Can you please make a video on how to use the ILS instrument for runway path approach?
@Seezor
11 жыл бұрын
You have no idea how much I needed this. Your voice sounds like a friend of mine and your instructional timing is great. Actually better than when I was in ATC school in the Navy. Thank you for posting this. Moving to your next lesson.
@pettcaanderson3150
Жыл бұрын
excellent
@Baste_OfficialYT
Ай бұрын
Where can I find the landing altitude for Boeing 737
@aviatortrucker6285
Жыл бұрын
Does remain within 10nm refer to the FAF, the runway or the airport?
@Klaviation
11 жыл бұрын
Thanks for the feedback! More great content is available on the website
@alpenglow1235
3 жыл бұрын
Why is the WAAS Channel Number and WAAS Reference Path provided in the briefing strip of approach plates? What is the application for this information?
@himanshukamboj8469
2 ай бұрын
can you make it any more messier
@ahmedshemees8018
6 жыл бұрын
Nice effort but need zoom at each part
@Sean_D_Cole
5 жыл бұрын
He went over each part in detail
@mikefromflorida8357
4 жыл бұрын
You are the best at this, but please lose the guitar in the background. It is certainly not needed, and it’s irritating. Thank you.
@rangerrick8220
4 жыл бұрын
Good video - you should erase the pen marks around a section before moving on to the next section - gets too cluttered and can't see some of the writing in the section you're talking about.
@damianjez4336
7 жыл бұрын
Would be nice if you mentioned which minima values correspond to Radio and Baro
@casilasgoaler
7 жыл бұрын
Decision Altitude DA is BARO. And Decision Height DH is RADIO. In short, DA is MSL and DH is AGL.
@SpaceOdyssey-
Жыл бұрын
Is it Jepessen ?
@DigitalAndInnovation
3 жыл бұрын
Its data not datta
@PacoOtis
7 жыл бұрын
Dude! Thanks for the video! Did you ponder maybe getting your camera a bit closer and also maybe erasing some of your lines as you progress with your delivery? Really appreciate the info. Thanks again and best of luck.
@ViperDriver22
6 жыл бұрын
At 5:03 it was "as long as you can fix the OPHOW intersection." Does that mean as long as you have a working DME that can tell you you're at 0.9mi, you can get the fix?
@n148km
11 жыл бұрын
Holy cow. The info is great, but the accumulation of markovers at the last part is not good. Consider increasing the video quality. At the heart of it all, the KLAviation videos are outstanding and useful.
@manavchauhan2783
7 жыл бұрын
It's a really great video. Thanks for teaching. Please keep making more educational videos.
@jaypaulbusch
9 жыл бұрын
Great video.
@ghouseaneesahmed9477
4 жыл бұрын
Marvelous presentation. Thank you
@erdemturan6302
6 жыл бұрын
Thank you very much sit for all Your videos 🙏
@silverskaden
4 жыл бұрын
This is the best playlist / videos on the subject!
@supilottrainee
8 жыл бұрын
Thank you so much. I'm understand.
@teckjingoh4713
9 жыл бұрын
Just a question, the directions indicated in an Instrument Approach Chart, are they Magnetic Heading or Magnetic Course?
@chawkz
8 жыл бұрын
Magnetic course. Magnetic heading is only for entries into holding patterns or when ATC tell you to fly a specific heading for separation purposes being other traffic or terrain clearance. .
@theavi8tor932
7 жыл бұрын
Thank you for taking your time to make this
@girilebronkid
11 жыл бұрын
man thank u very much! i got my IR license finally! :)
@floopy312
11 жыл бұрын
This is the video I was looking for! Thank you very much :)
@DougeeeMoney
5 жыл бұрын
What does the boxed "D" in the airport sketch (between the elevation numbers) mean?
@Diveintonewenglish
5 жыл бұрын
It means Douglas
@aviatortrucker6285
Жыл бұрын
Signifying that it is class D airspace as it is a towered airport.
@Klaviation
11 жыл бұрын
Thanks for the support!
@vipulkumardamor7404
8 жыл бұрын
I like this aid
@katief8193
5 жыл бұрын
Thank you!!!!!
@GWOSAPAT
5 жыл бұрын
Thanks
@akshatlbp
11 жыл бұрын
Great videos
@castnerscutthroats9297
8 жыл бұрын
great vid
@Blackhawkpilot14
7 жыл бұрын
Airport Sketch NOT an Airport Diagram, there is a difference!
@nigelmtb
7 жыл бұрын
And that is?
@Blackhawkpilot14
7 жыл бұрын
First an Airport Diagram is labeled "Airport Diagram" in the Chart Supplement book. An Airport Diagram entails much more information then an Airport Sketch such as taxiway and parking info, Latlong and Magnetic variation, critical frequencies, Hot Spot data and detailed runway information. An Airport Sketch is as the name implies. It give the pilot basic information on lights, runway alignment and obstacles to safely complete an approach.
@Blackhawkpilot14
7 жыл бұрын
Definitions from FAA-H-8083-16A Instrument procedures Handbook: Airport Sketch. Depicts the runways and their length, width, and slope, the touchdown zone elevation, the lighting system installed on the end of the runway, and taxiways. Airport sketches are located on the lower left or right portion of the instrument approach chart. Airport Diagram. A full-page depiction of the airport that includes the same features of the airport sketch plus additional details, such as taxiway identifiers, airport latitude and longitude, and building identification. Airport diagrams are located in the U.S. Terminal Procedures booklet following the instrument approach charts for a particular airport.
@nigelmtb
7 жыл бұрын
Thank you - I had no idea. Not sure how to say I appreciate your info without sounding sarcastic - I really don't mean to!
@arod1pilot
9 жыл бұрын
Ty
@solomonpilot2510
9 жыл бұрын
+Antonio Rodriguez antonyo r u a cfi ?
@arod1pilot
9 жыл бұрын
Not yet why???
@solomonpilot2510
9 жыл бұрын
because I know somen who is a cfi that got same name as urs !
@arod1pilot
9 жыл бұрын
Nice yea my dad travel the world do he could be my half brother
@solomonpilot2510
9 жыл бұрын
but I once got up set at him because he took the twin engine airplane on my schedule !
@81773rroo7
11 жыл бұрын
Thank you. This was a well done introduction to plates.
@nikhil5556
11 жыл бұрын
you clearly didn't get your IR Licence because it's not a license, it's a rating. it's youtube, no need to lie
Пікірлер: 53