My obsession of finish carpentry started like a year ago when I watched your wainscot episodes. From never cutting anything in my life, I have now done a study room with built ins, wainscot, crown and all thanks to you. Appreciate it 🤙 keep the videos coming
@MyrddinDundragon
2 жыл бұрын
Q#😝
@r2_rho
2 жыл бұрын
I did my living room wainscot thanks to Richard!
@jelsner5077
Жыл бұрын
This is the best tutorial for the crosseted corner. Very clear instructions. (I always thought it was called a "dog eared" corner). Thanks!
@richardwathen7279
2 жыл бұрын
The stone that the builders refused has Now Become The Corner Stone,, Thank You Brother love your videos
@johnnycanadiana1897
2 жыл бұрын
I went from framing to finishing last year. I love it. Framing is all rush and heavy. Finishing is more rewarding and you have some creativity involved. I'm totally hooked on finishing now and perfecting what I do. Thanks for the videos
@pitsnipe5559
2 жыл бұрын
Nice. Adding that spacer on the top made the reveal in the crossetted top consistent. Love watching your videos, always wanted to be a trim carpenter.
@vapertainment5313
2 жыл бұрын
Small piece of advice I learned for that top profile, if you cut a 45 facing each way on a piece of scrap you can mark either top or bottom and take a measurement based on those lines or one line and the block on the other side and walk your cuts in. Hope it helps.
@aknorth1053
2 жыл бұрын
Just saw an actual historical example of this in a historical house on a fireplace mantel
@Will-co1vk
2 жыл бұрын
Love the content. Always an inspiration.
@timothymccarty4373
2 жыл бұрын
Looks good and not as complicated as I thought it would be to do
@anthonyfetter2904
2 жыл бұрын
I like it! Nice job. I've become a somewhat recent fan of Brent's from watching the Build Show stuff. Even though that style is not really something I'm personally drawn to, I love learning about everything Brent shares and I was pumped to see you do it. It might have even made me appreciate it more. Pretty neat to find out you were in with Brent and it's great to see you sharing it with your skills. I also really enjoyed the stave core door too! Beautiful...
@ryansubbert2712
2 жыл бұрын
It looks awesome man keep up the good work keep pressing forward
@tony0327
2 жыл бұрын
Great idea. Going up another level.
@oliver.79
2 жыл бұрын
The stone that the builders refused has become the cornerstone….great video!!
@chadfallon3378
2 жыл бұрын
Amen! Jesus Christ is that cornerstone!
@williamthompson763
2 жыл бұрын
“Jesus saith unto them, Did ye never read in the scriptures, The stone which the builders rejected, the same is become the head of the corner: this is the Lord’s doing, and it is marvellous in our eyes?” (Mat 21:42, KJV)
@skunkyaawax4546
2 жыл бұрын
Stopped the video at this moment to truly appreciate this verse
@thyslop1737
2 жыл бұрын
The stone of stumbling, the rock of offense.
@navarrodragon25
2 жыл бұрын
@@skunkyaawax4546 same
@96Grizzler
2 жыл бұрын
You definitely inspire alot if us with your craftsmanship!
@MikeZMonroe
2 жыл бұрын
- You’re sure elevating your detailing game. Learning the traditional early century finishing styles and installation methods will not only make your home remodel something special but might open doors on the business side. - Your garage / shop window is so nice. Having a direct view outside sure brightens the work place physically and mentally.
@tomroe2861
2 жыл бұрын
Totally love this
@yzdrummer
2 жыл бұрын
So fancy but understated, which makes it classy. Also, nice reference to the cornerstone quote in O.T. referencing Christ.
@thomasdesalle9183
Жыл бұрын
I first thought someone drew Willie's all over your facing but then I noticed it's your little clamps!
@stephendimarino5570
2 жыл бұрын
Looks great my dude! Love your Channel!
@jenna6256
2 жыл бұрын
Looks awesome ! You could use your garage as a walk-in show room for trim styles....lol
@tdmallet
2 жыл бұрын
Bro, I follow a few guys on KZitem, but you're the best. In every facet. Totally down to earth, take it slow, transparent. You make it feel like anyone could do this. Enjoy your content very much. I watch every one.
@phoenixpv
2 жыл бұрын
Don’t know if you were quoting Marley or Sublime, but I nod in approval to sneaking that in. Awesome work, I’ve never seen that done before!
@organize1979
2 жыл бұрын
That corner clamp!
@ColonelK0rn1
2 жыл бұрын
Nice reference to Matthew 21:42. Glad to know you're in the know Richard! BTW, we're packing up for a move, and I found another bottle of CA glue and accelerant that I ordered a while back, and was frustrated because I needed it a month ago while I was doing some home improvements, but I didn't want to order anything b/c we're moving. Now I have some to use for my next home! What was that screw down clamp that you used for the first 90 on the door casing? That looked like a nice tool to have as opposed to the spring clamps.
@whitevanman8703
2 жыл бұрын
The other option with the first door is set the door liner to the wall and only architrave (case) one side and top. The only problem then is stopping the door handle marking the wall.
@TheRealGOTdurrrred
2 жыл бұрын
Looks awesome!
@oscar01672
2 жыл бұрын
Hey Rich, how are you, excellent job on that door you made ,it looks great, listen I'm interested in the Windsor moldings how can I get a hold of those samples
@FinishCarpentryTV
2 жыл бұрын
They have a contact form on their website and I’m sure they’d be happy to get you a bag 😎
@robertduffy5805
2 жыл бұрын
love the look
@laszlodesimon4768
2 жыл бұрын
Your fit and finish always amazes me how perfectly you cut all the pieces! A true craftsman! Thanks for sharing.
@PabloEskimofo
2 жыл бұрын
Your eagerness to learn something new and try it is always inspiring! It’s always nice to see someone of your caliber trying new things and explaining your process, especially when it’s experimental and not by any plans. Sometimes it’s nerve wracking attempting something new with hopes of not failing, but it’s so rewarding when it works! Cheers, thanks for the videos as always!
@mplussant
2 жыл бұрын
…’preference thing’ ?…more like a ‘perfection thing’, eh?…
@klmbuilders5385
2 жыл бұрын
I love antique mouldings. I'm often asked to duplicate and replace a missing trim piece. I really enjoy the challenge!
@MikeDamours
2 жыл бұрын
ok , i have to know what kind of router table do you use? where can i get it ?, mine is so outdated, yours look fantastic!
@ronaldfloyd5504
2 жыл бұрын
I first noticed this at the White House. Never thought I would see a simplified demonstration of something I thought was complex. Thanks, great job.
@toobad9946
2 жыл бұрын
I too have used old photographs of the White House (especially renovation photos) for inspiration. When I was a child it was still possible to go on tours in seldom seen areas and look at the architectural details. My father owned a building supply company and I grew up with the trades. Even as a kid I was fascinated by good craftsmanship. My visit to the White House and DC (Smithson Castle) is still fresh in my mind.
@personalfavoriteshill7547
2 жыл бұрын
Nice work overall but one question. Why didn't you match the trim detail of your window by the miter saw? Or are you setting up your shop as a showplace to let someone see the various iterations of trim possible?
@allyg47
2 жыл бұрын
I personally think it's hideous but whatever floats your boat. You do amazing work even if I don't like that style. I really enjoy watching you branch out and try different things.
@darrentill9235
2 жыл бұрын
Great work. I'm in Australia, and you don't see anything like that hear . I really like this and I think I'll be doing this in my next house. Thanks
@ericacosta9071
2 жыл бұрын
Nice work! @4:19, what clamp is that, looks like a Kant Clamp?
@tecks1976
2 жыл бұрын
I was already a huge fan of your channel, but your cornerstone statement made me like you even more. Keep up the great work and God bless!
@navarrodragon25
2 жыл бұрын
Same
@1coolcontractor
2 жыл бұрын
The upside down door handle 🥴 I’m sure that will change with the new door. I see it all the time…
@johnhodge8252
2 жыл бұрын
Love it bro! Great work! I caught your Cornerstone reference…clever!
@darrenmarsh2290
2 жыл бұрын
Good call on the lines lining up. Dead ends are tacky. Squeaking a little scripture in?
@patrickcowan8701
2 жыл бұрын
Too fancy for my blood,in ten years we'll be tearing them out. I support the latest style. You are a craftsman.
@praetorianblade6490
2 жыл бұрын
lol, My 1870's era home has these trim details, so I will be keeping mine- never knew it had historical significance.
@stevegrimes5105
2 жыл бұрын
Getting fancy! That's a very traditional (Georgian) style, how much demand for that is there in your area? Talk to Brent Hull, I imagine that the add-on piece is some proportion of the moulding height like 1/18th. I think in traditional doors, the vertical and horizontal pieces are a butt joint (trabeated)
@yoealesho595
2 жыл бұрын
Thats why they say Old is Gold... great attention to detail... keep up the great work
@CesarGarcia-ep8tt
2 жыл бұрын
not too crazy about that look, but I'm glad you decided to line-up the miters that way your reveal is the same on that focal point, I was thinking to line-up with the top of the hinge imo,
@philtodd7463
2 жыл бұрын
Wow that has given me some motivation to do something to my 130 y/o home.. 👍
@leozmaxwelljilliumz3360
2 жыл бұрын
This one really got me. I love all the detailed trim like this. Super cool, unique, and I love how your workshop is your testing grounds for future projects. Keep it up!
@ricklewis950
2 жыл бұрын
What does that mean...."the stone that the builders have refused has become the head corner stone"....?
@joshuatullier5801
2 жыл бұрын
That is a quote from the book of Psalms. Chapter 118 verse 22. I am pretty sure it is a reference to Jesus Christ being the cornerstone and the builders are the Chief Priest.
@cfomusic73
2 жыл бұрын
Love your videos........I even appreciate the fact that even though your trimming out doors in your garage that no one but you would see.... You still take the time to glue everything together perfectly and not just nailing it in place........ You care about your work and that's what makes you great man. Thank you!
@donaldpyles2891
2 жыл бұрын
Incredible! The house we are building has 10" ceilings I will have plenty of room to play above those casings. Thanks for the inspiration.
@hmtrimworks7148
2 жыл бұрын
10’ ceilings… the perfect height for coffered ceilings… give it a try… you’ll love it
@bigsuey
Жыл бұрын
I'm guessing you are a little person?
@amariza21
2 жыл бұрын
Good video. But only thing i see missing in your shop is a table ☺
@donlarsen9807
2 жыл бұрын
I really like the way it turned out. A little advice here, if you take the measurement of the top casing and add twice the thickness of your trim overhang that is the length from point to point on the trim piece. For example if you are cutting a piece of 3.25" casing on a 45 it will be 3.25" longer on the outside point than the inside. This is a method that will make trimming with a profile go a lot faster. Maybe you knew this with all of the trimmed panels you have done. Keep up the great content on your channel. Stay safe healthy and happy 👍
@JT_70
2 жыл бұрын
Beautiful job and attention to detail as with all of your work. But, that look is not my cup of tea. I can easily see in in one of Brent’s historical or period renovations.
@beyblader291
2 жыл бұрын
Killer skills and a great attitude will take you far.
@Brad-jg9vh
2 жыл бұрын
Thank you for having Brent on your channel! He is of the exact same mindset as me. If you love trim and details there is no way you cannot love Brent. He is as real as it gets. I like how you are excited to try different more complicated things. Thats what being a craftsman is all about, taking on new challenges! Thanks again!
@johnscarpentrytv4358
2 жыл бұрын
OK, IM REALLY INSPIRED TO MAYBE DO MY HOUSE NOW BUT WHAT IS THE APPROX COST PER DOOR EACH SIDE ENCLUDED WITH MATERIAL YOU USED? LOL
@dereksellars
2 жыл бұрын
Nice job!! That is really Cool!! Thanks for sharing.
@JoePalumbo221
2 жыл бұрын
I've seen that style but never knew much about it. Thanks for the education!
@funnyharleyman
2 жыл бұрын
Do you purchase your molding at a big box store or an independent? I sometimes think it’s better to pay a little more and go with the independent dealers.
@ledivinrs
2 жыл бұрын
question, why didn't you use CA glue for all the trim in this video, that would have been what I would have done and I want to know if there is any reason or both would be good options.
@nathangardner772
2 жыл бұрын
How’s that makita doing now after a few months? I noticed today on mine, the gsl02, 8-1/2 blade, I was cutting some 5/4 oak stair treads,, with returns. 4.0 battery with a low mile blade cut 4 of them. Granted, that is asking a lot from a one battery saw. Meaning from full charge to almost dead after about 24 cuts, 11-1/2 deep treads.
@rickhissen1904
2 жыл бұрын
Like that trim detail I've been doing trim since 1984 and no one I've done trim for ever done that in going to suggest that to a couple of my builders who do spec homes also you might want to get you a push stick that will hold down your material Matt Jackson's got a good one
@markpalmer5311
2 жыл бұрын
You are really raising the bar! So cool you connected with Brent.
@robertbamford8266
2 жыл бұрын
Interesting solution to align the miters. With the extra spacer on top, the width of the flat surface across the top is the same as the that in the two kicked out sections on the sides. I think I prefer it! In any event, clever!
@joes5096
2 жыл бұрын
The 9:02 miter match misses the whole point of the phone example like comparing apples to oranges. The phone example massing reflects a uniform "T" width that reflects a traditional heavy header atop posts staying above door line - sense of strength. The trim molding wrap allows the eyes to trace - sense of elegance. My preference.
@deanmilken3633
2 жыл бұрын
So whats your method for doing the transition from the casing to your base and shoe? Does it stick out alot from the base or is it pretty even transition?
@andrewc6385
2 жыл бұрын
Nice man! Its a different header option rarely seen. Great job on the installation as usual!
@michaelmancini5773
2 жыл бұрын
I would rather use a nice wider casing, and rip down the the leg against the wall, than keep a common casing on the door, especially if I've used the nicer casing in other parts of the room, ie; windows, doors, but thats just me.
@patrickstone9229
2 жыл бұрын
The picture frame cutting jig on make something looks like it would be perfect for making those rabbited miters
@ericlockridge4897
2 жыл бұрын
So what do they show for using as far as floor trim? I'm sure most options look bland???
@rogergregory6512
2 жыл бұрын
I didn't see you cut the two small pieces, where they just 45's on each side?
@trackrat62
2 жыл бұрын
Not gunna lie - a few days ago I watched Brent Hull's video on this style and until just now I thought it was called "cross headed corner" 🙄
@dennismccormick7322
2 жыл бұрын
Quick question , I am thinking bout buying a cordless finish gun 15 & 18 gauge ..what is your recommendation ?
@nickkraft5932
2 жыл бұрын
My tiny brain just can't grasp how he did that lol looks friggin sick tho
@daverenken1371
2 жыл бұрын
That’s so awesome!! I love the look!! That fireplace line is amazing in which bottom of the top peace lines of with the top of the offset peace on the outside.
@ashharris1993
2 жыл бұрын
Hey rich ! What style of diamond back belt are you rocking ? Looks very light and compact
@reneneron2971
2 жыл бұрын
I love how much you love trim work. Beautiful; God is in the details.
@noahb.7838
2 жыл бұрын
That was awesome, something for sure you are one of a kind.
@isaiahii6982
2 жыл бұрын
Check those calories dude, the gut is starting to stick out there a bit. Great video, I like the finished result and look forward to see what you do above the door and how you tie everything together.
@mcarendt
2 жыл бұрын
I like your approach to nailing it off. Not so much the way you hold it and shoot it… that’s something else. But the nailing pattern and glue sequence are smart. Bravo, man. Thanks for sharing!
@RandomChannel24497
2 жыл бұрын
I really don't like the look of that at all but I love your enthusiasm for carpentry and spending all this time for a garage door. Keep it up
@jmario1783
2 жыл бұрын
I love the miter match . That would of drove me crazy. Looks good. You made it look easy .
@EvanarProductions
2 жыл бұрын
Always pushing boundaries and learning thanks to your videos. Ive been watching now for at least 2/3 years💪🏽💪🏽
@71organicmusic9
2 жыл бұрын
It's possible that lining up the miter joints could weaken the trim strength. With it being offset it weaves it together possibly better..
@JackStevenson5045
2 жыл бұрын
It’s so good to see how courous you are. It means you will always keep getting better and better.
@petemelendez710
2 жыл бұрын
It looks great good job and it’s funny I got the same book Lotta good material to learn. Thank you for the video.
@johnking4221
2 жыл бұрын
Glad to see that Brent and tou crossed paths. Keep at it!
@SeanFoushee
2 жыл бұрын
I admit that at first I didn't think I'd like that detail form the picture on your phone, but dang that end result looks amazing! It really makes the casing a focal point. Now you have me rethinking the craftsman style casing I planned for our house.
@emilechap8573
2 жыл бұрын
You always do good work .This is beautiful.Genius. Thanks for the videos
@donhozy
2 жыл бұрын
Thanks for this step by step demonstration of the process. It's truly a pleasure to vibe off your enthusiasm and energy for finish carpentry.
@charliedidio7421
2 жыл бұрын
What kind of filler do you use for the nail holes?
@hmtrimworks7148
2 жыл бұрын
@17:08 well said… I like your style 👍
@eileenheitman4351
2 жыл бұрын
Richard, your demonstration is appreciated. In 42 years as a carpenter/contractor I have not seen this architecture. I must be living under a rock. This detail is beautiful. I’ll present it as an option when an appropriate type of job arises. You make it look easy. Your skill and demos are great and your production skills are constantly improving. Thanks for taking time to share with us. Dave Heitman in Omaha dba Dave the Carpenter
@scottwhitinger3278
2 жыл бұрын
Love your videos and have learned so much from you. I am just a do it yourselfer but, can step my game up on my own house. Thanks for sharing what you do. Truly amazing craftsmanship.
@robwaz1547
2 жыл бұрын
🤔 I think I’ll give it a shot in my shop doorway, thanks Rich. can’t wait to see the plan for the doorway next to wall. Thank you
@mohammedaldujaili2890
2 жыл бұрын
Amazing carpentry skills!
@toobad9946
2 жыл бұрын
I'm glad to hear you using the word "proportion". I've been milling my own moldings for over a year to build Victorian entablatures and plinth blocks for my home. The biggest problem was establishing the proper proportions while limited to an 8' ceiling. Keep in mind that every photo in those magazines is taken in rooms with ceiling heights at a minimum of 10' if not 12', 14' or higher. Achieving that look can be very challenging. Sometimes the moldings look out of place in smaller rooms. When the doors are too close to a corner (as mentioned at the beginning) the casings just don't look right no matter what you do. Also, since every door casing needs to match you have to do this to every door. You are going to have a transition/space problem in rooms with crown moldings. Since most (probably all) crown moldings taper narrowly at the edge, I had to make a spacer out of 3/4" flat stock. I then routed an ogee finished edge and installed the crown molding on top of the spacer. It makes the crown look "thicker" and looks better adjacent to the backband effect. After doing all of this you will find a very narrow strip of just 2" or 3" of wall to paint. Coffered ceilings become a whole new set of problems. All because of a little thing called "proportion". I don't recommend this for rooms with less than 10' ceilings. BUT it can be done with 8' ceilings. It was just a lot of trial and error to get the scale right. The problem with opening a can of worms is that you have to finish the whole can!
@viewera8038
2 жыл бұрын
"...every door casing needs to match you have to do this to every door. " Door surrounds don't all have to match. Their is historical precedence for varying to give visual indicators of the importance of different rooms. Or are you specifying the casing (architrave) only but allowing for variance above the architrave?
@toobad9946
2 жыл бұрын
@@viewera8038 If you will notice the window details on the front and sides of the White House are different. Correspondingly, in very elaborate historical buildings there are frequently "themed rooms", which do have different details around the doors/windows intended to compliment the themes frequently displayed on fireplace surrounds. If you have a 200+ year old mansion in GOD bless you, go for it! However, if you have a McMansion and they don't match you'll have trouble explaining yourself. (Unless you can make each one more spectacular than the last. Good Luck with that!) If you have 8'/10' ceilings they better all damn well match!
@kemosabe8313
2 жыл бұрын
Looks cool as hell! I like your setup at home. Nice little shop space. 👌
@yousufkothawala270
2 жыл бұрын
This is the first time seeing this type of casting on a door. Keep up the great content
Пікірлер: 370