These videos are so practical!!! Why is no one else doing this???? You deserve millions of subscribers!
@charlesmullins3238
9 ай бұрын
Couldn’t said it better…this should be a college course prerequisite in merica..🇺🇸
@Ferrari_M5
9 ай бұрын
Agreed. These are the types of videos that are truly helpful and really explain all of these ideas.
@brandonrupp5880
9 ай бұрын
You might like Jim's Goon Life. It's not quiet as data heavy but it's good too.
@SugarFreeTargets
9 ай бұрын
I questioned the same thing... You can find many arguments on forums about what's the better zero, what's the better bullet weight or what the best configuration. Yet no one bothered making a video about it. Until now
@adammayo9302
8 ай бұрын
Homie is like the Paul Harrel for the new generation.
@ryanfirst9761
3 күн бұрын
Needs a more iconic hat.
@adammayo9302
2 күн бұрын
These things have to happen naturally. The perfect hat will come in due time
@MexicanNinja82
9 ай бұрын
Would love to see this on a 50/200 yard zero. Great video as always.
@katana258
9 ай бұрын
seems he has no idea on what works does he ..
@blahblahblah7554
9 ай бұрын
I think the differences of weights are more pronounced at 36/300 than 50/200 (but yes I believe 50/200 is flatter and superior)
@j.till_z
9 ай бұрын
He has done a video on a 25/300, 50/200 and 100 yd zero. From zero to 200 a 50 yard zero is pretty consistent, but once you reach out past 200 the bullet drop is significant.
@nickadkins7765
6 ай бұрын
@@blahblahblah7554 He did the tests and 36yd zero was better. 36/300 yd zero is superior.
@blahblahblah7554
5 ай бұрын
@@nickadkins7765 depends.. if you’re looking to be a surgical shooter, 50 is the way to go. If you wanna make hits at 300/400 then 36 is superior
@gregdodd4729
9 ай бұрын
I'm impressed with the performance of the 55 grain bullets.
@davidmilisock5200
9 ай бұрын
The M193 does even better with the 20" barrel on the A2. My A2 in 5.56 in a Delta configuration is almost as good as my Aero Precision M4E1 in 6MM ARC with a 16" barrel and 105 grain Hornady match.
@Driver-ur9mf
9 ай бұрын
@@davidmilisock5200Makes sense. Cartridge was made for that length. Had only been shooting green tips from the carbine, but is way to cold for outdoor range and they say no no to those indoors. So a vid about non green tips and perhaps insight into 11.5 and 20 inches would be good.
@trentmckenzie343
7 күн бұрын
@@Driver-ur9mfI’m pretty sure PSA makes 62gr AAC ammo in regular ball, also probably PMC X-TAC
@Driver-ur9mf
7 күн бұрын
@@trentmckenzie343 thanks 👍 for the input.
@mrtipton1
9 ай бұрын
I stumbled on this channel a couple of weeks ago. These videos are pure gold. It's like the video selections are from my wish list of knowledge. Thank you!
@Driver-ur9mf
9 ай бұрын
Found him because 300blk subsonic, stayed for everything thing else.
@johnmarken3945
9 ай бұрын
Nice to see the 1:7 twist was not a detriment to the 55gr at all. Great to see that physics haven't changed and that a 14" barrel doesn't give the heavier bullets enough velocity to be as good at 300 yards bullet drop wise. Seeing the limits of that system, no magic bullet for shorter barrels in 5.56. Is what it is. Also confirmed that the m855 sucks accuracy wise, I'm not alone. You do seem to take our comments and use them so now I'd like to request and see this run with a proper 5.56 barrel length of 16" or even the original stoner length of 20" that the system was originally designed with for the 55gr vs heavier. I'd also love to see similar work done with the 6mm arc which I am coming to believe is a superior battle caliber for the AR15 over 5.56. Thanks so much!!
@seanoneil277
9 ай бұрын
M855 seems best suited to learning recoil etc. management in fundamentals, more than anything else.
@davidmilisock5200
9 ай бұрын
@@seanoneil277 The M855 was designed for better penetration from the shorter barreled M4. It runs at higher pressure than the M193, therefore produces higher velocity in the shorte barrels and has a steel wire core.
@Driver-ur9mf
9 ай бұрын
@@davidmilisock5200I had questions about that. FFL always seemed to have a can of Winchester M855. I read of an EPR or M855A1 for the Carbines, which seemed to imply 855 is for the 20". Well this EPR allegedly has faster burning powder for the shorter barrel. Faster burn equals more pressure, but complete burn in 14 inches. I told him, I'll have that. He says nope, civilians may not have that. Bolt breakage, or something. I don't know.
@davidmilisock5200
9 ай бұрын
@@Driver-ur9mf The M855 (green tip) came to be when the M4 was in general use for a while. The M855A1 (from what I could find) does have a higher pressure, however the one issue that seems to reappear itself is feed ramp wear since the M855A1 has the steel tip on the outside. If my memory is working, they created a different magazine for that cartridge.
@LarsBars17
5 ай бұрын
Bro you spoiled the ending for me
@GetMeThere1
9 ай бұрын
Most of us use M193 for practice, and most late-manufactured barrels have a 1:7 twist -- which is FAR faster than M193 requires (original M16 had a 1:12 twist). I'm interested in the effect of 1:7 twist on M193 bullet travel -- especially as it gets out to longer ranges.
@davidmilisock5200
9 ай бұрын
My only experience with the 1 in 7 twist is with the the 20" barrel on an A2. The answer to you question is from my experiance is that the M193 is very stable in the 1 in 7 and if the wind cooperates my A2 can make repeatable 600 yard hits.
@bovineexcrement8635
3 ай бұрын
@@davidmilisock5200☝️this
@Aeronaughtica
9 ай бұрын
Love the no-nonsense videos man! Straight to the point and very informative. In a future video I’d like to see a comparison on barrel twist rate vs. bullet weight. There’s a lot of charts out there regarding this, but I haven’t seen any videos with real world shooting data.
@ImpulseAudioSpeakers
9 ай бұрын
Great idea. Especially if he did 5.56 and another one like .308.
@bwcritch
9 ай бұрын
Number crunching on the computer is great, but real world data is so much more useful which is what makes videos like this so good.
@mattrogers6237
9 ай бұрын
I know how much time, energy, and $$ these videos take! Thanks for providing quality info for the everyday shooter!
@sodajones2576
9 ай бұрын
Dude this has been a great series
@MountainsMulletsMerica
9 ай бұрын
Really glad to hear you’re enjoying it! Appreciate the support!
@davedoty-ic4vh
Күн бұрын
I watched this video and one other video on all the stuff you accomplished here. I can't remember what the definitive nature was with the calibers and such on the other video but I just remembered that it along with this one is so helpful. I wonder if you've ever done a 6.5 Creedmoor and a 308 like you did here with the 556. If you've already done it please shoot me back a reference and I'll watch that video but love what you do. Great job especially for someone like me who's not as versed in all this. Helps me gain knowledge out of real practical level. So good. Thank you my friend
@mattchaffin1133
16 күн бұрын
Just started coming across your videos. Man thank you for keeping it simple. As a new shooter to this platform, I greatly appreciate the easy to understand approach. Please keep up the great work.
@soap5393
11 күн бұрын
So now I'm GLAD (again) that I have mostly M193 55 grain. I was starting to think about switching to something heavier since some say heavy equals accurate, but your practical test kind of says otherwise. Thanks!
@jlew6890
9 ай бұрын
I love these vids. Sometimes as instructors we don’t always have the right cues or eloquence to reach every student (everyone learns differently) and in those cases I’ve found that showing them these vids makes it “click”
@davidthurman2267
9 ай бұрын
No one test ammo more than ally. Your channel and them guys together is a match made in heaven
@ryanfirst9761
3 күн бұрын
These videos always interest me because I use to zero mine at 100 which is difficult with my old eyes. I use mine for hunting so I use to zero at 100 yds, but switched to the 36 a while back. Now I’m switching bullets to a 70 grain and know about what I can expect.
@ClarenceLaurent
9 ай бұрын
Doing God's work thank you for your time & effort & thoroughness of your content
@macfurn
9 ай бұрын
Same tests but with your 11.5 would be great also
@IwatchFilm
9 ай бұрын
No surprises here, the ballistic data just confirms that math doesn't lie. Thank you for the illustration of the concept, I'm sure it helped a lot of folks have a better understand.
@johncrosser8783
9 ай бұрын
I really Enjoy your Videos! You Cover Lots of Information! I’ve always been a Fan of 36 Yard Zero. Pretty much Translates into Three Inches High at 100 Yards. Growing Up in South Dakota, I Sighted in most of my rifles at 3 Inches High at 100 Yards. I’m 63 Years old now and a Marine Veteran. Thanks Again! Love watching your Videos!
@travisbond635
9 ай бұрын
We love your videos. You're saving us all alot of time and ammo by SHOWING us what's going on with all 3 bullets. Not just telling us. You do a great job at explaining what you're talking about. We love your channel and keep up the good work. God bless you and yours and God bless America 🇺🇸.
@sodajones2576
9 ай бұрын
55 grain always punches above its weight. M855 always disappoints.
@haloreachmadman555
9 ай бұрын
People always say m855 is super spicy and accurate ammo, and i love proving them wrong everytime
@gullahgeechee2699
7 ай бұрын
I use M855 for SHTF ammo .M193 is good for speeds and more accuracy and 77 for hunting deers and hogs.🙂
@AZMarine513
9 ай бұрын
Good video. I run 77gr IMI Razorcore. That ammo hits pretty hard and shoots great.
@alefig2035
8 ай бұрын
I pushed a quarter size hole straight threw 70 lb hog at 70 yards with razor core 77 otm it amazing how much of the shoulder on exit side was damaged .
@michaelcerrone1482
9 ай бұрын
Considering your ties with Wade and Ally Munitions, I would love to see these tests done in 6mm ARC.
@jbcaptain11
9 ай бұрын
That guy cannot make ammo fast enough lol. Needs expensive machinery. Props to him though for doing what I wish I could do. I want to build a browning blr mini action for the arc
@shaneciccarelli-palmer2962
9 ай бұрын
I would like to see that as well
@michaelcerrone1482
9 ай бұрын
I'm wanting to build a 14" 6mm arc for a truck gun. I've heard good things about the caliber at that barrel length, but would still like to see a video in this format and the others he's been doing on this topic, with that barrel length and caliber. Especially with the 3 offerings that Hornady has right now on it.
@scottythebody0811
11 күн бұрын
Man, your videos are great. Thanks for posting.
@Boomerfootball1
9 ай бұрын
The video I’ve been waiting for thank you good sir!
@justinswiger3855
9 ай бұрын
You have done an excellent job answering the deep dive questions I've had pertaining to balistic variables. Thanks so much, excellent content
@Driver-ur9mf
9 ай бұрын
Is like going to class. Whip out the notebook and a pen. Focus, this guy drops knowledge.
@ETdrums
9 ай бұрын
Great series idea, this is good stuff! I was very surprised by the 62gr performance at 300y (wide disbursement)., as well as the amount of drop (13 inches) of the 77gr from 200-300yds. I wasn’t expecting the 77gr to be higher at 200y than the lighter bullets but that amount of drop was crazy! Makes me wonder if the shorter barrel length contributed to that drop. In addition to optic height, muzzle devices, and barrel lengths, I’d love to see barrel twist rates with different bullet weights added to the list because I’ve read how a 1:9 won’t stabilize a 77gr down range and how 1:8 is the perfect all around compromise, etc.
@greatcornholio5541
9 ай бұрын
I’ve got a 18” .223wylde barrel and it’s got 1:8 twist. It shoots almost everything great.
@Driver-ur9mf
9 ай бұрын
@@greatcornholio5541M&P had a sport 2 with 1 in 8, saying it offers better stability. FFL said you can do better than that package. Perhaps. The 6920 has 1 in 7, chrome lined blah blah blah MP whatever, does fine w/green tips. I think, as that is all I fed it.
@DDDontCare
9 ай бұрын
You are doing such great work! This has fast become my favorite gun channel. Highly informative and relatable. I do envy those wide Open spaces and Long ranges you get to shoot.
@karlhindle5215
9 ай бұрын
Really enjoyed this series
@RicardoGonzalez-ug6xm
9 ай бұрын
Those 77grainers are definitely the ticket further out past 300yds …..great info & content keep up the awesome work mullet man 🤘🏾
@charlesmullins3238
9 ай бұрын
Yea man…got some 85gr nosler rdf the super extra pointy version…
@IkfNorCalChamp
9 ай бұрын
Didn’t they do the worst tho? I bought a bunch of 77gr to for self defense rounds. But they didn’t look super accurate from this video.
@RicardoGonzalez-ug6xm
9 ай бұрын
@@IkfNorCalChamp yes they seem to have been not very accurate at the distance he shot but next time you go out & shoot them say at 700 yds you will see that they will shoot better than the 55g fmj’s or 62g , at least that’s what I see in my rigs because of the higher bc of the 77g . Your rifle will ultimately tell you if it likes them or not .
@bigz5262
9 ай бұрын
The bullet weight didn’t seem to make that big of a difference but it’s still noticeable
@bryanduchane2371
9 ай бұрын
Get 3 different colored dots in your next test if you have 3 different bullets
@thenoras
9 ай бұрын
So awesome that you're doing this series! Literally what I commented about last week lol
@DrSundogg
5 ай бұрын
If your barrel is a 1-7 twist, it is going to effect the heavier bullets in a negative way. A 1-8 will help dramatically with heavier bullets and is something to be explored. The group will tighten up.
@jerrywiese9722
9 ай бұрын
Always informative and your show me way of teaching is a neat way to learn
@smolkahboom8552
9 ай бұрын
Been a subscriber for some time now and I love your channel. Thank you for the great content!
@DoWork316
9 ай бұрын
Great info ! It went as expected but great to see it all at once.
@thorsmith59
9 ай бұрын
Excellent comparison.
@cameronuptigrove3307
11 күн бұрын
Thanks for the data! Great info to share.
@abelacosta7200
9 ай бұрын
Awesome video bro. I personally don’t like using 55 grain ammo. I could never get a good group. I have a 16” 1/7 twist barrel on my range rifle. And it seems to favor 62 grain more than anything. I’ve shot heavier loads & I wish I could shoot more of it to work the barrel in more but man that stuff is kinda expensive. So if I buy anything over 62 grains it usually goes to storage.
@grantyoung3076
9 ай бұрын
Dude, your videos are just the best. Super practical and you're obviously a really smart guy but you don't insult your audience and show it off. There's so much banter on the internet about this cartridge in that cartridge being better, but if you want to know what a cartridge does just play with a ballistic calculator. There's no best cartridge, just a bunch of trade-offs and you have to figure out what's best or what you want to do.
@brucewanda9564
9 ай бұрын
You might try 50/200 yd zero. You will be within your group size for elevation from muzzle to 250 yards, and only -3moa (-9") at 300. Plus you will be hitting with in an inch of what your sights are on from 25 to 200 yds (not plus 3 or minus 3).
@bigz5262
9 ай бұрын
He did that in his video last year. But his results are going to be different than yours unless he’s running the same setup
@brucewanda9564
9 ай бұрын
He did another video today, using 50/200 with and without a suppressor... wonder where he got the idea? It works for most 223/556 ammo unless you are using a pistol length barrel...@@bigz5262
@ryanwierzbicki7248
5 ай бұрын
Great work, I really appreciate your videos. Keep at it!
@MrFred4513
9 ай бұрын
Another great video. You have no idea how these videos help people who dont have availability and or access to longer shooting ranges. I like seeing the heavier 5.56/223 bullet info they are becoming more popular and available. Perhaps a video showing a 77 grain bullet zeroed at 25 yards , 50 yards and 100 yards and the results of those zeros at 300 yards.
@reloadrefine
9 ай бұрын
Another great video! Informative data.. 😎 👍🏻👍🏻
@Cincinnatis
9 ай бұрын
Another video giving the best info on this topic
@greatdane3343
9 ай бұрын
Interesting, informative and well presented video 👍
@johnbowman1052
Ай бұрын
Great Job on these videos. I love how you tell us about the Gun and setup, what ammunition, explain trajectory theory, and then announce each group of shots before they occur. Without this we are just looking at another video of bullet strikes in a go pro. We know it is 50 yd zero, 100 yard shot etc... I and people that I shoot with refer back to your wrap-ups over and over so we can get it right the first time and not waste expensive ammunition verifying our equipment. I have never been able to get people to understand on the first try and you do it every time. God Bless you. I notice you often refer to what your ballistic calculator says and you are verifying it with your equipment. I am a re-loader and like many have nearly no way to verify a 200 yard shot. Perhaps you could show us how to run the numbers on a ballistic calculator and then verify on a 100 or less range the information from our gun with inches high at 100 and so on. I think this would be very practical for nearly everyone that lives in more urban areas that can never get long shots. Just a suggestion Keep up the good work. I bet you are making a greater contribution to the shooting community than even YOU know. Having spent much time on the range I realize this type education takes much effort to produce. keep up the good work, we'll be watching.
@charlesmullins3238
9 ай бұрын
I’d absolutely love see this same testing n 7.6whew….especially from a 16” 1/10”….but you’ve got my 5.56 juices goin so I’m gonna fire my ol carbine range model with the compass in the stock rn….lokk out black Bart!
@4Shreks
4 ай бұрын
More videos need to be like, RL testing. Very practical. Have you ever tested another type of 0ing other than what is commonly used to see if there is a better grouping at the 25, 50, 100, 200, and 300 yards
@kcv5716
9 ай бұрын
Great presentation of commonly used bullets. Shows people the outcomes of what to expect.
@ru2yaz33
9 ай бұрын
Bullet weight are given, but velocities information would've been nice because these effect your bullet drop over the varying distances.
@treycann
9 ай бұрын
These videos are fantastic! I would love to see a video of a 36yd zero with different grain weights but keeping the original zero to see point of impact shift. Say 77gr 36yd zero and shoot 55 and 62 with the zero for 77 and see how they compare
@adventurfly879
9 ай бұрын
Id like to see this with a 1/8 twist barrel. See if theres an appreciable difference
@willy4869
9 ай бұрын
Did you re-zero for each round at 36yds before shooting the test? Is there any appreciable difference between a rifle zeroed at 36yds with 55g and then shooting 77g with no change to the scope?
@ru2yaz33
9 ай бұрын
The bullet trajectory is initially sort of flat then turns upward (defying gravity) before its flight path falls onto the arc trend.
@devrinmg
9 ай бұрын
Not sure if I didn’t catch it but were all zeroed with the 55gr or did you zero each bullet weight before shooting them? Appreciate the content and keep ‘em coming 💪🏻
@RamrodReviews
9 ай бұрын
Love your stuff man, keep up the great work!
@jac0bbrant
8 ай бұрын
Love the straight forward info. Ever do anything for 9 mm pistols im here for it.
@salvadormelendez9749
9 ай бұрын
Very valuable info. Thanks for sharing.
@seanomeirs8362
9 ай бұрын
Another great video. I'd be curious about the velocities at 300 yards, to calculate the terminal ballistics and energy on target. I get the best accuracy with 77g, but this video makes me think that 55g might be as good or better, if it can still get the job done.
@cosmoch
9 ай бұрын
well 55gr will cerainly be a lot cheaper to run and train.
@seanomeirs8362
9 ай бұрын
@@cosmoch Definitely.
@UN4RACING12
13 күн бұрын
I'd like to see you make your own cartridges with the exact same grain and brand of powder. Of course with different bullet weights.
@geomod6850
Күн бұрын
Great video. Thank you.
@TurkFPS
9 ай бұрын
Love the video man, one of the most underrated channels on KZitem. I'm curious to hear your thoughts on a 42yd 300 zero with a 16in upper running 55gr 5.56 with a height over bore of 2.79in, ran it through a ballistic table and it was only +3.5in over point of aim at 150yds and a drop of -2.85in below point of aim at 300yds.
@ETdrums
9 ай бұрын
I’m digging the mullet videos, too! What calculator are you using?
@1GruntZPOV
9 ай бұрын
I think another cool idea would be to zero with a certain bullet and than shoot out to 300 with 55, 62, and 77gr to show the margin of error. From personal experience I competed in a competition while in the Marine Corps and we zeroed with 62 gr m855, but during the steel shooting segment of the competition we were given 77gr mk262 so that we didn’t damage the steel targets. We had to shoot out to 500 and the zero change was surprisingly not very much. This was with a 100yd zero though. With a 36 you would probably see a drastic change
@Driver-ur9mf
9 ай бұрын
Have seen gunsandgear doing reviews where he runs from 45 to 77 grains. They print all over the place. Sometimes the very same projectile from various suppliers. Sub moa to 4 moa in same rifle. But I think this guy is talking zero, or center of group impacts for various zero. That said, the other channel's center grouping was not similar from same rifle, same zero, same distance.
@blahblahblah7554
9 ай бұрын
I think 36/300 zero is great for this test (bullet weight zeros will be most pronounced at these distances) but a video at 50/200 and 100 zero’s would be greatly appreciated 🫡
@aaron7324
9 ай бұрын
Next time get three different colors of tape, that way it will be a little easier to see the groupings.
@Gunfighter5
9 ай бұрын
This makes me think we are dealing with the wrong caliber. I would like to see larger calibers tested the same way and see what you come up with. I am excited to see some rifle companies going to 6mm cartridges and larger ones.
@davidmilisock5200
9 ай бұрын
In the AR15 platform pressure and bolt thrust are the big holdups. My AR15 A2 with a 20" barrel, 68 grain Hornady match handloads trajectory wise performs much like my 6MM ARC with a 16" barrel with 105 grain Hornady match out to 600 yards. The wind becomes the problem for the 5.56. The drift in more than twice the 6MM ARC,
@victorvera1494
17 күн бұрын
Great testing!
@XcessCapital
9 ай бұрын
I'd be a lot more curious on a 150 yard zero for 300blk and a 250 yard zero for 5.56. The up close zero really isn't that important if you're really in a "battle".
@TheLoneRanger745
6 ай бұрын
Great testing Buddy
@goawaybaizuo
9 ай бұрын
Bro, I just found you, and this is some of the best content out there. I've been desperately trying to find zeros for my suppressed 11.5 and 12.5 that I solely run 75/77gr. I have a suppressed 16" and run 55gr because it's easy with my bdc optics. However, trying to figure out holds, zeros, etc, when mixing ammo, get confusing. Unfortunately, I only have a 100yd range. I'm actually looking at property solely to shoot distance and make a training ground on.
@toddjenest3212
5 ай бұрын
Another great video! I would love to see the same set of videos with 6.5 CM, 7.62x51 (.308), 300 AAC and 22-250.
This is another outstanding video in the series. Thank you.
@damonsmith71712
6 ай бұрын
Phenomenal explanation. You deserve a lot more subs than you have.
@BafflingBS
4 ай бұрын
Thanks!
@ApexNick
Күн бұрын
Great videos. I am baffled by the 300-yard results for the 55 grain. You said it was 6 in low. In your previous video it was a 0.5"-1" low, which is what I would expect. How do you explain this huge discrepancy? Thank you
@bovineexcrement8635
3 ай бұрын
good content worth twice the price. m193 out a 20" all-day baby. 52gr hpdt, Vmax handlo🎉
@bryanduchane2371
9 ай бұрын
Your dinner fantastic content. I wish you had the channel growth you should have, but people seem to watch videos with humor instead of actual content practicality....
@bmaxTJ
2 ай бұрын
Thank you
@ndnutt
9 ай бұрын
Just getting into the AR rifles and your videos are an amazing help, thank you!
@kevinshea2539
9 ай бұрын
Great video! Thanks.
@matthewdutcher80
9 ай бұрын
This series of videos is such great content. Thanks for what you are doing. Good stuff!!
@davidmilisock5200
9 ай бұрын
Great video! I found that the 5.56 cartridge performs much better for varmints with lighter projectiles. The increased velocity reduces the time of flight, offsetting the increased ballistic coefficient of the heavier projectile. As far an AR gas gun combat sight in, I use 50 yards.
@williescroggins8733
5 күн бұрын
Very informative. Keep it up
@trent76.
9 ай бұрын
Just re subscribed. 36 yrd is what my 11.5 and 12.5 are set to. Thanks
@raktap12
9 ай бұрын
none of these groups are on the orange target dot at any of the 3 ranges, which is why I prefer the 50/200 yard zero, you'll be slightly high at 100 yd on target @ 200 yd and about 8-10 inches low @ 300yd with the 50/200yd zero.
@mmorris7808
9 ай бұрын
From a military aspect, you really can't beat a 200y zero for engagements in a predominantly urban enviroment (or for civilian use as home protection either). Depends what your expected engagements might be. One of my "5.56" rifles is an 18" Wylde used mostly for prairie dog sometimes out to 450-500y. That one is def a 300 zero and works best with 77gr.
@raktap12
9 ай бұрын
@@mmorris7808 I like Hornady 75gr Superformance BTHP for distance, 60gr SP or 55gr SP for a defence round, and 55gr bulk FMJ for range use
@HB-kp6rl
9 ай бұрын
I was kinda surprised at the 100yd group out of the 55gr. It was tighter than i thought it would be out of a 1/7 twist barrel. Thanks for the info. Cheers
@williamboggs1682
9 ай бұрын
You truly do an amazing job with these videos thanks and would love to see some more silencer stuff
@phild9813
9 ай бұрын
Awesome video. You are exploring the concept of maximum point blank range in the common vernacular. Looks like all would work just fine on a fairly large target to 300. I prefer 77s personally.
@ExplorinInTheWoods
9 ай бұрын
I’m going to keep on asking for a 50yd zero video, but these are great videos
@MordecaiSoup7
9 ай бұрын
High quality content. Keep up the great work!
@fullthrottlefreddie7678
9 ай бұрын
Awesome video! I also use a 36yd zero. Tho when training I only have 100 yds n in to work with But I’d love to see how a 16” 1/9 twist unsuppressed n 1/7 twist unsuppressed differ with just common 55gr 5.56 I think it world represent most of the viewers setups. Maybe I’m wrong but would still like to see the difference. Great vids keep up the great work!
@ejan8088
9 ай бұрын
Truly excellent content!
@hbarwickjr
9 ай бұрын
Another subject I was wondering about between the bullet weights and their impact. Your doing a great job here too! Subscribed a few days ago.
Пікірлер: 355