I definitely needed this. I have several windows I want to put casing around and an arched doorway. How thin of a sliver did you remove? Looks abut the thickness of the saw blade?
@antoinettes2714
4 жыл бұрын
Brilliant. How wide was this piece, originally? Can you provide the product number, I'd like to order this style from your website, but cannot find it.
@wishihadthatstore
14 жыл бұрын
@dlittleberry This molding is made from Polyurethane, which is a hard-condensed foam (not like Styrofoam). Different materials will result in varying results. You can get a sample of a polyurethane molding to find out what it is exactly. Check out the website.
@crazythingsidoformoney6362
6 жыл бұрын
Thanks! I didn't want to make arched trim out of veneered-ply, and this allows me to get the effect that I wanted, without so much waste (and time!).
@moderndesigncarpentry8055
3 жыл бұрын
Won’t the cut pieces not match up perfectly to the non cut piece bc you aren’t accounting for the blade taking 1/16-1/8” out during the cut?
@williamjacobs1315
2 жыл бұрын
A year later... Sounds like he said "out of two pieces" because you'd cut one stick to get the 2 outer sides, then move saw to cut the second piece of moulding for the middle section.
@hmtrimworks7148
9 ай бұрын
Yes, that’s why he said to use two pieces… •You’d rip the top section and the bottom section out of one piece and the middle out of the other piece
@MrRyancangri
6 жыл бұрын
Freaking genius!!! Thanks for posting. 👍🏻
@animalpharmfitness7918
3 жыл бұрын
So would you have to cut a quarter inch off the parts you don’t bend for them to be the same width as the bent pieces? Assuming you have a 1/8th inch kerf.
@r3apah
6 ай бұрын
This was my first thought also. Pity in 2 years it's never been addressed.
@syedfinesse
4 жыл бұрын
Hi... Where can I get this material in hyderabad india🇮🇳. Please help me out.
@trey2r
3 жыл бұрын
We don't have it at all in India. For me It's been a year now but couldn't find one till now.
@waiting90days
7 жыл бұрын
Thanks, this solves a problem I had turning a closet into a recessed entertainment center. Much obliged!
@pedzis
Ай бұрын
Hvala puno
@danhall5253
7 жыл бұрын
when you run the piece through a table saw twice you lose 1/4" of width compared to a piece that is not ripped. if no rosette is used, how do you properly transition the miters of the two pieces that are now different widths and profiles?
@robertwelch2600
7 жыл бұрын
You have to use 2 pieces of molding. If you are doing 3 parts, the center section will come from 1 piece and the top and bottom piece will come from the 2nd piece. Here is another video that explains how this is done (Go to around 3:50 in the video): kzitem.info/news/bejne/uqyO0GygaquQiI4
@wateringflower
Жыл бұрын
can this trim be placed on an exterior wall?
@candacemaree9514
7 жыл бұрын
Where did you purchase the trim?
@coollittlejay1718
3 жыл бұрын
Hello does this works with pvc trim also?
@palmer3977
14 жыл бұрын
did you rip that yourself on a tablesaw or was it bought in like that ready cut
@21hawthornemaintenance91
6 жыл бұрын
Does this trick work with Polystyrene moulding as well?
@tomasmorrissey7324
3 жыл бұрын
Hi is this timber or some type of plastic
@Pauls-workshop
11 жыл бұрын
Thank you. That was a lot of help. Great video.
@mzuniga7979
5 жыл бұрын
Thanks for the info. I would’ve never thought about . I’ll stick to my day job.
@devinperry9996
Жыл бұрын
Where do you buy
@FireEater
3 жыл бұрын
Super smart👍🏻
@anthonyshlemon3848
3 жыл бұрын
I always wondered how they did this.
@kyshrode544
3 жыл бұрын
Very helpful!
@creativecrownmolding
11 жыл бұрын
Why not just buy custom flex molding? one part...
@virialaniz9025
4 жыл бұрын
AMAZING!!!! I would've never thought, THANK YOU SO MUCH!!!!
@Mishukov90
4 жыл бұрын
You're a lifesaver!
@wishihadthatstore
14 жыл бұрын
@palmer3977 We used a table saw.
@NaturalHealthAngel
6 жыл бұрын
Awesome! thanks for the info.
@chungtony919
6 жыл бұрын
Very good product
@wishihadthatstore
11 жыл бұрын
Cost or variety.
@wishihadthatstore
11 жыл бұрын
Polyurethane.
@GypsyKing7
9 жыл бұрын
Genius!
@tonymartinez1647
9 жыл бұрын
Asome!!!!
@lezza1975
11 жыл бұрын
Whats the molding made of ?
@Dentropolis
4 жыл бұрын
He said, polyurethane. There is another comment on this material.
@Tomatoman857
10 жыл бұрын
I hope you're not asking money for this.
@petestreet7535
5 жыл бұрын
Smart.
@tim5067
10 жыл бұрын
only way? well mathias wandel has a video where he made it out of wood with a curve
Пікірлер: 45