Our Sales representative Mark walks you through how to make sure your entire unit has been anti-freeze'd so that you can safely leave your equipment out in cold conditions.
Please visit our website at www.usjetting.com or call us at 866-382-0557 for more details.
For purchase inquiries, contact us at sales@usjetting.com
How to Anti-Freeze your 4018 Jetter.
1. On the front of your unit near the engine, turn off the water valve and open up your anti-freeze valve
2. After valve is open, open the primer valve next and allow it to suck up the anti-freeze
3. Once the water turns green, you know the anti-freeze is through and you can turn off the primer valve
4. Go the the back of your machine to anti-freeze the hose.
5. Take your hose in hand, crank the machine, and turn the water on
6. Once the water is running, wait until it turns green to know that the anti-freeze has gone through
7. Turn off the water
8. Anti-freeze water return lines. The first line is under the main white box on the back of your unit. Run the line briefly and close it. The second line is on the front of the unit. Run it using pulsation and turn it off. Turn off whole unit.
9. Go back to the front of the unit where you started. You are going to back feed your anti-freeze through your water supply line.
10. Crack the water supply line to get anti-freeze into the line, then close.
Done!
Негізгі бет Ғылым және технология Anti-Freezing Your 4018 Jetter
Пікірлер