I had several requests to go more in depth with the cable chain mod installation, so here is a more complete look at everything you need to get it working correctly.
Original Mod Creator: www.thingiverse.com/thing:425...
Zip Ties that fit: amzn.to/3ICRYqq
Bolt Kit I used: amzn.to/3o0kYAN
Patreon Support: / jjshankles
I would recommend using the highest temp filament you print with. If you only ever use PLA, then you should be fine with printing everything with that, but I had some deformation in PLA parts when I was trying to print ABS with the bed set to 95C. I replaced the parts with PETG, and it was able to print all the ABS parts for a Voron build without any problems.
I like that this mod is several different parts, and you don't need all of them. I would highly recommend the Y axis chain since the stock strain relief is dangerous after a while. Then the X axis is my second favorite for the look it gives the printer. The two Z axis chains are totally optional, and I think the stock system works well for those. I do really like the look of all the colorful chains, and that was what convinced me to go ahead and install all the chains.
The gear I use:
3D Printer: amzn.to/3mpSBeZ
Favorite Teal Filament: amzn.to/3pHK9tv
Main Camera: amzn.to/2RNpEbV
Nifty 50 Lens: amzn.to/2Ls60ky
Sharpest Wide Lens: amzn.to/2XOj1v8
Telephoto Nikon Beast: amzn.to/2xqSUvz
Favorite Not RODE Mic: amzn.to/2C4W0se
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Atomos Ninja V Recorder: amzn.to/2FL03LO
Affordable Studio Light: amzn.to/2rzdAic
Drone: amzn.to/2EgitUT
Great Camera Bag: amzn.to/2UykJg1
💼 Business Inquires : goattoaster9@gmail.com
Chapters:
00:00 - Start
00:25 - Do you need this mod?
01:20 - Materials to use
02:35 - Downloading and Slicing
07:06 - Cleaning the prints
07:59 - Y-axis Chain
10:48 - Getting into the Case
13:47 - Left Z Chain
16:35 - Right Z Chain
18:26 - X Axis Chain
18:46 - Final Tips
19:55 - Any Questions?
Негізгі бет Ғылым және технология Anycubic Mega S Cable Chain Full Guide | Print This Next
Пікірлер: 41