This is a step by step to ensure APT will have a successful connection to Indigosky. It also shows how to fix if your mount will not connect by reloading the driver in Indigo Server... I purchase the RPi 3 B+ on Amazon for about $50.
Hardware used:
3x ZWO 1600mm
2x ZWO EFW
1x Celestron CGX mount
1x Lodestar X2 Guide Camera
Laptop: Macbook 12 running Bootcamp with Windows 10. It has Wi-Fi 802/ac mode.
Links:
Download Instructions here:
www.indigo-astr...
Use a software to transfer the bootable img file to an SD card. For MacOS I use balenaEtcher, and for windows you can use Win32DiskImager. Please make sure you use at least 2.5 to 3A power supply on your Raspberry. Boot the RPi and it should automatically run Indigo Server.
Once installed, you need to use SSH client like Putty to update Indigosky using these two commands. Make sure the ethernet cable is attached to your internet router then ssh to the default address 192.168.235.1 using "Direct Wi-fi" from your laptop, you need to connect to "Indigosky" , it should appear on your Wi-Fi list..
To connect to the Indigo Dashboard: Use any browser and goto: 192.168.235.1:7624
To update indigosky via SSH:
sudo apt-get update
sudo apt-get upgrade
Негізгі бет Ойын-сауық APT using Indigo Drivers (Step By Step Tutorial)
Пікірлер: 7