Namaste. Thanks for the video. It.s very usefull and clearly. Interesting for calculating rubber parts of machines
@VLAHECO
8 жыл бұрын
WOWWW...SO CLEAR TUTORIAL. THANK YOU FOR SHARING. I CHECKED YOUR WEBSITE AND YOU HAVE VERY COOL TUTORIALS
@powderdescent
5 ай бұрын
Set speed to 1.75x. You're welcome.
@RacingDante7
7 жыл бұрын
Hi Mr. CAE Worldwide. First of all I would like to thanks you for such a good video, and also for making it easy to follow and understand. I would like to make you some question, if there is no problem: 1) i'm trying to put the elastomer material as the one wich defors, with an desplacement almost exacly as in your video, but when the solver runs, it does not move or deform at all. ¿Have you presented the same problem? ¿know how to solve this problem? 2) When the solver is processing the simulation, i see some vertical bars, that are called "Bisection Ocurred". ¿What does this means?, ask you this because use to happen a lot of the time when I'm runing the solver and don't know if it means something bad?? thank you very much for your time and explanation, that i'm sure it would help a lot of people how are learning by itself! :D
@yipinglee6480
2 жыл бұрын
nice job
@markgoeroeg9681
6 жыл бұрын
Thumbs up!
@alirezaborjali1451
5 жыл бұрын
This was very helpful! THANK YOU very much :) :) :)
@sahinsozen3946
7 жыл бұрын
Thank you for your clear presantation.
@expertfea_com
9 жыл бұрын
Very nice FEA!
@ANSYS-India
9 жыл бұрын
Thank you, pls visit my website for more videos and information. sites.google.com/site/feaengineeringdesign/
@vaibhavrajkukreja843
5 жыл бұрын
The contact point should also develop a stress concentration which is not visible. I don't know the reason here, though I am pondering on it.
@hoseynamiri
Жыл бұрын
I guess he is visualizing the deformation and not the stress. That's why the distribution is not concentrated locally!
@user-po8re9fp7h
4 ай бұрын
I'd like to know the material type of hyperelastic
@oumaimaelkadi3137
3 жыл бұрын
In my case I have EPDM as a material, should I select Mooney rivlin
@ahmedbadral-dean4273
8 жыл бұрын
thanks its very useful I did it already but I the two out side bodies not feel by the intermediate one means no contact between bodies I don't know why?
@ANSYS-India
8 жыл бұрын
+Ahmed Al-dean check the contact status and boundary conditions
@mohamedaloui1180
6 жыл бұрын
Can you show me how to model an extrusion process in structural static of silicone rubber
@emebarak31
8 жыл бұрын
thx
@andrewwong4827
9 жыл бұрын
Excellent Tutorial, can I ask whether it is possible for ansys to calculate the force that is being applied to the hyper-elastic material that is in contact with polyethene while it is moving?
@ANSYS-India
9 жыл бұрын
Andrew, It is possible, pullout force as well as reaction force can be evaluated on both bodies.
@JithinDevan
8 жыл бұрын
DO you have similar videos on Abaqus?
@nikhilshri7889
4 жыл бұрын
can you please tell me how to do poroelastic material analysis?
@salvatorebasso5657
5 жыл бұрын
How I can treat 3D just penetrated components of different materials (steel-rubber)?
@03Madness
6 жыл бұрын
REALLY NEED HELP! I'm trying to use Mooney Rivlin in a 3D model but the material is expanding rapidly at impact. Could my values be wrong? C10 = 85.5kPa and C01 = 21.38kPa and I calculated D1 to be 9.36e-8. Could the "Curve fitting" function be overriding my values?
@abdullahbta921
2 жыл бұрын
Hi Maddy, I am working to find new New mathematical hyperelastic model using abaqus, do you know how to use this code to build hyperelastic matetial
@amkc12
Жыл бұрын
I used Yeoh model where material is assumed to be incompressible.
@yugamsinghkushwaha7188
4 жыл бұрын
when i place parameter its aking me to enter density also can u help me plz
@noohm2385
2 жыл бұрын
bro how to apply mooney rivlen for human tissue
@ermdallauddinansari1948
3 жыл бұрын
Helo sir
@jacobjaames
9 жыл бұрын
HI I have a question! Why I can't find advanced geometry options in geometry mode?
@ANSYS-India
9 жыл бұрын
Which option/command are you looking for in geometry??
@jacobjaames
9 жыл бұрын
GRS CAD/CAE HI ! I have email you the question I hope you can understand what I mean... My english skill is not so well....
@ANSYS-India
9 жыл бұрын
Hope you got the answer.
@spenka3454
5 жыл бұрын
你好,我在design modeler里也找不到那个geometry options in geometry mode,你的问题现在解决了吗
@FkngDot
4 жыл бұрын
@@ANSYS-India I have the same exact question regarding it not showing up, help please?
Пікірлер: 39