Arduino cnc pack - s.click.aliexpr... 3D Printer CNC Kit - s.click.aliexpr... 12V Power Supply - s.click.aliexpr... AC To DC Adapter 12V - s.click.aliexpr...
Can you explain me what are jumpers used for I can see you are no using them is that's why you can adjust voltage?
@Jopakilo
5 жыл бұрын
Thanks for you video. Do you know can I use 12v 30a power supply to cnc shield board? Will it be too much current and damage the shield board?
@clueless3891
5 жыл бұрын
I'm currently using pc power supply 12V 20A and it works perfectly
@peternichols9233
6 жыл бұрын
Hi. I'm curious about the voltage and current input used for the GRBL shield? Thanks.
@clueless3891
6 жыл бұрын
Peter Nichols 12v-36v recommended 24v over 2,5A for 3x nema 17 stepper motors
@peternichols9233
6 жыл бұрын
Yes. My shield, drivers and motors are all rated exactly the same. I was more curious about the rating on your power supply. I am using a 12 V 3 A power supply and I seem to keep over heating the drivers...Thanks, though.
@clueless3891
6 жыл бұрын
Peter Nichols I use 12v 2A power supply. My motors are rated at 1.7A. And I use fan to keep temp down, it is crucial for long time jobs 14h or so.
@clueless3891
6 жыл бұрын
Look at 0 : 55 on this video kzitem.info/news/bejne/pHd-nXd7an-eh4Y
@jajalaolee6430
4 жыл бұрын
I'd like to ask about the working code of Aduno with the DRV8825 to control the 12V stepper motor.
@clueless3891
4 жыл бұрын
Flash GRBL 1.1 on arduino and install Universal Gcode Sender for sending gcode
@fearlesswei
6 жыл бұрын
Hi, may i know what are your specification for power supply to support up to 3 Stepper motor? Thank you and hope to hear from you soon.
@clueless3891
6 жыл бұрын
I use 12V 2A for nema 17 stepper motors, and 12V 1A for 28byj-48 converted to bipolar
@fearlesswei
6 жыл бұрын
Mirko Ivkovic do you have to like measure the voltage & current in advance first of the stepper driver before proceeding? I'm using 24V 2A power supply. I've followed the same procedure, but seems one of my stepper is doing fine, the other one seems laggy and unable to perform a full rotation (quite laggy and freeze) Any idea on how to fix this?
@clueless3891
6 жыл бұрын
Did you regulate the current
@clueless3891
6 жыл бұрын
kzitem.info/news/bejne/26OQy6KZcmlnaXo
@fearlesswei
6 жыл бұрын
Mirko Ivkovic yes I do, but I'm not sure whether I did the right way. For one of NEMA 17, the current rating is 1.68A, the other one is 1.33A. The data sheet of the stepper driver can support up to 2A if I'm not mistaken. According to the video , how do you calculate 6.60 suits best for your 1.8A stepper motor? And any guideline on how to adjust both of it without heating up the driver? Lower current?
@madasamyramasamy6297
3 жыл бұрын
If this board is used In a engraving machine....what about spindle motor connection....
@clueless3891
3 жыл бұрын
What is the question?
@madasamyramasamy6297
3 жыл бұрын
@@clueless3891 SIR,.....the question is where i give eletrical connection to the spindle motor in REES 52 BOARD
@clueless3891
3 жыл бұрын
Just use manual control with pwm.
@achmadsyahrizalfahmihasan6644
5 жыл бұрын
excuse me, what is the pin that read EN/GND X.STEP/DIR mean? the one beside the X stepper motor driver
One problem sir stepper motor oh vibrate ho raha hai lekin chal Nahin raha hai iska solution bataenge.
@malikjunaid1
5 жыл бұрын
Plz also show how the stepper wires are connected to cnc shield. I mean their order. A,A', B, B'
@clueless3891
5 жыл бұрын
kzitem.info/news/bejne/zKdmmmGInoliq44
@sanjeevoina8688
6 жыл бұрын
How will it function had it had micro steppers on it.
@clueless3891
6 жыл бұрын
You mean like dvd stepper motors? kzitem.info/news/bejne/uomCvouMg5FyeKw
@clueless3891
6 жыл бұрын
or 28byj-48 kzitem.info/news/bejne/pICe0nh9g4CZZHY
@sanjeevoina8688
6 жыл бұрын
No i mean the micro stepper jumper pins connected
@clueless3891
6 жыл бұрын
On 28byj-48 I use full step and for nema 17 16x microstepping
@sanjeevoina8688
6 жыл бұрын
The six pins lying beneath the driver
@pranaysoni07
5 жыл бұрын
i have 2 X Axis Motor , How to clone X axis in A . i use CNC Shield V3 and a4988 .
@kashifjkm
6 жыл бұрын
i used nema 17 steppers and used 12v 1A adapter but then the a4988 burnt i think, some smoke comes out, and then the Arduino board is not responding now the L light is always on and arduino board not working.. Why?
@pranavmathapati6937
5 жыл бұрын
because u have not connected the a4988 steeper driver correctly
@yashjain3053
6 жыл бұрын
How much pawer must needed for shield v3
@lajmimohamed8296
5 жыл бұрын
the power supply is 12v/0.5 A ??
@clueless3891
5 жыл бұрын
Depend on a stepper motors, I used 12V/1A for 28byj-48 and 12V/2A for NEMA 17
@lajmimohamed8296
5 жыл бұрын
i use A4988 so can you tell me what power supply can i use
@clueless3891
5 жыл бұрын
@@lajmimohamed8296 I am also using A4988, that is the driver for steper motor, if you have NEMA 17 stepper motors i will use min 12V/2A power supply
@lajmimohamed8296
5 жыл бұрын
i will use motors of a dvd so i am not sure but it need 12v/0.5A
@clueless3891
5 жыл бұрын
@@lajmimohamed8296 Yes, that is enough, just adjust drivers current and pay attention to temperature of the motors. - I started like that kzitem.info/news/bejne/uomCvouMg5FyeKw
@reddem4610
6 жыл бұрын
can I connect an external component, like a small water pump, on to the cnc shield?
@clueless3891
6 жыл бұрын
why i don't understand purpose
@reddem4610
6 жыл бұрын
I have the cnc shield connected to the arduino in order to run a motor, I want to add a water pump (cleaning purposes) and control it using the same arduino. Can I connect the pump to unused pins on the cnc? and through which pin? thanks
@clueless3891
6 жыл бұрын
Sorry I can't help you. You can control 3 stepper motors for cnc purpose, but water pump for cleaning on cnc shield I cant connect in my head what are you want to create
@gilaranjuez8671
3 жыл бұрын
do you have the of x,y,z plotter?
@clueless3891
3 жыл бұрын
I made cheap 3 axis cnc machine, explore my channel
@wodzimierzmocny1164
6 жыл бұрын
I have the arduino uno and four drivers TB6600 from China. How can i connect two step motors parallel without the CNC shield?
@clueless3891
6 жыл бұрын
If you have tb6600 drivers I will recommend using standard board with mach3 software, something like this www.aliexpress.com/item/1pcs-MACH3-Engraving-machine-5-Axis-CNC-Breakout-Board-With-Optical-Coupler-For-Stepper-Motor-Driver/32779488657.html?spm=2114.search0204.3.21.HNOVsE&ws_ab_test=searchweb0_0,searchweb201602_5_5130011_10152_10151_10065_10344_10068_10342_10343_51102_10340_10341_5000011_10084_10083_10307_5080011_10312_10059_10313_10314_10534_5790011_100031_10604_10103_10605_10594_5060011_10107_10142,searchweb201603_25,ppcSwitch_5_ppcChannel&algo_expid=3de81c79-878a-4c0b-b328-abffbf9125bc-2&algo_pvid=3de81c79-878a-4c0b-b328-abffbf9125bc&rmStoreLevelAB=5
@clueless3891
6 жыл бұрын
with DB25 parallel cable
@wodzimierzmocny1164
6 жыл бұрын
Thank You
@clueless3891
6 жыл бұрын
If you want to experiment I found this link kzitem.info/news/bejne/w6p-y2WYmoFeqKw
@clueless3891
6 жыл бұрын
I dont have experience with this combination
@stefanmirosevic9985
6 жыл бұрын
how much jumpers i must put on shield to have 5v to 2 step motor from dvd?
@clueless3891
6 жыл бұрын
Da li možemo na naški LOL?
@kalpesh123cnc
7 жыл бұрын
hello sir i make home made cnc my motor 8 polus sanyodenki typ 103h7121-0415 dc 2 amp 1.8 degree 6 wire i use A4988 driver cnc shield v3 arduino uno 3mm pitch screw road use UNIVERSAL G COD SENDER software so how creat 1/16 microstapping satting which port mounting jumper in cnc shield v3 which parameter insert in UNIVERSAL G COD SENDER and which vref set in driver plz help
@clueless3891
7 жыл бұрын
For 1/16 microstepping all three jumpers should be inserted. For configuration follow this link. github.com/grbl/grbl/wiki/Configuring-Grbl-v0.9 and this link for driver current config reprap.org/wiki/Pololu_stepper_driver_board Tip. Lead is the distance along the screw's axis that is covered by one complete rotation of the screw (360°). Pitch is the distance from the crest of one thread to the next. So the lead of the screw is crucial for calculation.
@nikolicaboskovic
7 жыл бұрын
Mirko Ivkovic Ivkoviću jel postoji sansa nekako da te kontaktiram putem mejla, fejsa ili skajpa?
@user-jb8xx1fq3s
4 жыл бұрын
👏🏻👏🏻👏🏻💪🏻
@shakeebkhan7794
6 жыл бұрын
Can 4 stepper motor can be control by CNC shield
@clueless3891
5 жыл бұрын
yes
@KingMoh-n2r
6 жыл бұрын
Hi, I want to help with a laser connection to Arduino Mega Cnc.
@clueless3891
6 жыл бұрын
I don't have experience with lasers
@clueless3891
6 жыл бұрын
GRBL 1.1 have some new features for lasers, here is the link github.com/gnea/grbl/wiki/Grbl-v1.1-Laser-Mode
@KingMoh-n2r
6 жыл бұрын
Mirko Ivkovic You do not know someone who knows that
@clueless3891
6 жыл бұрын
I don't know, sorry
@KingMoh-n2r
6 жыл бұрын
Mirko Ivkovic Thank you.
@suhaillatief2369
4 жыл бұрын
Stepper moter x y note working
@clueless3891
4 жыл бұрын
If z is working swap motor and driver to other axis. Than check wiring and adjust current on other drivers
@donjuanlopez8008
5 жыл бұрын
jumpers?????
@clueless3891
5 жыл бұрын
No jumpers with 28byj-48 stepper motors and dvd gear rack - full step mode, with nema 17 and dvd gear rack all 3 jumpers in sixteenth step mode. Nema 17 with lead screw - pitch and lead 2mm full step mode - no jumpers.
@reddem4610
6 жыл бұрын
Hi, can u plz give me the link for the arduino code?
@clueless3891
6 жыл бұрын
github.com/gnea/grbl/wiki/Compiling-Grbl
@clueless3891
6 жыл бұрын
github.com/gnea/grbl/wiki
@clueless3891
6 жыл бұрын
github.com/winder/Universal-G-Code-Sender
@reddem4610
6 жыл бұрын
Mirko Ivkovic many thanks
@RajSingh-zn1py
5 жыл бұрын
या कौन सा डिवाइस है
@yashjain3053
6 жыл бұрын
Can you pls send me the link for gcode pls help me pls
@yashjain3053
6 жыл бұрын
Gcode for cnc handwriting machine
@clueless3891
6 жыл бұрын
It is best to start with free easel, you can create anything you want and get G code or directly send to CNC machine - easel.inventables.com/users/sign_in
@sanjeevoina8688
6 жыл бұрын
Thank you. I will try. Pks give me ur fb link so that i can contact you in future
Пікірлер: 93