thank you so much. big help especially with the foot pedal tips.
@lukasknaup3351
2 жыл бұрын
Thanks! I'll be using the looper now thanks to u!
@ricardobracho4190
3 жыл бұрын
This helped me a lot, thanks!
@mikaerik
3 жыл бұрын
Happy to be of help!
@SonicVision
3 жыл бұрын
If anyone is using Line 6 FBV you need to set the switches to 'Single'.
@mikak2747
3 жыл бұрын
Thanks for your input!
@reid1967
2 жыл бұрын
thats just what I came here looking for, thanks. And thanks Mika
@jazzcat1056
2 жыл бұрын
Thanks so much. So clear now.
@hgaubaul
3 жыл бұрын
Very helpful. Thanks.
@donaldclemmons5980
Ай бұрын
Hello I am having issues with Amplitube 5 and not being able to save the presets as a TXP file. It looks like it saves it as a AT5 file only. I am using Windows 10 .
@mikaerik
Ай бұрын
Hi, I don't think you can save it in Amplitube any other way than .at5proj
@mikaerik
3 жыл бұрын
Here's a more detailed video on what gear you need and how to set it up kzitem.info/news/bejne/s6edzKF6cH19gH4
@ShwigShwag
3 жыл бұрын
What foot switch and expression pedal are you using with your axe i/o. Information on this around the net seems scarce. I was thinking about ordering a boss fs-7 and a nektar expression pedal, but I'm worried it won't be compatible. Thank you for making this video.
@mikaerik
3 жыл бұрын
I'm using Roland EV-5 expression pedal just because I've had it for ages and I've used different on/off foot switches, the one in the video is cheap Neewer switch. I'm pretty sure both Boss FS-7 and Nektar NX-P works well. Nektar even has a polarity switch which makes it compatible with loads of equipment.
@ShwigShwag
3 жыл бұрын
@@mikaerik thank you for the reply. Just to double check. When you have your expression pedal and your dual foot switch plugged in, you can use both buttons on your foot switch and still use the expression pedal? Or do you need to use a splitter cable from the dual foot switch and plug into both of the inputs on the back of the axe io in order to use both switches. One of the salesman at sweetwater gave me the impression that I would only be able to have a dual switch, or an expression pedal, not both. Or I could go with a single switch and an expression pedal.
@mikaerik
3 жыл бұрын
@@ShwigShwag I have an expression pedal in one input of the AXE I/O (external control) and the dual switch in second one. I do not have any splitters or extra stuff. If the dual switch has two cables then you probably need an adapter. You can see my older video for Amplitube 4 where it's explained and working kzitem.info/news/bejne/zKJ6yIhra3yBgmk
@ShwigShwag
3 жыл бұрын
@@mikaerik awesome. Thanks a ton for your time.
@ShwigShwag
3 жыл бұрын
@@mikaerik just wanted to come back and add to this for anyone else who is interested. I ended buying the nektar nx-p and the boss FS-6 they work great. If anyone decides to go with the boss or other similar two button foot switches make sure that you also pick up a 1/4" TRS cable. A regular TS instrument cable will not work if you want to use both buttons at the same time. Also make sure that the battery is connected. I've heard some say that the fs-6 and 7 can be used as latch only without power but amplitube wouldn't recognize any input without the fs-6 having powerr
@SonicVision
3 жыл бұрын
HI Mika, this video helped me, thanks. Have you noticed that 'parallel chains' don't work in full stereo in AT5 Looper? All other preset chains work fine but the parallel ones seem have audio mainly on left side. I'm wondering why this is. Also, can audio be imported into the Looper (I know it can in the 8 track)?
@mikak2747
3 жыл бұрын
Hi. If you mean the last option with two straight arrows you need to connect your audio source (guitar) in both left&right inputs of an audio interface to have both channels working. The other options have mono input which is sent to different amps. Correct me if I understood wrong!
@SonicVision
3 жыл бұрын
@@mikak2747 thanks, your answer does explain it and makes sense. Thanks. It's just strange how these same presets sound fine when just playing through them when not in the looper.
@michaelting1496
Жыл бұрын
Is there a way to edit/clear out the last part of the loop? There is a silent period of when I'm reaching the computer mouse to stop the loop recording. I searched the ik forums and it seems nobody has a solution to this.
@mikaerik
Жыл бұрын
I don't think so. If you don't have a foot switch you might try this kzitem.info/news/bejne/z2OdyYeInqGQqqg I know it's not the same but sometimes it's better than nothing. You can also import files to 8-track recorder kzitem.info/news/bejne/t2pv36eGjpGlh5g
@michaelting1496
Жыл бұрын
@@mikaerik Thanks! I actually got that video recommended to me a few hours ago and have done it by that method. It works well.
@CoolPabloDeTodo
10 ай бұрын
hello, can you tell what kind of footswitch is it and how to connect to the PC and Amplitube?
@mikaerik
9 ай бұрын
It's a simple on-off switch, maybe this video helps you. kzitem.info/news/bejne/s6edzKF6cH19gH4si=pW_Fdg3poWjB07R7
@oudaijawad5809
3 жыл бұрын
Would please make another video more clear and tell us which kind of foot switch that how to plugin to the interface from where we can find this switch more information if that possible. Thank you
@mikaerik
3 жыл бұрын
I'm using this in the video support.neewer.com/product/neewer-dual-channel-2-button-footswitch-controller-switcher-with-1-4-inch-jack-cable-for-guitar-bass-and-keyboard-amplifiers-with-on-off-switching-capability-nw-202/ It is a simple on/off switch. What kind of audio interface you are using?
@mikaerik
3 жыл бұрын
kzitem.info/news/bejne/s6edzKF6cH19gH4 this switch is very common and you can find it from local music store.
@bitethebullet6299
8 ай бұрын
would this work with an axe i/o one?
@mikaerik
8 ай бұрын
Yes it would. You should get a foot switch to operate it because without it it's not practical. Axe I/O One has sw/pedal inputs at the backside. Simple on/off switch works fine.
@bitethebullet6299
8 ай бұрын
I hooked up my marshall 2 button foot switch and it works like a dream thanks @@mikaerik
@CFox.7
Жыл бұрын
So Looper only activates in the standalone version not the DAW plugin version
@mikaerik
Жыл бұрын
Yes.
@CFox.7
Жыл бұрын
@@mikaerik thanks mate
@reid1967
2 жыл бұрын
I think I get what the AT5 looper is doing now but it's totally different to AT4, here's what I did in at4, is it even possible in AT5? in AT4 I recorded on loop1 the bass part for the chorus of a song, then recorded on loop2 the bass part for the verse, then I could stop and start the relevant bass part with the footswitches as I played the lead over it. This doesn't seem possible in AT5.
@mikaerik
2 жыл бұрын
Hi! You can play track 1 and 2 together or one at a time, each track itself can include several takes, I never used 4's looper but as you said it has changed.
@reid1967
2 жыл бұрын
@@mikaerik thanks but you can only stop and start with the mouse?
@mikaerik
2 жыл бұрын
@@reid1967 I don't think you can get it working the same way. You can assign for example footswitch 1 to looper 1 and looper global play to footswitch 2 but it does not work the way you want it to. Maybe 8-track recorder would be more flexible for this or a DAW?
@calyptratus187
2 жыл бұрын
can you use an actual looper pedal to operate it instead of a footswitch?
@mikaerik
2 жыл бұрын
Only if your pedal had a Midi out and it still would send only midi commands to Amplitube. You could not utilize the pedals inbuilt looper.
@santizsz
2 жыл бұрын
hey men! thanks a lot. i'm having glitches when recording with the looper. its realy anoying. I've a powerfull mac, so i know it isn't the RAM or the procesor. Any idea how to fix this?
@mikaerik
2 жыл бұрын
Sorry I missed your question and therefore late reply. Have you raised the buffer size from your audio interface?
@santizsz
2 жыл бұрын
@@mikaerik yes i have! No positivo results
@davyrockxx1563
3 жыл бұрын
is there a way to clear the loop without right clicking on it ?
@mikaerik
3 жыл бұрын
With Midi I don't think so, as far as I know there's no midi parameter for it. Would be handy especially in live situations. It states in the manual that you could "Clear all" with iRig Stomp I/O using Switch 4. I don't have it and therefore cannot test how it actually works.
@toninotarsi
2 жыл бұрын
Thank you very much. Your video is very clear and I was able to loop (Amplitube 5.3) . Anywhere I have a synchronization problem explained in the video below video. The looper looks to loose the synchronization after some start stop. Any hint ? Thx : kzitem.info/news/bejne/poum0YajipySn4I
@mikaerik
2 жыл бұрын
Hi! What audio interface you have and are you using ASIO drivers?
@toninotarsi
2 жыл бұрын
@@mikaerik The interface is a Beringher UM2 and I'm using FlexASIO . I will try now with ASIO4ALL.
@toninotarsi
2 жыл бұрын
@@mikaerik I Just tested ASIO4ALL (512 buffer) with exactly the same result :-(
@mikaerik
2 жыл бұрын
@@toninotarsi It sounds like a compatibility issue, have you tried a bigger buffer although 512 should be enough. Does Amplitube work fine otherwise? Do you have latest drivers in your computer?
Пікірлер: 52