Classic! Looking forward to seeing this build out! 👍
@fuzzdad2
11 ай бұрын
Tail skid = Probe....Everytime you said probe I giggled. Not because it's really a tail skid (used to fly helicopters) but because PROOOBE...
@seanerk5kt9
11 ай бұрын
Lol
@CarlosTorres-ow9qr
11 ай бұрын
Thanks for the tips tinted windows is hot
@tonygreenfield7820
11 ай бұрын
I have a pretty large collection of the MaK3000 kits. Actually started with the old Nitto SF3D range that was rebooted into the MaK3000 series. Presently building the Hasegawa Lunardiver Stingray which, unfortunately, was 1/35 not 1/20 but I guess it would have been too large and expensive to produce in the main 1/20 scale.
@ltgray2780
11 ай бұрын
Here in the US, I'm having a hard time finding decent pilot figures. Currently seeking 1/72 scale WWII RAF pilots. Any suggestions anyone? I'm new at this. Any advice would help.
@C.Brown5150
6 ай бұрын
It really sucks to have that much great detail put into a kit but you'll never see it.. It's disappointing to know that we're paying for a kit and 30% to 40% of it will never be seen again once it's closed up. 😥 Anyway , i have to say that you're doing a great job on your build.👍 Can't wait till the finish.
@GhostOnionHead
11 ай бұрын
This project has been on my list forever. I’m a giant Airwolf fan and own quite a bit of memorabilia. I have fond memories of building the old AMT kit as a kid as well. I even built one as a relief when I lost some pieces.
@MisterRedBlueBlur
2 ай бұрын
😁Same here. As a youngster, I was so excited that the AMT model kit was available here in Germany. Then, as an adult, I saw the more detailed Aoshima Airwolf and bought it some years ago. Still not build it.😁
@josephpantola1651
6 ай бұрын
Thank you for your great video. It inspired me to work on my Aoshima Aiwolf model kit.
@ViperAudioMPathRecordings
5 ай бұрын
Getting this very soon thanks for your amazing video 😊😊😊
@411maintainer
11 ай бұрын
I use oven cleaner to remove the plating, takes between 10-15 minutes
@utley
11 ай бұрын
I miss the Airwolf documentaries.
@CYPRUS008044
11 ай бұрын
This is so weird, im about two weeks into building mine from buying it out of the blue! looking forward to seeing what you do with this one :)
@haunguyen4742
9 ай бұрын
Can you tell me the length size of the helicopter fuselage?
@stevethefishdotnet
11 ай бұрын
Have you ever tried using Coca Cola to remove plated parts? It's gentler on the plastic. I never asked what the purpose of the clear body was for with this kit...
@seanerk5kt9
11 ай бұрын
Nope never heard of that. Someone said they use oven cleaner. The clear plastic body is absolutely useless other than using it as a paint mule…everyone I’ve seen build this always seems to wonder why it’s included.
@stevethefishdotnet
11 ай бұрын
@@seanerk5kt9 I know oven cleaner can be used to remove enamel paint, but I did not have luck with it when I tried it (LONG ago). The clear plastic seems too gimmicky. For space ships, it makes sense for lighting purposes, but not for a helicopter.
@swing.wing_singh
11 ай бұрын
Following along. I used to watch the series too as a kid. Infact there were even movies that came out later on. Loved the chopper. Back then i used to think its an Apache but didn't know much about choppers then. Now I feel they should have used the Apache 😅. That would have been way cooler. The base you made is excellent. Very ingenious. As far as I think, that exterior transparent shell that you mentioned, could be the protective bulletproof shield for the helicopter. I believe Airwolf was invincible to rocket and missiles and small arms coz I remember there was one episode where they show two Phantom jets (enemy) attacking the Airwolf with missiles but the missiles cannot penetrate the shield and Airwolf ends up shooting down the Phantoms. So IMO it could be the protective shield. Do let us know what it actually is, once you figure out yourself.
@nigelsmith7366
11 ай бұрын
I think the clear fuselage is for hand painting.... You paint it from the inside so you get a nice consistent gloss finish on the outside
@seanerk5kt9
11 ай бұрын
It’s not glossy in the outside. There are posts on the inside in which to glue the cockpit and stuff in that would show thru.
@ironspike171
11 ай бұрын
awwww.. i had so high hopes for you would do what you usually do: Choose the very old and bad AMT kit😂 Sean, having nice kits is below you standard! Anyways, great video and great taste in kits (Airwolf). Lesson learned today: Tint you windows to avoid model-like look. Thanks!
@russellstone9056
11 ай бұрын
Bro you are awesome.
@soonermodels1173
11 ай бұрын
This stuff I got from Dollar general called Awesome works awesome
@dougkuehl312
11 ай бұрын
Alaska has a lot of waffles.
@deeharris1908
11 ай бұрын
U waffle as much as u like, this is 1 model every1 over here across the pond is calling 2 be released as a partwork buildup model, another good show m8
@tonygary7611
11 ай бұрын
👍👍
@poppysrcandmodels
11 ай бұрын
Fantastic build! Have a wonderful and blessed day!! 👍😎👍
@scottysgarage4393
11 ай бұрын
I think the idea with the clear fuselage is you use one half, leave out half the interior and detail the other half. Not sure it's a good idea, but an idea, anyway...
@kevinkerlin5603
11 ай бұрын
I loved as child watching the Air Wolf🐺 show on t.v.
@ralphford4302
11 ай бұрын
great choice of kits, we all grew up watching Airfwolf
@steveshanks2537
11 ай бұрын
This is going to have to come out of my stash, I recall building a kit of some description as a kid in the 80’s and brush painting it…likely a right mess! Keen to see what colour this gets painted as I understood it’s not technically pure black? I think it was some obscure blackish colour by DuPont 🤷🏻♂️
Пікірлер: 36