Thanks again Peter for another awesome video! I know how hard it is having to pay for everything without sponsorship. I really appreciate and I'm sure the most of us watching also appreciate the time and effort did you put in the videos. It really shows. Please keep up the good work.
@toolbox-gua
4 жыл бұрын
No matter if simple or complex, always worth watching to learn.
@curtisvonepp4335
4 жыл бұрын
Way way back then i run a Giddings & Louis 72" boreing mill and my girlfriend brought me dinner and no body was looking i danced with her on the face of the Chuck those were the days .😁
@dan3076
4 жыл бұрын
The channel for REAL machinists
@bigass197
4 жыл бұрын
I am a fake machinist and I'll have you know I greatly enjoy this channel ;p
@marouanebenderradji137
4 жыл бұрын
@@bigass197 what do you mean by fake machinist
@bigass197
4 жыл бұрын
@@marouanebenderradji137 I'm just joking bud :)
@lynnelanguedoc4049
3 жыл бұрын
Amen 🙏🏻 Tony from Canada 🇨🇦
@michaelpiotrowicz6100
4 жыл бұрын
Thank you for making videos of the parts you make. I am entirely impressed by the skill and thought you bring to your work.
@SirRootes
4 жыл бұрын
A real CNC master! You know what you are doing , mate/yoda!
@lynnelanguedoc4049
3 жыл бұрын
A master machinist 👍That he is Tony from Canada 🇨🇦
@extradimension7356
4 жыл бұрын
@Edge Precision LOVE the new photography inside the machine with the new arm and base. Great wide angle shots inside the machine , again like you are really there... Of course watching that plastic tube get caught in the long stringy chips and have the camera do several barrel rolls around that massive drill is priceless ! Stunt-cam Awesome !
@rickhaass1133
4 жыл бұрын
Great as usual - many thanks for taking the time to educate us, sir.
@wesley1045
3 жыл бұрын
Your pieces are very good .. Congratulations on your beautiful work. Machining, I am a Turner in a company here in Brazil .. Your work is very good .. Keep it up ...
@NH3rrm4nn
4 жыл бұрын
Just wanted to say thanks again. You sir are a wealth of knowledge, years of experience. Sharing is accelerating my learning. Decades gobbled up in hours.. Thanks
@TrPrecisionMachining
4 жыл бұрын
cada vez me gustan mas tu canal y tu nivel profesional es altisimo..gracias por compartir tu conocimiento..un saludo
@EdgePrecision
4 жыл бұрын
Tr Precision Machining gracias lo aprecio.
@GRTLRS
4 жыл бұрын
Wasn't aware you could rent gages. I imagine that gage would be quite expensive to buy, so I suppose it makes sense for jobs like this you might not do too often. Neat.Thanks for sharing.
@theessexhunter1305
4 жыл бұрын
I saw the rental sticker so saves a double post lol
@mannycalavera121
4 жыл бұрын
I didn't know this either, good idea really.
@TrueMachine2
4 жыл бұрын
Liked your idea to back those opposite jaws a little! Good tip!!
@brownmilligan1936
4 жыл бұрын
i wish i could do that, but i love to watch. thanks for your time.
@brucemcpherson8832
4 жыл бұрын
Nice job. If you don't do a lot of API threads, then renting ring and plug gauges is probably the best way to go. if you do a lot of API threads in a wide variety of sizes, then MRP gauges work out a lot cheaper
@EdgePrecision
4 жыл бұрын
My customer supplied this gauge. I assume they rented it.
@ROBRENZ
4 жыл бұрын
Great stuff Peter, enjoyed! ATB, Robin
@starlyabadillo6529
4 жыл бұрын
Thanks for the video keep them coming always enjoy seeing your videos>
@bostedtap8399
4 жыл бұрын
Excellent, very interesting on the effective pitch on a taper, ref relationship on OD to axial engagement. Thanks for sharing.
@jellyfishbones0
4 жыл бұрын
I actually really enjoyed seeing the camera crash. Its so much cheaper to learn from other peoples mishaps and mistakes than to make them yourself.
@63256325N
4 жыл бұрын
Very cool! Thanks for the video.
@summerforever6736
2 жыл бұрын
Fantastic work!
@robertacevedo449
4 жыл бұрын
Great work.you are an artist
@youcoulduseit7492
4 жыл бұрын
Cool to have a print like that to look at in pt 1 then see you machine it in pt 2.Thank god for that thread gauge looks like the go pro survived, must be a good case. another great show good to see you doing well
@dean1841
4 жыл бұрын
You are a legend!
@capnthepeafarmer
4 жыл бұрын
Looks like you're getting fancy with the editing and camera angles, nice!
@DonStinger
4 жыл бұрын
Great video series Peter. I really like the CAD-model overlay in the previous video. It seems to me that allmost all insert tipped drills produce that really awful high pitch squeal. Do you have an idea why that is?
@hawkprecision7878
4 жыл бұрын
Great videos Peter. Interesting to see the variety of work you put through that Mazak. Looks a versatile machine. Have you had many jobs that have required a majority of the Z Travel to machine? Thanks, Daniel
@bcbloc02
4 жыл бұрын
Nice little lot of parts. Taking that from a solid bar to finished part what does it loose in chips about what the part weighs?
@EdgePrecision
4 жыл бұрын
According to the cad software. Stock started at 58 Lbs and finished part is around 17 lbs.
@RRINTHESHOP
4 жыл бұрын
Nice parts, fun to watch.
@EdgePrecision
4 жыл бұрын
Thanks Randy!
@theessexhunter1305
4 жыл бұрын
Very nice work Peter, guessing oil industry pipeline fitting ?
@hullygully-3599
4 жыл бұрын
Are you using a torque wrench for tightening the chuck Peter? It’s amazing to me how little sometimes you use to hold onto. Is there no issue these days with scroll damage / jaw breakage on these larger chucks? is it common to use a cheater bar be used on the chuck key. ? ( something we were all taught not to do - but all larger chuck keys I see are bent this way)
@EdgePrecision
4 жыл бұрын
It’s a 3/4” drive ratchet wrench. This is a independent 4jaw chuck. No scroll. I can pretty much tighten these jaws as tight as I can get them. So far it hasn’t damaged the chuck.
@stonecraft745
4 жыл бұрын
Thanks for sharing!
@johnmav8309
4 жыл бұрын
Very good!
@user-gi5bd2jh3z
4 жыл бұрын
Уникальные детальки... Допуски вообще жесть...
@bigsmoke6189
3 жыл бұрын
Was the stock diameter too big to fit through the spindle so you could machine parts from bar stock?
@EdgePrecision
3 жыл бұрын
No the material was supplied to me cut in these lengths.
@carloscarrizo2131
4 жыл бұрын
You are awesome man. keep up the good work and put the camara in a safe place next time tha was funny. :)
@jakesmachinery8195
4 жыл бұрын
Peter, is the surface speed too high on the big drill? I hear it squealing while it cuts. I don't have any machine tool rigid or powerful enough to use one of those, so I wouldn't know what their characteristics are.
@EdgePrecision
4 жыл бұрын
No that’s just the way this drill sounds. It’s normal.
@jakesmachinery8195
4 жыл бұрын
@@EdgePrecision Thanks for letting me know!
@prasanthek5182
4 жыл бұрын
Coolant pressure is marvellous
@billdlv
4 жыл бұрын
Nice work Peter. Your camera case you made sure is rugged.
@tehsimo
4 жыл бұрын
What is the purpose of a tapered type thread like this? It seems it wouldn't really grip until its fully snugged up
@EdgePrecision
4 жыл бұрын
They use this thread in the oilfield because it can be made up quickly and also it can tolerate a lot of crud in the threads. Like for instance the drilling mud. The thread actually makes up in the shoulder face. That's the reason for the standoff gauge.
@paulmace7910
4 жыл бұрын
How do you check the thread profile other than the thread gage? I would imagine the API has some tight specs on profiles.
@EdgePrecision
4 жыл бұрын
I didn't show this but I also check the threads depth with a Allen Gauges thread depth gauge #102. Other than that if the insert is good the profile will also be good.
@bassgeorge1234
4 жыл бұрын
On your mazak can you rotate the chuck by hand? It seems that you always rotate the chuck form CN.
@EdgePrecision
4 жыл бұрын
Yes but it than makes it hard to tighten the jaws with the wrench because there is nothing restricting the spindles rotation. It is better to have the C axis coupled and jog it with the hand wheel.
@gusmcgussy3299
4 жыл бұрын
Not only renting... But calibrating that Gage yearly as well .... $$$
@pedub2222
4 жыл бұрын
Is that a tool probe I see? the one that came with the machine? if it is, how come you don't use it? thanks for all the great videos
@EdgePrecision
4 жыл бұрын
Because it’s so high up it’s difficult to use. It’s easer and faster to touch them off on the part. Also I tried it the other day and it didn’t work. I will have to see if I can find the problem. When I get time.
@pedub2222
4 жыл бұрын
I knew there was a reason, say what's the G50 rpm clamp on this part? not holding on to much, you got big gonads my friend , thanks again for the great videos
@alfredopaez9097
4 жыл бұрын
👍👍👍👍👍❤️❤️❤️❤️❤️
@James-fs4rn
4 жыл бұрын
👍thanks
@carloscarrizo2131
4 жыл бұрын
Hey Peter, question is it better to drill and rough the ID first, then rough the OD. Then finish the ID then finish the OD.? Or it doesn't matter. I really appreciate if you answer. Thanks.
@NH3rrm4nn
4 жыл бұрын
I'm an ignoramus so don't mind me, but it seems like you're asking about order of operations? In my limited experience, you're talking about tool changes. You're going to get the same result, the diff is time. Are you manually changing? Do you have to pause between operations to hold tolerance? In my tiny shop we don't deal with the kinds of tolerances he does. So minimizing tool change time is priority. When you're aiming for these tolerances, stopping to bust out the micrometer, time isn't the issue..
@carloscarrizo2131
4 жыл бұрын
@@NH3rrm4nn, yes I'm talking about the ability to achieve tight tolerance ID but also OD, does the order of operation matter, I always thinking in the material "stress relief", and no, there is no manually changing tool. Thanks.
@mehmettemel8725
4 жыл бұрын
@@carloscarrizo2131 I personally drill first rough OD then rough and finish ID and finish OD last.I don't think it matters which you finish last as long as roughing is done all around.Sometimes depends on tool positions on turret and what next operation is.I'm no cnc expert like Peter so everyone may have their own ways.
@jero37
4 жыл бұрын
What is the make of that Ratchet with the built in cheater bar!?
@EdgePrecision
4 жыл бұрын
I bought it from Northern Tool. It has Titan written on it. I’m not at the shop or I would look if there is a number.
@RambozoClown
4 жыл бұрын
I had to get some of those, too, after seeing Peter use them. You can search "extendable ratchet" on Amazon for a bunch. I got a couple at Harbor Freight, that are working great. One is 1/2" and the other has 3/8 on one side and 1/4 on the other. I love that style as I can have two sockets fitted for quick access.
@dustinwalden7091
4 жыл бұрын
Is that tool cabinet just the one they have at sams?
@EdgePrecision
4 жыл бұрын
Yes.
@dustinwalden7091
4 жыл бұрын
Edge Precision seems to serve its purpose well
@HowlofWind
4 жыл бұрын
What's best for drilling, rotation of piece or drill? What's the difference?
@EdgePrecision
4 жыл бұрын
The only way I can answer that is it depends. In the case of this machine the milling spindle has a lot of power and also high rpm. So I can do most of my drilling with it. The turning spindle has more power (Torque) but only a maximum speed of 1600 rpm in high and 460 in low range. So of course if I need more than 1600 rpm the milling spindle is the only way to go. So it depends on your machine. But in general either way works but drilling with the turning spindle is limited to center line its of rotation. There are alignment issues with drilling with the drill stationary. One advantage is you can better control the size of the hole when using a insert type of drill by running it off center. But you must align the inserts parallel to the X axis. The best way to drill a hole concentric to the rotation is to rotate both the work and the drill. This overcomes the influence of gravity in the horizontal orientation of a lathe on very deep holes. (Some machines wont let you do this). But in the case of this machine, I just always drill with the milling spindle unless the drill is very large. Say bigger than this drill. Than I would use the turning spindle.
@DavidtheSwarfer
4 жыл бұрын
awesome stuff Peter. I have this idea for the camera/coolant issue. your blower slot works well once the stuff is on the lens cover but when the coolant load is heavy it fails. how about fitting an extra blower slot spaced away from the body by say 1/4" or 1/2". The idea is to blow the coolant away before it gets to the lens cover. Then the existing blower slot will have less work to do. This extra slot may need more airflow though so you would need an extra regulator for it.
@EdgePrecision
4 жыл бұрын
Thanks David. The thing is there is no way air at 100 Psi air is going to overcome coolant at 1500 Psi. It just isn't going to happen. I don't think there is any way to get clear video in those conditions. Also there is the fog in the air that is generated.
@DavidtheSwarfer
4 жыл бұрын
@@EdgePrecision ok, guess I was hoping that a thin slot would generate high enough airspeed to blow at least some of the coolant away before it hits the lens window. ah well...
@jaguar36
4 жыл бұрын
How long does it take to run the part?
@EdgePrecision
4 жыл бұрын
The cycle time is about a hour.
@Toolman22364
4 жыл бұрын
I use OneCNC for both my Haas machines . Are you familiar with it . I am no pro but it is pretty nice . Awesome video Sir
@EdgePrecision
4 жыл бұрын
No I have never used it.
@xD12xSiCkNaStY
4 жыл бұрын
At least you remembered to remove the ring gage before re-running the thread. Its amazing how many I have seen get wrecked by slamming a tool into it. Is that Mazak programmed with G code instead of mazatrol? 9:18
@EdgePrecision
4 жыл бұрын
I very seldom use Mazatrol. Most all the machine work I do is in G code (eia on the mazatrol). Programmed on the computer in the cam software. I had a machinist leave a $750.00 ID mic in a bore and restart the machine. This ruined the mic ruined the boring bar and knocked the machine out of alignment.
@xD12xSiCkNaStY
4 жыл бұрын
@@EdgePrecision I see. I have worked with a QT250 lathe and a FH6800 horizontal (both are early 2000's) and have never seen any actual code. There all conversational programming. I thought it was cool this machine actually had code you could see.
@radoslawjocz2976
4 жыл бұрын
Hi, in order to have more clearance when turning near the jaws you can set tool on 45 degrees B axis, but this only apply for turning. Also you need a tool with correct geometry for such setup.
@EdgePrecision
4 жыл бұрын
Thanks already have one.
@PillowFlute
4 жыл бұрын
@@EdgePrecision love the content, what's the name of the drill you're using on this part? The big one
@ehamster
4 жыл бұрын
Those pieces of stock look like a back injury waiting to happen. Too big to pick up manually, but too small to use a hoist/lift. (Spoken as someone who slipped a disc a few weeks ago, lifting something like that)
@joshua43214
4 жыл бұрын
I was thinking the same thing.
@ipanzerschrecku4732
2 жыл бұрын
Looks like the male end for a string of drill pipes.
@tomazbeg1999
4 жыл бұрын
Tenx
@PaulSteMarie
4 жыл бұрын
Slightly off-topic: Is that a ratchet with a built-in cheater handle that you're using on the chuck? Who made it?
@EdgePrecision
4 жыл бұрын
I bought it a Northern Tool. The only thing it says on it is Titan CR-V. Its a 3/4" drive wrench.
@tehsimo
4 жыл бұрын
what was the funky noise at 2:15
@EdgePrecision
4 жыл бұрын
I listened to it and I'm not completely sure. I might be something around me. That day I filmed this they were moving machines in and out of the shop. In other words there was a lot of activity going on. It just coincidentally was at the same time I jogged the machine.
@jonathonfriedl1766
4 жыл бұрын
I just wanna know how you find time to make videos and hit your production goals. Nice work!
@EdgePrecision
4 жыл бұрын
It is difficult. Thanks!
@RobertSmith-os2zj
4 жыл бұрын
How does Fusion work with Intergrex ? We want to move away from using EdgeCam .
@EdgePrecision
4 жыл бұрын
I programmed this with Esprit. I haven’t used Fusion for the Integrex yet. I have used it for my Haas in the garage it works fine for that.
@RobertSmith-os2zj
4 жыл бұрын
Edge Precision thank you.
@OMY005
4 жыл бұрын
Why do you want to move away from Edge Cam? Is fusion better?
@metalmogul4691
4 жыл бұрын
Ya good. The technology you are running with the integrex is space age. It still needs someone that knows what to tell it. Machinists are the ones.
@miperrosellamaleo
4 жыл бұрын
Hello Peter, which material is? Thanks from Spain
@EdgePrecision
4 жыл бұрын
I did this quite a while ago and I don't exactly remember. I'm going to say P550 stainless or 17-4 one of the two.
@miperrosellamaleo
4 жыл бұрын
@@EdgePrecision it seems too hard. You always program with cadcam or with mazatrol too?
@EdgePrecision
4 жыл бұрын
@@miperrosellamaleo I always use Cam software. The only thing I ever use Mazatrol on this machine is to bore chuck jaws.
@jayhunsberger1546
4 жыл бұрын
I spy that MDS power supply on your bench. Decide to keep it and have someone repair it?
@EdgePrecision
4 жыл бұрын
No I just haven’t got around to sending it back yet.
@prasanthek5182
4 жыл бұрын
M also doing mazak intregrex e tower hydraulic chuck bro .
@Jay9999
4 жыл бұрын
Peter the Great
@CAD_CAM_TRAINING
4 жыл бұрын
I would SO love to work with you ...
@alirezabehnodfar672
4 жыл бұрын
👍Why don't you use Hydraulic chuck instead ?
@EdgePrecision
4 жыл бұрын
The first big job I did on this machine required this chuck to get the full spindle bore. After using it I found I like it better. A manual chuck doesn't require a draw tube that reduces the spindle bore. Also the hydraulic chuck that came with the machine is 21" in diameter this causes tool interference problems (I describe this in the API threaded part 1 video). This manual 4-jaw chuck is 16" in diameter gives me better tool clearance. It also because of the greater travel range of the jaws gives me better versatility in the work holding than I can do, over a hydraulic chuck. So for the type of work I do I prefer this manual 4-jaw chuck. But for a job like this a hydraulic chuck would be better. But for only 11 parts I'm not going to the trouble of mounting it. The time saved in chucking would not be offset by the time it takes to remove the 4-jaw, clean out the spindle and the threads for the draw tube. Than mount the draw tube and than the chuck. That would take at least a couple of hours. Also the draw tube threads got damaged by someone when they shipped the machine to me. That would also require a repair witch I have never done yet.
@hyperform9196
4 жыл бұрын
Why do not you use a hydraulic chuck?
@EdgePrecision
4 жыл бұрын
I have answered this question many times. But the short answer is most of the jobs I do chucking is not a major time compared to the machining operation. So I prefer the versatility that the 4-Jaw manual chuck gives over the Hydraulic 3-Jaw chuck.
@mayraelenabustamante5616
Жыл бұрын
También hago esas roscas para NOV. Haz videos suptitulados para castellanos
@EdgePrecision
Жыл бұрын
Eso es más una cosa de Google/KZitem. No puse subtítulos en el video. Son generados automáticamente. ¡Gracias!
@abramfriesen9834
25 күн бұрын
Like to know the name of your lathe and model number sure like to have one
@EdgePrecision
25 күн бұрын
This machine is a Mazak Integrex e650H.
@prasanthek1685
3 жыл бұрын
What are the API threads connections.
@EdgePrecision
3 жыл бұрын
API stands for American petroleum institute. In this case it's tapered thread typically used in drilling pipe connections. But there are many other threads types that fall under the API spec.
@prasanthek5182
4 жыл бұрын
How mutch API stand off.nd tpf
@EdgePrecision
4 жыл бұрын
Watch the first video. I enplane everything about the thread.
@paddyboy1959
4 жыл бұрын
Why don't you use Mazatrol?
@EdgePrecision
4 жыл бұрын
I just prefer to use Cam to program with. Nothing wrong with Mazatrol its just my personal preference.
@jimsvideos7201
4 жыл бұрын
Now you probably *shouldn't* but you could screw the gage on, spin it's OD true, chuck that and use it to work the other ends.
@peterfitzpatrick7032
2 жыл бұрын
No thanks !! 😱😂
@vijeshputhiyaparambathpp5100
4 жыл бұрын
Saftey gloves are not using.
@EdgePrecision
4 жыл бұрын
Do you mean I'm not using gloves? I never use gloves around a machine. I personally think that in unsafe.
@SealsRacingConcepts
4 жыл бұрын
Machining begins @ 7:50
@lukeissobad
4 жыл бұрын
first! lol
@thedave7760
4 жыл бұрын
You do realise there isn't a prize don't you? I know because I have won this contest a few times myself, quite disappointing.
Пікірлер: 139