#restoration #toolrestoration #ironrestoration
If you want to support my channel hit the like, leave a comment, subscribe, and share my work. It helps a lot! :-)
PATREON: www.patreon.com/user?u=46295862
Subscribe bit.ly/2klQknQ
In this video, I restored an Antique Rusty Charcoal Iron. I found it from an area market. The charcoal iron was abandoned and in a bad condition. It was super rusty, these irons were made around 1930
and got fixed in the meantime. all parts had lots of play. Time to do a restoration on this old rusty iron! I started by removing the parts. After disassembling I give them just a quick bath to remove loose rust and dust. Then, As usual, I used
phosphoric acid for 30 minutes for all the rusty parts,
wire brush them, Apply wd-40 on them, and gave them a wd-40 fur curing. The metal is dark beyond the rust. Because this beauty was heat blued once.
just a quick sanding for the outside areas with grit 120, from inside pitting will stay to keep an antique look. I Polished the Bottom side and protected it with tape.
for the paint job, I used golden color.
Antique Rusty Charcoal Iron - Restoration
Негізгі бет Тәжірибелік нұсқаулар және стиль Antique Rusty Charcoal Iron - Restoration
Пікірлер: 30