Noooo Ridgeway noooooo. I can't believe it. This clock was my childhood. But I'm happy that it's fixed now
@LeoGabrielball
2 жыл бұрын
:’)
@gearzclocks1070
Жыл бұрын
RIP 2018-2022😪😪😪😪 But I am glad you to fix it and awesome job Kam 😎😎😎😎😎😎
@ogClockTV
Жыл бұрын
No need for a RIP. It's totally working fine now.
@FanTV474
2 жыл бұрын
Good job fixing it!
@onaughto
Жыл бұрын
Oh no well luckily it’s fixed now nice job fixing it.
@FidgetTV72
2 жыл бұрын
Awesome video
@clockstudio174
2 жыл бұрын
OO THE SPRING IS BUSTED
@clockstudio174
2 жыл бұрын
@@InstrumentFan2510 yes
@fazbear2546
3 ай бұрын
wave to the old movement hur, Say HUR HUR HUUUUUR *died* R.I.P BROKEN MOVEMENT
@trapzbeatz346
2 жыл бұрын
At least the clock is fixed! 👍
@lukascz6023
2 жыл бұрын
Good video 👍
@splittieful
2 жыл бұрын
Well you fix it congratulations
@fazbear2546
8 ай бұрын
Clock chimes when unscrewing the second screw. 5:16
@bprife
2 жыл бұрын
I’m sorry the old movement broke. The one my mom and dad gave me he busted the main spring while winding it and it was a little over 40 years ago. I can’t seem to get it fixed at a good price or I can’t get a new movement because I don’t know if they make the same movements for this one it’s a bracket clock that is arched on the top with a tempus fugit on the top but it sits up there for sentimental reasons but I wish I can get mine fixed. Because I want my parents to know that the clock will be working again but we tried a few places to get it fixed and just had no luck pricewise. But congratulations on getting your movement I hope it lasts a lot longer. When did you break the spring when did it happen?
@ogClockTV
2 жыл бұрын
I wound it a couple weeks ago and it seemed to run just fine. But a couple days later, I came home to find that it stopped working and the spring was broken.
@bprife
2 жыл бұрын
@@ogClockTV Well that’s an odd way for it to stop working in the spring to be broken. It working for a few days and then find it’s not working because of spring it broken that’s odd. I’ve heard of it like the spring with pop off or pop loose and break during the winding it’s like tuning a guitar you break a string kind a like that but I’ve never heard of winding it and then it would work for a couple of days and then stop on a broken spring because on a broken spring it could’ve broken while you were winding it and then stop working like that. But I’m glad you got a new movement for that because I know it be difficult to find the right spring for the old movement. I sure wish I could find someone to fix mine and put a new spring in hours and clean it I need a new chime rod to Costa fifth rod for the striking park what’s the one it’s broke but the other four for the Westminster‘s working fine still intact. But I’m glad you got your fix there buddy keep up some more good videos of your clocks
@Momgumery
2 жыл бұрын
Same thing happened to my key powered mantle clock but the spring for the chime is busted but the main spring is still good and it runs perfectly just don’t chime anymore
@ogClockTV
2 жыл бұрын
That’s too bad!
@Momgumery
2 жыл бұрын
@@ogClockTV it still runs perfectly just dosent chime anymore
@woodentrainseriesofficial9511
2 жыл бұрын
@@ogClockTV do you have an ansonia?
@LeoGabrielball
2 жыл бұрын
Why the keyhole was busted?
@theray2009
2 жыл бұрын
The same happened to my ammas Gazo clock and the movement was replaced
@Bhatz96
2 жыл бұрын
Are you going to keep the old movement?
@ogClockTV
2 жыл бұрын
I plan to yes, until I can find a way to put it to good use.
@mariamolayinka6120
2 жыл бұрын
I don't think so.
@vintagesimplexfirealarmsof6440
2 жыл бұрын
I got a idea take the old mouting bracket from old and stick it on new one
@MK-ge2mh
2 жыл бұрын
BTW, did you oil the new movement? They usually come requiring oil.
@ogClockTV
2 жыл бұрын
Yes. I just oiled it.
@SamTheMountainBikeBeast
2 жыл бұрын
I wonder if it could have been fine if you just replaced the mainspring
@ogClockTV
2 жыл бұрын
That would be a bit too complicated for me.
@MK-ge2mh
2 жыл бұрын
@@ogClockTV Oh come on! It's very easy!
@crazychicken2005
2 жыл бұрын
Nice job fixing it. Can we get an f in the reply for the old movement?
@woodentrainseriesofficial9511
2 жыл бұрын
t
@woodentrainseriesofficial9511
2 жыл бұрын
no f
@mariamolayinka6120
2 жыл бұрын
Oh no! What happened?
@ogClockTV
2 жыл бұрын
Mainspring broke unexpectedly.
@MK-ge2mh
2 жыл бұрын
Why didn't you just install a new spring? You can get them pre-installed in the barrel and just replace the barrel. You don't even need to disassemble the movement to get the barrel out. That's a lot of money for a new movement when you could've replaced the spring for under $20.
@ogClockTV
2 жыл бұрын
I forgot to mention this, but I’m just a beginner repairer and actually replacing the mainspring is a bit too complex for my skills as of right now. I haven’t wanted to attempt something like this as I’m afraid I’ll mess something up.
Пікірлер: 42