What do you think? Too big, or just the right size? Let me know in the comments below! LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Playfield): amzn.to/3t0JJgH LG 32MN60T-B 32" Class FHD IPS FreeSync Monitor (Refurb option)://amzn.to/3fRnPJ2
@jonathanstubbsguitar5340
3 жыл бұрын
Legend
@ShinobiShowdown
3 жыл бұрын
The best mods are often the most difficult and complicated. I know this from my modding but the end product looks awesome!
@ericpruess9294
3 жыл бұрын
Awesome job! I think you have your product links backwards.
@imnitguy
2 жыл бұрын
I'll have to let you know after I install the one I just ordered! :) :)
@sailingsvzara
Жыл бұрын
For the tempered glass upgrade, what are the exact dimensions the glass should be? Also, should I use 1/8" or 1/4" glass?
@normelder6624
Жыл бұрын
I'm a little late to the party on this. Just did this mod this weekend. Though I kept my pcb stock. The geekworm 1.5 did not work correctly. Had to use the V20 version. Along with the screen fix file from teamencoder, it worked great! I added the Marseille mCable Classic in line with the hdmi output. Gotta say, if you are keeping the pcb stock, this IS A MUST!!! Along with the ability to control the monitor settings, contrast, brightness etc. Adding this just rocks. It upscaled the image to true 1080p AND added anti aliasing. WOW! What a difference. Kept the pcb output in 720p so I didnt lose performance.
@mgaddis98
Жыл бұрын
Any info on how you got the geekworm V20 to work? I can't seem to figure out the proper pin/plug configuration on the V20 to get the signal to the monitor.
@mcrecordings
3 жыл бұрын
It looks so much better with the 32" playfield and that black apron bit at the bottom gone. Excellent job.
@cooltoy
3 жыл бұрын
thank you very much!
@robbylong5510
7 ай бұрын
For anyone looking for 32" monitor alternatives, I used the Viewsonic VX3276-mhd. This was a PERFECT fit with no decasing. I used the 1080p model, but the 2k model had the same dimensions
@robbylong5510
7 ай бұрын
i.imgur.com/Luk6uMu.jpg
@MartinBlake-m3u
6 ай бұрын
How did you fit the depth w/o decasing? There is a large bump out on the back bottom side.
@NoahSties
3 жыл бұрын
the depth effect is UNREAL, I plan on doing this to my unit if I get bored of the games
@EnemyFire
2 жыл бұрын
Love the videos you make. I’d really like to see you mod the cabinets so we have a step by step as you were doing it.
@cwafflestx
Жыл бұрын
Well Doug I just ordered this monitor after watching this video. All of your other videos have been of great help to me (and can't thank you enough for answering previous questions I've had) and this seems pretty straight forward. I think I can handle removing a brace and flipping it over to be used in the back. :-) And de-casing wont be an issue.
@DannyWelch
3 жыл бұрын
That is one hot vpin! Love the space saving cabinet size combined with excellent playfield, backglass, and dmd ratios. You really knocked it out of the park, and I appreciate you taking the time to share how you did it and a complete parts list. Thanks!
@cooltoy
3 жыл бұрын
Glad I could help!
@imnitguy
2 жыл бұрын
Me too. I just found this thread and I have already odered everything including the A1UP AFM cab to mount it all in. I have built many MAME games but this as you say knocks it out of the park! Doug I hope you have time for me if I have questions!!!! Thanks so much!!!!
@jessepotter365
3 жыл бұрын
Excellent job, Doug! I really wish we had more options in the market. I would pay for a 1up (toy) virtual pin if it had a higher resolution 32" screen and priced around $1000. I feel it hits a perfect sweet spot between the minimal 1up and a much more expensive virtual pin.
@ianhodgson3739
Жыл бұрын
Can i just put in the 32inch monitor as described and the machine will still be fine to play
@Maxxone08
Жыл бұрын
You can do his mod with a 2k screen and the marseilles will upscale 720p to 2k.
@bryan.t777
3 жыл бұрын
Thanks for the guide on what you did. I was originally going to build a full size cab but I think the A1U frame will be plenty big enough for what I want and not take up too much room.
@cooltoy
3 жыл бұрын
Glad I could help
@basstone18
3 жыл бұрын
So stoked, got my star wars pinball on Monday. Very happy with it now but fully expect to modify it eventually. Appreciate this coverage of your mods.
@cooltoy
3 жыл бұрын
Glad I could help, enjoy your new machine!
@CircuitSky
2 жыл бұрын
Your virtual pin videos are the best! They definitely pushed me to mod my AFM cab and I'm almost finished now. Just need to wire up the buttons & plunger and configure. Then install the 32" monitor in the cab. Everything has worked out perfect so far. That Acer is incredible in the back box. So easy. :-) And the PC mounting bracket underneath works awesome for the SFF computer I'm using too. Thank you for your videos! ;-)
@cooltoy
2 жыл бұрын
Glad I could help!
@metzen01
2 жыл бұрын
Thank you for being so detailed. This is going to help me with my 1UP arcade pinball project that I have upcoming. Just getting the lcd ordered and will be buying a damaged unit for cheapo but doesn’t matter because it will be gutted and then following your awesome steps in this video!! 👍😎🤙
@way2faded
3 жыл бұрын
Damn that 1up screen looks like 1st gen LCD compared to that IPS. Badass mod man!
@cooltoy
3 жыл бұрын
thanks!
@adamkalb1412
3 жыл бұрын
Will The Academy Please Give CoolToy An Oscar for the MOD of the YEAR🙏🏻🏁❤️👍💍
@cooltoy
3 жыл бұрын
much appeciated!
@adamkalb1412
3 жыл бұрын
@@cooltoy ❤️
@19kfox
3 жыл бұрын
Love these Cooltoy R&D videos. 🦊👊🏼
@shreddyvedder
3 жыл бұрын
You are killing it brother!! Keep up the awesome work!!
@cooltoy
3 жыл бұрын
thank you very much!
@Dsuds23
3 жыл бұрын
Awesome video as usual. The v display you recommended for the stock monitor is perfect. I was able to change the colors and turn down the brightness. What a huge difference. It's a shame that they couldn't do this before they shiped this out from the factory. This 32-inch mod has got me tempted. Maybe down the road. Thank you for making awesome content and helping me mod my cabinet. Shout out to Nail Buster for being the man and providing us with the software to make this happen. If I could I would buy you a beer.
@cooltoy
3 жыл бұрын
happy to hear you were able to get the monitor settings tweaked to your liking. Totally agree, Nailbuster's software is truly an amazing gift to the community, can't recommend it enough.
@Dsuds23
3 жыл бұрын
@@cooltoy broke down and ordered the 32 inch monitor this morning. Now going to call the local glass shop. Thanks for making an enticing video lol
@chuntimouse5445
Жыл бұрын
Just scored this 32" Monitor for $75 looks great for 1080p
@arcadewill7011
3 жыл бұрын
Thanks for video. It looks great. Furthermore, thanks for all your videos on digital pinballs because they have all been so helpful and desired.
@cooltoy
3 жыл бұрын
Glad you like them!
@0221serendipity
Жыл бұрын
Very cool 😎 modifications! Excellent and masterful job!
@DavidBroiles
3 жыл бұрын
Thanks again for the Mod tips!! Just installed the 32" monitor and it really looks good, GREAT recommendation!! I'll be getting some Lexan/plexiglass instead of tempered/rolled glass because this will end up at our local Rec Center in Locust Point, Baltimore, MD, with lots of kids once COVID restrictions ease up. This will look great next to our 4 player stand-up Retro arcade/ 4 player stand-up Steam Bigbox arcade, 4 player motion arcade w/Xbox 360 Kinect running Aurora, and 7 player Rockband/Guitar Hero music Arcade. Will be adding two Sinden Lightguns to the Steam Arcade once they come in. If you're ever in the area feel free to check it out!! Thanks again!!
@ThomasGrillo
3 жыл бұрын
Thank you SO much for showing us how to do this. It looks amazing! By the way, I got my Marvel Pinball in, and found I can NOT see the DMD, so I'm in the process of prototyping a magnifying device to park in front of the DMD, so I can see it. It's pretty simple, just a couple of suction cup tipped toy arrows, and a pair of lab clamps, with swivel grips, which will hold a Fresnel page magnifier, at just he right angle. The magnifier makes the DMD look nearly as big as a 4/4 scale DMD. I'm definitely going to have to look into installing 31" monitors. Using the 24" screen, with the included tables is like playing pinball with a BB. LOL That's really hard for me to see. Congrats on getting that monitor in, and the exterior detail work reinstalled, nicely! :)
@cooltoy
3 жыл бұрын
glad to hear you McGyvered a solution for the DMD for yourself, I know that's one complaint my wife has made about our Star Wars pinball, that the DMD text is small and hard for her to read.
@ThomasGrillo
3 жыл бұрын
@@cooltoy Ah, sorry to hear your wife isn't able to read that tiny DMD, either. All the stuff you need to make the device is on Amazon. Just look up Fresnel page magnifier (7x10), for the lens, and just toy arrows, lab clamps (test tube holder clamp). The arrows' suction cups hold nicely, to the plex, or rails. Position about 3, or 4 inches out from DMD, and center along sightline, between DMD, and height of eyepoint of player.
@CompleteGeekTV
3 жыл бұрын
Like a glove. Very nicely done!
@cooltoy
3 жыл бұрын
thank you kindly!
@zilla66
3 жыл бұрын
I would pay you serious cheddar to mod mine like this. Amazing
@propwash6880
3 жыл бұрын
In VPX you can manipulate the tables so you dont lose that bottom cropped area. You can also resize in nvidia control panel as well. I think I'm going to stay stock playfield screen. I like ease of access to my PC inside. I'll do something like this when that monitor blows out.
@cooltoy
3 жыл бұрын
true, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mention it just to be up front with everyone on the end results.
@toyboxtalk9918
Жыл бұрын
Great content thanks for sharing ! 💥
@mythology0007
2 жыл бұрын
That is amazing! Thanks for the video man. I'm going to build one.
@cooltoy
2 жыл бұрын
Go for it!
@mythology0007
2 жыл бұрын
@@cooltoy How long did you have that pinball cabinet before everything started crapping out on you?
@garogercade7850
3 жыл бұрын
Thank you. This video was very helpful!
@cooltoy
3 жыл бұрын
Glad to hear it!
@mixedhairless
3 жыл бұрын
This should have been stock!!! Now I want one!!🤝
@kristendrews3895
3 жыл бұрын
I am excited to try this! I have a couple questions. How easy is it to get inside the cabinet once this monitor is installed? Are you able to use the original monitor base to angle it up or will the monitor have to come out completely? I'm also assuming you had to completely remove the original monitor from the machine, but I just wanted to make sure. Thanks for the content and always engaging with your viewers!
@cooltoy
3 жыл бұрын
you can get inside the cabinet through the backside panels. Otherwise you would need to take off the trim pieces, remove the glass/plexiglass, and remove the monitor if you needed to access the inside front of the machine. As shown in this video, I'm using the original monitor base frame. The original monitor will need to come out as there is no sense in leaving it inside and then placing a new monitor on top of it.
@zro2gon
3 жыл бұрын
I'd like to see a 27 inch monitor in it without too much modification if possible. Great video as always!
@cooltoy
3 жыл бұрын
I'm not going to be downsizing from this set up personally
@DJ_Blaker
3 жыл бұрын
Perfect Mod! Looove it
@cooltoy
3 жыл бұрын
Thank you!
@3jacksonderek
3 жыл бұрын
Great video!
@cooltoy
3 жыл бұрын
thank you
@ritualdelo
3 жыл бұрын
Killer job man
@cooltoy
3 жыл бұрын
Thanks 🙏
@joeykush6245
2 жыл бұрын
Looks so much better
@reallife1614
3 жыл бұрын
Wow! Just wow!
@bena4914
3 жыл бұрын
How much $ to get you out to NJ to mod mine? Great work man - maybe one day ...
@hollywoodpolo9872
3 жыл бұрын
Doug great video as always? Any future mods to your 1up pInball?
@cooltoy
3 жыл бұрын
I think I'm pretty much done at this point, not a whole lot left that interests me in terms of changing the machine any further.
@rjclarkeePincadeRebel
3 жыл бұрын
You can alter the playfield size anyway in vpx and future so cutting off the bottom isnt an issue.
@cooltoy
3 жыл бұрын
true, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mention it just to be up front with everyone on the end results.
@rjclarkeePincadeRebel
3 жыл бұрын
@@cooltoy absolutely sir, PLUR.greets from Spain
@gibsonplayer8
2 жыл бұрын
Please do a video on how to install the back glass monitor, and how to set up your computer to be able to use both monitors. Also,. what pinball software are you using and let us know how you mapped everything out to get this awesome setup. Seems as though many people are not sharing their knowledge to dumb people like me.
@cooltoy
2 жыл бұрын
I’ve already done all that in other videos
@dman1848
2 жыл бұрын
Would be good if someone made a 32inch kit for these machines. I feel the standard monitor looks just way to small for the cabinet
@jonathanhazlett8880
Ай бұрын
I very much appreciate your video as I was able to clearly follow your procedure and my 32 " screen is in and works perfectly! As for the glass, I am considering ordering a piece, but I'm concerned about having the back end resting on the repositioned frame piece (with a friction fit) and screen. Or maybe I am not understanding that part correctly?
@DavidBroiles
3 жыл бұрын
Great mod!! How's the angle and depth of the play field feel? Are you getting any reflections off the tempered glass or between the 32" screen and glass that make it harder to see the play field? It looks great! I just got my pc and vsdisplay for stock 24" at 1080p and extra back screen monitor installed in the cabinet. Connecting the buttons and plunger this weekend. Will seriously consider updating to 32" in the future. Just worried about angle, depth, reflections and glare.
@cooltoy
3 жыл бұрын
The angle of tilt is almost the same as it was for the stock monitor, so no complaints there. Also zero issue with glare or reflection from the new piece of glass.
@DavidBroiles
3 жыл бұрын
@@cooltoy I'll be upgrading to 32" then, thanks for all the tips!!
@justingay9413
3 жыл бұрын
Thank you for these Arcade1Up pinball videos. Currently with my Marvel machine I have done your first two videos minus the SSF using all of the same parts. The Amazon links are very helpful. I'm currently waiting for my backglass monitor and the 32 monitor. I will be doing those two mods next. I have question on your power management. Are you still daisy chaining off of the stock power supply with those splitters to power the backglass monitor and 32" playfield monitor? My stock power supply is currently powering the DMD and playfield monitors as well as the sainsmart board. Thanks again! These videos have been inspiring.
@cooltoy
3 жыл бұрын
My back glass monitor and playfield monitor are both separately plugged into a power strip.
@justingay9413
3 жыл бұрын
@@cooltoy Thank you!
@mosquitos777
3 жыл бұрын
Just perfect👌🏻
@cooltoy
3 жыл бұрын
thank you so much 👍
@topcat43truffles15
3 жыл бұрын
“I HATE YOU” But seriously Doug, amazing job. For a little more money Arcade1Up could have done the upgrades, and totally blown peoples minds.... BTW, I still love my Marvel Cab, but seeing what they could have done just makes me want more.... Can we say, next generation? Listen up, Arcade1Up do the upgrades in the same size cabinet! Do generic cab artwork, package all 30 games, upgrade to 1080p I’ll be first in line to buy it....and while I’m wishing for the moon... Plug in modules (or some way for idiots like me to easily) install game packages we can additionally buy. I think that about covers everything...lol Love your posts Doug...👍🏻❤️😎
@cooltoy
3 жыл бұрын
I'm still personally shocked Arcade1Up didn't at the very least include internet connectivity and the ability to download and purchase new tables on their machines. Seems like that would have been a no brainer money making option.
@pmmach
3 жыл бұрын
Very nice mod!!!
@MiamiLoco
2 жыл бұрын
Great video. You mentioned that the custom glass had "rolled edges" Is this the same as "Seamed Edges"? If not, what's the difference?
@propwash6880
3 жыл бұрын
I can confirm that the IPS 4k version of this monitor fits. No need to loosen the side screws either. I think I am going to install some L brackets on the corners under they lock down rails for the glass to sit on.
@andrewoxford1123
3 жыл бұрын
What’s the model number for the 4K version?
@propwash6880
3 жыл бұрын
@@andrewoxford1123 Sorry, I thought it was 4k, it is 2560 x 144. 32QN600-B
@andrewoxford1123
3 жыл бұрын
@@propwash6880 Thanks!
@shlap007
2 жыл бұрын
Curious as to what your total investment was in this machine with the monitors glass and all other components.
@johnlarosa3137
3 жыл бұрын
Hey Doug - followed your video and everything was as simple as you showed. I’m noticing some tables in Future Pinball now look pixelated. Is there any software setting adjustments you recommend with this monitor? Thanks for your videos, they’re great!
@cooltoy
3 жыл бұрын
Double check the resolution setting you have for the playfield inside Future Pinball. Or check to make sure you have the latest drivers installed for your graphics card.
@sightingson18wheels
3 жыл бұрын
Awesome Doug! Now about those roms... Lol with the shut down of VPin, where else can we go for a sweet front end like that?
@cooltoy
3 жыл бұрын
Nailbuster.com for the front end
@sightingson18wheels
3 жыл бұрын
@@cooltoy Thank you Doug! You are awesome!
@Super_Bros.
Жыл бұрын
It took it from being awful to amazing; the original monitor being 24” 720p was horrid.
@carperdiem8754
Ай бұрын
I was really dissaoointed how washed out the screen on my Marvel A1up pinball machine. I don't mind the smaller size, but the screen quality is trash. I may try this upgrade, but am worried that the washed out look will carry over to the bigger screen
@serpserpserp
27 күн бұрын
Try changing your plexi glass out for real glass first.
@HotGhettoMusic
3 жыл бұрын
All this work just to bring the Zen table up to par with the atGames...
@DavidBroiles
3 жыл бұрын
Don't know if Zen Studios will give Steam cabinet code for atGames cabinet.
@HotGhettoMusic
3 жыл бұрын
@@DavidBroiles They won't, they want to punish people who don't buy their inferior hardware. They've alluded to suing people who own their products for playing them on atGames, for what I don't know, but they've said it. All they're going to do is push people who own their stuff into using a cracked version for cabinet mode. They should send their lawyers out for those people, not their own customers who just don't buy their wack physical hardware.
@Lovetron99
2 жыл бұрын
Dying to know... what did you do with the stock monitor?? I'm about to embark on this and looking for ideas on how to put that to work. Thanks for the great videos, they've been an extraordinary help getting this cab converted.
@cooltoy
2 жыл бұрын
Stock monitor I donated to a friend
@joshhundley5191
3 жыл бұрын
Before i saw your live video and you posting this I was trying to figure out what monitor I was going to go with. Asus has a thin body 31.5” (found on Best Buy) that I was thinking of using. Seeing the 32” I see you used, I wonder if the .5” less would be just enough where you wouldn’t have to uncase it.
@joshhundley5191
3 жыл бұрын
I’ll most likely just order the monitor you used though, wife will kill me if I keep buying and returning shit 😂
@cuban600rr9
3 жыл бұрын
31.5 might be the magic number for those of that dont want to pry the bezels off. It looks like most 31.5 screens are 2 inches less in height compared to the one used in this video
@cooltoy
3 жыл бұрын
@Josh Hundley it'll will be a case by case basis since all monitors are made differently.. I contemplated using a few other different monitors but had to turn away from them since they had their HDMI input ports on the sides of the monitors, and I knew that would be problematic for the install. Lots of little things like that I had to keep into consideration. Though you may very well get lucky and find that you don't have to de-case that particular ASUS monitor. If you get it, let me know how the install works for you as I'd be interested to know the end result.
@aaronsilva5784
3 жыл бұрын
Seems like a no brainer. Do you think Arcade1up will make a "legend" or premium version of these with bigger screens?
@cooltoy
3 жыл бұрын
If there is money to be made, then Arcade1Up will make it
@aaronsilva5784
3 жыл бұрын
@@cooltoy their decision making has been sus on a few things so..
@vilhelmstein2091
3 жыл бұрын
Love it 😀
@cooltoy
3 жыл бұрын
Thanks 😁
@knight76a1
Жыл бұрын
Hi Doug, I've watched this video a few times now and wondering how the 1080p screen is working out over the 32" playfield for pixel pitch. I'm curious if now that you have had it for a while, do you want to go to 2k or 4k to bump up the res? I'm about to do this mod myself and am looking at a 1080p 75hz IPS panel, and weighing up whether to go with 2k instead. Thanks, and great videos. I've subbed.
@cooltoy
Жыл бұрын
I got rid of this machine a while ago now. But when it comes to virtual pinball I’ll tell you higher frame rates will give you more enjoyment and play experience than higher resolutions will. So if I prioritize getting the highest frame rate monitor you can for your budget and that your pc specs can handle
@knight76a1
Жыл бұрын
Thanks for the info, did you keep your atgames also or is that one gone? Curious if you have any virtual pinball cabinet now?@@cooltoy
@kernelrom2349
2 жыл бұрын
Great video. I was just about to buy both monitors but they have gone up about 30% in price 😭
@cooltoy
2 жыл бұрын
Oh no!
@cynandude
3 жыл бұрын
Great mod. So what’s now driving the bigger display and how did you up the resolution from 720?
@cooltoy
3 жыл бұрын
I have a PC inside
@AdamAnalytical
3 жыл бұрын
Great video! Since the monitor is 75hz are you running the games at 75 fps?
@cooltoy
3 жыл бұрын
Yes I am
@videogamevegasYeOldeAccount
3 жыл бұрын
CoolToy, So the moral of the story is... Buy the AtGames Legends Ultimate Pinball when it becomes available again :) I see what you did there :P Just Kidding :) If I was into modding, this is a great upgrade vgv
@cooltoy
3 жыл бұрын
The AtGames machine is pretty great too, very very easy to add a PC to that device as its natively set up to support that type of thing
@ZermenoBoy
2 жыл бұрын
hello. Great video. Can you tell us what Vdisplay convertor you are using for the monitor? Or is it connected directly to the PC?
@cooltoy
2 жыл бұрын
Connected directly to the PC via HDMI
@matthewwebb8245
3 жыл бұрын
Dude, this is so badass!!! Now to just find an actual machine…
@cooltoy
3 жыл бұрын
Glad you liked it 👍
@ajsmvp
3 жыл бұрын
Hey Doug I tried the LG monitor with the Geekworm board from your other video and the screen either doesn't turn on or cuts in and out. Any suggestions?
@kheavridnt
Жыл бұрын
Thanks for the video! I just ordered this game and the 32" screen upgrade looks like a must. If I take a stock game can I add the larger screen? Will it go to 1080 or stay at 720? Or are their other pieces I need to add? I have some videos to watch through!
@cooltoy
Жыл бұрын
if you keep the stock PCB you will need a geekworm adapter to convert the LVDS signal to HDMI. You will also need to reflash the PCB to get it to work properly. I replaced my PCB with a PC as shown in this video.
@normelder6624
Жыл бұрын
I used the geekworm v20 hdmi adapter. Had to add the teamencoder screen fix file. Then it worked correctly. If you are keeping the pcb stock, definelty would suggest an upscaler of some kind. I used the mCable, about $89 on Amazon. Upscaled it to 1080p and added anti aliasing to smooth out the graphics and jaggies. Looks way better. Cheaper option than a pc, and you are wanting to keep the pcb.
@spoonman2084
3 жыл бұрын
I wonder if you could achieve most of this benefit with less work by putting in a 29" ultrawide monitor. A 32" (27.89" x 15.69") vs 29"UW (26.67" x 11.35"). to compare to the 24" it shipped with (20.92" x 11.77")
@drmoze
Жыл бұрын
the pinball playfield ratios would be way off. not a good idea.
@Dwish7669
3 жыл бұрын
I know this video isn’t about it but I was wondering your opinion on buying a full size pinball machine from xtremegamingcabinets. They used to be called Retroplay. They’re a company out of Australia. I just want an himself opinion on buying the best full size vpin and I trust your opinion. Thank you.
@mlk4life
3 жыл бұрын
You are using Steam to run your tables right? I thought I heard you say that before..? Id love to know exactly what youre doing to power on and off the PC etc. I know you can boot into steam or big mode.
@jeromelambert1048
3 жыл бұрын
Nice setup! Mind sharing what graphics card you chose?
@cooltoy
3 жыл бұрын
Gigabyte GeForce GTX 1650 D6 OC Low Profile, which is technically a little over kill for my particular mod pc of choice
@ac4054
3 жыл бұрын
Are the games running at 1080p now? Looks great!
@cooltoy
3 жыл бұрын
The stock monitor is 1080p but was resigned to only outputting 720p from the stock hardware. I showed in previous videos on this channel how to hook up the stock monitor to the pc and what it looks like running 1080p also on this channel if you want to see that.
@ac4054
3 жыл бұрын
@@cooltoy I watched those videos as well. I figured the stock pcb couldn't run at 1080p. I was just being hopeful. Would love to upgrade the monitor and keep the pcb stock and run at 1080 but that's just asking too much 😔
@border411
2 жыл бұрын
Just to confirm.....You can buy this monitor and just connect it to the OEM electronics via HDMI?
@cooltoy
2 жыл бұрын
no, this video is me connecting a monitor to a PC. I removed the stock Arcade1Up PCB a long time ago.
@border411
2 жыл бұрын
@@cooltoy is it possible though? I prefer the Arcade1Up games WAAAAAY more, but the AtGames play field setup. Just wondering if I could get the A1Up setup for me with only installing the monitor you referenced. I guess I would need a LCD controller?
@cooltoy
2 жыл бұрын
it's possible, but you would need other things like a particular geekworm lvds to hdmi adapter and the arcade1up pcb firmware to be re flashed with a custom build.
@gibsonplayer8
2 жыл бұрын
Question for those who are really intelligent concerning virtual pinball machines. Would this monitor upgrade work along with the current software used by Arcade 1Up? Cooltoy mentions that he is using a computer. Also, I do not know how to get these pinball tables downloaded on my computer. Seems as though many free sites have been taken down. Please, any help you can provide would be great.
@ricardomarino3763
Жыл бұрын
why not just buy a custom virtual pinball? seems too much trouble.
@electriceyeslide5959
2 жыл бұрын
Nice!
@paulcleary8088
2 жыл бұрын
Well, Target just (mistakenly?) sold the Arcade1up Marvel Pin for $150, so I expect a bunch more views for this video in the next few weeks.
@cooltoy
2 жыл бұрын
Just going to be a bunch of disappointed people that get cancellation emails from Target.
@mark100177
2 жыл бұрын
Is the monitor plug n play? I appreciate the video but would like to see how much more effort it is to actually connect the monitor.
@cooltoy
2 жыл бұрын
Monitor connects directly to a PC via HDMI. If you want to connect the monitor to the stock Arcade1Up pcb you would need a specific Geeekworm adapter board
@mark100177
2 жыл бұрын
Thanks for your reply! Will be watching your other videos to get more familiar with the machine and all the mods.
@propwash6880
3 жыл бұрын
How are you liking this addition? Still dig it? I am still using the stock monitor with my gutted popper 1up. Sometimes I think it is not necessary, some days I think it would be awesome. My only problem is I like the deep recess of the 24" I don't want to do the effort and wind up not liking it. I guess I can just lay a monitor in there and see if I like it.
@cooltoy
3 жыл бұрын
I love it personally, but to each their own. Do whichever you feel suits your needs the best, I don’t advise on investing time and money towards a mod if you yourself don’t feel you NEED it.
@propwash6880
3 жыл бұрын
@@cooltoy I know, I just wondered if you changed your mind. Your first 32" concept you seemed to be for the 24". But did you not have both cabs at that tiime? It seems like a good mod because the backglass is nearly as big as the playfield, sometimes it looks bigger lol
@EceAlpuğan-f1f
23 күн бұрын
I know this is quite old but I can’t find either monitors. I’m in the UK. Any others I can use? Thanks.
@cwafflestx
Жыл бұрын
Thanks!
@cwafflestx
Жыл бұрын
Cant thank you enough for all of the great videos and assistance as I have worked to upgrade my pinball machine.
@elwdriver
2 жыл бұрын
is there a way to put a monitor in the back screen to change to whatever table you are playing?
@argniests5357
3 жыл бұрын
do you have another video that explains the hardware in this build in more detail? I was wondering what kind of controller board is making your buttons work? Is it some kind of USB connection to your PC?
@cooltoy
3 жыл бұрын
yes, I made other videos on this channel about this build showcasing and explaining every component used so far.
@raysater4083
3 жыл бұрын
Hi since the update on attack from Mars pinball. I haven’t been able to get video mode on fish tales table. Anyone else have that problem?
@justinscricco2232
2 жыл бұрын
Hey, Is it possible to show how you actually connected the monitor to the computer inside the machine? I'm not an electrical guy by an means. I still haven't picked up the initial pinball machine, but I plan on doing so very soon.
@cooltoy
2 жыл бұрын
Just a simple HDMI cable connection for the playfield monitor
@HollowBox
Жыл бұрын
What would you recommend if I wanted to put a 120 or 144 hz oled 32 inch monitor in it
@ronyoung3167
5 ай бұрын
very late to the game. Just purchased the 1up starwars pinball. Can I just update the monitor without any other mods? That much I can do on my own.
@babypigmotor
Жыл бұрын
Did you make any other mods to the electronics? Just replaced the monitor correct? No other electronics ?
@cooltoy
Жыл бұрын
I removed the stock PCB and replaced it with a PC
@babypigmotor
Жыл бұрын
@@cooltoy so just doing the monitor prob isn’t worth then?
@darrelljohnson3587
3 жыл бұрын
I read in the comments that you have this 32" monitor plugged in separately to a power strip; When you turn on the power strip, does the monitor turn on as well, or do you have to take an additional step and press a button on the monitor or a remote to turn the monitor on?
@cooltoy
3 жыл бұрын
Monitor comes on automatically when I turn on the power strip
@saintsinister8597
Жыл бұрын
But does it look any better? Is it sharper, brighter, less blurry ??
@cooltoy
Жыл бұрын
yes
@Shorties252
3 жыл бұрын
To fix the cutting off the bottom of the play field couldn’t you adjust your computer’s overscan settings?
@cooltoy
3 жыл бұрын
In windows 10 you can not scale below 100%. In VPX you can adjust the table size though and prevent the bottom from being cropped, but honestly the cropped off portion is so insignificant to me it's not even worth doing that. I merely mentioned it just to be up front with everyone on the end results.
@Abrandnew3
2 жыл бұрын
If I buy a 27 inch monitor to install do I need to also buy a cable to plug in the monitor to the PCB?
@Zoyous
3 жыл бұрын
Can you connect this monitor to the stock A1up PCB?
@cooltoy
3 жыл бұрын
Not without using a specific LVDS to HDMI adapter board, and even then there is no guarantee it would perform correctly or look good. I would advise against it personally.
@strells
3 жыл бұрын
What are the specs (or link to) of the PC driving this (that fits in cabinet) and Atgames pinball mods?
@bdukes8075
2 жыл бұрын
I’m late lol but does anyone know if you can do this without using a pc and it still work?
@weatherfxx
2 жыл бұрын
It seems his first video doing this mod.. He had it all stock.. But the screen sat right close at the top.. Versus this method where he removed the stock PCB.. and he hooked up a computer allowing the screen to sit lower in the cab.. Check out his other video
@derekdesiena9392
3 жыл бұрын
Do you think it would fit if you leave the thin metal rim around the screen on after decasing the main plastic frame? I’m scared of cracking the screen without that on because of how fragile it is. It’s already a tight fit while loosening the sides. Seems like you need to be very delicate lifting the monitor to get underneath for access.
@cooltoy
3 жыл бұрын
only way to know for sure is to try it out
@TheNerdJockPod
3 жыл бұрын
Could you help me do this to mine?
@lucasgatward4286
3 жыл бұрын
What kind of pc do i need not wanting to spend alot
Пікірлер: 275