Hi nick, are you using loopback feature to capture your screen+your audio? Btw, great video review.
@Nick666
3 жыл бұрын
Hi, and thanks for the comment! I recorded the audio using my DAW Logic just for adjusting the volume later. I think that should not be any differences if I used the loopback feature!
@Turtlpwr
Жыл бұрын
Are you going through a DI into the interface or straight in guitar to interface?
@Nick666
Жыл бұрын
I’m playing straight into the interface, no DI needed if you’re playing in the Hi-z mode
@georgeangelakopoulos8884
3 жыл бұрын
Nice review!!! How much gain is used in the hi-z input?
@georgeangelakopoulos8884
3 жыл бұрын
Just saw, 30db!
@Nick666
3 жыл бұрын
@@georgeangelakopoulos8884 Yep, it's really sensitive and it depends of the output of your guitar and how hard you are picking
@chozngodson110
3 жыл бұрын
Are you having any hum or static noise coming from studio monitors because I'm having that issue and can't figure it out
@Nick666
3 жыл бұрын
Hi, no noise at all on my monitors. Sometimes the hum of the Zen Go is related to the brightness of the display, try to set the brightness at 100% it could help . If have any problems try contacting the Antelope support they're very helpful
@v3zMedia
3 жыл бұрын
@@Nick666 They have a firmware update that fixes this now.
@Nick666
3 жыл бұрын
@@v3zMedia thanks man, glad to hear that a lot of bugs are fixed now
@v3zMedia
3 жыл бұрын
@@Nick666 I found out after doing research on it today for an artist I work with who's building a setup to record himself. I'm an Apollo x4 owner myself.
@worldparfum8564
3 жыл бұрын
Hello ,how do you rec with the afx zen go on fl studio please, i choose afx compresser Eq... but rec on fl i dont know how
@Nick666
3 жыл бұрын
Hi! I don't use FL as my DAW. As general advice you have to select the right input in FL. For example if you're gonna record using preamp 1 (like me in the video) select to record from input 1 in FL studio
@worldparfum8564
3 жыл бұрын
@@Nick666 ty Nick so it will be record with the effect of zen go
@Nick666
3 жыл бұрын
@@worldparfum8564 yes, sure. You can record the dry track (with no effects) in the same time if you want. In control panel simply click on the track 5 of the mixer (default is spdif 1) and select preamp 1, then in your daw you must create a new track using input 5. In this way you can record track 1 (with the zen go effects) and track 5 (with no effects). Hope this is usefull
@ИнновационныеДорожныеТехнологи
3 жыл бұрын
RME is ahead. I sold my Zen Go. I bought an RME bf pro fs and became happy. Zen GO created a lot of problems for me , it hurts me to remember it. Everything is fine on paper and in advertising, but in fact the Sound is bad , the drivers are bad, like everything else. I'm done with ANTELOPE once and for all !!! Six months ago, Zen Go was worth + 150 euros. Now + 1600 euros. for the same money. In this regard, it was difficult for me to sell Zen Go/ I had to sell it very cheap. Stop marketing !!!
@Nick666
3 жыл бұрын
Hi and thanks for your comment. I have the Zen GO from about 6 months and I can't complain about it, I'm sorry for you're problems with the Zen Go and I know some people in forums had similar problems but it's definitely not my case. Don't know if it makes any differences but I'm using it with a 2019 Macbook Pro. I'm happy for you're RME and have fun!
@ИнновационныеДорожныеТехнологи
3 жыл бұрын
@@Nick666 Hi I used it with win 10 pro
@ИнновационныеДорожныеТехнологи
3 жыл бұрын
@@Nick666 Thank you for the video! Super!
@davidroikit8121
3 жыл бұрын
Really like the idea of this unit but this demo sounds average.
@Nick666
3 жыл бұрын
Thanks for your feedback David! This is my first demo on KZitem, hope to do better in the future :)
@Siberguy2008
3 жыл бұрын
I have this unit and I'd say the amps are fine but not always the best. They are certainly good enough for monitoring and in some cases sound worthy of keeping. That opinion may change with more experience. I'd recommend always recording a dry signal just in case. The big plus for me is that I find the mic effects really nice. My treated tracks sound better than the dry. In fact I have yet to find a plugin chain to bring the dry up to the the pre processed track. I've had this 3 days and I like it quite a bit. I will always record the dry as well just in case.
@Nick666
3 жыл бұрын
@@Siberguy2008 I agree. The guitar amps are ok but I think the stuff from Neural Dsp is far better (in some other video I'm using the Archetype Nolly plugin and I like so much the result). At the end of the day I think the Antelope plugins have at least a good dinamic, as you can hear I'm trying to stress the dinamic and the plugins respond very well imho. From other aspects like routing and sound quality of the signal the Zen Go is absolutely dope and I love it. Not used the mic effects yet but I'm glad you liked them!
Пікірлер: 26