Long overdue ! It's a budget gun not a cheap gun and very dependable and accurate plus it's a 🇺🇸 Smith & Wesson 🇺🇸 you can't go wrong. Great video and info 👍futuristic gun sd9ve nice.
@StevenOliverzeus
4 жыл бұрын
When I bought my SW9VE, I tried Glocks, M&P9, and Bereta. Cost wasn't the issue, I just wanted to have a High Capacity Mag. This fit the best in my hand, the Price was only a bonus.
@coreytowner9726
4 жыл бұрын
So they make one for the SW9VE the first model before the SD9VE?
@BOB-wx3fq
4 жыл бұрын
@@coreytowner9726 dude theres like a million Literally add a letter after sd9/sd40/sw9/sw357/sw40 and I guarantee it exists
This is the budget version of tge m&p9 what about this did you like better? The m&p 9 has a much nicer lighter trigger too.
@jayteefishing1543
2 жыл бұрын
I bought mine NIB never fired for 250 bucks with 2 mags and a molded IWB holster. Fantastic deal. I’ve had this pistol for about 4 years and I still carry it to this day on occasion. I’ve fired thousands of rounds through it and it’s never, not once malfunctioned. I’ve not done anything to the gun but a light and extended mag plate and custom rear plate. It’s underrated imo.
@sethh8892
Жыл бұрын
Lucky, I couldnt find one cheaper than 375. Got mine for 350, after I talked him down
@jayteefishing1543
Жыл бұрын
@@sethh8892 well this was 5 or 6 years ago. Now days if you can get it under 400 it’s a good deal. I’d pay 350 all day long. This is an extremely underrated pistol.
@sethh8892
Жыл бұрын
@@jayteefishing1543 yup, absoluetly
@kirkmcknight113
4 жыл бұрын
Dude I have one and it's the only one I have. I Love this pistol and I'm starting my upgrades as I speak. Keep up the good work and I will continue to watch. And all the haters can bite me, they made me to love mine more and I wouldn't buy a Glock now for nothing.
@bsrpython257
3 жыл бұрын
10:20 Opens the barrel package.
@cruise-zf9gt
3 жыл бұрын
he talks so much Jesus Christ
@tonyallen3138
4 жыл бұрын
Thanks for the review, and repeating what the website stated about the states the barrel isn’t currently available. After doing some searching it’s stated that installing a threaded barrel on a semi-auto pistol creates an illegal unregistered assault weapon. Thus, you’re not able to legally register it in the state of California. I can’t wait to leave this state, and go back to FL.
@pantherboydino3593
4 жыл бұрын
Just got this gun and was wondering if it was any good or not but after seeing what all that can be done to it kinda makes me like it now. Thanks for the content💯👍🏾 #firsttimeowner
@ryanyanez1255
4 жыл бұрын
cant wait to start upgrading my SD9VE.
@davidmilton6616
4 жыл бұрын
Love mine, About time they came out with a barrel. They sell a sight plate on eBay so you don’t have to machine cut your sd9 or 40 to add a sight.
@ricardomoyers5769
3 жыл бұрын
Can you please share more information on the sight plate.
@coachkane
4 жыл бұрын
Thanks man! I went w sd9ve super happy w it. Glock ppl can suck it😂
@earldelsanto
5 ай бұрын
Why do you feel you have to diss Glock? The sd9ve is a generational desentent of Gaston Glocks pistol design. Smith and Wesson payed bank to settle out of court on their copyright infringement. Any idiot can tell by just looking at it it's a direct rip off of the Glock. That all fine and dandy. I have many Glocks and I'm gonna buy a new sd9ve.
@trisharitter
4 жыл бұрын
My hubby just bought me one for my birthday Friday. It holds a very tight pattern, but it shoots low. For myself and my hubby. So just ordered new sights. Lazer/light next along with a new trigger.
@JettBlast
3 жыл бұрын
This model firearm has an 8 LBS trigger, This is a self-defense entry-level pistol. This also is the same size as a Glock 19 or Glock 23. For the price point, it is very difficult to find a better firearm.
@causaestmalleus4605
Жыл бұрын
I've had the sw9 for years now (its damn close to the same gun), and have thousands of rounds through mine. I'd bet my life on it any day of the week.
@FirstOdin420
4 жыл бұрын
I have a Glock and the SD9VE and I honestly can't tell the difference. They're both awesome pistols and reliable.
@earldelsanto
5 ай бұрын
That new smith and Wesson SD 9VE is really a cool looking handgun. As I said I had a sigma back in 1997 and I bought it because of it's super cool looks. Function I'm afraid was a botched abortion . For 299 every gunship in the area has them. I'm getting on and will load it up with all the goodies you have on yours. Should be a fun project .
@jaimepreciado8688
3 жыл бұрын
Awesome work Josh...Love what you have done to your SD9VE platform very impressive. Keep up the work.
@BrockNessMonster1991
4 жыл бұрын
Great video and sweet upgrade. Take a shot every time he says pistol 😉
@bobyblaccc30
4 жыл бұрын
Definitely gonna be upgrading our SD9VE.
@geraldhix2872
7 ай бұрын
My SD9VE has the barrel you're talking about. I've had much trouble with that barrel from Apex. It will jamb when firing. All the time. When I put the original barrel will fire flawlessly. I've tried comparing the Apex barrel with the original to see if there are very small differences. It just will not slide smoothly enough to eject the spent bullet. It's come down to sanding off the coating in order to get to a smooth barrel. I've already changed out the trigger with the Apex trigger and am pleased with the result.
@thejoshwileychannel
7 ай бұрын
That’s weird. I’ve never heard anyone have any issues with it. I haven’t had the first one either.
@x.adam1
Жыл бұрын
I bought mine for $200 used in like new condition. I saw one today at my local gun store also used great condition for $249 today in 2023.
@daveyeager9442
4 жыл бұрын
The threaded barrel is definitely on my wish list. I just added a light so I will have a holster custom made by my son.
@inDaStreetzGaming
4 жыл бұрын
You son makes custom holsters? How much.
@wetbred6677
3 жыл бұрын
I’m fairly certain that 9mm barrel will fit in the .40 simply because the cutouts in the slide allow it, it should work so long as the mags are interchangeable, I have a SD40VE
@GTduzIt
3 жыл бұрын
Im thinking the same thing... Did you ever try it out?
@dimensionalencounter3689
4 жыл бұрын
Was wondering when u were gonna make this vid, strike industries makes a comp for the Glock that doesn’t require changing guide rod springs and it has its own sight hole which would get you on target quicker. It will thread to the apex barrel and looks sick on the sd9ve.
@PaulA-ky6bv
4 жыл бұрын
Need pics
@Jdkfjfjjsjsj
4 жыл бұрын
They need to make one for the SD40 VE!
@BoricuaComeBacKid
3 жыл бұрын
GOOD STUFF BROTHA! Definitely want to upgrade my SD9 ASAP! And your good with the Vacation videos lol KEEP UP THE GOOD WORK! Very professional my man!! Need more info on that New Blck barrel! 💯💯
@briankeithwood
4 жыл бұрын
I sold my sd9ve and bought a 2.0 40c. Wish I had kept the sd9ve as well.
@mattchristiansen9807
2 жыл бұрын
I love the MP 40 2.0, super easy to shoot, accurate, and packs a hell of a punch when u hit ur target..! At least when u hit ur target with .40 u know that either A; they r gonna rethink their situation immediately or B, the target is down for the count unlike certain calibers that will remain nameless, 9mm...!
@williambird6548
Жыл бұрын
This just made the 9ve a must have pistol . people are buying this gun just so they can get the threaded barrel for it, thatz if they can find a barrel apex can't keep them in stock.
@MegaRunningTurtle
4 жыл бұрын
Pretty sure you do have the title of the coolest Sd9ve in th world 🤷🏻♂️ just saying lmfao
@trappedbanana7240
4 жыл бұрын
Im gunning for it right now i have every upgrade he does except no red dot but i have sapphire sights and looking for somone with 5th axis to do my milling for the slide..
@ryanscharadin
3 жыл бұрын
@@trappedbanana7240 if you haven't done it yet, look up NCEngravers to do the slide work
@jerseyjoseph2224
3 жыл бұрын
If someone wanted to send you their gun to customize, how much would you charge?
@shanet7986
4 жыл бұрын
You do have the coolest sd9ve in the world! Now how much for the gold barrel?? Lol
@xay1hunnidtv215
3 ай бұрын
Definitely the best SD9VE build
@bamadave1983
4 жыл бұрын
Pro mag part# smi A-20 is a 32rd for the sd9 ve cain arms also makes magazine extension that hold +5 but I was able to put 22rds in factory magazine promag also makes 25rd mag for the sd40
@earldelsanto
5 ай бұрын
I'm gonna get one of these guns to gussy up. Treaded barrel, trigger work,red dot high rise metal tritium sites. Don't want none of that crap on my Glocks or expensive guns. I had a smegma 25 years ago. The only good thing is it introduced me to Glocks.
@DannyWalker247
4 жыл бұрын
A $200 barrel for a $300 pistol? I did the springs on mine for $20 and that is all I want to spend upgrading a $300 pistol. I can live with the stock trigger. I would probably do a light or some type sights before that barrel. Good job on your videos Josh.
@shanmclendon9596
2 жыл бұрын
had mines for two years along with the 33 rd magazine pretty satisfied now to purchase this barrel
@Vasya253
5 ай бұрын
Did you ever buy it
@ryanscharadin
4 жыл бұрын
Caught my SD9VE on sale. Paid 205 out the door for it.
@petraarkanian7841
4 жыл бұрын
May I ask where?
@LiilTyweezy
3 жыл бұрын
@@petraarkanian7841 the streets for sure lol
@bocconom
3 жыл бұрын
I can't find one for less than $430.00 :/
@ryanscharadin
3 жыл бұрын
I got it at Academy Sports back in 2017.
@ryanscharadin
3 жыл бұрын
@@bocconom I got mine back in 2017 so the market was alot different. I don't think the SD9VE is with more than $320. Definitely wouldn't pay $430 when you could get a Canik for around the same price
@tortsize
2 жыл бұрын
I just bought a SD9VE and it’s great the only thing I don’t like is the trigger!
@nickdice2848
3 жыл бұрын
Just got the Smith and Wesson SD9VE recently as my first gun and now I've seen a few of your videos and now wanting to do some upgrades as well
@causaestmalleus4605
Жыл бұрын
The sw9ve was my first. Thousands of rounds through mine with no issues. I'd bet my life on it any day of the week.
@craigblackmon4579
2 жыл бұрын
I am not a 9mm fan at all but have a back up carry is a SCCY 9mm cause I like the size for carry but still wish it was a 40 cal. Not too fond of it cause it is a 9mm. They do not have much stopping power from experience with people.
@efremespinoza
3 жыл бұрын
Awesome channel and information is great!We support the channel all the way from Los Angeles!
@TrainFightWin
3 жыл бұрын
Cool looking SD9VE, I have a similar set up except the Apex threaded barrel.
@mattchristiansen9807
2 жыл бұрын
A silenced SD9VE would be bad ass, in fact I might consider doing that to my SD9VE... Actually, consider is the wrong choose of word, I'm definitely going to put a silencer on it.. It will cost a bit cause if u thought a threaded barrel was expensive try a silencer!
@mnuncio8793
4 жыл бұрын
I swear it’s about damn time
@mnuncio8793
4 жыл бұрын
Lone Wolf Silver Aluminum Magwell try it out
@tap5037
3 жыл бұрын
The SD9VE is almost an exact replica (functionaly) as a GLOCK 19. Only difference is the asstetics, extractor and 250.00. the SD9VE is a very reliable gun for the price.
@thesoundofsikscontrollerbe5624
3 жыл бұрын
Just got mine today!
@ricardomoyers5769
3 жыл бұрын
Where did you find a barrel. I’ve been checking Apex website for months and nothing.
@GTduzIt
3 жыл бұрын
The real question is if you can drop this in an sd40ve slide and frame.... I feel i have to call Mythbusters to figure this on out man 😂😂
@JettBlast
3 жыл бұрын
The standard factory 9mm does so I would think that it would.
@GTduzIt
3 жыл бұрын
@@JettBlast alright so i ended up getting an SW9VE barrel and trying this... Since i have the California Compliant version the barrel is cut differently for the loaded chamber indicator... It simply did not fit because of that section as far as i could tell. Maybe the CA compliant Sd9ve barrel would work but i have not found one for a good price and i kind of wasted money on this old (now) useless barrel lol... I dont think I'll try again anytime soon, im gonna go for a Glock 22 built with a 9mm conversion barrel
@JettBlast
3 жыл бұрын
@@GTduzIt So you have a standard S&W SD9VE barrel I am sure you can sell it to someone who has a standard S&W SD40VE with little problem.
@Flork
4 жыл бұрын
Glad you like it.
@ThanxBeToGod
4 жыл бұрын
< That's Scott Folk, one of the owners at APEX TACTICAL!
@sssabamagoo64
Жыл бұрын
Jus got a sd9ve Very helpful ! Thank you 💪🏽💯
@seanm7553
4 жыл бұрын
ITS AN AMERICAN GLOCK.
@mrpresident5186
3 жыл бұрын
No it's not lol
@roberthand1271
4 жыл бұрын
Great video been waiting for these to come out
@JeffBaylock
4 жыл бұрын
I love my SD9VE. I plan to upgrade the spring, because I use +p nato rounds. What do you suggest?
@donttreadonmining9146
4 жыл бұрын
I've had good luck with NDZ. Their guide rod allows for spring changes. Their 18# is working well for me. I don't run a lot of +p however. They have other spring rate options though. Good luck ✌️
@johnsmith-ic3wv
4 жыл бұрын
Finally they made an extended barrel for this gun.
@eljoven732
4 жыл бұрын
I'm so mad i can't find it for the 40 and will have to find a smith :'(
@trappedbanana7240
4 жыл бұрын
Apex doesn't offer the sd40 threaded extended barrel YET but i love it on my sd9 makes a WORLD of a difference in accuracy
@donttreadonmining9146
4 жыл бұрын
@@trappedbanana7240 You've seen good improvement in accuracy? I was curious about that.
@trappedbanana7240
4 жыл бұрын
@@donttreadonmining9146 very. I can shoot about 4 inch spread at 55-60 yards haven't tried anything passed that and eats 115 grain for breakfast.. stock barrel would have maybe 4 or 5 rounds even hit the paper at that range. Very well worth the investment.
@donttreadonmining9146
4 жыл бұрын
@@trappedbanana7240 Awesome. Thanks for the insight. Appreciate you taking the time to reply. 👍
@stevenhom7548
3 жыл бұрын
You can add on an 9 MM compensator to reduce the 9 MM recoil further
@mikeO31082
3 жыл бұрын
No idea why people shit on the SDVE. It's essentially an American made Glock for 1/2 the price by a company that's just a reputable and been around for a whole lot longer. And the amount of money some people drop into their Glocks, they really have no right to complain. Just wish there was more aftermarket support for the sdve platform. It basically takes a backseat to the M&P series.
@stevenhom7548
3 жыл бұрын
The only question is that this New Treaded Barrel Must be able to accept the standard 9 MM Threads to be able to screw on the 9 MM Pistol Compensator
@BrianJohnson-tz6xl
4 жыл бұрын
I wonder if that threaded barrel would fit in a sw9ve pistol ?? Almost all the other parts interchangeable, was just wondering if it would cause it would make my sw9ve even more different!
@mikemaierle4130
Жыл бұрын
It’s hard to believe a youtube content creator discussing real life and difficulties of content creating while living in the real world.
@marvinnguyen-colorado2018
4 жыл бұрын
Not just suppressor but a compensator to.
@learnshareevolve1842
Жыл бұрын
Thanks! For those of us who appreciate all the quality & features in this value-priced firearm, these are great options to have! Do you know if anyone makes custom kydex holsters for the SD9VE + light (Olight BALDR mini)?
@YungEpichael
3 жыл бұрын
Keep up the vids. I literally just got my sd9ve today, on my birthday!!🎂 keep it shorter though
@finnestsauce7655
3 жыл бұрын
I just got mine and job well done on this 👏
@zionadkins695
3 жыл бұрын
The apex barrel fit my Sd9 perfect, the only issue i had is it does NOT work with the 32 round pro mag. Every time i chamber a bullet it get stuck in the barrel. The standard mags work fine with this barrel
@mitchellmaytorena1137
3 жыл бұрын
Where can I find a compensator that will fit this threaded barrel on SD9VE?
@thejoshwileychannel
3 жыл бұрын
Any comp that has 1/2-28 thread
@richardaenriquez2122
3 жыл бұрын
Bad ass SD9VE. My edc is the SD9VE. I have wanted a threaded barrel since I got mine. As of 10/11/20 that barrel is out of stock
@thinkclear3834
3 жыл бұрын
I like that apex barrel . Looks sick . I wanna do that for my sd9vE
@chriscampbell7499
3 жыл бұрын
Your great I enjoy your video's and APEX .
@lonnieruff7559
2 жыл бұрын
Just got my barrel looks dope af for sd9ve
@Vasya253
5 ай бұрын
How do you like the barrel?
@joshualafradez2855
2 жыл бұрын
What kind of holster are you running with the light and threaded barrel just picked up my barrel now i am having a hard time finding the holster that fits it
@thejoshwileychannel
2 жыл бұрын
I did another video on this. Search Josh Wiley SD9VE holster
@Ocho474
7 ай бұрын
Shhhiiitt, CA ripped me off when I bought the SD40VE paying a whopping $540 after taxes and all other fees they added to it.
@DonMarlae
8 ай бұрын
Did they make A Compensator for Sd40 version? Or another Gun it goes for that can Be used on the Sd40 ?
@codyfriend2233
4 жыл бұрын
Where do I find more things to do to the Sd9ve I recently upgraded the trigger and trigger spring to the apex
@thejoshwileychannel
4 жыл бұрын
Check out the other videos on my channel
@donttreadonmining9146
4 жыл бұрын
NDZ Performance
@mikeO31082
3 жыл бұрын
Kind of torn on getting this. The black barrel really sets off the contract with the slide, but not sure if I would have to put suppressor height sights on with the threaded barrel. Suppressors aren't legal in my state. I'm also not a fan of the suppressor height sights available. Might send the stock barrel out to be DLC coated and then upgrade to the Trijicon HD XR sights.
@thejoshwileychannel
3 жыл бұрын
Check out the gun now. I’ve been doing a bunch of stuff to it.
@nobij122
4 жыл бұрын
Hey man thumbs up for me like the video like the gun I have one myself and it's funny because I have my gun already upgraded the way you have and I got the threaded barrel of course and it looks awesome in my opinion the gun is worth it I like taking it to the range and it shoots like a dream I want to do a little bit more upgrades to it
@yehyeh6962
4 жыл бұрын
Awesome, I need it in 40. Apex should recognize the non existent accessory market for SD VE 40,and 9 these guns have a huge loyal fan base that CRAVES cool after market shit. First people.to figure that out well make out very well.
@ericking1000
4 жыл бұрын
I love Apex I have the apex trigger kit and chamber indicator for both my SD40 and Shield 40. Hopefully they make a 40 option later on. Josh I do have a question... I was thinking about sanding then polishing the SD40VE etching on the slide to make it clean. Do you think it will mess up the coating of the slide if I do ?
@thejoshwileychannel
4 жыл бұрын
Probably
@mattchristiansen9807
2 жыл бұрын
If u do it, I would suggest a wet sand obviously and very fine grit to start with and then move forward from there, if u do proceed with ur question..! Worst case scenario u might be buying a new slide, lol!
@JettBlast
3 жыл бұрын
I think these are great and very good value! Here are some items that will upgrade your pistol, Truglo TG231MP Brite site then you can add the Streamlight TLR-6, 69293 that fits the Smith and Wesson M&P pistol fits the 40VE/9VE and works great. I have the Streamlight TLR-6 on many of my sidearms and hope to have one on all of them. This model has a Laser and 100 Lumen light and it not too bulky and very light I highly recommend them and Fobus makes a holster RBT17 that works with this sidearm with a light installed. the CAA Roni & MCKs are great. CAA is an awesome company they listen to their customers they make great items. I would recommend having 2 pistols one to install in a CAA MCK and one on your hip and have a "Perfect Pair"(sidearm and carbine/rifle in the same caliber and even better if they use the same magazine also!) They are great to have!
@GTduzIt
3 жыл бұрын
How is that mck treating that sd40?
@JettBlast
3 жыл бұрын
@@GTduzIt like a new firearm, having a light and the points of contact really makes accuracy amazing at handgun and carbine distances.
@JettBlast
3 жыл бұрын
@@GTduzIt kzitem.info/news/bejne/p6iEyIltiIKAaZw
@GTduzIt
3 жыл бұрын
Nice, i see they have a clear version... Turns the 40 pistol into a 40 carbine.... I may prefer this config if the 9mm barrel swap isnt working out.
@JettBlast
3 жыл бұрын
@@GTduzIt I would recommend both, picked up a Smith and Wesson brand new factory Barrel on eBay for $40.00 + Tax! just be patient and do some research on CDNN and other firearms parts webpages in including eBay they do have deals if you look deep enough.
@brianpytleski5512
3 жыл бұрын
I love my SD9VE. First pistol I bought when I got my CPL. I love shooting at range. Shoots ANY ammo u want eithout fail. I've a couple thousand rounds.. Never jammed once. ALWAYS fires. Yes, the trigger blows but nbd to me. I also own a TCP 738 pocket pistol. It's a great gun except for 1 thing...it jams all the time. Doesn't matter what ammo I shoot. It's completely unreliable. No real point to carrying a gun that SOMETIMES fires.
@Joseph-gi9fw
2 жыл бұрын
Great video sir. I have a sd40e with hg62 laser. Best upgrade I’ve done by far. Having trouble finding a holster that will fit. Any recommendations you have I will really appreciate it.
@thejoshwileychannel
2 жыл бұрын
I did a video on it. Look at the SD9VE playlist
@mattchristiansen9807
2 жыл бұрын
I cant recall what its called now that I'm writing but its leg holster, military style but it literally folds around ur gun and then velcro to secure it to where u like! I just ordered one myself so I'll let u know how it works out with my SD9VE!
@oscarpatriciagomez9081
4 жыл бұрын
excellent video, thanks
@Y-F-F-1
8 ай бұрын
The rent-a-cop special
@donttreadonmining9146
4 жыл бұрын
Thanks for the vid, brother! So, I have to ask.....what do you think of the barrel now? Accurate? Good lockup? Just overall, your thoughts after owning it awhile. ✌️
@craigblackmon4579
2 жыл бұрын
I have an SD VE S&W 40 I would like the threaded Barrel would be nice, I love love love my 40 so a lot so would be cool for an upgrade like that.
@carjor418
3 жыл бұрын
just went to Apex. sdve barrel is blocked out to click on
@jenniferflores6307
8 ай бұрын
Update: "Both sides of the isle" has officially been used up for the the remainder of 2023 and the entire year of 2024, anyone caught using this worn out phrase will be hit with a fine. You can thank the creator of this video for that.
@acester86
4 жыл бұрын
The one thing I hate about my SD9VE is the cheap laser etching on the side...
@2002mattgray
3 жыл бұрын
Hey man I love your videos on your sd9ve pistol because its alot of help on upgrades for mine. What exactly do I need to ask for to get my slide modified with the open port that you added to yours to help reduce heat? Also what do I need to ask for to add mounting capability for a red dot sight like you added to yours? Thanks for all the help man
@causaestmalleus4605
Жыл бұрын
Both of those are machined. If you don't have access to milling equipment, talk to a machine shop or a gunsmith and they can point you in the right direction.
@bamadave1983
4 жыл бұрын
How is the accuracy of the new barrel?
@jonathanmercado4514
4 жыл бұрын
Good question! He should a video of it
@scottfamily9826
4 жыл бұрын
Bama Dave his gun don’t shoot just for show lol
@bamadave1983
4 жыл бұрын
@@scottfamily9826 yeah accuracy is effected by all different things including the barrel I dont want something to look pretty it need s to function Ethier as good or better than factory the barrel is worth shit if dont shoot straight past 10ft
@melvinmathis783
23 күн бұрын
How much is the threaded barrel
@spyder0505
3 жыл бұрын
Are we not gonna talk about the assault weapon. Really!!! Who leaves twisted tea out in the open for anyone to get their hands on. 🤣🤣🤣
@drewsmith8101
3 жыл бұрын
I found a S&W m&p 9mm threaded barrel for cheap, do you think it work with my sd9ve?? Im reading online it fits in the slide, but nobodys mentioned firing it. What do you think? Just curious of everyones opinion
@mattchristiansen9807
2 жыл бұрын
As long as the threaded barrel fits in ur slide, firing shouldn't be an issue. The bullet passes through the barrel not the slide, u should be fine
@emerygroves9717
3 жыл бұрын
Hay bud would u do slide cut out for a customer
@zsetnik18
3 ай бұрын
Can i screw a 16 in barrel on this? Apex makes one
@creed55
4 жыл бұрын
I paid 300 for my SD9 and 300 for my SD40VE. (My SD9 was 425 total because it had a crimson trace laser on it....i figure its 300 without the laser)
@lostinwisconsin4802
4 жыл бұрын
I have a SW9VE have had it for years paid 250. for it love it great pistol. Ill bet that barrel will work in it with some help, or maybe with no help ????
@davidmoses7202
4 жыл бұрын
Do you know anyone who's tried to put the sd9ve threaded Barrel in the sw9ve if so would you let me know.
@stevenibarra4237
3 жыл бұрын
Bro, I just order my Apex barrel and a upgraded trigger as well; for my SD9.by the way your gun looks great 💯 quick question!? Where do you purchased the red dot sight and the flashlight if you can drop the name of it. Thanks 🤙🏽
@mattchristiansen9807
2 жыл бұрын
Check out Crisis Gear!
@michaelmorgan3134
3 жыл бұрын
I would love it if they make a Sd40ve treaded barrel
@anthonyflores3540
Жыл бұрын
I think that barrel would fit a sd40ve
@billyclark7341
2 жыл бұрын
I love my sd9ve
@Big-Purv
4 жыл бұрын
In the middle of deciding whether i want to dump some money into the sd9ve to make it trick and perform better, or just sell and go for something a little more expensive, its my first handgun and i like it but i also dont have much to compare it to. Of the 3 others i shot, a mp shield 2.0 9mm and a watlher 9mm mine would be 3rd on that list at the moment. Lol
@mattchristiansen9807
2 жыл бұрын
I think u should just keep the SD9VE but still get another handgun. I also have a MP .40 2.0 that I absolutely love and wouldnt give or trade for anything in this world! But I also wanted to get a piece that the ammo was cheaper and better availability hence the SD9VE and its a Smith and Wesson, love their reliability and they have been around for quite sometime so they make a quality gun and priced for the average american that lives pay check to pay check, lol!
@maddmny2187
4 жыл бұрын
Order mines literally 3 days ago 😂
@theknightswhosayyeet5185
2 жыл бұрын
Is that barrel more accurate than the stock, it being a different twist in all, dose it make a difference ?
@silentfox8
3 жыл бұрын
i love my 9ve, these guns are so similar to glocks that glock took out a lawsuit, theyre practically identical internally, ive shot both, i love both, and i just "pulled the trigger" on this barrel for mine (pun definitely intended) i plan on fluting it
Пікірлер: 277