That was cool. It would be great to get a follow up with information from all your experience on where to put the fitting in the differential housing and how to route the copper line inside.
@northridgenation
2 жыл бұрын
Thanks for the idea!
@hadtocheathimtobeathim6549
5 ай бұрын
Glad I just bought one that has lockers front and rear and the modular bumper and the improved steering rack and improved tie rods and fox remote reservoir shocks and all the goat modes and rear seat heat and 35’s.
@BennyTygohome
2 жыл бұрын
Been a fan of Northridge online store and shop since the 2000s when i had my 04 TJ. Your video channel is awesome too.
@northridgenation
2 жыл бұрын
Thanks Benny! We appreciate your support.
@AsianPersuation24x7
Жыл бұрын
my base Bronco will be getting these eventually lol
@vicf2419
Жыл бұрын
Same here! I just wonder what would the total cost be to do this. From parts to install.
@banzaiib
Жыл бұрын
I want to put one in my ranger's front, m190. Would love to see a complete install vid!!
@MonBerry
2 жыл бұрын
Awesome video. I have a 4cyl auto big bend. The stock gears are at 3.73 and I am trying to change them to 4.7 so I can add 35”s. The front axle is m190 so where do I find a gear for that? Can you help me out?
@northridgenation
Жыл бұрын
The aftermarket is still lagging on the M190 front gear sets. Keep an eye out on our Channel. We'll let everyone know when they are available.
@kaylamorris3565
9 ай бұрын
Hello, is it possible to add front lockers onto an outer banks model that already has rear lockers? How would you engage the front if it’s added?
@northridgenation
9 ай бұрын
Yes, you can add lockers to the Outer Banks front axle. Your choices right now are limited to an ARB Air Locker, so you would use the switch that comes in the ARB kit.
@northridgenation
9 ай бұрын
You could also swap out the smaller Outer Banks front axle for the beefier Ultimate Dana 44 front end. They come with factory type E-Lockers and are available in different gear ratios: www.northridge4x4.com/part/complete-axle-sets/ud44fbro470eld32-dana-ultimate-d44-front-advantek-axle-unit-4-70-ratio-e-locker
@markcole6475
Жыл бұрын
Is there an actual LSD style posi trac available for the rear of the bronco or just an air locker?
@MatthewRestainoTube
Жыл бұрын
Did you have to do any drilling on the axle to route the air line? Or is there a bung and a knock out already present on the M220?
@northridgenation
Жыл бұрын
You need to drill and tap a hole for the ARB bulkhead fitting.
@jonhenson2523
8 ай бұрын
How does this work with the factory computer and G.O.A.T. modes?
@northridgenation
8 ай бұрын
The ARB Air Lockers work fine. They are not wired into the factory computer system, so they do not have any effect. Want the locker on? Turn it on. Hi range, low range, baja mode, economy mode, the Air Locker doesn't care, it locks in and gives you that extra bit of traction.
@Dex_NeutralMinded
Жыл бұрын
Just to confirm. You can install back locker on a base model. Is that correct.
@northridgenation
Жыл бұрын
Yes, the rear axle is the same M220 axle and would use the ARB Air Locker pn# RD245. There are differences in axle shaft length and gear ratios between the models.
@majorm722
Жыл бұрын
great video! what ratio/ gear manufacturer did you use here?
@northridgenation
Жыл бұрын
ARB had us stay with the stock ratio for now. They supplied the gears for us. iirc the rear gear set was Yukon and the front gear set was OE Ford (Ranger).
@jumapelljohn3958
Жыл бұрын
So for the new Bronco like the one here what is an approximate cost for this entire set up? I know you have to add the air compressor system as well labor etc.
@northridgenation
Жыл бұрын
It would be best to email or call that question in. sales@northridge4x4 or 866-601-5340.
@hugocarranzacr
2 жыл бұрын
Hi Tim, where you locate ARB switch's,
@northridgenation
Жыл бұрын
On this Bronco, ARB was using their ARB Lynx system to control the air lockers. www.northridge4x4.com/part/programmers-tuners/lx100-arb-linx-vehicle-accessory-interface
@bucknbison2297
2 жыл бұрын
I have a 21 Big Bend and would like to add a rear locker, can you please provide me with which parts are needed? Thanks in advance.
@northridgenation
2 жыл бұрын
For an open diff axle (no factory lockers), use ARB pn# RD245: www.northridge4x4.com/part/lockers/rd245-arb-rear-air-locker-m220-32-spline You'll also need an on-board air compressor: ARB Single: www.northridge4x4.com/part/compressors/ckma12-arb-12v-compact-air-compressor Or the TWIN compressor: www.northridge4x4.com/part/compressors/ckmta12-arb-twin-compressor
@bucknbison2297
2 жыл бұрын
Thankyou much!!! Also which ring and pinion set do you recommend? I have 4.46 gears since it’s a manual Bronco.
@northridgenation
2 жыл бұрын
@@bucknbison2297 What tire size are you running or going to run?
Пікірлер: 31