Thanks for sharing this, and sorry I'm late, seeing this. The blue dots you pointed out, are raster alignment markers. An arcade technician would use those when adjusting the raster, after many years of use, or after replacing the CRT monitor, so the image would look right. They'd widen, or shrink the raster, until the dots were just outside the edge of the bezel.
@EvrydayErik
2 жыл бұрын
Ah… good to know! 😎👍 I modded it with the GRS flight stick. Great cab!
@ChristiansCartoons
3 жыл бұрын
Authentic arcade wear and tear right out of the box.
@EvrydayErik
3 жыл бұрын
Hahaha! I have considered that to manage my ocd.
@EvrydayErik
3 жыл бұрын
I borrowed your phrase for my video tonight
@phillychick
4 жыл бұрын
Star Wars is my all-time favorite arcade game, and I always wanted to own one. It was a no-brainer Day One purchase for me; I bought mine back in mid-October. Although the yoke was a bit stiff out of the box, it loosened up over time, and I can get decent high-level play out of it. I still cannot believe Arcade1Up successfully pulled this off; I am forever grateful that they made one of my wildest dreams come true. 👍
@EvrydayErik
4 жыл бұрын
I agree! Great license! I think the yoke is holding up good. I’m impressed whatever board these used handles the vector graphics perfect. Just a great combination! I know they can do a Tron with black light!
@genx1144
4 жыл бұрын
Fun fact: the R2-D2 whistle and his other sounds were made by an ARP 2600 synthesizer.
@EvrydayErik
4 жыл бұрын
That’s awesome! Those sounds make me feel like a kid again and bring back the nostalgia.
@curbydinobot8633
3 жыл бұрын
@@EvrydayErik btw....i have the Star Wars stand up and i noticed the sit down version you have has gray trim while my stand up has blue trim...interesting i never noticed that till now
@richardg5301
3 жыл бұрын
Would rather have the 1998 star wars trilogy arcade but kind of cool still.
@EvrydayErik
3 жыл бұрын
Yeah that’s probably coming Once they have boards that can run it.
@longann7560
4 жыл бұрын
Blue dots we're there for the original vector monitor calibration my friend. Here, this is cut/paste directly from the owner's manual of the original arcade game: «Size and Centering Display While the game is in the Attract Mode, verify that a small blue dot is displayed within ‘/4 -inch of the edge in each corner of the screen. If the blue dots are not in the proper position, refer to the X/Y size and centering adjustment procedures included on the Analog Vector-Generator schematic diagrams»
@EvrydayErik
4 жыл бұрын
That’s cool! Thank you! I was freaking out. (As you can tell)
@longann7560
4 жыл бұрын
@@EvrydayErik Well you can relax now, blue dots are definitely there for calibration purpose only, and sincerely i wonder why Code mystic left them in there. They should have removed them altogether, they are completely useless on an LCD monitor. But, i'm also guessing they just couldnt take them out easily, cause these blue dots are part of the original code, so taking them out would mean messing with the internal coding and that was probably not part of their plan or schedule. And since they are aiming at keeping the original experience intact, they left everything that was in the game and that's a good thing as well. Youre unit is perfect beside that dent in your yoke which is weird cause this is a plastic cover, if theres a dent, is the dent only on your sticker of it goes through the plastic cover, check it out. Love the bench i wan't to get one for my unit if they become available, and as far as the blue LEDS goes, i might get a set on amazon, it will get the job done. If your does not work porperly just get a more quality one on amazon. Cheers !
@EvrydayErik
4 жыл бұрын
Long Ann thanks for the tips! Ya the blemishes army bothering me anymore. I got a ticket number going for a replacement light, because of the adhesive. The light actually did eventually work (my bad). Don’t shoot KZitem videos at 4 am. A1Up should sell the bench separate. It look a like they will be selling light marquees for the gen 1s. Maybe they are figuring out they are leaving money on the table.
@longann7560
4 жыл бұрын
@@EvrydayErik YEs the separate bench, i'm really looking forward to get one. They should sell a kit to convert this whole unit into a cockpit version with lexans on top and a full bench, that would be really cool. I don't care if it would be another 400$ i would jump on it right away. But hey, we can always dream. I'd like to make one but i had an overdose last year building my MK2 cab so no construction this year for me. I built a Mario Bros cab full size in 2017 and mk2 in 2019, so maybe a star wars cockpit for 2021 who knows. Cheers Erik ! I'l try to post a video when i have the time later this year.
@xxMarc21xx
4 жыл бұрын
L
@lionelwilliams1285
4 жыл бұрын
Nice video! It's time for 1up to create a remake of the Tron cabinet!
@EvrydayErik
3 жыл бұрын
Thanks! I will grab a Tron cab for sure. I ordered the pinball, we'll see what's up with that.
@Koldeman
3 жыл бұрын
I was a kid in the 80s & every Sat, after cartoons, mom would take me to the arcade at the mall - the "Gold Mine" & there's nothing like walking into a dimly lit, really loud, & really crowded arcade in the 80s, folks. Places like "Flynn's" in Tron absolutely were like that. Mom would give me $1 in quarters & I could make that dollar last an hour. I must have spent a fortune on SW, ROTJ, Indy & Temple of Doom, and Pac-Man. Those were truly the good old days.
@EvrydayErik
3 жыл бұрын
You made dollar last an hour?! Impressive! I hear you! Those were the days! Dave and Busters isn’t the same. You list some great games there! I am looking forward to a Tron and Dragon’s Lair cabinet!
@LEGENDCITYest1963
4 жыл бұрын
8:00 that rug really ties the room together
@EvrydayErik
4 жыл бұрын
Hahahahahaha!!! It really does.
@wadeskelton7585
4 жыл бұрын
He pissed on my f&$king rug man! I couldn’t stop admiring the wood floor 😀
@ace34473
2 жыл бұрын
I remember going to the movie theater where I grew up they had the return of the Jedi game in the ice cream parlor part of the theater and I must have pumped 100 in that thing as a child. That would be the game I would play the most.
@EvrydayErik
2 жыл бұрын
Oh wow, see I don’t really remember that game. I thought it sucked initially but I have to say I do end up playing it so maybe it’s growing on me.
@GojiraHarju
2 жыл бұрын
Again, big thanks for being a source to get no BS on build, quality, and play from someone who knows what the true-play should feel like.
@EvrydayErik
2 жыл бұрын
Hey! Thank you very much. Yeah I buy my cabinets. So I try to give you my honest reaction each time. This one is a pretty good one, I had no issues!
@HoneyGun
4 жыл бұрын
I wish they made a tall version of that so the seat and cabinet built up like if they were on risers. Other then that it looks great!
@EvrydayErik
4 жыл бұрын
That’s true, I’d would require a few more boards and dowel rods but they could have filled that empty box!
@mrnoreply2
4 жыл бұрын
I wish they made all there acrade taller
@EvrydayErik
4 жыл бұрын
master of the world I’m weird, I like sitting in a kiddy chair in front of them. But ya they could be bigger and show off the art more:
@mrnoreply2
4 жыл бұрын
@@EvrydayErik I feel u I got mines on a milk cart it I mean I would pay the extra money u know everything else could remain the same just make it taller like Actual acrade size far as the height and I am cool with that thanks for the reply
@poppopgoesthaweasel
4 жыл бұрын
Yeah its completely to short. I mean they could have spent the extra 2$ in wood to bring it up about 6 inches higher at least on the cab the seat it a good height. Mine looks funny next to my other modded final fight cab on a riser. I still dont understand why they first came out without risers? Was it so they could sell it for 200$ at walmart. Now the original risers are selling for over 200$ and some cleaver prople that took theirs apart and built some homemade risers with the same exact wood are selling for over 100$ its so strange. I mean its time for them to make a few changes like drop the included risers and make the thing a few feet taller. And please do something with the kick panel with the names of the games on it? They claim they want to look and feel like the real deal but i never saw a cabinet on a little square stand with a list of games in the front. Thats the first thing i do with my cabs. Call my vinyl guy and order the original graphics. Then it looks legit. I mean does anyone really screw their can into the riser? Come on guys take 5 minutes to redesign it now that were paying 5400$ - 500$ for any new cab now!!!!!
@warr1
4 жыл бұрын
The whole arcade is really cool, but the games are way too short, I would say this is a must just for collection.
@EvrydayErik
4 жыл бұрын
That’s true, the games are just repeat and eventually die. For me it’s the nostalgia on this one. My son loves it, so it’s a hit with the kiddos.
@phillychick
4 жыл бұрын
"Short" as the stages in each game are short? Well, yes...just like every other videogame released in the 1980's. But with some practice, the game play is not going to be as short. My longest game for Star Wars was over 3 hours (final score over 22 million), but I also had it set on 9 shields with 3 bonus. My games with the "default" arcade setting (6 shields and 1 bonus) typically last about 15 to 20 minutes.
@mutethelegend4339
4 жыл бұрын
There ment simulate the arcade so these games are ment to be played on sitting
@arihoyzn2781
4 жыл бұрын
I love the graphics on the first two games - they remind me of the old arcade Battlezone. The third one looks like a game straight out of Nintendo Super Famicom. Anyway, it's a great addition to your collection!
@EvrydayErik
4 жыл бұрын
I loved Battlezone! One of my favorites! Hmmm arcade1up are you there? Ya the third game is soft. Thanks for checking my video out!
@NemeanLion-
2 жыл бұрын
I loved Battlezone too. I bet you they could market it if they manufactured some kind of periscope. This would give the cabinet originality and make it very appealing to a collector.
@BryanJohnson1969
3 жыл бұрын
Arcade1up needs to make a Gottlieb cab with Qbert, Mad Planets, Krull, etc. Also Tron and Discs of Tron. I would also like to see a Williams cab with Defender, Stargate, Robotron 2096, Sinistar, Joust, Bubbles, etc. I would love the choice of a Sinistar cab or maybe Robotron 2084.
@EvrydayErik
3 жыл бұрын
Yeah you were naming all the cabinets I want. I definitely want Qbert and Tron. Some of the Williams ones you mentioned, our rumored to be in an upcoming Mortal Kombat to 12 in one cabinet. I’m probably going to get that one to replace the Mortal Kombat I have. No word on Robert Tron but that is a great game. I also love berserk. Cheers! Great thoughts!
@JeffMercedesC
4 жыл бұрын
Looks like the Light Up Marquee game logo is still slightly off-center just like the stand up version of this cabinet. I called Tastemakers about this issue when I noticed it on my Star Wars arcade cabinet back when they were released in October. They told me the marquee is supposed to look like that, and then killed me with kindness by saying happy gaming. Oh well I'm still a fan and I own 8 Arcade1up cabinets. I'm really looking forward to the release of their Pinball machines around Christmas!
@EvrydayErik
4 жыл бұрын
Oh no, I’ll have to research that. Another thing I’ll be OCD about. Ya I’m intersected in that pinball. I’d love to see a demo of it first.
@74drat
2 жыл бұрын
Really wish I wasn't late on these. Can't find them. Just start collecting 1 ups so keeping fingers crossed I find one
@EvrydayErik
2 жыл бұрын
This one is one of the best. Craigslist or eBay will probably hook you up one day. A1 up is notorious for releasing their cabinets with upgrades, no announcements on this one yet but you never know! Good luck hunting!
@josephrothberg2563
3 жыл бұрын
The Little blue dot is the Pale Blue Dot. Taken of Earth from Voyager 1 Feb. 14th 1990 at a distance of ~3.7 billion miles. Why there is four of them, IDK? No. I don’t know. That’s odd. I’m buying one soon. Will be my third. Turtles and Marvel vs Capcom, just sold my Marvel SuoerHereos. Now buying this soon. I also have the 1/6th cabinet DragonsLair hooked up to a 24” monitor. I also saw the Flynn’s neon light a few weeks ago, love it, but pricey for where I found it on eBay. I will say anyone buying this StarWars w/bench, get it from Walmart. Like $170-$200 cheaper then anywhere else I’ve seen it.
@EvrydayErik
3 жыл бұрын
Maybe it's multiple "earths" like Battlestar Galactica? Or Kobal. I can't wait to get an A1up Dragon's Lair!
@killerklown79
3 жыл бұрын
I was worried about the bench side boards scraping the sides of my outrun cab. What i did to fix it was to get some felt squares and glue them on to prevent scrapping. 88 cents and no scrapes!
@EvrydayErik
3 жыл бұрын
Awesome idea, thanks for sharing. This is still one of my favorite cabinets! They did a hell of a job on this one.
@killerklown79
3 жыл бұрын
@@EvrydayErik same here i bought the stand up one on sale at walmart. I'm hoping they do s.w. trilogy.
@EvrydayErik
3 жыл бұрын
That would be a great one, I think they’ll get there one day.
@WaltCo
4 жыл бұрын
I wish they would release the SEGA Star Wars trilogy that came out in the late 90's. That one is still fun today and still looks great
@EvrydayErik
4 жыл бұрын
I think when A1up gets their hands on some affordable hardware to run it, they will!
@WaltCo
4 жыл бұрын
@@EvrydayErik What makes u say that? I love the old school one you have also. It's very nostalgic and iconic. I just have a feeling it'll end up being more decorative than actually played by me
@EvrydayErik
4 жыл бұрын
Walter Costescu That seeing a trilogy game is a three dimensional game, I think that they mentioned three-dimensional games are going to require beefier hardware.
@WaltCo
4 жыл бұрын
@@EvrydayErik Oh I know that, but have you heard anything about it? Either way, it's a great machine you got. I'm so tempted to get it. Does it feel solid?
@TheGorillafoot
2 жыл бұрын
Had a lot of fun playing that in the arcade as a kid
@EvrydayErik
2 жыл бұрын
Me too! This is one of Arcade1up’s best cabinets. If you don’t have it, I’d recommend it.
@sammienochez8497
2 жыл бұрын
The future finally gave us our very own arcade
@EvrydayErik
2 жыл бұрын
It really did! If I could bring the 10 year old me into the future and show him my place, he would be very happy! Now I think about it, I don’t think I grew up past 10 anyway.
@jaypeve
4 жыл бұрын
They need to make a Tron machine with all the Tron games, Robocop, Kungfu master, QBERT, Yie ar kungfu, Sonic1,2,3, Contra 1,2,3, pole position, excite bike, hang on, after burner, Donkey Kong, Spy Hunter, Double Dragon, Street of Rage, Ninja Gaiden
@EvrydayErik
4 жыл бұрын
There are some good games there. I’m down for spy Hunter, a donkey Kong cab with a few versions. I think Tron would have to have disks of Tron for sure. I’m lucky my Pandora box has the two Robocop games so I get my fix there. It is fun to learn what they will be up to next.
@jamiemayer
4 жыл бұрын
First off on the lights there are two arrows that you have to line up before plugging them into each other. If you don't have those lined up, your reversing the polarity and that's most likely why you have the result of not having the one strip working. As far as it not sticking I ran into a similar problem. What's happening here is your pulling the adhesive with the backing paper off of the LED at the same time. What you need to do is put the adhesive tape back onto the LED. Then the way it came rolled you want to get a baby pin or perhaps a toothpick and look for one of those wrinkles in the backing paper and insert your toothpick or pin whichever slowly pull up and the problem is rectified. Something to protect your arcade cabinet itself from the bench. I took 2 thin pieces of Styrofoam from the packaging,then placed it between the cabinet in the bench on both sides. This will protect it from scratching the bench and the cabinet.
@EvrydayErik
4 жыл бұрын
Thanks! Ya, you were right about the arrows, it was late. The adhesive was tricky, but I got new parts sent. I like the idea with the foam. I'll admit I packed up the bench and stores it to make room for NBA jam. I should have the review up saturday. Let's play.
@jamiemayer
4 жыл бұрын
@@EvrydayErik I should be receiving my burger time tomorrow limited if only 3075 made I also just ordered frogger Just built an arcade in my basement for my very young children I'm almost 50 years of age I grew up in the South hills of PittsburghPennsylvania we had an arcade out our way called Tilt Wanted to share those fun times with my children that are so young There are favoring the arcade machines even over the Xbox one We have a total of 12 Pac-Man, space Invaders, Galaga, asteroids, final fight, mortal Kombat, teenage mutant Ninja turtles, marvel superheroes, Star wars bench, Street fighter, Burger Time, frogger
@FantasyfootballRedd13
3 жыл бұрын
Dude I love watching this, I always laugh at how you question yourself or answer your own questions! Makes for bonus fun, not just a boating set up video 👍
@EvrydayErik
3 жыл бұрын
haha, thanks! I'm in my office now talking to myself. Next up will be the Attack from Mars pinball!
@Sega_is_all_i_cd
4 жыл бұрын
I had the impression that the bench attaches to the cabinet. But this better when it come time to moving the cabinet.
@EvrydayErik
4 жыл бұрын
ya, it is completely separate and you can just move it around. My NBA Jam Limited Edition review is up tomorrow!
@jaypeve
4 жыл бұрын
They need to have an arcade cabinet with Phoenix, Arkanoid, Fix it Felix
@EvrydayErik
4 жыл бұрын
I forgot about Phoenix. I remember that one being fun. It combined a lot of different aspects of games. I don’t think I have it on my Pandora box. Good call.
@Fungib1e
4 жыл бұрын
Aw damn. I got the original version, but now I want the new one. Not for the bench, but for the new hyperspace transition scene. The current one is ok, but they made it shake side to side. That’s just wrong. Maybe A1up can update it using that new fancy schmancy usb port they installed into the board.
@EvrydayErik
4 жыл бұрын
I totally hear you, that sucks. They really should put that port to use! There’s no good reason why the software should be different. Very frustrating!
@longann7560
4 жыл бұрын
You should be happy ! Arcade1up included a brand new intro scene for this version, i don't have the hyperdrive sound that you hear when you choose your game then it goes to a light speed sequence. The stand up version only shows a starfield without sound. In yours we hear the millenium falcon going into hyperdrive with sound and coming out of lightspeed all with sound effects, that's neat. And that pisses me off. Good for you.
@EvrydayErik
4 жыл бұрын
I feel ya, I bought the MK cabinet when it came out and viola, newer versions with the light up marquee arrived a few months later. (I bought them). We will probably get a bunch of upgraded pac mans before it’s done too.
@longann7560
4 жыл бұрын
@@EvrydayErik Yeah, believe it or not, i wanted MK2 so badly, but I live in Canada and A1up did not release MK2 back in april 2019 like they did in the US last year. So instead of waiting, in june 2019 i got pissed, and I said to myself, FU A1up, and found the original MK2 cabinet plans on the internet and used a CNC router to cut out the original full size arcade cabinet panels in order to build one myself. It took me 5 weeks to assemble it, paint it and put on the artworks, marquee and all that, and i installed a pc inside running Mame. So that was it for me, now i have my original full size MK2 cab with 300 + games in there. In the end it just cost me more money and time but it was worth it. Then I saw that A1up Costco version later on too with the light up marquee, and yes i would have been pissed off as well. That's the way it is i guess. I could not wait for Star Wars though so i jumped on it as soon as it was on pre order and got one in November last year. Been playing with it ever since. Enjoy your cab. As far as i'm concern, if they only changed the intro sequence its really no big deal, even though its much cooler i agree. I don't think they upgraded or changed anything related to the games so we're good. Thanks great vid !
@Brunobi02
4 жыл бұрын
I am happy for you but sad that I don't have that cool sound and transition on mine as well :(
@longann7560
4 жыл бұрын
@@Brunobi02 Yes i'm not alone i guess, I just hope they didn't upgrade anything else related to the games, i also noticed that in the menu, they changed the color when you highlight the empire strikes back, mine is definitely yellow, and this one is now green. No big deal i know, i'm just being very nitpicky but like i said, hope they did not change anything else. Still a great unit though.
@EvrydayErik
4 жыл бұрын
Brunobi02 that sucks, I don’t know why A1up doesn’t perfect the game the first time.
@wonderbread9038
3 жыл бұрын
The cabinet looks great!
@EvrydayErik
3 жыл бұрын
Yeah it’s a really good one, I have a bunch of new ones on pre-order but they’re just not here yet. Looking forward to getting the Mars attacks pinball for a review.
@candoentertainment9118
4 жыл бұрын
Got the stand up cabinet in November. Bought the matching stool last month.
@EvrydayErik
4 жыл бұрын
Where did you get the stool?! I didn’t know they made one.
@candoentertainment9118
4 жыл бұрын
@@EvrydayErik ordered it of Walmart.com $80.
@dennismcdonald2607
4 жыл бұрын
It would be nice if they sold a conversion kit for owners of the stand up.
@EvrydayErik
4 жыл бұрын
I agree, there is no reason why they can't sell the bench separately! Stop by this week, I'll review NBA Jam and their online gaming service.
@kennyjones6369
3 жыл бұрын
No for as much as you paid for this i`d be PISSED OFF TOO
@EvrydayErik
3 жыл бұрын
It's all good now, It's still my favorite cab
@JohnnyC-Retro
4 жыл бұрын
I think some black, adhesive craft felt on the inside of those bench "arms" would help prevent any scraping of the artwork on the side of the cab. Just a thought for ya. Thanks for the review!!
@EvrydayErik
4 жыл бұрын
Thanks John! Sold! that is a great idea. Honestly, maybe that’s my next video! If I do it I’ll give you a shout out.
@JohnnyC-Retro
4 жыл бұрын
@@EvrydayErik No problem! Glad to help! :-D
@acidburn7683
4 жыл бұрын
Perhaps you could put some felt on the inside of the bench where it meets the cabinet to stop any scratching.
@EvrydayErik
4 жыл бұрын
Ya, that's a good idea! If you are going to move it around at all I would totally do that.
@john2001plus
4 жыл бұрын
I used to enjoy Return of The Jedi back in the day. I had huge trouble putting together my standup Star Wars Arcade1up, but once completed I love it. I feel like standup is the way to go. Smaller footprint.
@EvrydayErik
4 жыл бұрын
I had trouble putting this one together to when it’s on it’s side and you try to put the other side panel on. There was a lot of figit with. The bench isn’t all that necessary, but it does make it stand out. But ya, it’s more space going by by.
@john2001plus
4 жыл бұрын
@@EvrydayErik Since the mid 70's I have played arcade games standing up. Because of my profession, computer programmer and videogame programmer, I am too sedentary already, so playing while standing up makes me less sedentary.
@john2001plus
4 жыл бұрын
@@EvrydayErik Putting on the second side was a big problem for me too. I wrote this: I bought the Star Wars Arcade when Walmart had that package deal with the Robot for $350. I had much more difficulty building this one. My step-dad usually helps me. He is 83 and I am almost 60, so we are not real fast. It usually takes us a while. The problems started when we tried to attach the second side. We couldn't get anything to line up properly, so later I attempted this on my own. I started with the lower front and worked my way around the bottom and up the back and finally the light-up marquee. Often I had to loosen screws that I had already put in to adjust it so that I could get the next screw to line up. Then I had big problems with the marquee getting it to line up. However, the biggest problem was attaching the display panel to the second side. The holes did not line up at all. It was like the cabinet was slightly too wide. I had to remove the plastic brackets from the display panel, attach them to the side, and then reattach the display panel. The trouble was that the most I could get were 3 of 4 screws in each of the two brackets, which is probably good enough to hold it forever. I had trouble with the display brackets with the other two arcade1up's I built, but they weren't near this difficult. My total build time was around five hours. I spent well over an hour trying to get those display panel brackets to line up, and I spent quite a bit of time trying to get all the other holes to line up. So was it worth it? This was my all-time favorite arcade game, so I definitely wanted this one. After playing a couple of games, my feeling on the yoke controller is that it might not be as good as the original but close enough to have fun with it. I feel like the buttons take more effort to press, and this is where I started to have a problem. I absolutely loved this game in the 1980s when it was in the arcade, but the last time I would have had an opportunity to play it was around 1990 give or take a couple of years. That was 30 years ago. I was 30 years old then, but now I turn 60 in three weeks. I found my fingers getting sore from all the button mashing on just a couple of games, so I am wondering if the buttons really do take more effort to press compared to the original arcade? I may have to limit how much I play if my fingers bother me too much. However, I also figure that this might be good exercise for my hands. I am happy to have the Star Wars Arcade. I'm sure that I'll have some fun with it.
@fiolaja
4 жыл бұрын
@@john2001plus I also had a terrible time putting that second side on. It added another hour to my setup time. I'm hoping this is not the new way of building these, because I have Pacman 40th and NBA Jam on the way. I also had screw misalignment on the yoke that caused problems. Other than that I love it and it my nicest cabinet so far with my Marvel Super Heroes Collectors addition running a close second.
@phillychick
4 жыл бұрын
One of my brothers used to play Return of the Jedi, and became pretty decent at it. Not me, I completely suck at that game. 😜
@ajakarr
3 жыл бұрын
Nice video love your OCD issues. I may get this for Christmas for the kids I have Pac-Man miss Pac-Man and space invaders, one thing I may try so the seat does not rub the cabinet is the little felt square pads you can get for furniture I may put a couple at various locations just to prevent any scratching just something I was thinking about again great vid thanks
@EvrydayErik
3 жыл бұрын
Thanks! That’s a great idea! I’ll probably do that to mine. You have some great cabs. Ms Pac Man is great! I’ll be ordering/reviewing the Attack from Mars Pinball next!
@bp1208
4 жыл бұрын
Had a few good laughs with your review...thanks alot! Now that you mention it I also have the blue dots on my stand up model. Yeah...I haven't purchase a cabinet yet that didn't have multiple cosmetic problems. Looks like that might always be the case. It tells you everything about the company when they can't put their product in a protective shipping box...pathetic really. Done with Arcade1up:(
@EvrydayErik
4 жыл бұрын
I enjoy it now that it’s all assembled, but it is always very stressful unpacking the pieces and assessing the damage. I have to say the actual screen is perfect and that is the first time I’ve had that happen. I think I’ll pick up maybe one a year, the special ones. Most of their games are on the Pandora box 6 and I have that. Thanks for checking the video out and leaving a comment
@yellow98gt
4 жыл бұрын
I'm done with ArcadeFUp as well
@jumbosinbad360
4 жыл бұрын
Pre-ordered mine today for release in the UK in November. I can't wait! Thanks for the video.
@EvrydayErik
4 жыл бұрын
Cool! You are going to love it! My Walmert NBA jam order got delayed. Hopefully soon.
@shadowninja1474
3 жыл бұрын
I have 7 arcade1up cabinets. Every box from different stores looked like they were 10 years old, and been through a war.
@EvrydayErik
3 жыл бұрын
Hahaha! Yep, those early ones looked taped and retaped. Beat to hell! It’s a little better recently. Collecting these is fun. Waiting for Mars pinball.
@shadowninja1474
3 жыл бұрын
@@EvrydayErik Same here, I have a feeling it's going to be great.
@maddmig3598
4 жыл бұрын
Wow bro although a nice cabinet you got a pretty banged up unit. I think its unacceptable considering you paid good money for it. I have the stand up cabinet and thankfully didn't have any blemishes. But a great cabinet tho 👍
@EvrydayErik
4 жыл бұрын
It’s a great cabinet, once it was all together, the blemishes weren’t bothering me. It’s just nerve racking opening it up. Maybe arcade1up will send me some new let’s.
@drcooljk
4 жыл бұрын
Mine just came in the mail I setup it up,i am 6"8 tall, I can sit comfortably and play.
@EvrydayErik
4 жыл бұрын
Awesome! People asked me this! You are proof it works! Enjoy!
@Rob.Coleman
4 жыл бұрын
Too any mid-roll adverts! I got bored when the 3rd was about to kick in so switched off and found something else to watch. Shame really, I was enjoying it up to that point.
@EvrydayErik
4 жыл бұрын
well, sorry, come back for Marvel pinball
@brianwilson2538
3 жыл бұрын
This is being delivered tomorrow, I’d freak out with any blemish , so you are right OCD , for the money
@EvrydayErik
3 жыл бұрын
Lol, thanks! I give you the good, the bad and the ugly. No free cabs for Evryday Erik. This is a great one! You’ll love it!
@brianwilson2538
3 жыл бұрын
Did u ever get a tron or Dragons Lair?
@FreeFitCoach
4 жыл бұрын
awesome video! i have the stand up version and it is awesome. I too had some quality control issues with screw alignment and fit but all in all was fine. so the LED strips for the back needs to be powered and turned on and off separately? that's kind of odd.
@EvrydayErik
4 жыл бұрын
Thanks! Ya it’s a separate switch and another power outlet used unfortunately. Time to buy another power strip. They are cool though! Did you pick up anything else this year?
@dennismcdonald2607
4 жыл бұрын
This ABSOLUTELY pisses me off! Bought the standup one! I'm 6'3" though lol
@EvrydayErik
4 жыл бұрын
I hear you, I keep selling cabs when they upgrade or add on to new releases. Drives me crazy.
@Sega_is_all_i_cd
4 жыл бұрын
😂 but you can always sit back and wait to see what comes out.
@moogooguypan8574
4 жыл бұрын
You should hit up customer service and see how much it would cost to add the bench!
@dennismcdonald2607
4 жыл бұрын
@@moogooguypan8574 I think that's a great idea! I kinda want the upgraded board that came with the full version as well as a back up so I may just do both at once.
@natekong3596
4 жыл бұрын
Still debating to get the seated or non-seated version. I feel like I might hurt my back if I have to hunch down to play while sitting on the seat.
@EvrydayErik
4 жыл бұрын
I’d go with the seat, it just looks cool and stands out next to the rest. The seat isn’t giving me any trouble. If you put all of yours on risers, I could see getting the riser for consistency.
@MattsCollection
3 жыл бұрын
I'm getting the Stand up version, but I purchased a matching stool.
@arcaderacer586
4 жыл бұрын
Now I know who sends back all the items they order online! Its the everyday Eriks!!! LOL.
@EvrydayErik
4 жыл бұрын
You got me!
@tamig.7969
2 жыл бұрын
Would a couple strips of black felt tape on the inside of the seat help with keeping the seat from scratching the cabinet ?
@EvrydayErik
2 жыл бұрын
Yes, something like that would help. It’s a great cab!
@BMoney77
10 ай бұрын
I can’t find this online anywhere. All I see is just the cabinet. I’d love that bench.
@EvrydayErik
10 ай бұрын
I’m actually selling the bench. If you’re interested, respond here. evrydayerik@gmail.com.
@EvrydayErik
10 ай бұрын
Or we can chat on my instagram. I bought a regular riser for it, so I was going to put the bench on Ebay soon.
@BMoney77
10 ай бұрын
@@EvrydayErik I don’t have instagram. I’ll shoot you an e-mail but yeah I definitely want it. My wife just bought me the cabinet for Christmas and I’ve searched everywhere for the bench!
@BMoney77
10 ай бұрын
Make sure you get the right riser. I believe the cabinet you have is smaller in dimension than the new one that’s out. For instance the cabinet I just bought is 20” by 20”. I believe the one that came with the bench is 19.75” by 18.75”.
@EvrydayErik
10 ай бұрын
OK, I’ll have to look into that. I have my cabinet on a generic black arcade one up riser and it works OK. I have the bench disassembled.
@foryasoul71
4 жыл бұрын
Turn the wires around on the led
@EvrydayErik
4 жыл бұрын
Hey! I did flip the connectors and it worked! Good call. Thanks for watching and helping!
@sebastiencomeau3048
4 жыл бұрын
@@EvrydayErik I was going to say the same thing. They don't work when plugged in flipped.
@EvrydayErik
4 жыл бұрын
Sea Bass ya, I flipped some more and it worked. The adhesive is still gone though. I think it was 3 am when I filmed that part and was hallucinating
@sebastiencomeau3048
4 жыл бұрын
@@EvrydayErik I have ordered other brands of led strips and unfortunately none stick to the slippery surface of Arcade1up's mdf. I ended up putting regular transparent boxing tape over the strips. Even boxing tape doesn't stick that good on it. Arcade1up will need to come up with screw on led bars. And not roll up strips.
@JeffMercedesC
3 жыл бұрын
Evryday Erik- I pre-ordered the Outrun arcade cabinet. There is a lot of negative comments and speculation leaning towards the arcade bench seat that it will not be comfortable for long periods of gameplay and a average size adult will have to hunch over just to be able to play it. Are you able to sit up straight and play comfortably for long periods of time?
@EvrydayErik
3 жыл бұрын
Yes, I was surprised how much I liked it. I was comfortable and had leg room. Sure, a real seat with a back would be better, but that would be more $. I think car driving games would be best served by a proper seat for the feel and effect but again more $. Maybe A1up could add a padded seat back to this seat.
@1teamski
4 жыл бұрын
Dragon's Lair for sure!
@EvrydayErik
4 жыл бұрын
I suck at that game..... I must have it!
@1teamski
4 жыл бұрын
@@EvrydayErik I think it is one of the worst games ever, but also the best looking. I also must have it.
@TheXtremeChannelMrX
3 жыл бұрын
Fantastic review. Really on the fence for this piece
@EvrydayErik
3 жыл бұрын
Hey, thank you very much. Ya, This and NBA jam are perfect cabinets. I’d recommend you pull the trigger. Next up I’m going to review the attack from Mars Pinball hopefully soon.
@TheXtremeChannelMrX
3 жыл бұрын
@@EvrydayErik I have NBA. Just never play it lol
@EvrydayErik
3 жыл бұрын
Lol, You know I didn’t played as much as I thought I would either. And when I did I got my butt kicked.
@amoshumphrey1136
2 жыл бұрын
Impressive most impressive 👍
@EvrydayErik
2 жыл бұрын
Haha! Yeah, this is one of their best. I don’t have any complaints!
@TeamVVV
4 жыл бұрын
Great video, enjoyed that! I'm just over 6'6" so the cab is definitely a bit low for me, can I use the riser with the seat? I'll likely then be a bit low, but it will be authentic, I was likely 4' tall when playing it regularly back in the day.
@EvrydayErik
4 жыл бұрын
Hey thanks! Good question, I think the riser may lift the cab too high for using the bench. you could probably build some custom solution. This cab really does take me back to the old arcade days.
@afterglow-podcast
4 жыл бұрын
Saved enough to buy one. I wish it was 400, for like a week it was 400 at Walmart online for preorder. Still, think I want a unique sitdown cab more than NBA jam
@EvrydayErik
4 жыл бұрын
I was lucky and Walmart gave me the price adjustment automatically on my prepared. NBA Jam is coming tomorrow from Best Buy. (Review to follow) I can’t wait to play folks online. You getting it?
@afterglow-podcast
4 жыл бұрын
@@EvrydayErik I'm skipping NBA jam due to room. It's a maybe if I find it on a deal, but for 400 it's a pass. I need room for the one of the pinball machines coming.
@EvrydayErik
4 жыл бұрын
Chris Leathco I hear you.I’m definitely picking up that marvel pinball
@gameroomgoodies1571
4 жыл бұрын
Your led connector is clearly plugged in wrong, lol. There are literally arrows on it showing you which way to plug them in, and the arrows aren't lined up
@EvrydayErik
4 жыл бұрын
Thanks, you are right. I was tired and had a few.
@gameroomgoodies1571
4 жыл бұрын
@@EvrydayErik Haha, glad you got it fixed
@robwhigham1717
3 жыл бұрын
Great video...thanks!
@EvrydayErik
3 жыл бұрын
Hey, thank you for checking it out. It’s a great cabinet.
@wolverinescratch
3 жыл бұрын
What was that Arcade machine John Connor was playing in T2: Judgment day?
@EvrydayErik
3 жыл бұрын
Missile command. I’ll admit, I had to look that up. I’m hoping to have my Atari 12 and one cabinet soon and play missile command at home.
@wolverinescratch
3 жыл бұрын
@@EvrydayErik cool game
@8589brian
3 жыл бұрын
I thought the 4 blue dots were for calibration purposes to centre the yolk
@EvrydayErik
3 жыл бұрын
Thank you, yeah I think that is what it’s for. I’ve bought so many cabs (had a few issues) that I’m paranoid when I open a new one up.
@wmiekka
3 жыл бұрын
For original machines, the 4 blue dots are for adjusting the image size on the original vector monitors. Calibrating the yoke is done on a separate screen in the test menu as well. I’m not sure how the 1up versions handle the calibration.
@The_Bad_Guy.
4 жыл бұрын
I hope they obtain the rights to the Simpsons and release the 4 player Simpsons arcade from the early 90s. I would buy that in a second. And also I can't believe they never released the X-Men arcade game! They have multiple X-Men cabinets but not the multiplayer beat em up! That's another one I would buy in a second. Now I get theres no way they could pull off the 6 player game but they could do 4.
@EvrydayErik
4 жыл бұрын
I agree! Those are 2 cabinets screaming to get made. I love that x-men game. I’m picking up marvel pinball next and will wait for new announcements in early 2021! Thanks for checking things out!
@The_Bad_Guy.
4 жыл бұрын
@@EvrydayErik look forward to it brother
@phillychick
4 жыл бұрын
You used the Force! YES! 👍
@EvrydayErik
4 жыл бұрын
Haha! I did! Not on stage 2 yet.
@Mysteryz-un6cw
4 жыл бұрын
Great review, totally dig the room. Where oh where did you get the awesome FLYNN'S neon light? I love that throwback to Tron. I think if you have the space for the bench version, than by all means go for it! I'm strapped on space and had to get the stand up cab. Great video! Thanks!
@EvrydayErik
4 жыл бұрын
Hey Thanks! I got it from ebay, over sea seller. Oh ya space is tough, I'm actually selling the NBA jam to make room for the Marvel Pinball. You know a Tron cab must be on the horizon.
@Charmander009
4 жыл бұрын
First everyone wanted to stand up and play cuz “that’s how it was in arcade” now everyone wants to sit and play
@EvrydayErik
4 жыл бұрын
Haha, I’m a sitter from day one. I have video proof. I’m really lazy.
@thedollarbox
4 жыл бұрын
this game was always a sit down cabinet in the arcade
@OzzyMoto2K10
4 жыл бұрын
ptetapi negative
@DarthTony
3 жыл бұрын
have had mine since February and I its holding up well even with a lot of use
@EvrydayErik
3 жыл бұрын
Cool! Glad to here it! It’s a great cab. Mine has no issues either. I’m looking forward to picking up a lot of new cabs in 2021!
@DarthTony
3 жыл бұрын
@@EvrydayErik I'm waiting for pre order to start on X-Men
@leeparker7692
4 жыл бұрын
enjoyable review thanks
@EvrydayErik
4 жыл бұрын
Thanks for stopping by! Appreciate it!
@pyrotonyfireworks6640
4 жыл бұрын
I got the older and mine came great
@EvrydayErik
4 жыл бұрын
That's good! My screen was perfect, that's the best part! I can overlook the other stuff. Hope your still liking it!
@Tee-qc2cy
4 жыл бұрын
Great video, what is the full length of the cab with bench attached? Want to make sure I can fit it where planned . Thanks
@EvrydayErik
4 жыл бұрын
Thanks, it depends. Take the bench measurements and add another 20 inches for the actual main cabinet. But It really depends on where you want to have the bench. I actually took the bench apart because NBA Jam is here Friday. Sorry I couldn't be more helpful.
@EvrydayErik
4 жыл бұрын
Thanks, it depends. Take the bench measurements and add another 20 inches for the actual main cabinet. But It really depends on where you want to have the bench. I actually took the bench apart because NBA Jam is here Friday. Sorry I couldn't be more helpful.
@Tee-qc2cy
4 жыл бұрын
Thanks Erik, found a place for it now just have to wait until November when it's available in Ireland. Enjoy the NBA cab, it looks awesome
@emmanuelledaavila8321
4 жыл бұрын
Ah c'mon stump lol great review. These cabs are beautiful. I'm looking forward for the golden axe cab.
@EvrydayErik
4 жыл бұрын
That freak’n stump still got me! I have golden axe on the pandora box, but it’s really tempting. The cab design looks good. Hmm...maybe I should.
@The_Bad_Guy.
4 жыл бұрын
You aren't being crazy by picking out the flaws in your cabinet. For 500 dollars it should be perfect. I did the same thing with my tmnt cabinet. The box was rough which concerned me and the cabinet, although almost perfect, was not. A few minor dings. I didn't like that. I just bought the star wars one with bench. And for 500 dollars, it better be damn near perfect or it will be returned. And I was wondering if the seat would rub the art off the console itself. Looks like it would. I'll just have to be careful moving it in and out. Or maybe permanently attach it to the cabinet with a few screws.
@EvrydayErik
4 жыл бұрын
thanks! I'm still looking at that TMNT cabinet (possible future buy). Certain blemishes and scratches drive me nuts. Those gen 1 cabs were rough. They are getting better and I have had good experiences with customer service. The seat won't be an issue, but I have a 5 year old. I'm getting the marvel pinball for sure and I think 2021 is going to get my wallet. (new MK machines and light gun stuff)
@The_Bad_Guy.
4 жыл бұрын
@@EvrydayErik the tmnt is the first cabinet that I bought. But I heard they have made vast improvements since the first ones came out. I was actually extremely happy with the tmnt game. Loved that game ever since I was a kid and when I saw it was coming out I pre ordered it the first day.
@Ur2ez4me81
4 жыл бұрын
I lol at the part where u sit & shit yourself on that new arcade lmao... Good one!
@EvrydayErik
4 жыл бұрын
It happens! NBA jam next week!
@raysalas4258
4 жыл бұрын
I have the dots as well, cool video. Maybe you can buy a stand up version and compare them both like you did the Walmart and Costco Mortal Kombat cabinets. 😁
@EvrydayErik
4 жыл бұрын
Lol, that’s tempting. Glad to hear about the dots. How come I have a feeling arcade1up will come out with yet another Mortal Kombat machine, I’ll compare MK cabs, again!
@EvrydayErik
4 жыл бұрын
I was playing this thing as soon as I got the cabinet built and sat on a stool, You really don’t need the bench, it’s more a personal choice, something different.
@raysalas4258
4 жыл бұрын
Looks really cool, nice of you to let people know about the scratches that will eventually happen when moving the bench back and forth.
@EvrydayErik
4 жыл бұрын
Ray Salas thanks, I think if you’re just careful you’ll be fine but unsupervised kids might do some damage.
@curbydinobot8633
3 жыл бұрын
Where did you get that Salacious Crumb....not sure if i spelled that right
@EvrydayErik
3 жыл бұрын
I got him at galaxies edge last year right before they closed due to Covid. They should still have him and he comes in a blue color as well. He has a little switch that turns his head and makes him laugh. I think it was 50 bucks it’s pretty cool
@ChicagoFaucet.etc.
4 жыл бұрын
I'm seriously considering getting this, but my one main concern is the height of it. You stated that you are six feet tall, and that it was comfortable to play, but how did it feel sitting close to the ground, looking down at it, and being hunched over? I'm 5'9", so if you say that you were comfortable playing it, then that is good for me, but it is my main concern.
@EvrydayErik
4 жыл бұрын
I have no trouble. I’m not a fan of standing and keep all my cabs without the riser. I use a small kids chair when I play on them. It’s not a game you sit for hours and play at one time. Works for me!
@PandaG051
4 жыл бұрын
That’s such a cool game I wish I had that!! 😃😃😃😃😃
@EvrydayErik
4 жыл бұрын
Thanks! It’s definitely fun! Stay safe!
@johnny_boy79
4 жыл бұрын
That thing would be sicc if it were the Sega trilogy
@EvrydayErik
4 жыл бұрын
I’ll bet arcade1up is trying to make that happen. That would be suite. I’d like to pod racing game I played at Dave and Busters.
@johnny_boy79
4 жыл бұрын
Evryday Erik You should just mod it bro. I’ve seen a couple videos of it. I’m no expert on cabs, but the modding doesn’t seem all that hard or expensive.
@EvrydayErik
4 жыл бұрын
Johnny from LA I’ve been tempted! I will have to soon out of necessity!
@johnny_boy79
4 жыл бұрын
Evryday Erik DO IT, DO IT!😜 Would make a great video.
@Mike_VH
3 жыл бұрын
Cabinet is the same size as the single no seat version right? If I wanted to buy this and not use the seat but pick up a riser it would fit?
@EvrydayErik
3 жыл бұрын
Yes, you are correct! For space, i’m not using the bench now and instead I am using a toddler chair to make it easier for my son.
@Mike_VH
3 жыл бұрын
@@EvrydayErik Awesome. Thank you!
@willsfather1
3 жыл бұрын
Need a link for this new star wars machine.
@EvrydayErik
3 жыл бұрын
Sorry, I did this one last year it looks like it’s sold out in a lot of places.
@EdTheNerd
4 жыл бұрын
Would love to see some highway pegs on it lol
@EvrydayErik
4 жыл бұрын
hahahah! old school rebel.
@JohnMOTU369
4 жыл бұрын
great cab i want one yet cant find it any where
@EvrydayErik
4 жыл бұрын
You can get it on the Walmart website! NBA jam review next week!
@thx113875
5 ай бұрын
Is that strip a completely separate switch
@EvrydayErik
4 ай бұрын
Yes, the light strip doesn’t come on automatically with the machine. It’s a separate switch. I just leave mine on all the time.
@rickcamp7807
3 жыл бұрын
No risers? Wouldn't play unless on my knees
@EvrydayErik
3 жыл бұрын
They just did a similar thing with Outrun.
@rickcamp7807
3 жыл бұрын
@@EvrydayErik Star wars was great but those other machines without the risers must be for the kids.
@shadowninja1474
3 жыл бұрын
Just one question if you could help. When you have the bench pulled out where "you" sit in it. What is the total depth dimension from back of cabinet to the furthest back point of the bench. I am trying to figure out if it will come out too far in my room. I would appreciate any help you could give.
@EvrydayErik
3 жыл бұрын
I don’t have the bench in front of the cabin anymore, in the video I do show the length of that bench. The cabinet itself is a standard Arcade1up cabinet otherwise. You could probably just add them both up and get an idea
@shadowninja1474
3 жыл бұрын
@@EvrydayErik No problem, thanks for replying.
@lennardchattic4818
4 жыл бұрын
Unit is bang up but is it worth taking back down those stairs
@EvrydayErik
4 жыл бұрын
Haha, I’ll keep it and just complain. It’s a fun cab, new A1up announcements tomorrow, maybe I’ll do a video so we can talk about it.
@NOCTURNUSFROST
3 жыл бұрын
Epix
@EvrydayErik
3 жыл бұрын
😎👍
@GadgetMartian
4 жыл бұрын
Great how you can set additional options for each game!! Seat looks well made! Is it still holding up??
@EvrydayErik
4 жыл бұрын
Ya! It’s holding up great! I’m still really enjoying this cab! The flight controls are holding up too! Hopefully the marvel pinball comes out soon!
@GadgetMartian
4 жыл бұрын
@@EvrydayErik yes! Pinball machine would be great!!
@EvrydayErik
4 жыл бұрын
Gadget Martian hopefully soon!
@EvrydayErik
4 жыл бұрын
Well...I’m super disappointed with the new announcements, except the marvel pinball, buying on day 1.
@EvrydayErik
4 жыл бұрын
I’ve never played it, I never wanted to. (Just personal prefernce) But......if they can do Area 51 or house of the dead next I’d be psyched.
@ien2023
4 жыл бұрын
I recently got the regular cab with riser for $350 with a free Storm Trooper Robot that's worth $90. and this is $500? Does not make sense. A1UP quality control is not their service. Remember, these are cheap Chinese cab you're over paying for.
@EvrydayErik
4 жыл бұрын
Sounds like you got a good deal there. The new cabs are expensive. There are some good sales out there (so I hear). Waiting for turtles to drop in price.
@davidprodigy5833
4 жыл бұрын
I love baby Yoda 👶 hanging out in the thumbnail
@EvrydayErik
4 жыл бұрын
haha! He is always sneaking around the arcade!
@sagesgamer1638
2 жыл бұрын
12:20 i think that was the new leather
@EvrydayErik
2 жыл бұрын
Haha, definitely was the new leather talking!
@nashvillan4lif
4 жыл бұрын
Another KZitem channel built one of these and had to resauter the control wires inside. Pay attention. You may need to do so as well.
@EvrydayErik
4 жыл бұрын
Ok, thanks! No issues so far. NBA works good.
@mixedhairless
4 жыл бұрын
Well done!
@EvrydayErik
4 жыл бұрын
Hey! Thanks a lot! Looking forward to some new releases.
@garypranzo9334
4 жыл бұрын
Don't bother calling Arcade1up. Order your replacement strip from amazon so you can get it before your kids have to put you in nursing home.
@EvrydayErik
4 жыл бұрын
Lol, they have been pretty good, not perfect, but pretty good. (I might still go on Amazon)
@yellow98gt
4 жыл бұрын
Not good right now. Have 5 tickets open going on 3 months now with no parts no updates.
@EvrydayErik
4 жыл бұрын
yellow98gt that sucks! I’ve been there. They got me a new MK light up marquee in a week. I was shocked.
@yellow98gt
4 жыл бұрын
@@EvrydayErik I can imagine but that was pre covid-19. Now good luck with that speed ever happening again.
@CB-ux5xc
3 жыл бұрын
We need Castlevania.
@EvrydayErik
3 жыл бұрын
That’s a great idea for a cabinet. I think there’s a couple other versions of it to where it’s called a different things. I think I have one called haunted castle in my Pandora’s box six. It would be a great looking cabinet!
@alext.1324
4 жыл бұрын
How did you get the light up Marquee for mortal kombat and pacman?
@EvrydayErik
4 жыл бұрын
The MK cabinet was the costco version, the pac man marquu is from game factory, they sell them for gen 1 cabinets.
@MrMurphdogg24
3 жыл бұрын
How do you play Pac Man and MK2 stool?? It’s so tiny without a riser
@EvrydayErik
3 жыл бұрын
I initially did that for my son, but since the video I assembled my Mortal Kombat riser and I bought the new super Pac-Man cabinet, that came with the riser. So other than Star Wars everything has a riser now. I sold my NBA jam, kind of sad about that
@TheDeathWillCome2012
4 жыл бұрын
I got the stand up version and I don’t have those blue dots. It’s cool anyway’s though 👍
@EvrydayErik
4 жыл бұрын
That’s interesting, I don’t think it’s bad pixels I’m not sure what’s up with that.
@TheDeathWillCome2012
4 жыл бұрын
Could be something with the emulation? I don’t know 🤔
@EvrydayErik
4 жыл бұрын
Jeff Flanagan some people are writing they have the dots, idk.
@longann7560
4 жыл бұрын
Jeff Flanagan, YES you do. Check your game again, in each corners and there you go. We all have them, we all have the same PCB's and blue dots we're in the original game in order to calibrate the vector monitor so you have them too you just didn't notice. This is part of the original game that was coded by code mystic and they converted everything from those blue dots to the frame lag and the grey hit flash. Cheers
@TheDeathWillCome2012
4 жыл бұрын
Long Ann I’ll look closely the next I play it.
@willsfather1
3 жыл бұрын
Amazon or Walmart?
@EvrydayErik
3 жыл бұрын
I think I got this from Best Buy or Gamestop. I’m not sure who has it in right now. It looks like it’s sold out at Walmart.
@ShaneHill69
4 жыл бұрын
You dont use the risers on your other 1up games? Whats up with that?
@EvrydayErik
4 жыл бұрын
My son is 5, easier for him. I have the risers in storage. Jam looks good with the riser.
Пікірлер: 363