The best project I have come across on KZitem. Thanks brother.
@utehstr
Жыл бұрын
You're welcome 🙂.
@abdul2105
3 ай бұрын
@@utehstr Hi please i need help i am constantly getting the error no serial data received is my esp32-cam broken or what is it?
@maxmubin379
19 күн бұрын
Mind blowing sir❤❤❤
@stewartpereira5442
2 жыл бұрын
Thanks for an Awesome project!!
@utehstr
2 жыл бұрын
You're welcome🙂.
@abdul2105
3 ай бұрын
@@utehstr Hi please i need help i am constantly getting the error no serial data received is my esp32-cam broken or what is it?
@dileepkumarprajapati6098
Жыл бұрын
I'm facing problem, please help me. "A fatal error occurred: Failed to connect to ESP32: Invalid head of packet ('S')"
@geniustechnology3358
Жыл бұрын
Excellent job
@utehstr
Жыл бұрын
Thank you🙂
@rosellamassa6448
6 ай бұрын
Grande
@cansatmessi2.0
Жыл бұрын
thank you man, its awesome
@utehstr
Жыл бұрын
You're welcome 🙂.
@mahentay8031
3 ай бұрын
Big Thanks
@utehstr
3 ай бұрын
You're welcome🙂
@arindomain3574
10 ай бұрын
you are awsome
@frankjay6533
11 ай бұрын
i really like this project, but i have some small problem....there is a lag in the picture capturing thus after capturing one position it will still send the same position for about 4x though you have changed the position....any fix for that lag?
@rakaminul2181
9 ай бұрын
Same, me to
@rakaminul2181
9 ай бұрын
Please author, answer
@psykopat81
9 ай бұрын
@@rakaminul2181it probably sends those picture, which captured during sensor warming
@user-gf7bj8uf5p
9 ай бұрын
same :(
@amansingh-xp1ul
Жыл бұрын
Thank you for such a amazing project, but i faced a problem on 3rd project in which pir sensor after stabilization complete, but it don't send picture automatically by sensing ,please reply why i face this problem
@amansingh-xp1ul
Жыл бұрын
Pir sensor related something not present in description as you say .
@utehstr
Жыл бұрын
Have you connected the PIR sensor with the ESP32 Cam correctly? Have you checked the cable? Try testing the PIR sensor only with the code for the PIR sensor to make sure the PIR sensor and its wiring are in good working order.
@amansingh-xp1ul
Жыл бұрын
@@utehstr yes i check the pin the i realised that pin no. not matched with coding pin the i change this acoording to coding ,after this it work perfectly.
@stive8171
Жыл бұрын
cara tu consegue disponibilizar pra mim a pasta com esse codigo?? não tem nenhum link pra referencia dele. Obg
@FitJamal
Жыл бұрын
Hello sir, is it possible if I use the same coding as in this video on 'ESP32-CAM using Arduino UNO' by referring to the link you gave?
@vortexvgm
Жыл бұрын
Hello, thank you for this amazing project! Is it possible to send the images to multiple telegram accounts?
@adz458YT
Жыл бұрын
When executing the code to take the photo, I get an error that is the following ESP32-CAM failed to send photo. Tip : - Reset ESP32-CAM - Change FRAMESIZE (see Drop down frame size in void configInitCamera) how can i solve that?
@nurfarahizzati3839
3 күн бұрын
hi sir. can you help me? if i want to use adapter and connect to ESP32-CAM-MB USB Programmer... how was the connection to the ESP3-CAM?
@ariansyahcenter
2 жыл бұрын
Awesome
@utehstr
2 жыл бұрын
Thanks 🙂.
@zeynepfenercioglu8631
8 ай бұрын
Can you please make the same video using the flex sensor? And how can I make it send photos at regular intervals?
@arrvinnadewi789
8 ай бұрын
Thanks for the awesome project. may I know what kind of battery do you use ? thanks!
@utehstr
8 ай бұрын
I'm using an 18650 battery with a "step up" module to 5v.
@arrvinnadewi789
8 ай бұрын
@@utehstr Noted thank you very much sir
@utehstr
7 ай бұрын
@@arrvinnadewi789 you're welcome 🙂
@juanperalta8582
Ай бұрын
I have a problem with the project. When a I active the option to take photo with the sensor PIR, the esp32cam starts to take photo but the sensor didn't detect any movent. Have Any one had the same problem?
@atiowahyudi2495
2 жыл бұрын
hi bro..this project was amazing..but i have a question,,why my pir keep detecting and take a poto?
@moderatord2984
Жыл бұрын
Hi bro, have you find the solution to that problem?
@luismitr8233
Жыл бұрын
@@moderatord2984 mine too
@labcreative9362
Жыл бұрын
hi bro i have same problem The problem is get many photos when activating the mode with the sensor have you solved the problem
@danielahuatzi6044
3 күн бұрын
I don't understand your connection, could you tell me how to do it correctly?
@jensneumann8803
Жыл бұрын
Hello, i have a problem. The connection between esp32 cam and telegram is stable. But if Isend the command capture_photo there is not photo back to telegram. Is there in the sketch a BUG?
@bernardfavre4411
2 жыл бұрын
I like!
@utehstr
2 жыл бұрын
Thanks 🙂.
@ranz-24
8 ай бұрын
Hello sir, why does the pir sensor continue to send images even when it is covered?
@raijinguinita582
Жыл бұрын
do you have a rtsp sketch for esp32 cam, sir? Ive uploaded a rtsp on my esp32 cam but no image on motioneye..if i stearm it on vlc, theres a image but in motion eye theres no image
@wiraa7764
2 жыл бұрын
hi, great tutorial ! i have a question, why telegram did not reply at all when i give command? this is the response from the serial monitor Connecting to Bruh ..... Successfully connected to Bruh ESP32-CAM IP Address: 192.168.43.207 ------------ ------------ Got response Handle New Messages: 1 Incoming command/message : /start Reply to the start command. ------------ and it ended there. even when i give command like pinging the esp cam it still did not respond at all. do you know why? thank you!
@utehstr
2 жыл бұрын
As you can see in the video, everything is going well. Try re-watching the video, maybe you missed something.
@AlexMartin-vi4eq
2 жыл бұрын
I have the same problem 😅
@rosellamassa6448
6 ай бұрын
Great project thanks...but it gives me an error "Send photos..{"ok":false,"error_code":400,"description":"Bad Request: IMAGE_PROCESS_FAILED"}. I changed the framesize but without success can you help me , Thanks in advance
@deepanshusarawagi6681
9 ай бұрын
Sir code ma koi problem ha esp32 baar baar photo poc kar raha when we use pir
@yogeshitaliya473
2 жыл бұрын
😍😍😍😍😍
@utehstr
2 жыл бұрын
👍🙂
@suryagaming9286
10 ай бұрын
can we use any other board rather than ai thinker please give me reply
@narekhambardzumyan1059
Жыл бұрын
Everything worked except taking photos with PR sensor, is it possible to troubleshoot what can be the issue here? i am using HC-SR501 as PIR sensor
@narekhambardzumyan1059
Жыл бұрын
Neverminded it was a sensitivity issue on Pir-s side =D
@prajwalx77
9 ай бұрын
please send me the code @@narekhambardzumyan1059
@abdul2105
3 ай бұрын
Hi please i need help i am constantly getting the error no serial data received is my esp32-cam broken or what is it?
@rizkiherdiansyah6157
3 ай бұрын
your use ftdi to upload program?
@yawarsaeed6499
Жыл бұрын
Thanks for sharing such an awesome project. I tried the first code for testing/checking the esp32 cam connectivity with my Telegram bot. I get esp32 cam IP Address on Arduino serial monitor but when I click /Start on bot page, it doesn't show Got response on serial monitor. Nor does any activity or led on off commands on bot page appear. Can you please help me why it's bot working. I tried many other codes on KZitem for esp32 cam & Telegram but on clicking /Start nothing happens on Bot page while serial monitor shows IP. I tried chatting with one of friends the chatting is ok. Awaiting your earliest response. Kind regards.
@utehstr
Жыл бұрын
Hello, Make sure that you have used the correct "BOTtoken" and "CHAT_ID".
@yawarsaeed6499
Жыл бұрын
@@utehstr Thank you very much for your quick response. I have already checked number of times Bot token and Bot id but every time no response on bot page on /start command. Can you please share what esp32 board version you are using in Arduino IDE.. BTW I have also tried on my friend mobile creating a new Telegram account & new bot but still the same fate . Please assist where I m going wrong . Once again Thanks & kind regards.
@utehstr
Жыл бұрын
@@yawarsaeed6499 I'm using Arduino Core for The ESP32 V1.0.6
@azmihusni8021
Жыл бұрын
how to connect esp 32 cam with pr and buzzer?
@Nanada1me
Жыл бұрын
hello can i know where you buy the 5v supply ?
@stilianb.383
Жыл бұрын
Hi nice review. I have a one problem with this. Do you know hot to fix it A fatal error occurred: MD5 of file does not match data in flash! Failed uploading: uploading error: exit status 2
@harivarman3472
Жыл бұрын
issue is solved? if yes, can you tell me how to fix it?
@psykopat81
9 ай бұрын
The project is very nice, the codes are also very good, but it does not take and send the photos in real time, it always sends the photos it has taken several times before.
@prajwalx77
9 ай бұрын
how did you formatted the code, I mean its splitted in 3 parts how did you made it in one single part
@psykopat81
9 ай бұрын
@@prajwalx77 copy the part , which do you want to run and paste it on a new sketch
@hurmatbekurinboyev6842
2 жыл бұрын
'TELEGRAM_CERTIFICATE_ROOT' was not declared in this scope?
@utehstr
2 жыл бұрын
Make sure that you have the "UniversalTelegramBot" library installed.
@21khanfarhan
Жыл бұрын
How to share access of it (i want to share its access to my family member (we both need access at same time)???
@emraheren
2 жыл бұрын
how is the power consumption how long can we run it with 18650 battery
@utehstr
2 жыл бұрын
I don't know for sure, I haven't tried it.
@NileshPatel-ic4zc
2 жыл бұрын
How to reduce photo capturing and sending time
@Justlup22
Жыл бұрын
Pls i've same issue
@21khanfarhan
Жыл бұрын
Reduce sensor calibration time
@21khanfarhan
Жыл бұрын
30 ko 0 karo
@yoplays
2 жыл бұрын
why my pir keep detecting object,i already set my pir sensitive and timing but always detecting object
@utehstr
2 жыл бұрын
Are you sure you have connected the vcc on the PIR sensor with a 3.3V power supply?
@yoplays
2 жыл бұрын
@@utehstr yes i already but keep detecting every 1 second
@utehstr
2 жыл бұрын
@@yoplays Have you tried turning on the PIR sensor for 30 to 60 seconds before using it? I've explained about this in the video.
@alizahar3939
Жыл бұрын
to send pictures to telegram, does the esp32 cam have to be connected to the internet ??
@utehstr
Жыл бұрын
Yes, the ESP32-CAM must be connected to the internet.
@alizahar3939
Жыл бұрын
@@utehstr in the video, can you add a gsm sim card to replace the wifi connection?
@giaphuc2630
Жыл бұрын
hey bro can i change with ultra sonic
@Nirajanvloger34
5 ай бұрын
CDRTOSConfigure embedded:startup.tcl:28: Error: Can't find debug.cfg in procedure 'script' at file "embedded:startup.tcl", line 28 what should i do .
@deeghovlogs
4 ай бұрын
where is the link for pir esp32 cam and telegram merge program code
@deeghovlogs
4 ай бұрын
ESP32-CAM Take Photo with PIR and Send Photo to Telegram I need this program code link please help!!!!!!
this wont work when you provide your mobile hotspot name and password you need a wifi for this
@utehstr
9 ай бұрын
In this project video I use "mobile hotspot" and it works. If it doesn't work for you, check your "mobile hotspot" settings.
@prajwalx77
9 ай бұрын
@@utehstr after exploring esp 32 I found out it doesn't support 5G it needs 4G
@prajwalx77
9 ай бұрын
@@utehstrwhat is the role of those 3 lines why we need to activate and comment those then reupload
@ayrtoncontreras8674
2 жыл бұрын
Do you have the wiring diagram?
@utehstr
2 жыл бұрын
Look at 14:03 .
@niggtube4482
Жыл бұрын
hello can u show us the schematic and wiring
@utehstr
Жыл бұрын
I've updated the code file in the description of this video to include an installation image of the EPS32 CAM with PIR sensor. The link to download it is available in the description of this video.
@niggtube4482
Жыл бұрын
@@utehstr thanks so much
@utehstr
Жыл бұрын
@@niggtube4482 You're welcome 🙂.
@D_Hertz
5 ай бұрын
Please, how can I get the code?
@D_Hertz
5 ай бұрын
The link in the description is not working.
@utehstr
5 ай бұрын
@@D_Hertz I've checked the link to download the code and it works.
@D_Hertz
5 ай бұрын
Thanks a bunch 😊
@NTX10
2 жыл бұрын
Hi, first of all thanks for an amazing tutorial! I am doing some tests but I can not send photos to Telegram. I got every time the same error while sending photos: "/capture_photo New photo request Preparing photo... Taking a photo... Successful photo taking. Connect to api.telegram.org Connection successful Send photos............................................................. From the ESP32-CAM : ESP32-CAM failed to send photo. Suggestion : - Reset ESP32-CAM - Change FRAMESIZE (see Drop down frame size in void configInitCamera) ------------ " I've dropped down the frame size and the configInit: s->set_framesize(s, FRAMESIZE_QQVGA); config.frame_size = FRAMESIZE_SVGA; else{ config.frame_size = FRAMESIZE_VGA;} .... Any suggestions? :/ Thank you in advance!!! Great job :)
@utehstr
2 жыл бұрын
Make sure that you have entered the correct BOTtoken and CHAT_ID.
@NTX10
2 жыл бұрын
@@utehstr I did. Even though I could control Flash led through Telegram. But it's ok, this error was only with the part 2 of the code. With the third and last part (I mean Cam + Telegram + PIR), everything was fine. Thanks again!! I've seen many tutorials, but yours is the one with the best explanations. 👏🏼👏🏼👏🏼
@utehstr
2 жыл бұрын
@@NTX10 When I have some free time, I will check and retest part 2 of the code. Maybe something is wrong there. Thank you for your feedback 🙂🙂🙂.
@utehstr
2 жыл бұрын
@@NTX10 Hi, I've checked the code part 2 ("02 ESP32 CAM Take and Send Photo to Telegram"), I found the wrong code written there and I've fixed it. Thanks for telling me about that. I've updated the code file with the code file I've fixed. I have also updated the download link to download the code file. Please try it if you want to try it.
@rosellamassa6448
6 ай бұрын
I have the same problem, did you solve it? and how? thank you so much
Пікірлер: 117