I love this build! I have a boat almost exactly like this that I haven’t touched yet. I’ve been waiting for something more practical to build, and here it is! Thanks Mike!
@TinyBoatNation
2 жыл бұрын
Get to it!
@FinkeFishing
2 ай бұрын
Can you do a video discussing how to plan your build so it balances properly and isn't too front or rear heavy
@carypipes
Жыл бұрын
im glad i found the channel,ive been doing the ame thing in mo. for past 10 yrs
@jeremiahcarpenter9947
2 жыл бұрын
Mike! Stepping up the video production game! Nice! I love it!
@randystevenson1264
Жыл бұрын
Really like build form mild to wild great work really like to c tiny boat setup for saltwater inshore fishing
@ericeichenberger3865
2 жыл бұрын
I live in northwest Michigan and this little boat is a monster would work awesome on the thousands of small lakes and would work well on the motor sections of our rivers in fall for Salmon..
@brongzilla8334
2 жыл бұрын
I really like watching! This is awesome I really want a boat for myself but got to save money to do that
@aaronjt74
Жыл бұрын
I actually have this exact same boat. Thanks for your awesome videos so now I have great ideas of how to make this a truly functional boat
@scotts6723
6 ай бұрын
Great work, love the detail builds
@AdamRyanA
2 жыл бұрын
This gives me a itch to build something! Looking good!
@TinyBoatNation
2 жыл бұрын
Do it!
@tbnationoutdoors-nateeckhold
2 жыл бұрын
About time
@Buildthat1989
Жыл бұрын
Try oven cleaner then wrap Saran Wrap on top of it for a few hours to keep the oven cleaner from drying as quick. Also full strength oven cleaner thank me later
@gremlin3362
Жыл бұрын
A large washer or something round with a hole in the center for the marker along those curves will give you a carbon copy of the shape.
@mattbrown5511
2 жыл бұрын
That is going to be one gorgeous little boat. I hope to be able to build, or buy, a similar boat one day. Dreams are what keep us going. God bless and greatest success.
@4ryanthomas
Жыл бұрын
I’d love it!!! Rad Mike!! Thank you for the videos
@umpatas5468
Жыл бұрын
I'm trying to put a bow plate that can handle both the troling motor and anchor winch and then a small casting deck forward with a chair on a pole. All this while keeping the weight evenly distributed so I can hit plane fast. And i want to keep overall center of gravity low. I operate my little 14' starcraft on rivers and lake Erie so that's important. I think you've pointed me in the right direction. Foam is absolutely not an option.
@davehaag8175
2 жыл бұрын
Epic my friend … love your videos!!!
@CarlosCosta-ih7ot
Жыл бұрын
thank you for your video it cleared a lot of doubts.
@allenwalters8812
2 жыл бұрын
Find the right size washer, put it flat on the deck against the side you are tracing, put your marker in the in the center hole of the washer and roll it against the side. Makes a perfect copy of the side.
@TinyBoatNation
2 жыл бұрын
Genious
@allenwalters8812
2 жыл бұрын
@@TinyBoatNation not my idea. I came across it in a car audio video.
@Cavanpikefishing
2 жыл бұрын
Great Job lads 🙂I will look forward to seeing the rest being done great work🙂👍🇨🇮
@chriswilson8911
2 жыл бұрын
Check into divynicell Its a laminated corrugated foam that is light weight bendable and readily accepts marine resin. Used for flats boat decking
@deanwatt
2 жыл бұрын
If you line up all the visible screws so the X pattern in head are all straight up and down, it looks much nicer. Easy thing to do to make the final finish more pro and less DIY. It's free to do and is so satisfying! 😂
@TinyBoatNation
Жыл бұрын
OCD is not your friend.
@deanwatt
Жыл бұрын
@@TinyBoatNation Looks less messy!
@michaelgonzalez8863
2 жыл бұрын
Looks nice ! For me I’m sure I will never use wood again on any Jon boat builds. I buy my aluminum from a metal recycle place damaged sheets
@TinyBoatNation
2 жыл бұрын
Right on
@Nhq60
3 ай бұрын
Good work
@TinyBoatNation
3 ай бұрын
Thanks
@kenmccarthyfishing
2 жыл бұрын
Awesome video Mike 🔥🔥
@TinyBoatNation
2 жыл бұрын
Appreciate it!!
@brianfoster3189
Жыл бұрын
Hey TBN, I’ve watched several of your videos and learned a ton. I’ve got a Tracker 190 and I want to redo the front deck. It has two compartments behind the front fishing seat, and I want to turn that into one center rod locker with the 90 degree bend in the lid aft. Not sure if this is the place to ask, however thanks for your time!
@TinyBoatNation
Жыл бұрын
No prob! Just emailed us support@tbnation.net or call us at one of the numbers listed in the description of this video and we can get you started!
@jamescopeland8037
Жыл бұрын
I've got a boat that is just like the one you are building except its not built yet
@justinharvey6192
6 ай бұрын
Adding foam doesn't add to the boats floatation only if the boat takes on water
@dustinhamilton7886
Жыл бұрын
Don't know if anybody has mentioned this. But plywood is lighter than aluminum sheeting in some cases. Check it out.
@TinyBoatNation
Жыл бұрын
We talk about it later in the series
@jjdracing510
6 ай бұрын
I have an older glass bass boat I want to completely re-do similarly for electric only lakes. I am trying to figure how to build the foundation to attach the frame kit and build from there...
@mainetroutwhisperer
2 ай бұрын
What did youse for paint on the black vertical pieces after the epoxy?
@mmerc9838
2 ай бұрын
A saying I have heard about professional wood workers, they are good at making jigs. A simple straight edge setup would give perfectly straight lines when routing out the recess for the lids.
@jamescopeland8037
Жыл бұрын
Wish it was mine
@rossandgaylemiller8241
6 ай бұрын
is there any ca boat shop will do a aluminum coversion on a 14 ft valco boat from the ground up?
@robertaltomari2260
Жыл бұрын
Mike, what is the program you used to make the graphics in the beginning. I’ve been looking for one.
@TTTray13467
Жыл бұрын
Idk where you get your aluminum from but that aluminum should be Like 100-200 a sheet
@matthewnychyporuk5399
2 жыл бұрын
I don’t see the link
@r5loco69
Жыл бұрын
Whoooa Mike I need this build for my boat. I think I have the same one. How can I hire you to do mine. Let's chat
@TinyBoatNation
Жыл бұрын
Contact our shop in IL. Contact information is in the description of this video.
@sstatic6093
Жыл бұрын
Question what size angle aluminum and what type plywood and size?
@joecruz5732
Жыл бұрын
What type of container did you use in the dry hatches? Or were they framed out and walled off with the cosmetic wood?
@TinyBoatNation
Жыл бұрын
I used a tough tote
@matthewnychyporuk5399
2 жыл бұрын
How do o enter
@potatojz38
2 жыл бұрын
What's the plan for the space in the front of the bow? Is it just staying hollow without foam?
@TinyBoatNation
2 жыл бұрын
Yes.
@iBaloo42
Жыл бұрын
The only buoyancy the foam needs to support in case of sinking is (the weight of) the negative buoyancy, which is broadly everything made of metal (including the outboard motor) and batteries. You can exclude the weight of water from livewell, gas, anything made of wood, and the weight of people with their own flotation devices. The 1,000 lb of displacing buoyancy you installed as foam on this boat makes the boat far unsinkable.
@TinyBoatNation
Жыл бұрын
Thank you for breaking it down. I believe very much so that this, but would be terribly hard to sink
@jchrismagee
Жыл бұрын
@@TinyBoatNation Does adding the foam increase the weight capacity or does it only add protection from sinking due to capsizing/other damage?
@isaaccarey4764
Жыл бұрын
In watching it seems like the hose for water draining got sealed inside the expanding foam, is this true or is the hose still above the foam? If the hose is inside the foam how does it drain as I thought closed Cell foam does not allow water to flow through it?
@TinyBoatNation
Жыл бұрын
It was there for a different type of mud, but we ended up filling the entire thing with foam. We sealed the deck off so that water can’t get in there. It’s in another video within the series.
@gregwalsh9400
Жыл бұрын
Quick question I Want to put my Front seat over the battery box like you did. How can I Get a Hatch with the hole in it for the swivel chair?
@TinyBoatNation
Жыл бұрын
Just use a hole saw and reinforce the underside. Most people drop them in that way
@Nhq60
3 ай бұрын
🎉
@jamescopeland8037
Жыл бұрын
How do you enter the giveaway
@Bigbenfishing
8 ай бұрын
Do you use screws or 1/16 rivets to anchor the wood
@TinyBoatNation
8 ай бұрын
1 1/2 inch rivets
@colin-me
Жыл бұрын
Question: With marine grade ply would you need to do a filler coat before putting down turf or can you just apply the turf straight to marine plywood
@tobydykes8781
Жыл бұрын
why do you not use any King Start board? is it too costly??
@TinyBoatNation
Жыл бұрын
Too heavy
@mini696
Жыл бұрын
10:20 the way you attempted to scribe that edge is pathetic.
@phillipbrown4580
4 ай бұрын
Are you using self tap screws for the wood to aluminum connection?
@TinyBoatNation
4 ай бұрын
I used rivets, but you can use self tappers. You just have to use a lot.
@phillipbrown4580
4 ай бұрын
@@TinyBoatNation i appreciate it! Just framed sub floor about to start building up! Only in aluminum wasn’t so expensive 😂
@krisfugitt1647
8 ай бұрын
Where in Illinois can you buy those hatches
@TinyBoatNation
8 ай бұрын
Yes, either directly on tbnation.net or we have a shop in Pekin. The address is in the description of the video.
@ScorpiusFishing
2 жыл бұрын
What software are you using for the virtual layout? Been trying to find something so I can show better details in my layers.
@TinyBoatNation
2 жыл бұрын
Photoshop
@FranksDIY
Жыл бұрын
What do you think of using pvc sheets instead of wood
@TinyBoatNation
Жыл бұрын
Not a good idea. I think it’s actually worse
@FranksDIY
Жыл бұрын
@@TinyBoatNation why is that
@wadedalekeller4258
2 жыл бұрын
What rivets are you using to attach the top framing aluminum angle to the hull ?
@TinyBoatNation
2 жыл бұрын
Countersink rivets from our website
@j.swipes
6 ай бұрын
Can you link the next episode?
@TinyBoatNation
6 ай бұрын
It’s part of a playlist. The link should be in the end of the video.
@jayward7536
2 жыл бұрын
how do you enter the giveaway I'm down here in ft myers and we got hit very hard from hurricane ian all my stuff is damaged boat ect all my tools destroyed trying to get a new setup.
@TinyBoatNation
2 жыл бұрын
It’s in the description of this video
@nohackle
Жыл бұрын
What kind of resin do you use to coat the wood?
@TinyBoatNation
Жыл бұрын
Two-part Marine Apoxy
@mb90905
5 ай бұрын
What are the hoses for in the sub frame?
@TinyBoatNation
5 ай бұрын
For drainage
@fish2much12
2 жыл бұрын
How do I enter to win the pontoon bass boat? I didn't see a link to use in the description.
@TinyBoatNation
2 жыл бұрын
I fixed the description and put the link in it.
@fish2much12
2 жыл бұрын
@@TinyBoatNation I got entered! Thanks man I appreciate it.
@krzysztof5571
2 жыл бұрын
Where I can buy this black locker flap?
@TinyBoatNation
2 жыл бұрын
What part of the video?
@44poly444
2 жыл бұрын
How long is that boat?
@TinyBoatNation
2 жыл бұрын
13.5ft
@DNYS8N
Жыл бұрын
Engineering and welding degrees not included.
@TinyBoatNation
Жыл бұрын
It’s not that complicated
@DNYS8N
Жыл бұрын
@@TinyBoatNation ok I guess what I’m trying to find isn’t simple but just quick as in an hour or two
Пікірлер: 105