Check out this video showcasing the entire multi-colored print process from start to finish: kzitem.info67yMsqEjbow
@KolMan2000
4 ай бұрын
I do find it a little disappointing that this video neither shows it actively doing multicolor printing nor shows the up close print quality of the benchy. It’s not that I expect it to be bad, I just feel like it would be beneficial to actually see it doing the thing it’s advertised to do.
@Rick-vm8bl
4 ай бұрын
Seems to be a common trend with all the new AMS style systems, I've yet to see a single one of them show off a live print and its performance.
@ROCKETKNIGHT-ph7xp
4 ай бұрын
The company itself doesn’t even show it 🤦♂️🤣
@scarbowx6295
4 ай бұрын
They're not allowed to show that part of the printer yet, i dont know what is so suprising about it? Anycubic sends out these review printers and tells everyone to not show it, in the video you can clearly see Filament poop and the Multi-Color system is a replica of the A1, so use your imagination (and videos of Bambulab's A1) to know how it works.
@Bicloptic
4 ай бұрын
I find it hard to find REAL reviews on 3D printers in general. So many are basically commercials.
@stevrgrs
3 ай бұрын
It’s all clickbait trash :P
@bahtszbedevi8919
4 ай бұрын
Bro, i didn't see any multicolor printing experience in your video. Am I missed any part of video ?
@MyBrokenStuff
4 ай бұрын
6 minutes in he talks about it.
@Distanc3
4 ай бұрын
@@MyBrokenStuffoh the part where he plays B-roll of plugging in a USB and slicing the benchy, but no shots of the multi color printing 😂
@katzunkaimoto8889
4 ай бұрын
This is quite the upgrade from the Anycubic kobra 2, I thoroughly enjoy my kobra 2 pro
@pilarcomaposada9744
3 ай бұрын
Do you know if the purge tower could be replaced with a stl that does not care about the color and thus not throwing away so much filament?
@abovewongart
4 ай бұрын
This review is amazing. I love my Kobra 3 Combo.
@vd853
4 ай бұрын
I hope they make a shelf to put the AMS on top. Even if I need to print it out for myself. I will gladly replace my A1 Mini with it!
@talharoxen
12 күн бұрын
why
@shadowmosesmusic
4 ай бұрын
waiting to see if they will sell the printer in a 'max' stand-alone version.
@CrownedFigure
4 ай бұрын
Yeah I was wondering the name thing
@Kioto_Nakamura
4 ай бұрын
I was considering upgrading from my aging Anycubic i3 Mega to a Bamboolab A1 with AMS Light. However, I think I'll wait a few more months before making the switch.
@jordanvang9865
4 ай бұрын
get a bambu lab a1. I have one and it's amazing. I upgraded from a modded ender 3, and it's honestly amazing. I have zero regrets.
@Defyant123
4 ай бұрын
Brand loyalty LOL
@petercallison5765
3 ай бұрын
I repaired and tested an I3 Mega just recently and was impressed with the quality of the prints.
@Kioto_Nakamura
3 ай бұрын
@@petercallison5765 The print quality of modern printers hasn't necessarily improved, but there have been many quality of life changes: auto bed leveling, Wi-Fi file transfer, multicolor printing, better extruders for a wider variety of filaments, more sensors for error handling, and so on.
@AndrewAHayes
4 ай бұрын
"Cardboard spools and plastic spools with no issues" but then we see one of the cardboard spools has a big scar on the rim, of course I have no idea if this was caused by the unit, but what I do know is that when they are at that stage in the Bambu AMS it is not far away from problems. I thought they would have addressed containing the purge material rather than just pinging it off to wherever! I hope they calibrate the purge more accurately than the AMS, transitions from black and white are the only time you need a really conservative purge. I would like to see if the electronics have a fan to protect them from the filament drier heat and if there is one how quiet is it?
@RobertD_83
4 ай бұрын
But purging any other way than flinging it wherever would require them to have a little imagination and come up with something for themselves, and that honestly just sounds exhausting...
@acalavidyaraja
4 ай бұрын
Can't wait to see how elegoo is going to make a better and less expensive version.
@chadhowell1328
4 ай бұрын
I like the modifications they made to the “ACE” but the printer doesn’t seem much different than an A1. Having the multi material unit a dryer though is something I would love for my AMS to have so hopefully Bambu will add something like that to their next generation lineup when they come out with one.
@SentientTeapot2444
4 ай бұрын
Based on the ports and software, they might be working on an idex version, which would definitely bring some huge opportunities to the form factor.
@hyper-_-7
3 ай бұрын
please answer the question "This printer can print ABS and other abrasive materials when you don't want to print in color, that is, directly from the spool to the extruder without the ACE PRO. And if I enclose it, could it print ABS, polycarbonate, or nylon?"
@MrBaskins2010
4 ай бұрын
Anycubic has delayed showing this thing in action for a long time. Something sus is going on
@petercallison5765
3 ай бұрын
Creality is selling the K3 and nobody has seen it working.
@mrjoelpt
3 ай бұрын
I haven't seen any major 3D printer reviewers, its been almost a month, plus being open source means nothin with anycubic, my kobra (1) is open source yet use a proprietary hotend dimensions. Selling it and waiting for my A1 to arrive in the next week Edit: Won't ever buy or recommend anycubic, terrible experience just clones without major upgrades/ innovation and lack of reliability Better off with soval probably with that fully open source one inspired by voron (think sv08?)
@Dimitris1963
Ай бұрын
Is it possible that one of the two orange cables on the left side is a bit short in length so that when the Z height increases it stands a bit tight?
@fricken99
4 ай бұрын
An AMS and dryer is mad. I wonder if the AMS on this thing works with the bambulab one. They have the same plug so maybe?
@francescoscanu5513
4 ай бұрын
which version of anycubic slicer are you using? I tried to download it but on my PC it doesn't give me the choice of Kobra 3, I wanted to get the hang of it before the printer arrives
@billb921
4 ай бұрын
YES Please... More Slicer info... like setup, compatible with various brands 3mf files ????
@raetheon8897
4 ай бұрын
I concur.
@petercallison5765
3 ай бұрын
1.4.1 has just come out with K3 support.
@yvonnedicketmuller7760
3 ай бұрын
Hi have you tried to use the ACE with TPU? I am looking to print with the Recreus 82A filament and wonder if the ACE can handle the soft filament.
@drixom9805
2 ай бұрын
the ace can jam with you according to the reviews I looked at but it prints just fine from the spool holder.
@djihn13
3 ай бұрын
Auto resume doesn't work. I've lost power twice while printing and it never gave me the option to auto resume.... am I missing something?
@thatpspguy
4 ай бұрын
Making me want this so much more!!!
@UniDuni3d
4 ай бұрын
It's like, we have the same 90% features in almost all 3d printers. There's ONLY ONE FEATURE THATS NEW, and we want to see, but no, "Its a direct drive, bed slinger, bed size XXX, top speed XXX"... I don't know if Anycubic is sponsoring this video, but the only interesting part about the ACE is the benchy that showed that it can't notice if theres a failure in loading filament. Anyway...
@daledon69
4 ай бұрын
im torn because im in the market for a multicolor printer buts theres quite a number of multicolor units out and that a coming out this year so its gonna be hard to choose. Its gonna be a good year for multicolor printers.
@Foxfried
4 ай бұрын
Can't wait for Anycubic to discontinue this in 12 months like they do all their previous printers, should make a nice paper weight with no options on getting spare parts from any where.
@pilarcomaposada9744
4 ай бұрын
And for the purge tower, couldn't it be done taking advantage of a stl, so that we wouldn't care about the color and thus not have so much filament loss
@BaconGod.
3 ай бұрын
Is there a possibility of removing the kobra 2 head and installing this multi filament head?
@DavesChaoticBrain
4 ай бұрын
Hang on, are you saying you can ONLY print to it through either wifi, OR USB Stick? These things STILL don't allow just printing through a USB cable connected to the computer as a standard feature like regular printers do?
@tjhuntog
3 ай бұрын
no closed source system does. Yes its annoying and yes we hate it. Lets hope they open the source code.
@DavesChaoticBrain
3 ай бұрын
@tjhuntog I can do it with my Neptune 2 and Cura.
@tjhuntog
3 ай бұрын
@@DavesChaoticBrain Yeah fortunately Neptune 2 has open source code! Most new printers are coming with closed source which is quite annoying.
@mr.morales0707
4 ай бұрын
I Love the new anycubic Kobra 3 combo. I have the Kobe’s 2 neo. This will we a big update
@TS_Mind_Swept
4 ай бұрын
Just a shame that it doesn't seem to have the reduced waste color changing implemented..tho you did say it was a prototype, so hopefully they put that in as well
@nankai37
3 ай бұрын
Can you show how to change the filament? Thank you
@cdnbrit
3 ай бұрын
Was this written by ac?😊
@DavesChaoticBrain
4 ай бұрын
Does the faster 600mm/s allow for thinner layers? Would this printer be good for printing things like game minis or small items with tiny details?
@petercallison5765
3 ай бұрын
Resin printers are the best for minis.
@Safari95
3 ай бұрын
Never really talked about the poop disposal system and possible ways to manage that as well.
@willianbell3464
4 ай бұрын
Hello, ... I have a question, in several parts of the review you indicate that it is multi-material, does that mean that you can introduce flexible filament into the dryer? ...or does the flexible have to be fed outside the dryer and without the PTFE conduit? Thank you.
@doowaa2001
3 ай бұрын
I have one pre-ordered and I'm also trying to find this information I have emailed their after sales support but still waiting on answer
@willianbell3464
3 ай бұрын
@@doowaa2001 ok, thank you very much
@gabm.3475
3 ай бұрын
@@doowaa2001 did you get an answer?
@malachaskos
3 ай бұрын
Can print carbon filament like petg carbon or PA carbon?
@dwtlax
4 ай бұрын
Ok, just ordered one.
@joshuamns1
4 ай бұрын
i mean..its nice it doesnt have to retract as much for the AMS..but it SUCKS that theres 4 tubes going up to the hotend.
@mohammedmariff9034
4 ай бұрын
What is the gross weight of the kobra3 combo ? Printer with ace
@nateantle1587
4 ай бұрын
according to their website 13.8kg(9.2kg for the printer, 4.6kg for ace)
@CorrodedGalaxy
4 ай бұрын
Hey! Great video! I cant find out how to use anycubic slicer on my kobra 3. Theres no option to select it. Can you help?
@koneesha
4 ай бұрын
I don't think the Kobra 3s are out yet.
@petercallison5765
3 ай бұрын
It is on version 1.4.1
@CorrodedGalaxy
3 ай бұрын
@@petercallison5765 I got it thanks
@anthonylong5870
4 ай бұрын
With a coupon this printer is $419...With the ACE. Anyone buying the A1 over this at that price is just stupid
@iulianm16
4 ай бұрын
What coupon ?
@MrBaskins2010
4 ай бұрын
This is no video evidence of the ACE working so I would wait
@NeonDreams7
4 ай бұрын
Ok, Microcenter. I love yall but this was not the video to make to try and help this unit. As of 5/15/24, there are zero videos of these preview units making actual multi color prints. Just a lot of continued hype over the ACE saying it will and then doing lots of single color prints. I have a sinking suspicion that these early preview models either can’t do true multicolor. Either because it’s not finished and they were rushed out the door before Creality pushed out their K2 with multicolor. Or, Anycublic wing clipped these ACE units in the software until closer to the release date. I really want the ACE unit to work and bring competition to this market. But I’m feeling doubtful right now.
@sparkfire1223
4 ай бұрын
They better retro fit the kobra 2 max with the mmu
@VMTDesign
4 ай бұрын
A stick to flash the firmware and a head that fits.
@sparkfire1223
4 ай бұрын
@@VMTDesign Pretty much they should just make an upgrade kit with new head, the mmu and maybe push the firmware from their cloud server or flash drive.
@clockworkvanhellsing372
4 ай бұрын
Considering the 6 pin non usb connector and anycubics behavior diring the launch of the kobra 2 max (shipping amazon and ebay orders before the preordered products etc.) I'd heavily doubt that.
@BuzzingGoober
3 ай бұрын
Not going to happen. Stay in your lane brokey.
@rickh6963
4 ай бұрын
If it’s cloud only that is a hard no for me.
@jarrodlangford7692
4 ай бұрын
Ima wait because I got a couple p1s but I'd lie if I didn't say I wasn't curious.
@shludge
4 ай бұрын
The only think that sounds nice is the build ij filament dryer. Other than that its just a straight up A1 copy
@B0BBYGAMER
4 ай бұрын
Man I hope they make it open source the anycubic app sucks
@KX3DEX
4 ай бұрын
I like the random note of open sourcing this thing. Thats a major thing that would I think put this a step above. Though this video is terrible for literally showing us a 3D multicolor printer WITHOUT PRINTING IN MULTICOLOR. As others stated neither did the anycubic videos show a multicolor print in action. Its suspicious as hell.
@kennykobitsfpv
4 ай бұрын
Can the ams work with TPU?
@KolMan2000
4 ай бұрын
AMS units and anything that use a bowden tube (including a reverse bowden for a direct drive extruder) isn’t gonna be great for TPU because it has a tendency to stretch in the bowden and build up tension rather than feeding properly
@mariospanayiotou6644
4 ай бұрын
To anyone new to this, be careful not to fall for the advertised printing speed gimmick , the “ up to” printing speed is never what you can print at and not even close. The printer can reach those speeds and print but not decently. They say “can print up to X speed” but dont say it will be a decent quality. Every single company does this so look up reviews to find out the realistic speed you will be actually printing at if you care about speeds.
@petercallison5765
3 ай бұрын
They show maximum speed not average speed, the printers do reach those speeds but for only a fraction of the time. My Neptune 4 Max hits 500mms with good quality.
@umutkucuk7213
4 ай бұрын
Yeah rly Skillfull... With Multi Color Printer singel Color Prints ... xDDD
@Sauce787
4 ай бұрын
I need a direct comparison between this and the bambu Labs A1 Mini
@Arnos_3D
4 ай бұрын
Drucker soll für abs nylon usw sein. Ohne Einhausung sicherlich weniger.
@anonymouspanda8300
4 ай бұрын
Second yay
@ttran857
4 ай бұрын
Why tf do you have to remove some of the wires to change rhe nozzle? This is a stupid design
@delvincistudios
17 күн бұрын
DO NOT BUY THE KOBRA 3 combo. I’ve had nothing but problems and Ancubic customer support is a nightmare to deal with. They will try everything to keep your money and make a return as difficult as possible.
@mannysengineeringindustry1064
4 ай бұрын
another a1 clone disappointed by anycubic
@a.t7990
4 ай бұрын
They are ALL from China. What is your point?
@bisk1407
4 ай бұрын
How is this a a1 clone. Looks like any other bedslinger like ender3 or prusa
@Walvering.
4 ай бұрын
The a1 is a clone of a clone. 😢
@iserlohner_tastings7169
Ай бұрын
all Chinese copy each other 😆
@TigraZ
4 ай бұрын
do yourself a favor if you are going fdm printer just get a creality k1, or k2 save some time, neurones and money
@nahtanoj92
4 ай бұрын
This video is a waste of time, it doesn't show how it prints in multicolor, so what's the point?
@NoMercyFtw
4 ай бұрын
the only good thing about this printer is its open source supposedly
@JAYTHEGREAT355
4 ай бұрын
Wrote a code for ma ender 3 oro made my own ams
@eaman11
4 ай бұрын
That thing will never come close to print at 600mm/s. The bed looks bad, it sits only on one profile of alu in the center instead of having 2 large slits on the sides. This video is advertising.
@Toogo4
3 ай бұрын
What are you hiding, bad print quality, bad color printing. A color printer review you expect color printing!!!
@GabeTheGabriel
Ай бұрын
Huh? Do you have one? Mine works great! The only thing I can complain about is the software needs more features, but they are updating regularly
@Dave_the_Dave
4 ай бұрын
Looks like they copied the some of the best ideas from the A1, like the toolless hotend, and of course the AMS. Hopefully it works well. But I'm sticking with Bambulab.
@PSAGameplay
3 ай бұрын
An IDEX printer is better.
@petercallison5765
3 ай бұрын
For two colors for sure and particularly for soluble supports.
@RobertD_83
4 ай бұрын
600mm/s c'mon, how's aboot stop with the clones and blatant lies. The only way that thing is going to consistently run 600 mm/s is by putting it in your car or chunking it across the yard!
@jamesm3268
4 ай бұрын
Stop the blatant lies. This will not print "up to 600mmm/s" 😂😂😂😂 Absolute scammers.
@scarbowx6295
4 ай бұрын
That's what anycubic advertises so of course he will say it, maybe also based on the script that Anycubic gives to reviewers.
@Defyant123
4 ай бұрын
i get sick of this kind of click bait....
@beanbean321
4 ай бұрын
How can this be used in everyday life . Making toy elephants isnt productive .
@kokokaification
4 ай бұрын
you can use one water soluble material, one strong and rigid, one less strong but uv resistant and one elastic. so you can make cheap, strong part with some built in gasket with it. pretty awesome
@ThatoneNB12
Ай бұрын
That's kinda the problem in 3D printing. The only actual point of Multicolor printers is to make toys and trinkets. Especially since neither the Bambu AMS or the Anycubic ACE. Can actually do multi material reliably. On both of these TPU can get wrapped around in the rollers because of how floppy it is. And for ABS you can't print ABS+PLA on an open printer and you also can't print ABS+PLA on a closed printer because the PLA will deform.
@janemrebalssen3077
4 ай бұрын
it trash just a cheap clone
@madhatter5475
4 ай бұрын
Bamboo cost a lot. Anycubic cost less and give you a good product. What s the problem guys here in the comments below? 😂😂😂😂
@Defyant123
4 ай бұрын
Ask me the same question in 6 months.
@madhatter5475
4 ай бұрын
@@Defyant123 i ll do
@anguismemes1666
4 ай бұрын
My first printer is actually no lie a photon zero SLA printer from the trash and I'm amazed how well it prints and how robust it is
@Pinner1386
4 ай бұрын
Dunno what ppls issues are, I have Anycubics, including this one being reviewed on the way and they're great.
@ThatoneNB12
Ай бұрын
The problem is you won't have your hand held the whole setup.
@kristiyantodorov6310
4 ай бұрын
trash review
@gregoryamer
3 ай бұрын
Impressive!
@manpreetsingh46
4 ай бұрын
this is just an advertisement for the Anycubic. Ill wait for some respected reviewers
Пікірлер: 130