл бұрын
Да, действительно голь на выдумки хитра. До этого посмотрел ролики Pakistan truk. Там тоже умельцы чудеса творят
@crazyspb
4 жыл бұрын
Ну это забавно конечно, но толку только от этого ноль. Это даже не продать)
@lexafarebolsmit7120
3 жыл бұрын
Для меня это видео показывает, что бывает с целыми странами, для которых наука Ахилесова пята.
@lexafarebolsmit7120
3 жыл бұрын
Чему тут восхищаться? Ручном труду? Все развитые страны стараются уйти от него, а мы восхищаемся.
@user-rw5wx4ze9j
3 жыл бұрын
он же и обувь из картона делает. которая на садоводе продаётся
@brianwalker6849
3 жыл бұрын
I could watch this man and his craft all day long incredible??.
@johnboykin3128
2 жыл бұрын
That was impressive entertaining interesting and educational.
@glowingdawn9179
4 жыл бұрын
This is what hard work and real skill looks like
@borrabobos
4 жыл бұрын
I want you for the new space X proyect
@aleksandersuur9475
4 жыл бұрын
Eh, while I'm sure the work is hard I'm not seeing much skill here. Not surprising though, some dude with a camera asks you to cast a pointless part nobody will ever use for anything, many people would half-arse it. You want to see how a skilled caster works check out Olfoundryman kzitem.info/rock/90RoN_IjSRF18jAG0HIA6gvideos
@FILTHY-YOGURT
4 жыл бұрын
@Scrotus Maximus the camera man asked him to make the gear to show the detail of the cast , think of it like an advert for a new cnc machine,they make all kinds of useless crap but looks cool 👍
@asadmalik8835
4 жыл бұрын
@Scrotus Maximus can you even manage a sandmold casting?That guy has skills provude he has proper and more tools at his disposal.
@opindras.bangerh129
4 жыл бұрын
Hard to believe people actually gave this a thumbs down. What did they expect and what more could he have done to earn their respect...?
@amadine770
4 жыл бұрын
For those mocking his skills-it was not a part to be used in a car considering the power demand-he was just showing what he can do.He has learnt the art of preparing green sand for casting of which many do not how to do it.My fear evaporated when the cast part came out okay-my respects to his art.One thing people should know for a fact -a company like Ferrari still cast their potent V12 engines and that is why they are expensive because every one them that turns out imperfect must be sent to the smelter once more to be redone.
@ZacLowing
4 жыл бұрын
He's making a part out of a weaker material by far inferior materials than the original.This gear will strip within a month, stranding someones grandmother and children to be eaten by crocodiles.
@amadine770
4 жыл бұрын
It is true that he is using a weaker metal than the original but the point is that he is trying to show what he can do-for sure that part cannot be used in real life applications unless it is an alloy of aluminum.Another thing to smelt steel will require a better furnace with the right output to do the job-the furnace he is using is good enough for aluminum smelting @@ZacLowing
@jjcuna
4 жыл бұрын
@@ZacLowing It was a demonstration.
@ahmedbusati209
4 жыл бұрын
I do respect this man ...he works so hard to realize his innovative ideas regardless the tools & equips. he uses, and the uniform he is wearing. he really looks poor working in bare feet ..exposing himself to hazardous conditions of work that could cause him serious injuries... May God helps him.
@ivanleterror9158
2 жыл бұрын
I relate to this having learned this in junior high school metal shop. LA City School System. Aluminum gears are not much good for anything, but making it for this demonstration gave it value.
@eighthof8
3 жыл бұрын
Totally awesome!
@locouk
4 жыл бұрын
When you order your Land Rover Differential Crown Gear from eBay..
@colinnorthcott9219
4 жыл бұрын
Britpart?
@Terrifier1984
4 жыл бұрын
No all jeeps models u trying to say
@Terrifier1984
4 жыл бұрын
Except for the ones you empty you pocket to make stronger yes i agree , but is basically a fact factory crap wont last not even on the highway im saying !!
@ciprianotattoo
4 жыл бұрын
Thats the original part actually.
@MussaKZN
4 жыл бұрын
OME Land Rover part! part No: “DS 110” DS stands for Dog shit
@IemonIime
4 жыл бұрын
This guys work ethic is astonishing. I wish some one would donate to him a small workshop and some shoes tho.
4 жыл бұрын
they wouldnt use it if u gave it to them
@lowlightevangelist9431
3 жыл бұрын
Excellent craftsmanship.
@bigdaddy7670
2 жыл бұрын
Excellent job my friend!
@tomvana4270
4 жыл бұрын
More impressed with how he could sit the way he did for as long as he did.
@83hjf
4 жыл бұрын
it's common in asia. Their knees actually stretch because of years of sitting like that. it's not unconmfortable for them, but I still wonder why they like to work in that position, as opposed to, you know, standing up, so you can walk and grab the tools you need.
@Nine7Media
4 жыл бұрын
thats just fuckin sad. do some stretches. jesus christ
@dexter1993
4 жыл бұрын
@@83hjf thats middle earth, not asia
@83hjf
4 жыл бұрын
@@dexter1993 I don't remember anyone in the movies sitting like that
@ceeweedsl
4 жыл бұрын
Us Westerners ruined with chairs think we have progressed. Muscles gone, modern people can't even squat like humans have for all of history.
@roguesqadronairsoft
4 жыл бұрын
I'm more impressed with his squatting skills than anything else
@Mikemike-gr6xt
4 жыл бұрын
Live in Asia..most people can squat-sit like that.. Because most people using squat like toilet.. 😂😂😂😜 we've been trained since kids..
@dillpickles5317
4 жыл бұрын
I'm more impressed with the picture quality
@andrewvitale2700
4 жыл бұрын
He'd be a good catcher .
@arnavrevankar444
4 жыл бұрын
I'm impressed that he got it so perfect on the first go without sanding
@RianPrakoso91
4 жыл бұрын
Squat is easy, how's that impressive duh
@user-yh5cx9do1v
3 жыл бұрын
С таким развитием цивилизаций, через 500 лет это будут новые сверх технологии.
@user-ew2tk6fx5j
3 жыл бұрын
Что за бред? Это только для твоей страны применимо.
@user-yh5cx9do1v
3 жыл бұрын
@@user-ew2tk6fx5j я не знаю какая будет 3 мировая война но следующая за ней будет с камнями и палками ...
@locksmithmuggle
2 жыл бұрын
Sheared smooth in 1 RPM. Nice work!
@bethechangeme2233
4 жыл бұрын
He makes that same gear for his car every single morning..
@tibblescat2918
3 жыл бұрын
I cast metal all the time and yes aluminium would last you the afternoon, but I know cos I tried, many times, gears have to be machined not cast. they are too exact
@Balta454
3 жыл бұрын
And if molten metal drips onto his feet?
@YouthTubezation
3 жыл бұрын
@@Balta454 He casts a new one
@operator0
3 жыл бұрын
@@tibblescat2918 Well, besides the precision, it's also aluminum. Aluminum wouldn't last an hour in that application, I would think. While watching this, I kept asking myself; "Why is he casting it in aluminum?" I suppose the videographer wanted it that way for demonstration purposes after reading the description. Also, rough castings are sometimes used to help produce precision parts, but the casting is then machined to get the final part.
@thisisnotme4245
3 жыл бұрын
@@YouthTubezation he'll have to cast a new foot and gear every morning
@lordshango4184
4 жыл бұрын
As the wise saying goes, “Necessity is the mother of invention.”
@lawrencenoctor2703
10 ай бұрын
You make your work look so easy with your marvelous skills. Iv done casting myself and appreciate a master craftsman at work. God bless you and your family.
@goodbonezz1289
3 жыл бұрын
That was AWESOME
@jacoba8851
4 жыл бұрын
If this guy had opportunity,he would do so many other amazing things!
@Prander5x5
3 жыл бұрын
his real skill is putting up with those kids behind him all day long
@stonewallace379
3 жыл бұрын
That made me laugh... a lot
@Inlinetodie
3 жыл бұрын
Yah...they got louder the further I watched video.
@denislavdenovM
3 жыл бұрын
Pretty annoying yes...
@mike62mcmanus
3 жыл бұрын
That's the sound of music, the Congo was full of kids playing and no I-phone to poison them, poor but happy.
@ranjusranjus143
3 жыл бұрын
In none western cultures, the sound of children is a very welcome feature in everyday life
@OlegAleksandr
3 жыл бұрын
Умелые руки. Шестерёнка получилась, как настоящая, только из алюминия.
@eeepeeep5206
3 жыл бұрын
Totally amazing ! What skill to do this the hard way.
Пікірлер: 8 М.