YOU SHOOTED 12 AGAIN, PETER, YOU ARE AMAZING I wish it was possible to work with you, you are my dream master, we are waiting for the continuation of the works
@JaapGrootveld
Жыл бұрын
I love what you done to this piece of steel...
@kenpickles4707
Жыл бұрын
Superb the attention to detail is out of this world!
@mep1624
Жыл бұрын
Amazing. I was educated in this trade many years ago and can understand your methods. It is all on a stratospheric level of professional!! Thank you very much.
@rerun578
Жыл бұрын
Loved the "comin at you" view. Nice work, Peter!
@sambrose1
Жыл бұрын
Thank you for posting this stuff. The work you do is neat but you make it fascinating.
@comictrio
Жыл бұрын
Looks fantastic, so does the logo.
@ianmcdonald7368
Жыл бұрын
g'day Peter. I'm sure the programming was challenging, I don't program. what I did find most impressive was the tool geometry that allowed the broaching cycle without deflection to achieve the width of cut on 2 axes with what appeared to be consistent depth of cut, that was impressive. to force the machine to perform a cycle is one thing.... to have an understanding of what geometry works when you push the machine boundaries is a whole different level.
@shaneroper5470
Жыл бұрын
I might be interesting one day, too see if you can make a Fractal Vise. Amazing little tool.
@bcbloc02
Жыл бұрын
Watching the shaping was mesmerizing.
@1ginner1
Жыл бұрын
Hi Pete, That anvil is a thing of beauty, keep up the good work, best wishes, Mal.
@bhoiiii
Жыл бұрын
Cnc shaper? Didn’t know such a thing existed. Great video as always.
@Thorhian
Жыл бұрын
I’ve seen a lathe turret attachment recently that works like a mini shaper. Looked like a live tool that turned rotational motion into linear motion.
@somebodyelse6673
Жыл бұрын
@@Thorhian Was the motion on the cutting axis done by the attachment, or by the lathe carriage? e.g. was it a mini-slotter attachment? Just a passive tool that worked like what Peter showed here?
@Thorhian
Жыл бұрын
@@somebodyelse6673 The motion was done by the attachment. It was used in a Mazak Lathe Video kzitem.info/news/bejne/o4xt2ZaqrZ17pag
@WillemvanLonden
Жыл бұрын
"The Hardy hole came out pretty good." Don't put your light under a bushel, Peter. Fascinating stuff you post.
@tymcclengineering8672
Жыл бұрын
Forever learning from you Peter, Thanks again.
@GroovyVideo2
Жыл бұрын
i like machining patter - looks like art
@Ujeb08
Жыл бұрын
I liked the broaching operation. Man it was smooth as silk!
@davesalzer3220
Жыл бұрын
Best looking anvil I’ve ever seen
@tdg911
Жыл бұрын
Very nice work. always love watching your videos. Thank you
@dannywilsher4165
Жыл бұрын
Nice job Peter!!!!!
@owievisie
Жыл бұрын
We way you programmed that square chamfer was beatifull
@EdgePrecision
Жыл бұрын
It's the only way to get the sharp mitered corners. If I did it straight in with a chamfer milling cutter it would leave a radius and not get into the sharp corner.
@kenjohnson5715
Жыл бұрын
As I have often heard… your only limited by your imagination. In your case… we have not seen your limits. As always excellent . Thank you 😊
@ReubenSchoots
Жыл бұрын
Awesome stuff, Peter. Thanks for sharing.
@dav1dsm1th
Жыл бұрын
Amazing results. Thanks for the videos.
@johncroasdale2748
Жыл бұрын
SUPERB in every aspect!
@TrPrecisionMachining
Жыл бұрын
very good job peter..thaks for your time
@brianbob7514
Жыл бұрын
Beautiful peace of work
@CapeCodCNC
Жыл бұрын
Absolutely amazing! I would love to have something like that in my shop...
@cpayne8177
Жыл бұрын
A real work of art.
@Musicalbullet
Жыл бұрын
Beautiful work Peter!
@_domlnlk_
Жыл бұрын
I love it ... 💙
@tfp777
Жыл бұрын
Another Masterpiece
@drummerhammar
Жыл бұрын
Fine work once again!
@glendaleclassiccarwashiish4727
Жыл бұрын
You are genius you are master of your work.
@jimsvideos7201
Жыл бұрын
I figured I'd see a CNC shaper sooner or later 😀 This might be a slightly light-hearted application for it but the technique could have all kinds of uses.
@poetac15
Жыл бұрын
As they say, you can make anything with a shaper… besides profit:)
@akfarmboy49
Жыл бұрын
Cross hatch pattern on logo was good idea.
@NautiRulz
Жыл бұрын
Awesome!
@stevensmart8868
Жыл бұрын
Best anvil ever.
@glenncerny8403
Жыл бұрын
I enjoyed watching this exercise in creating an anvil with software and automation. At the same time I couldn't shake the nagging notion that harbor freight sells anvils for about 50 bucks. Smile. Its a great day somewhere.
@EdgePrecision
Жыл бұрын
Correction. Harbor Freight sells what they call an anvil for 50 bucks. It isn’t really a anvil. It’s not something a serious blacksmith would use.
@prototype3a
Жыл бұрын
Sort of interesting that these "fancy" CAM packages don't have broaching cycles built in. I get that it is probably an uncommon process today but on the other hand, it would likely be a fairly simple bit of code to add compared to all the 5axis crazy code these packages can handle.
@EdgePrecision
Жыл бұрын
I have used this cutting style quite a few times in the past. For instance if you want to cut a internal keyway or a spline. In some of my emailer videos I show removing sections of a ID thread to make sort of a breach closure or cutting around a internal integral key in a bore. To establish the sharp internal corners the endmill could not do. So yes it would be very useful to have a cycle in Cam for this.
@CncFrezar
Жыл бұрын
Super 👍
@jupton1900
Жыл бұрын
Great work as always Peter. I would be really interested to see how you programmed the broaching in esprit.
@EdgePrecision
Жыл бұрын
I used the manual program cycle. But even that won’t completely work, because you can’t do a manual milling cycle with the spindle stopped. The Mazak will give an alarm if you define the tool as a lathe tool but command the milling spindle to start. But I found out this. I could program the cycles with the spindle running in Esprit. Then select all the cycles their settings edit tab and tell it they don’t have the spindle on or a spindle speed. It will then process code without the spindle commands in the code. It even shows the spindle stopped in the simulation. If Esprit would let me define a square milling tool. It would even simulate the material removal accurately. I may check with support and see if that’s possible.
@oostburgjblok
Жыл бұрын
@@EdgePrecision as of 2021 R3 there is broaching specifically supported in Esprit. I am not sure how it would best apply on your broaching cycle. I haven't used it much. A custom macro called via manual entry is how I usually handle it.
@EdgePrecision
Жыл бұрын
@@oostburgjblok I’m using Esprit TNG here. If they had a method to define a milling tool I could even simulate it. I did define a adaptive item of the tool. But there is no way to add a cutting edge. I can define a lathe tool I their software by moving the insert I the correct position. But it won’t let me select the lathe tool in the manual milling cycle. It doesn’t even show them as a selection. But what you saw in this video was completely processed in Esprit TNG. No edits in the code afterwards.
@REDRIDER101
Жыл бұрын
I very much want one of these for my shop :P
@pyrobeav2005
Жыл бұрын
I'd be pretty happy just to have a shop into which it would fit! 🤣Assuming you meant the Integrex, of course.
@REDRIDER101
Жыл бұрын
@@pyrobeav2005 I meant the anvil, but I would love a big mazak
@chris-graham
Жыл бұрын
This is a much better technique than using a square drill
@purerhodium
Жыл бұрын
I can't remember if you mentioned it anywhere, but is that shaping tool carbide?
@EdgePrecision
Жыл бұрын
Yes it carbide. I made it on my grinder.
@user-N_1
Жыл бұрын
Very cool!) Please tell me, when chiseling a square groove, what kind of tool did you use. Is he on sale?
@EdgePrecision
Жыл бұрын
I made (Ground) the tool on my grinder. It is a special tool.
@skfh3
Жыл бұрын
Awesome as always! Trying to figure out what video you had the sub program info in that you mentioned here.
@skfh3
Жыл бұрын
Ah, I see how you did the other hardy hole now. I just have to translate that now:)
@GRTLRS
Жыл бұрын
The hardy hole looks good. I don't remember if you previously showed the making of the broach tool or not? And the engraving turned out pretty sweet too. I like that textured look. Nice job Peter
@EdgePrecision
Жыл бұрын
It’s the same tool I used for the large anvil. I don’t think I made a video on the making of this tool. Maybe I showed something in the large anvil videos. I can’t remember.
@purerhodium
Жыл бұрын
@@EdgePrecision I went back to watch the old video, you did show the simulation of grinding the part. I didn't know NumRoto supported grinding non-rotating tools as well.
@EdgePrecision
Жыл бұрын
@@purerhodium there is what they call manual grinding paths. That’s what I use for these kind of tools.
@purerhodium
Жыл бұрын
@@EdgePrecision If you have the time it'd be interesting to see how you program that.
@EdgePrecision
Жыл бұрын
@@purerhodium There are modulas for Numroto that I don’t have. I think one can grind things like turning inserts. But I have ground all kind of lathe tools with what I have. You just have to sort of imagen them as a single flute tool. Then make a fixture to hold a insert as if it were that single flute location. Or I have ground boring bars like micro 100 tools. If you do a manual move where you grind a diameter. Sort of like a wide groove in a round blank. I the manual grinding path there is some settings to offset that path in all axi. But if you offset the tools rotary axis off center. It will grind that groove so to speak with its axis off center of the rotation. This way you can grind the shank relief off center like a Micro 100 tool has. Then use some more manual moves to grind the cutting edges of the tip of the bar. Just make the simulation what you want and it will grind it. You need to experiment with the manual grinding path and the end tab that has the offsets. Sort of like fixture offsets on a normal machine. Maybe I can do a video showing some settings for these things.
@prepertruckin8525
9 ай бұрын
⭕️have you any video's of these and the 250lbs anvil in use... im wondering how they're holding up under normal use...
@JustinAlexanderBell
Жыл бұрын
Good job
@keithburt2858
Жыл бұрын
Thanks for posting ,your work is amazing .Do you have any slideway loading that you have to override when doing the shaping? Yove definately mastered some techniques on your machines.Thanks!
@EdgePrecision
Жыл бұрын
This kind of machining puts very little load on the machine. It doesn’t even register on the load indicators. There are far greater loads in normal milling, drilling and turning operations.
@y788lhjk1
Жыл бұрын
How did you do the cross pattern on the logo did you thread it as a normal floor finnish operation on cam and just use engrave endmill or what
@EdgePrecision
Жыл бұрын
It’s just two pocket floor finish passes with a one way linear cut directions. One at 45 degrees and one at -45 degrees. I tried a zig zag pattern but it didn’t do that without some passes going across at some weird angle that didn’t match the pattern.
@dizzolve
Жыл бұрын
does the spindle move a few thou on the back stroke to avoid rubbing? or not necc
@EdgePrecision
Жыл бұрын
Yes it is moving .010” away on the back stroke. And feeding in .002” per cutting pass.
@maticbritovsek3662
Жыл бұрын
Nice work Peter! What tool did you use for the engraving?
@EdgePrecision
Жыл бұрын
Just a regular 60 degree single flute engraving tool.
@medic593
Жыл бұрын
What I wouldn’t give for one of those anvils.
@reneclipse2874
Жыл бұрын
❤
@kimber1958
Жыл бұрын
***** A+ VERY FINE
@Xlaxsauce
Жыл бұрын
why does it look like the strokes are not all the same length when you broach the hardy hole?
@EdgePrecision
Жыл бұрын
You are getting a distortion due to the cameras wide angle lens and the view angle. The tool is taking .002” off each cut and backing off .010” when it retracts. So as not to drag the cutting edge backwards on the material. Believe me all the cuts are the same.
@somebodyelse6673
Жыл бұрын
@@EdgePrecision - You are one of very few people on KZitem that I actually believe when they says "believe me". May you always use your powers for good!
@johnandruch5585
Жыл бұрын
That's a very expensive shaper you have there... 😁
@navaho5430
Жыл бұрын
Nice what does the logo stand for cheers.
@EdgePrecision
Жыл бұрын
It’s my names initials.
@johnshelley2540
Жыл бұрын
How close is the tool changer to meeting the previous zero, ?
@EdgePrecision
Жыл бұрын
I’m not sure I understand. Are you asking how repeatable the tool changes in the spindle? If that’s it, it’s closer than the machines positional resolution.
@johnshelley2540
Жыл бұрын
So repeat selection of a tool will be spot on?
@EdgePrecision
Жыл бұрын
Yes. Within the precision necessary for machine work. Nothing is spot on (As you put it) perfect.
@smedoz
Жыл бұрын
What do you do with all of the anvils you have made?
@EdgePrecision
Жыл бұрын
I was making them for a 50,000 sub giveaway. It's been taking so long. It may have to be a 100,000 sub giveaway instead.
@number40Fan
Жыл бұрын
You just made a bunch of shaper owners very jealous.
@ryannoppe247
Жыл бұрын
Me and Bill want to stop by again.
@EdgePrecision
Жыл бұрын
Whenever you like.
@ryannoppe247
Жыл бұрын
@@EdgePrecision thanks Peter will stop by sometime. Bill is starting to move slow. But I love having hime around.
@billygoat12
Жыл бұрын
is this the anvil gs tongs has?
@EdgePrecision
Жыл бұрын
No he had his made where he is. His are just mostly square blocks of steel.
@Exotic_xWasteD
Жыл бұрын
first video: it's my first time... :D
@EdgePrecision
Жыл бұрын
Thanks Exotic! Glad you watched.
@fredrezfield1629
Жыл бұрын
what's an anvil for? ? throwing ?
@EdgePrecision
Жыл бұрын
Typically it is used by a Blacksmith. But I suppose you could try to throw one, if you could. Its kind of heavy for that.
@seimela
Жыл бұрын
this is bad for both spindle bearing ,keep well
@EdgePrecision
Жыл бұрын
Not on this machine. It is designed for this. It has a special coupling in the spindle designed to take the force of turning tool on it and not on the milling spindle. That said this would actually put less force on the this spindle bearings of a normal machine than milling or drilling does.
@marossgnv
Жыл бұрын
So, using a high speed multi axis CNC as a shaper 😂🤣😂🤣
@rizdalegend
Жыл бұрын
What was the material again?
@EdgePrecision
Жыл бұрын
4340
@dennyskerb4992
Жыл бұрын
I can’t understand why my girlfriend has a broaching machine in her bedroom.
@joesikkspac7904
Жыл бұрын
The real test will be pounding on hot iron or steel. How much bounce does this anvil have? Drop a 1/2" or 12mm ball bearing on it and see how high it bounces. Listen to the ring. Do it up and down the surfaces to check for consistency throughout.
@EdgePrecision
Жыл бұрын
Well right now the steel isn’t really heat treated. It’s not soft sort of like a comercial heat treat. If I got the anvils induction heat treated on the top surfaces then this would be a proper anvil. I may look into that.
@sorrycharlie4127
Жыл бұрын
Finish looks like s**t!👎🏻
@EdgePrecision
Жыл бұрын
Do you feel better now? I’m glad I could help Sorry.
@pyrobeav2005
Жыл бұрын
Because of the tool marks? Nah, the finish is good for a machined part, and phenomenal for being done with that many axes. The tool marks on most of it look so faint you probably couldn't find them by touch.
@smedoz
Жыл бұрын
Hahahaha, do you feel better now. Made my day with that comment.
Пікірлер: 115