Whoa... I jus saved the headache and money ordering pci skirts thanks again!
@Newbenwindowcleaningcom
4 жыл бұрын
Incredible Side Skirt , Beautiful yet affordable !! I have my self similiar with a touch of your lesson now i can install mine,
@user-ef8lg3xc4f
2 жыл бұрын
Can we get a two-year follow-up? Do ya still run them? If so, how have they been? Any design changes you'd make if doing it over again?
@FFAttack
2 жыл бұрын
So far so good, have about 10 track days on them. The only thing I would change for my car is rear spats to help deflect air off the rear tires.
@agrayfa5307
4 жыл бұрын
Love the content man. Would definitely be interested in seeing your front fender setup as well. My apologies if you already covered it, I just found your channel the other day and haven't seen all the videos.
@FFAttack
4 жыл бұрын
Thanks Alex! Glad you found the channel. I will be covering the front fenders and what was required to fit the 17x10’s with 255’s soon.
@agrayfa5307
4 жыл бұрын
@@FFAttack excellent, exactly what I was hoping to see! Cheers
@nerdsports
6 ай бұрын
@@FFAttack whens this video happening? 😅 I have a CRX but still curious.
@FFAttack
6 ай бұрын
Hahah yep, that’s long overdue. To be honest it’s an ongoing thing to make the wheels tires fit lol.
@alexmacias6007
4 жыл бұрын
Nice work
@whogotasprite587
3 жыл бұрын
I’ve always wanted to make these pci sides
@johnnycashh7148
2 жыл бұрын
Shoulda put some hair around it...🤣🤣 Looks way better than the home depot plastic gutters on the side!! 👊🏼🍺🍺
@DailyRolla
4 жыл бұрын
Nice came out good 👌🏻👌🏻
@Rxb_k24na
4 жыл бұрын
Great work!
@joshuac581
7 ай бұрын
Thank you sir
@connorrichards9744
3 жыл бұрын
How tall are the side skirts and how big is the lip?
@FFAttack
3 жыл бұрын
It’s 5” tall and the lip is 1”
@bseries8826
3 жыл бұрын
Super nice
@RevHighDriveHappy
4 жыл бұрын
Those look a lot stronger then the track works aero ones I have
@FFAttack
4 жыл бұрын
Rev High Drive Happy They turned out surprisingly sturdy. Thanks for the comment!
@RevHighDriveHappy
4 жыл бұрын
FFAttack no problem I’m enjoying the build
@draxlerm9633
4 жыл бұрын
what are the dimensions of those brackets?
@danino66
3 жыл бұрын
How tall are they?? 5”?
@FFAttack
3 жыл бұрын
David Rolland yeah 5”
@clintvessey4744
3 жыл бұрын
Where did you get the aluminum?
@FFAttack
3 жыл бұрын
In my area we have a metal mart and Metal Supermarket they stock it. They will even bend it for to your specs for a small Fee.
@clintvessey4744
3 жыл бұрын
@@FFAttack bet I appreciate it
@JORGO92PTB
2 жыл бұрын
Dimensions of brackets?
@FFAttack
2 жыл бұрын
If I remember correctly they are 1”x1” angle and about 4” long.
@jmurk138
3 жыл бұрын
This is siick man
@supracivic100
2 жыл бұрын
What did you used ?
@FFAttack
2 жыл бұрын
It’s aluminum.
@supracivic100
2 жыл бұрын
@@FFAttack did you got it from Home Depot or Lowe’s or rona ?
@FFAttack
2 жыл бұрын
No, a local metal supply shop.
@supracivic100
2 жыл бұрын
@@FFAttack where Langley, surrey ,mission Abbotsford?
@FFAttack
2 жыл бұрын
Sorry did not know you are local. Port Kells MetalMart. They have the ability to do the bending as well on site.
@stinky15552
3 жыл бұрын
Just found your channel awesome DIY I like these and was wondering If you had a list of all the parts like length width of metal, metal thickness, and the brackets what material and measurements you had to use? I have to check your channel out got some awesome content. I'm on Instagram ekracer98
@FFAttack
3 жыл бұрын
The material I had bent was 1/16th and it’s 5” tall the lip is 1” and they are 75” long. The mount tabs are just some 1” aluminum angle I had that I cut down and drilled.
@323pwr
2 жыл бұрын
@@FFAttack where you bought that sheet of metal ?
@FFAttack
2 жыл бұрын
It was leftovers from a friends sheet metal shop. Should be easy to get at any metal supply shop like MetalMart or something along those lines.
Пікірлер: 40