Great video. Just a couple pointers for anyone looking to instal this same exhaust. 1, you don’t need to remove any heat shields. There’s literally no point to it. 2, the metal band around the actual muffler has white protective tape on it. Remove the white tape and it will reveal a beautiful polished chrome band. And my last pointer. Remove the baffle from the muffler. Sounds 10X better, it’s super easy and it’s louder. Let’s face it, bikes are heard, not seen by drivers. All in all, great video!
@JonDotCom7
3 жыл бұрын
Many thanks! And good pointers!
@Tommy_2_putts
3 жыл бұрын
@@JonDotCom7 sure thing! Let me know how much better that clamp looks with the protective tape pulled off! lol
@smallputt
Жыл бұрын
loud pipes save lives
@johnleo5004
3 жыл бұрын
Thank you for this video ! Helped me alot my friend !
@JonDotCom7
3 жыл бұрын
Glad I could help!
@JP1970
3 жыл бұрын
Just found your channel--digging your vids. Liked and subbed!
@JonDotCom7
3 жыл бұрын
Many thanks brotha!
@louisgonzalez803
2 ай бұрын
Do you have the link for this exhaust? Thank you
@JonDotCom7
2 ай бұрын
@louisgonzalez803 I left a link in the description, but apparently it isn't available anymore ☹️
@jake_of_the_jungle9840
7 ай бұрын
Late comment but did you lose any top end power? Or lose or gain any power at all? I don’t care about gaining any power but I really don’t want to lose any power or top speed if I buy this exhaust. I just would like a louder exhaust so I’m more noticeable for cars
@JonDotCom7
7 ай бұрын
I noticed absolutely no change in performance, any better or worse.
@jake_of_the_jungle9840
7 ай бұрын
@@JonDotCom7 Perfect I’m going to order one today! Thank you!
@JonDotCom7
7 ай бұрын
@jake_of_the_jungle9840 no problem! Cheers!
@rickydeathtower
Жыл бұрын
Dang mine fits very poorly. Spun it around the block and realized how crooked it was on the header. Gonna reseat.
@grominwithrob1339
3 жыл бұрын
You don't need to take off any of the heat shields. The exhaust sound really good. There is a baffle in the buffle so you have a option to tune it the way you want. I did a intake first(easily you best mod), then exhaust and ECU. The ECU from DH motoring requires baffles out. A bit loud. Also, after doing the exhaust, you can rest your ECU. If you don't reset the ECU, your bike will be running a little off buy will recalibrate itself after about 20 miles.
@sixdsix5028
3 жыл бұрын
Solid production value, mate
@JonDotCom7
3 жыл бұрын
Big thanks! This was before the DJI ronin gimbal I recently purchased, and filmed solo, so not always in focus, so could've been better, but I appreciate it!
@nicholasmcdougald3737
3 жыл бұрын
How you managed put put the spring on😱😱
@JonDotCom7
3 жыл бұрын
Ah, the blessing of editing. Without it, you would've seen me struggle for 10+ minutes with like 4 different types of needle nose pliers lol
@Tommy_2_putts
3 жыл бұрын
Easiest way is to get a skinny flat head screw driver. Then use it as a bar to pull the spring over. Also, WEAR EYE PROTECTION! it’s not worth losing a eye when that spring comes flying off.
@keldonator
2 жыл бұрын
I wish I could find videos like this that show ground clearance. It appears that you lost ground clearance in the front but gained it in the rear.
@JonDotCom7
2 жыл бұрын
I haven't really noticed much loss but some improvement in the middle with the elimination of the cat.
@timothyvo3749
3 жыл бұрын
Thank you so much, after watching your vid I did the springs before mounting and it probably saved a lot of frustration!
@JonDotCom7
3 жыл бұрын
Glad it helped!
@coltmeyer4590
2 жыл бұрын
Stock Grom speed?? I'm 5'7 150lb
@JonDotCom7
2 жыл бұрын
Probably 55-60mph
@Nate-ur6rq
3 жыл бұрын
Your camera focuses super well
@JonDotCom7
3 жыл бұрын
In some spots yeah, other spots it's focusing on the wrong thing. Guess that's the downside of doing everything alone lol.
@Nate-ur6rq
3 жыл бұрын
@@JonDotCom7 whats done do the bike man? Anything?
@JonDotCom7
3 жыл бұрын
@@Nate-ur6rq nothing too major. Levers, mirrors, foot pegs, fender eliminator, led indicators, chain tensioners, seat, this exhaust, dual sport tires, and sticker bombed.
@Galian6686
4 жыл бұрын
"Whew, it's a little bit of a pain if you don't have the right tool!" Me: Vietnam style flashbacks to the snapring in the M4 exhaust
@JonDotCom7
4 жыл бұрын
Lol seriously, thanks to the power of editing, you didn't get to see me struggle for ten minutes lol
@woahtv6377
3 жыл бұрын
hey at high rpms those springs attached make a rattle its sthat normal? or is something else wrong/
@JonDotCom7
3 жыл бұрын
I personally have not experienced that. Might need new springs?
@cbates2410
2 жыл бұрын
Was there any vibration with the exhaust when it was on
@JonDotCom7
2 жыл бұрын
Not any more than usual
@daochen1895
2 жыл бұрын
I am RANSOTO seller of this product , do you want make business cooperation
@JonDotCom7
2 жыл бұрын
Such as?
@daochen1895
2 жыл бұрын
@@JonDotCom7 put our link in your article, is it ok?
@JonDotCom7
2 жыл бұрын
@@daochen1895 ✌
@itztubez5066
Жыл бұрын
Ngl i came just to see how u put the springs on and was disappointed to see a cut to them being on and "was a bit of a pain if u dont have the right tool" Yea i know it is thats why im trying to see how theyre put on
@JonDotCom7
Жыл бұрын
Lol damn sorry man!
@itztubez5066
Жыл бұрын
@@JonDotCom7 lol I wrote that out of pure frustration after fking with those springs after work and struggling. All good 😂 srry
@JonDotCom7
Жыл бұрын
@itztubez5066 lol all good, reason I didn't film it was because I figured it wouldn't be to ad-friendly if I did lol
@jerryrodriguez4550
2 жыл бұрын
Did you remove the baffle ?
@JonDotCom7
2 жыл бұрын
Personally I did not remove it, I didn't want this thing too loud, and it def is not.
Пікірлер: 49