Thank you. I would soon have a ladder and the right PPE. or I'm also accepting donations 😅
@sensen6393
Жыл бұрын
Boss if mag drill ba magbubutas muna Ng maliit I mean maliit na drill bit muna bago Yung 3/8 para di mag crack?
@jeyworx
Жыл бұрын
mas madali butasan kung from small bit muna then switch big bit. pwede din nman big bit na agad natry ko na, at wala nman nagcrack na concrete wall..
@sensen6393
Жыл бұрын
Ano Po kaya mas better na 3/8 or 5/16 for pull ups bar Yung NASA shapi malambot Yung free na bolt nila eh
@jeyworx
Жыл бұрын
3/8 the bigger the stronger hold ng pull ups bar mo. pwede din 5/16 bsta atleast 8 holes and dipende sa pgkakalagay. matibay na wall and maayos ang pgkaka-install ng mga dynabolt.
@sensen6393
Жыл бұрын
@@jeyworx ty last 😂, which are more better to use 50 or 60 mm. Is 3/8 50 mm dyna enough? Mas madali pati ikabit medj mahaba 60😂
@jeyworx
Жыл бұрын
pwede ang 50, basta maayos ang pagkakalagay. matatag na yan.. suggest ko lang pra sure ka sa size ng hole, both drill bit and dynabolt. bili ka ng caliper sa bookstore khit yung plastic lang, mura lang yun and gamitin mo pangcompare ng size kung match.. it's up to you.. good luck po sa project niyo. kung may tanong po kayo.. ok lang po☺️ good day
@ALIC7R
Ай бұрын
Can it be installed on plaster?
@jeyworx
Ай бұрын
Yes, usually it is installed in a plastered concrete wall
@ALIC7R
Ай бұрын
My wall is made of plastered bricks. I hope it works
@jeyworx
Ай бұрын
@@ALIC7R Hi if the wall was made with good quality. it would definitely work. thanks!
@ALIC7R
Ай бұрын
@@jeyworx thanks
@subkreature
Жыл бұрын
This is specifically for concrete/stone/plaster and not for a metal stud, right?
@jeyworx
Жыл бұрын
Yes sir.
@muhamedashrafc2993
8 ай бұрын
How did you pressed the last bolt to the hole? Do you had extra that thing?
@jeyworx
8 ай бұрын
you just need to make sure that the dynabolt fits exactly or a little stiff so all the dynabolts would easily turn and properly screw. what do you mean extra thing?
@muhamedashrafc2993
8 ай бұрын
Thanks for addressing my query.... You are using the expansion cover of one bolt to hammer to push the dynabolt fit in the hole..???
@jeyworx
8 ай бұрын
Yes, since they have the same size in diameter. in some or most construction site they do this practice, which i think effective. 👍 you may also watch the full video on the link below👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0si=0-qzLM7XJ-75rKK9
@xairulehady6603
Жыл бұрын
If the dynabolt is M6 x 75, what is the size for drill in mm
@jeyworx
Жыл бұрын
it's 12mm. you can watch the full video on my channel. link below 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0
@Hein.x
Жыл бұрын
If 3/8 dyna bolt ginamit, 3/8 din na drill bit boss?
@jeyworx
11 ай бұрын
3/8 is equal to 9.5mm ..much better kung isukat mo yung lapad ng bolt sa drill bit. sa mga hardware sir once you buy the dynabolt alam na nila size ng drill bit.
@Hein.x
Жыл бұрын
Pano po Malaman ma okay na Yung pag ikot sa dyna bolt pag ayaw na talaga umukot let pwersahin?
@jeyworx
Жыл бұрын
Yes, kapag halos ayaw ng umikot ok na yun.. matatantsa mo naman . di mo na mabubunot
@MrZderable
2 ай бұрын
boss pwede na yan sa steel bed?.. yung pra nka hang
@jeyworx
2 ай бұрын
pwede sir, bsta matibay at maayos ang wall. also mganda pgkakayari ng steel bed and yung pgkakainstall ng dynabolt
@sunnydeo123
Жыл бұрын
Is that mask for dust from drilling? 😅
@jeyworx
Жыл бұрын
Face mask for C19. since it's an outdoor work it doesn't need to use a mask for dust. and I don't want to...☺️..
@jeyworx
Жыл бұрын
full video link 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0&feature=share7
@JenniferYao-p1b
Ай бұрын
Hello, I am in the fastener business. May I collaborate with you?😊
@jeyworx
Ай бұрын
Hi! How?
@JenniferYao-p1b
Ай бұрын
@@jeyworx Hi, can I contact with you
@jeyworx
Ай бұрын
Yes,you may send me an email at jcanlas1687@gmail.com . let me know once you've sent your message. thanks!
@JenniferYao-p1b
Ай бұрын
@@jeyworx I have contacted you. Have you received my email?
@jeyworx
Ай бұрын
hi. yeah i replied
@deguzmanjayson1747
7 ай бұрын
anong bit size po para sa dynabolt na 5/16
@jeyworx
7 ай бұрын
12mm drill bit size. para sigurado eto po full video link ng 5/16 na dynabolt ,👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0si=2F6DU_tTVnxSG5Tv
@areldcookie5581
Жыл бұрын
If m4 50mm what drill size is suitable?
@jeyworx
Жыл бұрын
Bolt Diameter: M4 Length: 50mm Drill Size: 11mm - 12mm Driver: PH2 full video link 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0&feature=share7
@areldcookie5581
Жыл бұрын
@@jeyworx thank you. Can I fit 12mm drill bit in a limited 1-10mm drill. Because the tip is slightly larger than the bottom, right?
@jeyworx
Жыл бұрын
it depends on the bit there are bits, that has larger tip with smaller bottom that would fit on small drill/small chuck. like yours. as long as it will fit. it will work but would take some time depending on the drill. or I suggest, use a bigger drill that has hammer for an easy work.
@areldcookie5581
Жыл бұрын
@@jeyworx thanks bro. My drill is a hammer drill that just has a small chuck. Your info help me so much. I will find 12mm drill
@jeyworx
Жыл бұрын
You're welcome!☺️ Thanks for watching!
@wesleyjin8071
8 ай бұрын
dyna this with what drill size???
@jeyworx
8 ай бұрын
12mm concrete drill bit sir..
@jeyworx
8 ай бұрын
12mm concrete drill bit sir. full video link below 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0si=m2ilXKJwOWrorinz Thanks for watching!
@sensen6393
Жыл бұрын
Is that 3/8 dyna bolt?
@jeyworx
Жыл бұрын
it's a 5/16 dyna bolt. link below of full video 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0&feature=share7
@EFD620G
Жыл бұрын
DIY job with a chair instead of a ladder
@jeyworx
Жыл бұрын
full video link👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0&feature=share7 I also accept donation so i could buy a ladder😅 PayPal me @ jeyworx1687@gmail.com
@oyabitv1302
Жыл бұрын
size
@jeyworx
Жыл бұрын
5/16
@jeyworx
Жыл бұрын
full video link 👇 kzitem.info/news/bejne/uIWK1otsoqNyiG0&feature=share7
Пікірлер: 56