I finally got the riser booster last night. What a game changer. Thanks again PD7 for the review and sharing it with the community.
@PDX7
8 ай бұрын
Awesome!! It’s perfect :)
@JeffMercedesC
7 ай бұрын
Time Crisis is definitely well worth the money. I added the 5 inch deluxe cabinet riser and it plays very well now that I'm able to shoot directly centered at the screen.
@PDX7
7 ай бұрын
That riser makes all the difference:)
@stokjock
8 ай бұрын
Those BuyStuff guys put out some great quality products. Nice review Phil
@PDX7
8 ай бұрын
The best! Thanks Stockjock 👊
@clashofclansshield8583
29 күн бұрын
My riser came in. No instructions but it went together smoothly. I like the stickers. They are sturdy and I was able to peel and restick multiple times without it stretching to get it centered. I put my holder on a side screw that bolts the gun holder shelf. It works nicely at that spot if you have space between your cabs. I got the 5”
@PDX7
29 күн бұрын
I’m glad it came quick :) good thing you were able to put it together without instructions, it can be frustrating. So much better with this!
@clashofclansshield8583
29 күн бұрын
@@PDX7 i am hoping they do an update with tc2 link mode. Though they seem to never add games with any updates.
@PDX7
28 күн бұрын
@clashofclansshield8583 I’m not sure ours are powerful enough to run, I guess we always have Buystuff kit we could add down the road.
@Miguel09z
8 ай бұрын
I considered the riser, but as it is right now, its perfect height for my kids to play too. Adding a white Namco decal to the marquee is a must, it made mine look so much better. Etsy has one for a ridge racer, but it fits the Time Crisis cab marquee perfectly.
@PDX7
8 ай бұрын
Awesome Thank you I’ll check it out Miguel! Perfect height for kids, there’s a 3” when they get a little taller. Thanks for watching 👊
@JesterTester
8 ай бұрын
Great job and review, Phil. It makes an awesome difference.
@PDX7
8 ай бұрын
Thanks Jesse, it’s full size now lol well height wise :) thought for sure I was going to take out the ceiling fan last night. Have a great day my friend
@JesterTester
8 ай бұрын
@PDX7 Yes, it did put great Hight on it for sure. You have a great day, also buddy.
@ZodWriter
8 ай бұрын
This looks amazing! The height is perfect! 💥👊💥
@PDX7
8 ай бұрын
Just need one for Casinocade #CasinocadeTimeCrisis 👊Thanks man!
@ZodWriter
8 ай бұрын
@@PDX7 That's going to happen if CasinoCade every goes down in price to make it an affordable project.
@PDX7
8 ай бұрын
@ZodWriter it will be the epic mod for 24!
@bozocalvinjr2134
8 ай бұрын
I'm so glad they made this riser now I just placed my order after I watched your video and I love it myself and it's tall thank u so much PD7
@PDX7
8 ай бұрын
You’ll love it Bozo Calvin! Thank you for watching my friend 👊
@JeffMercedesC
8 ай бұрын
Good review! Time Crisis is definitely my favorite out of the 15 Arcade1up machines I own. It grabs my attention the most it really pops and is an absolute blast to play 😎🤘
@PDX7
8 ай бұрын
Thank you Jeff 👊 it’s one of my favorites too, 15 is a lot of cabs :) What are you keeping an eye on for #16?
@carlo1132
8 ай бұрын
Love Buy Stuff, even if I had an issue with shipping they always made it right fast! 2 ALU risers, 1 ALU Mini Riser, ALU Steering Wheel Mount and Gamer Pro Stand, love them! This Riser looks awesome, made a huge difference in the playability. Nice job PhilO, its 4 inches taller than my ALU's on risers but at 79" the new ALP 4KP is taller!
@PDX7
8 ай бұрын
Whoa that’s tall Carl! We’re close to the real heights :) these risers make a big difference. I’m kind of tossing around Peanuts right now, Carl this is a tough decision…
@carlo1132
8 ай бұрын
@@PDX7 I really dig peanuts alot myself, can you hear the song playing in your head right now, I can, I grew up watching the peanuts and still think its great, I bet they will make a topper with red baron snoopy and propeller, that will be aftermarket of course but so cool.
@PDX7
8 ай бұрын
@carlo1132 your taking me into it :)
@PDX7
8 ай бұрын
@carlo1132 talking
@carlo1132
8 ай бұрын
@@PDX7 I guess you like Peanuts like me, I actually went to find the old movies going to watch a few, esp like the one where they go to France, rem that one!
@102Lawdog
8 ай бұрын
I got this riser. They forgot my art...but it should be here Thursday. It needs the Booster as extended play kills the wrists. I have to bend them unnatural. Good to see how cool my cabinet will look Thursday night. I do have a better option. I got a block I am going to set inside so I can slide the pedal in just like you do now.
@PDX7
8 ай бұрын
That’s a good idea, I couldn’t cover that step in it logo that should work great. Might get a booster for every deluxe I have, they make a huge difference. Thanks for watching!
@102Lawdog
8 ай бұрын
@PDX7 well I tried my original plan. It didn't work. Hole is to small with cabinet in place. I might suggest BuyStuff to cut a notch in their riser to do the idea I mentioned. I am going tobdo it like you though.
@PDX7
8 ай бұрын
They could probably do that
@H0otz
8 ай бұрын
Looks great, thanks for sharing! I just ordered a riser booster from them for my Dragons Lair. It should be getting here later today, excited to put everything together
@PDX7
8 ай бұрын
Awesome, what size did you get Hootz?
@H0otz
8 ай бұрын
@@PDX7 I believe I got the 4 inch riser, that should put it more in line with my F&F. I Have F&F built, still trying to find the time to build NBA Jam Deluxe and Dragons lair though haha. Also random question for you if you dont mind. Is there a trick to peeling off the protective film on the monitors? The screws are put in on top of the plastic so ive had to unscrew and it is a pain.
@PDX7
8 ай бұрын
@H0otz right before I screw in the monitor while the one side is on the floor I peel off the film before I stand it up in there. I loosen one at a time peel past it then tighten that screw. Usually use the foam from box to have monitor sit on flat in between pcb and antenna.
@H0otz
8 ай бұрын
@@PDX7 Thanks so much I knew there had to be some type of trick haha
@mynameisprivate158
8 ай бұрын
17 inch monitor add in the Sinden border and here I am feeling my 43 monitor on my shooting arcade is too small
@PDX7
8 ай бұрын
lol yes 17 is definitely not big enough, we should both upgrade:) Thanks for watching 👊
@zackdreamcast
7 ай бұрын
Surprised they didn’t make it inline vs bulging it out yet again with the old school original arcade1up riser look
@PDX7
7 ай бұрын
Which do you like better? I thought I was going to take the ceiling fan out when I lifted TC up lol
@thequarterdeckarcade
8 ай бұрын
I watched even though I don't have the Time Crisis. Great content for the community PD7!
@PDX7
8 ай бұрын
Thank you Quarter Deck Arcade! Did you install everything on T2?
@thequarterdeckarcade
8 ай бұрын
@@PDX7 Heavens no. That is going to take some time. I'm basically taking the entire thing apart, replacing the artwork, monitor, control panel and then adding Retro Shooter in. With my schedule this is definitely a weekend project. Class of 81 Deluxe arrived yesterday as well. I want to get that built first. I do want to unbox all the Buy Stuff boxes and check everything. Need to unroll the artwork and get it flat too. Good times for this hobbyist!
@PDX7
8 ай бұрын
@thequarterdeckarcade I didn’t know you were replacing the artwork, this is a project :) I forgot about class of 81 too, do you have any kohls cash left?
@thequarterdeckarcade
8 ай бұрын
@@PDX7 Yes. $125, $75 of which expires tomorrow. I am probably stopping at Kohls to do some Christmas shopping tomorrow after work. Only other cab they have on sale right now I'd go after is X-Men, and it's not a must buy for me. Wish Kohls had Big Buck Hunter!
@PDX7
8 ай бұрын
@thequarterdeckarcade I like the new light up marquee for big buck, but not ready to pick that one up yet. I think X- Men goes lower next year if it’s not on your musts hold off :)
@BuyStuffArcades
8 ай бұрын
Thanks again PD7!
@bozocalvinjr2134
8 ай бұрын
I just got my new riser from the same seller and OMG it's so much taller it's looks amazing and my new Graffics stickers are ordered thsnks for everything PD7
@PDX7
8 ай бұрын
It’s a total game changer :) perfect height now!
@bozocalvinjr2134
8 ай бұрын
Yes lord and I love it myself thank u so much appreciated very much
@DUGDAWGER
8 ай бұрын
Looks nice, may consider this and the monitor upgrade down the road.
@PDX7
8 ай бұрын
Really makes a difference, yea the monitor could be next :)
@kevinclauson7613
8 ай бұрын
Great video, love your comparisons with the measuring tape. If the screen was 19'' I'd say that's an XL compared to Pacman, lol. I also agree and wouldn't mount anything on it. Any chance you're gonna upload bloopers hitting that ceiling fan? Lol
@PDX7
8 ай бұрын
lol it was close Kevin :) Oh my gosh I would’ve been in trouble .. Might still go 19” on the monitor, but for now it’s so much better. I love that tape measure :) Thanks for watching Kevin 👊
@ralfieduran8962
8 ай бұрын
Dude, that is sweet....
@PDX7
8 ай бұрын
Awesome riser Ralfie :) that Namco looks great!
@juliohernandez3668
8 ай бұрын
Great simple mod PD7. This looks really good. The height looks identical to T2 so gameplay will be more comfortable vs how it came stock. Does the riser come with the small rubber feet? I noticed that TC doesn’t include the rubber feet unlike the old risers. This would make moving the cab on hard floor moving a lot easier. Thank you again for the review this is a must for all TC owners for sure.
@PDX7
8 ай бұрын
Hi Julio, it has 4 of the white plastic knobs underneath. The screen is so much better being up higher, I can’t believe how tall it is now lol I thought the fan was going to get bumped into. I think with shipping the 5” was 75, 3” is a little cheaper. Thanks for watching man 👊
@juliohernandez3668
8 ай бұрын
@@PDX7 I just placed the order for the riser🤘. I got the 5 in. Thanks for another great review and mod PD7.
@PDX7
8 ай бұрын
@juliohernandez3668 nice :)
@vader86davedestephanis
8 ай бұрын
That was definitely too low stock and I am only 5'8" way better I need 1 for SF ty my friend, cranking out the vids!!
@PDX7
8 ай бұрын
We’re both the same height and this being too short is nuts :) would you get 3” or 5”? Working hard my friend 💪
@vader86davedestephanis
8 ай бұрын
@PDX7 for SF I think 3" I just played sitting on stool and it was right on so 5" would be to much for SF for me
@PDX7
8 ай бұрын
@vader86davedestephanis that monitor would be perfect when your standing with that riser.
@daviddeming1916
8 ай бұрын
Finally something worth reviewing
@PDX7
8 ай бұрын
:) Good Morning David 👊
@daviddeming1916
8 ай бұрын
I ordered the new NBA jam Deluxe and I'm going to get a 3 inch riser booster from them....by doing this it will become a XL ....just as u have now made Time Crisis a XL....the XLs are only taller.....the NBA jam deluxe and Shaq Jam control panels length wide are exactly the same.....only deluxe Jam has better monitor, lightup coin doors, etc.....by using these riser boosters u can create XLs.
Пікірлер: 71