I've done all the same - DMD pinout connection, I've downloaded the same library and used the same sketch code, but it just doesn't work with ESP32. Only empty screen, no any LED light on. I don't understand...
@shiladityaghosh4698
Жыл бұрын
I also tried the same. In my case random leds were lighting up in a static form. All connections are 100% perfect and its also well working with esp8266. If DMD32 has been a success to anyone else, kindly report. Need help.
@dimitriosgerasimossgourdos8708
4 ай бұрын
If you downgrade esp32 to v2.0.2 is working a bit better but still have issues
@alexptvz1076
4 ай бұрын
@@dimitriosgerasimossgourdos8708 very good.. where to find well working library for esp32 ?
@stephanetouya1269
Жыл бұрын
Bonjour, merci pour la vidéo mais malheureusement le premier code refuse de compiler pourtant j'ai tout fait comme dans la vidéo. Même le code de démonstration de la librairie nr fonctionne ne compile pas, j'ai remarqué que j'ai une version d'arduino supérieur à la vôtre, celà pourrait t'il être le problème ?
@user-jw7kl7vk9o
Жыл бұрын
Do you use logic converter to convert OE and R port from 3.3v to 5v? Because mine are not working but code is sended to esp32 without error. I am measure the voltage on both port there is differrnces between uno and esp32
@dwinanurizkysyahputri9400
3 ай бұрын
Can ask something? I have followed all the steps, but it doesn't work. Such as, wiring, code program is correct but the led p10 doesn't turn on. Any tips or steps are missed?
@luisgerardohernandezduque531
Жыл бұрын
nice project, are you planning to work with 2 or more P10 display conected ??
@akashkamble1926
Жыл бұрын
Yes bro please share working on 2 esps and 2 P10 boards
@user-ky3iu3vq1b
8 ай бұрын
P10 Red 32x16 matrix display with HUB12 connections as per given diagram are done. The code is successfully downloaded in ESP32 Devkit V1. But display is blank. Can you please guide suitably to make it working?
@tacio2115
5 ай бұрын
Already solved?
@fak1425
4 ай бұрын
No
@fak1425
4 ай бұрын
I'm facing the same error here too
@tacio2115
4 ай бұрын
@@fak1425 i got it fixed by downgrading esp kernel to ver 2.0.2. More detail at issues tab in the github link showed in the video. It is easier to do on old version of the arduino IDE
@fak1425
4 ай бұрын
@@tacio2115 Thanks I will try that now and give you feedback
@salamathusainmomin4698
Ай бұрын
I am having 1 problem with this interfacing of P10 singal color display with esp32 using Arduino ide That the code is successfully uploaded into esp32 but the display is not showing any letters even it's supply is on and every connection is done as shown in the diagram Please help me to solve this problem ! 🙏
@utehstr
Ай бұрын
Double-check the cable you are using, check with a multimeter to make sure the cable you are using is connected end to end. What kind of power supply do you use? Do the ESP32 and P10 use the same power supply?
@krisbalora9851
Жыл бұрын
Bang, request tutorial untuk set text dari mysql localhost dong
@aiciplus2000
10 ай бұрын
good job.... but this local server, not sent text if out ranges WiFi local host. suggestion can you input text for spreadsheet to esp32 or esp8266 and view text in P10 display or dox matrix 7219, thank you
@tacio2115
5 ай бұрын
Any hint about brightness control?
@user-iz3rt6fd1x
7 ай бұрын
how to display image in P10 display using esp32 (using station Mode)
@tareshgupta1095
6 ай бұрын
not working with same connections , any tips on how i can make it work?
@utehstr
6 ай бұрын
As you can see in the video, everything works fine. Watch the video again, maybe you missed something. Also check the cable you are using, maybe there is a cable that is not connected.
@tareshgupta1095
6 ай бұрын
do we need a logic level converter , because after checking every connection , it is not working properly!
@utehstr
6 ай бұрын
This project does not require a "logic level converter". A few days ago, I created another project using P10 and ESP32 with the base of this project and it worked fine.
@tareshgupta1095
6 ай бұрын
@@utehstr Yea, We just need to use esp 2.0.2 and lower versions, since dir, lat and clk pins are 0 V in the later versions.
@diptiprakashbachhar8432
Жыл бұрын
Can i use this in NODE MCU 8266 !
@iotkontroller
Жыл бұрын
sorry brother,, i use library dmd32, esp32 devkit , arduino v2.2.1 but nothing happen in my dmd p10 , i check clk ( pin 18) signal with scope,, there's no signal too,, can you solve my problem? thank you so much for your help,,
@tacio2115
5 ай бұрын
Already solved?
@zhepty12
8 ай бұрын
How to use ethernet sheild
@solankijatin2592
Жыл бұрын
sir your video is amazing , i working on this project and i want your code ,i download your code but inside the file code not found
@utehstr
Жыл бұрын
The code file is saved in the .rar file format. I created a .rar file using Winrar V5.50, so to extract it, make sure you use the same version of Winrar that I use or the latest version or use the winrar extractor online.
@musacesur6693
Жыл бұрын
I see that the files are missing. Can you share the full version. Even the web side did not work, can you upload it again with the detailed file of the sql and web side?
@utehstr
Жыл бұрын
What do you mean by "I see that the files are missing" ? What sql files do you mean? i am not using sql on this project.
@musacesur6693
Жыл бұрын
@@utehstr Schematic about the sql part on the web side and the connection of the p10 panel
@utehstr
Жыл бұрын
@@musacesur6693 I'm confused, I already told you that I'm not using sql on this project. Or you can tell me at what minute in this video I use sql.
@musacesur6693
Жыл бұрын
@@utehstr files are missing. I could not run it on the php side, because there was no sql, I could not find a connection between the .esp32 and the p10 panel. Can you help with this
@utehstr
Жыл бұрын
@@musacesur6693 From some of the comments you wrote, it seems you didn't watch the video in full. Try to watch the video in full so you can make projects like in the video.
@yuvarajs1530
Жыл бұрын
Can you guide me, How to display the letters vertically?
@utehstr
Жыл бұрын
Sorry I can't guide you, because I've never tried anything like it.
@yuvarajs1530
Жыл бұрын
@@utehstr Ok
@amirakallala1264
Жыл бұрын
thank you for this video ,Can you using the arduino code to set text on p10 with application mobile
@utehstr
Жыл бұрын
You're welcome 🙂. If you open the ESP32 IP in a mobile browser, then connect the mobile wifi to the same WiFi network as the ESP32, then you can also set text on the P10 via mobile.
@vilayet90436
Жыл бұрын
@@utehstr Will the font I select in the IDE show up on the display? This "A" was our national letter. Will you see it?Will the font I select in the IDE show up on the display? This "A" was our national letter. Will you see it?
@utehstr
Жыл бұрын
@@vilayet90436 Sorry I don't understand what you mean, can you explain in more detail.
@vilayet90436
Жыл бұрын
@@utehstr Sorry Google translated it like this.🙏🙏🙏
Пікірлер: 56