Excellent project for surveillance camera project to build and enjoy the happiness of making projects . Thanks for guiding
@utehstr
4 ай бұрын
👍🙂
@lucianodipaolo2428
2 жыл бұрын
magnificent work
@utehstr
2 жыл бұрын
Thank you 🙂.
@ZinTechIdeas
2 жыл бұрын
excellent work
@utehstr
2 жыл бұрын
Thank you 🙂.
@henryg7736
Ай бұрын
Hey sorry maybe you missed something? What do you connect the servo to the ESP camera with? Meanwhile on the ESP32-CAM-MB USB Programmer there is no space or slot to connect the servo to the ESP camera
@yogeshitaliya473
2 жыл бұрын
😍😍😍😍
@utehstr
2 жыл бұрын
👍🙂
@JaviersDIY
6 ай бұрын
I follow the steps and the code work very will but when i open the ip, the motor dont work. Can you help me sir?
@denilsondossantos1658
2 жыл бұрын
Verry good❤️
@utehstr
2 жыл бұрын
Thanks 🙂
@massonepaolo
Жыл бұрын
Hi, it is possible to set the code for make the esp-32 module connect to my wifi network but have a fixed ip address to reach? Thank you
@prasadsandaruwan8196
Ай бұрын
sir The second code you put in the description here is not compiled on my laptop. Can you tell me why? The error is shown like this "(Compilation error: 'ledcSetup' was not declared in this scope; did you mean 'ledc_stop'?)". I tried to solve this after doing everything I could, but I couldn't.🥲🥲 . I am still a new student to Arduino. Please help me.
@mohsinpeero
Жыл бұрын
good attempt
@utehstr
Жыл бұрын
Thank you 🙂.
@gsrathore97x
2 жыл бұрын
Sir, Your work and documentation is highly appreciated.🦾🦾
@utehstr
2 жыл бұрын
Thank you 🙂.
@psykopat81
11 ай бұрын
The video flow is normal, but when I try to move the servo, the image disappears. I use a separate 5 volt power supply for the servo.
@rizkiefendi9004
2 жыл бұрын
mantab teh
@utehstr
2 жыл бұрын
Makasih ki 🙂.
@dineshkumara.parmar9930
2 жыл бұрын
Very good video I try this project ✍✍
@utehstr
2 жыл бұрын
👍🙂
@aaronpaul2550
Жыл бұрын
very good
@utehstr
Жыл бұрын
Thank you 🙂.
@ath_greek
7 ай бұрын
I did the 4# step and my servos are not responding on the web also the cam video is suddenly disappearing ;/
@tuanpagaraji81
Жыл бұрын
Bro...itu servo yang kamu pakai yg 180 derajat atau yang 360 derajat?
@utehstr
Жыл бұрын
180 derajat.
@josephusdy9726
2 жыл бұрын
Hi. Can i put a dynamic text overlay on the video streamed before it is being saved into the video file? I am using arduino programming. Thanks.
@sdknstar601
Жыл бұрын
Just subscribe to your channel...i want to ask if the camera movement is able to control using a usb joystick connected on pc?..
@MuhammadRidho-qu9ey
7 ай бұрын
use power bank?
@muhammadapriyansyah6655
Жыл бұрын
Why does the servo control when pressed doesn't work, only the light works
@fadzarizky1427
Жыл бұрын
duhh maslahnya sama bro
@psykopat81
11 ай бұрын
did you solved your problem?
@psykopat81
11 ай бұрын
@@fadzarizky1427did you solved your problem?
@frustratedguy666
Жыл бұрын
Do i have to erase previous code from esp32 before adding next code?
@utehstr
Жыл бұрын
it depends how the previous code works. but I usually put simple program code like program code which just prints something like : serial.println("something" ); before entering the project code. i hope you understand what i mean.
@tonyp4894
Жыл бұрын
why don't you put the code in a textfile editor like NOTEPAD. Putting it in a RAR file, just makes it hard to get the code, (why sign in and passwords?) Is it a secret?? Please, take the time to post your code in a text file Thank you
@thevoiceland
10 ай бұрын
Is it possible to code it to follow people or anything that moves?
@utehstr
10 ай бұрын
Technically it's possible. But about how to make it, that's something I can't answer because of my limited knowledge and I've never made it. Maybe you can find it from other sources.
@thevoiceland
10 ай бұрын
@@utehstr No worries! Thanks for the response. I'll definitely look into other sources. I have tried multiple codes to follow the detected object: ```C++ #include "esp_camera.h" #include #include #include // Replace with your network credentials const char* ssid = "YourWiFiSSID"; const char* password = "YourWiFiPassword"; // Use your own cascade static const char * face_cascade = "/cascade_path/haarcascade_frontalface_default.xml"; const int panPin = 12; // GPIO pin for pan servo const int tiltPin = 13; // GPIO pin for tilt servo Servo panServo; // Create instance of pan servo Servo tiltServo; // Create instance of tilt servo camera_config_t config; void setup() { WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); // Disable brownout detector WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); Serial.println("Connecting to WiFi..."); } Serial.println("Connected to WiFi"); panServo.attach(panPin); // Attach the pan servo to the GPIO pin tiltServo.attach(tiltPin); // Attach the tilt servo to the GPIO pin config.ledc_channel = LEDC_CHANNEL_0; // ... (rest of the camera configuration) esp_err_t err = esp_camera_init(&config); if (err != ESP_OK) { Serial.printf("Camera init failed with error 0x%x", err); return; } Serial.println("Camera ready"); } void loop() { camera_fb_t * fb = esp_camera_fb_get(); if (fb) { esp_err_t res = face_recognition(fb->width, fb->height, fb->format, fb->buf, 7, 1500, 2, 8, IDENTIFY, 64, 64); if (res) { Serial.println("Face detected!"); int panAngle = map(res.x, 0, fb->width, 0, 180); // Map x-coordinate of the detected face to the pan servo angle int tiltAngle = map(res.y, 0, fb->height, 0, 180); // Map y-coordinate of the detected face to the tilt servo angle panServo.write(panAngle); // Set the pan servo angle tiltServo.write(tiltAngle); // Set the tilt servo angle } esp_camera_fb_return(fb); } else { Serial.println("Camera capture failed"); } } ```
@leejaric4448
4 ай бұрын
Hii sir, i am currently facing issue, may i know how to contact u
Пікірлер: 44