okay so a point to everyone, i was struggling with this issue for a long time, and even this method didn't work as like many others it said "ch340 is preinstalled " but finally got the solution- CONNECT YOUR USB REAL TIGHT. yes that was it, force it well into the arduino and you would get a nice connected sound too, and VOILA. your port option is back !!
@snek1461
3 жыл бұрын
oh my god your a life saver
@sachinkulal8345
3 жыл бұрын
U are actually genius 💚🙏
@Adam-dm3oo
3 жыл бұрын
OMG THANK YOU
@alexseblopez
2 жыл бұрын
Thanks for that!
@DMES-wp2fj
2 жыл бұрын
You bastard you should be the one making all these "Arduino port problem vids" 😂
@nehashimpi4203
7 ай бұрын
I did all the process still not able to get the port
@randomaccount6146
3 жыл бұрын
Dude i've been looking at other solutions on youtube for 2 hours and all they have done was spamming update drivers in the device manager which didnt work. And your solution worked ! Plus your video was only 2 minutes. Definitely giving a like.
@Quick_Look
3 жыл бұрын
Thank you!!
@kpop_1007
8 ай бұрын
@@Quick_Lookit’s still not available & the driver is showing it’s already downloaded ???
@aryachavan5558
3 жыл бұрын
U have given proper information, when to connect arduino board etc thanks
@anjuanna5885
3 жыл бұрын
Thanx bro.. Successfully completed✌️ after searching for 2 hours and atlast found ur video😇
@reyanshparab7140
3 ай бұрын
Thanks a lot It works 🎉🎉🎉🎉🎉 U gained a sub U are the best😊
@victorcimpean7791
3 жыл бұрын
Thank you so much! You deserve everything in the world! Finally someone who can help me!!!!!
@stideas8127
2 ай бұрын
Thanks a lot guys i followed all the steps and it worked although I had to uninstall the drivers that were installed and re install the ones you provided thanks a lot God bless 🙏
@maheshnaik561
3 жыл бұрын
Looks like this guy will get all his project making money back from KZitem videos. Smart.
@Quick_Look
3 жыл бұрын
YT. Jst a hobby💙
@atikah_5501
3 жыл бұрын
TQ SO MUCH! YOU SAFE MY FINAL YEAR PROJECT
@agentbarni335
3 жыл бұрын
Thanks man u made up my day!!! Hope ur doing great!!!
@sajkin9705
8 ай бұрын
windows 11 not working
@samgeorge3133
3 жыл бұрын
Good one Finally found a video which is working
@yuriu8
Жыл бұрын
Thank you i spend hours trying to figure out cheers
@life200op
2 жыл бұрын
Oo this is completely working 100%
@Quick_Look
2 жыл бұрын
Happy to kn
@tahsin29292
8 ай бұрын
Thanks dude. You have saved me! 😂
@balajireddy3228
3 жыл бұрын
The prompt is showing me that this driver is pre-installed. Could you help me out with this?
@sidharth14
3 жыл бұрын
Check the pinned comment. It worked for me🙂
@NEscape_
3 жыл бұрын
Thank you bro i can say that it really worked no click-bait video :))
@Adherences
3 жыл бұрын
thx, you really took me out of the mud
@msh2253
2 жыл бұрын
Thanks friend But unfortunately, Port still not active for UNO, only port become active when I connect mega2560!! Maybe UNO board is damage!?
@thierry9592
3 жыл бұрын
my man!!! i already had a new arduino board in my shopping list, i was sure it was broken. Thank you so much!
@AkshayV-u4z
7 ай бұрын
Is your Arduino showing in the device manager before showing the port ?
@edanurkulac2660
7 ай бұрын
ya sen nasıl bir kralsın, sen efsanesin. Harikasın. Çok teşekkür ederim. İyi ki varsın dostum. Bir şeye ihtiyacın olursa yaz elimden geleni yaparım.
@shahiddz7521
3 жыл бұрын
Thx ❤️ U solve my problem 🙏 Thanks from Algeria 🇩🇿❤️
@jeffersondaguil1223
3 жыл бұрын
when i install ch340 after pressing install it shows "the drive is successfully pre-installed in advance" but in arduino its still not enabling the port can you please solve this problem
@Quick_Look
3 жыл бұрын
Read the pinned comment, try and see if it helps you..
@udhayakumarchinnadurai310
3 жыл бұрын
Hello bro ..while im installing this driver it shows that "driver is already preinstalled" and then port remains the same gray color..what should i do ?
@Quick_Look
3 жыл бұрын
maybe your not having the driver issue and some other prob you can try this- (1) In tools - Board - see that proper board is selected ( If your using Arduino UNO then select Arduino UNO) (2) In tools - Programmer - select ArduinoISP and see (3) update/reinstall the Arduino IDE and check (4) sometimes it can be because of improper connection between Arduino and laptop(faulty cable)
@adithyaraj1433
3 жыл бұрын
@@Quick_Look bro I had done everything still I can't select port
@10054
2 жыл бұрын
@@adithyaraj1433 same.
@ridhvikthakur8932
4 ай бұрын
Same mine is also not working
@sangramn2567
3 жыл бұрын
in my case it says that the driver is already installed , still i am not able to select the port , and also not able to delete the existing driver and install it again ? what should i do ?
@anaaysahu
11 ай бұрын
did u get the solution to this problem cuz i have facing the EXACT same issue
@chillimadebeats
7 ай бұрын
@@anaaysahu did you find a solution, I am stuck on this
@Evaragaming
Ай бұрын
Did you get the solutions if yes. Please do reply
@sangramn2567
Ай бұрын
I just changed my laptop after a year , that's how i fixed my issue. New laptop has no issue.
@anirbanbiswas9504
3 жыл бұрын
Thanks a lot bro U saved my time.
@duanwenzel2232
23 күн бұрын
Tenho o arduíno ch340 e o shield porem aparece a porta normal conforme no vídeo mais nao reconhece o dispositivo em dfu, o serial aparece null vou testar esse método pra ver se funciona. Derepente se tiver alguma informação que me ajuda agradeço.
@superezhil
7 ай бұрын
Thank u வடக்கு நண்பர்😂😅
@nguyentien4711
3 жыл бұрын
dude, u totally help me after spending 5 hours on this port
@raingaming5233
2 жыл бұрын
Hey I need help I have a Mac and I have an arduino uno atmega 328p what should I do? Can you please reply
@harithkasuntha8595
2 жыл бұрын
thank you So much. you are a life saver. thank you many times 😄😄😃😃😃😃
@techyhit
3 жыл бұрын
Thanks bro...100% working
@1CavexDwellers
4 ай бұрын
Does not work
@StellarArete
3 жыл бұрын
Flippen saved me man. Thanks
@subbuyaswanth
2 жыл бұрын
I have a dought We have to connect the nodemcu board and chech or without connection we can chech.....
@Quick_Look
2 жыл бұрын
Yes..we have to connect Arduino and check
@user-zg1wq4yx7t
2 жыл бұрын
Thanks ! It helped me a lot❤️
@mr.jelectro6066
3 жыл бұрын
Dude i my porr not found then i see this video but its successfuly install but the port is still doesn't not show port☹️☹️
@VAISHALIDORANALA
3 жыл бұрын
Hey, Thank You so much. I was searching for the solution to this problem for many days. Now it is resolved.. :)
@unknownxyz7425
3 жыл бұрын
Mine it is not showing port option. May be it is because I didnt not connect to the board yet. Is it because of that?
@Quick_Look
3 жыл бұрын
Yes. You must connect the board for port to appear
@pjstarr1238
3 жыл бұрын
this worked! thanks!
@omgboy4939
2 жыл бұрын
connect arduino with other cable! it worked for me only on 2 cables out of 5 tested
@KEERTHANAACSE2022
8 ай бұрын
i can't able to install the driver....install failure nu varudhu....what can I do
@Quick_Look
8 ай бұрын
Prompt shows driver failure?? Or preinstalled?
@himamchakraborty803
2 жыл бұрын
Thank you so much, Sir.
@Im_killed1213
8 ай бұрын
it didnt work but i still belive this works i give a like and sub
@muhammadhassanasghary495
3 жыл бұрын
I realy appreciate you Thanksssssssss❤❤❤❤❤
@VinayKumar-vc7gz
Жыл бұрын
I dont know why its not working for me i tryed several time but still not able to enable the port option ...any other solution anybody plzz
@mrghost5854
3 жыл бұрын
thank you soo much, it worked 😁...
@shohivesdesignes7193
3 жыл бұрын
If the Arduino is not connected port will not be enabled? I'm having the problem
@Quick_Look
3 жыл бұрын
No!....you need to connect Arduino to enable the port
@edwincobriros3351
3 жыл бұрын
Thanks for sharing!
@yantrai
3 жыл бұрын
Thank youuuuu. You are the best
@shilparamisetty7307
3 жыл бұрын
Sketche uses 12% of program storage space..... I'm getting this error..what should I do
@Quick_Look
3 жыл бұрын
May be you need to update Arduino IDE to latest version...and if you are already running the latest version then try using old versions.
@elenaalmarez1078
2 жыл бұрын
thanks very helpful video
@technikfreaksmj5321
3 жыл бұрын
Does this also work with the arduino nano
@Quick_Look
3 жыл бұрын
Yes. Or else try downloading CH341 driver and see that in tools - board - proper board is selected
@technikfreaksmj5321
3 жыл бұрын
@@Quick_Look okay thanks, i have now solved my problem with the arduino nano too
@geraldtuplano1582
3 жыл бұрын
i check my device manager COM3 has a warning sign what should i do?please help me
@Quick_Look
3 жыл бұрын
Right click on it and select uninstall, then restart the PC ...Windows will reinstall the driver automatically, solving conflicts and other errors. Just try this
@penezicantonio
3 жыл бұрын
Thank you so much!!!
@parthaprotimdeuri8681
3 жыл бұрын
love you bro😊
@Physicsandanimation
3 жыл бұрын
great brother .
@Hanan-wm6oi
3 жыл бұрын
Driver installation is getting failed! I can't understand what's the issue plz help!
@Quick_Look
3 жыл бұрын
Arduino was plugged in ?
@Hanan-wm6oi
3 жыл бұрын
@@Quick_Look No it wasn't 🙊 Thanks a lot!
@chiragm1439
3 жыл бұрын
Dude.. I had installed the ch340 driver.... But then to it isn't showing the port....
@Quick_Look
3 жыл бұрын
you can try this- (1) In tools - Board - see that proper board is selected ( If your using Arduino UNO then select Arduino UNO) (2) In tools - Programmer - select ArduinoISP and see (3) update/reinstall the Arduino IDE and check (4) sometimes it can be because of improper connection between Arduino and laptop(faulty cable)
@dabblerrr7560
2 жыл бұрын
Can i ask how if driver install failure 🙏🏽
@sabhijith3827
Жыл бұрын
Same for nano?
@Quick_Look
Жыл бұрын
Yes I think
@adeshmore22
2 жыл бұрын
It's showing driver is successfully pre-installed but still port option is disabled
@payelbakshi4635
Жыл бұрын
What did you do.same for me
@KnowledgeProvider4U
Жыл бұрын
@@payelbakshi4635Hi do this: CONNECT YOUR USB REAL TIGHT. yes that was it, force it well into the arduino and you would get a nice connected sound . so follow this
@shlokshah5082
3 жыл бұрын
Its not working I'm using Arduino nano
@Quick_Look
3 жыл бұрын
In tools - Board - see that proper board is selected ie arduino nano
@lakshaypanchal7996
3 жыл бұрын
Solvers my problem great
@hunter_anton
3 жыл бұрын
You are god
@Urbangamers1
3 жыл бұрын
i cant fix it ...... says that is pre installed advance
@Quick_Look
3 жыл бұрын
1)If showing pre-installed that means Arduino is not connected properly...jst push the usb real tight into the Arduino OR (2) Uninstall the pre-installed CH3 from device manager and then install again
@premsaisiddi24680
3 жыл бұрын
Bro I have did what u say but it is showing ur drive is pre installed but port is not coming plz give me a solution bro plzz
@Quick_Look
3 жыл бұрын
Try this :- Connect Arduino with USB then go to device manager and under Ports you will find USB SERIAL CH340 ....right click on it and uninstall and then install again(as shown in video).
@mdmanzoor6941
3 жыл бұрын
Bro for me after extracting files when i clicked install, it says drive install failure
@Quick_Look
3 жыл бұрын
did you connect Arduino before pressing install?
@mdmanzoor6941
3 жыл бұрын
@@Quick_Look it’s working now mate 😂😂😂😂 my team mates messed up
@ahmadizzudin_1538
3 жыл бұрын
why my pc display pre-installed ?? im confused ?
@Quick_Look
3 жыл бұрын
maybe you're not having the driver issue and some other prob you can try this- (1) In tools - Board - see that proper board is selected ( If your using Arduino UNO then select Arduino UNO) (2) In tools - Programmer - select ArduinoISP and see (3) update/reinstall the Arduino IDE and check (4) sometimes it can be because of improper connection between Arduino and laptop(faulty cable)
@Saharsoon
3 жыл бұрын
Driver installer failure ...why 😔😔😔
@tinkmarshino
3 жыл бұрын
outstanding!
@blaisebimponda1727
Жыл бұрын
merci votre tuto ma aider
@AdityaKumar-rb8yw
3 жыл бұрын
Thankyou so much Sir🥰
@t.a.f.6736
3 жыл бұрын
The best ... thanks
@karanrai6772
3 жыл бұрын
It is working bro 🙂🙂👍👍
@mrharshyt4447
4 ай бұрын
Thanks ❤❤❤
@itzanimex3504
3 жыл бұрын
thank you so much bro
@VidyaSagar-bd4rs
3 жыл бұрын
It's working
@gamingguruyt200
3 жыл бұрын
bro port not showing even i installed ch30
@Quick_Look
3 жыл бұрын
you can try this- (1) In tools - Board - see that proper board is selected ( If your using Arduino UNO then select Arduino UNO) (2) In tools - Programmer - select ArduinoISP and see (3) update/reinstall the Arduino IDE and check (4) sometimes it can be because of improper connection between Arduino and laptop ie faulty cable
@astameliodas5047
3 жыл бұрын
still port is not showing in arduino programming help me out please
@Quick_Look
3 жыл бұрын
Have you tried other solutions as mentioned in video description!!?
@DareDevil-ql6ky
3 жыл бұрын
Is it working now, If yes then could you share some steps
@astameliodas5047
3 жыл бұрын
@@DareDevil-ql6ky now it's working
@astameliodas5047
3 жыл бұрын
@@DareDevil-ql6ky solution is so simple i buyed new cable from local stores
@DareDevil-ql6ky
3 жыл бұрын
@@astameliodas5047 great, thanks
@Mr_Plant06
3 жыл бұрын
hey I get driver install failure what do I do.
@Quick_Look
3 жыл бұрын
Did you connect Arduino before pressing install?
@Mr_Plant06
3 жыл бұрын
@@Quick_Look yes I did
@ericone7231
3 жыл бұрын
ur actually a fucking legend
@satyasaikirant2452
3 жыл бұрын
I did the same but my port is showing like that
@Quick_Look
3 жыл бұрын
(1) In tools - Board - see that proper board is selected ( If your using Arduino UNO then select Arduino UNO) (2) In tools - Programmer - select ArduinoISP and see (3) or update the Arduino IDE and check (4) sometimes it can be because of improper connection between Arduino and laptop
@satyasaikirant2452
3 жыл бұрын
@@Quick_Look i did the same but no use
@noelazilrangeherman6751
3 жыл бұрын
Does this also work on Mega 2560?
@Quick_Look
3 жыл бұрын
Installing Ch340 driver should work or else install Ch341 driver it worked for many users.
@bagavathi9428
3 жыл бұрын
An error occured while uploading the sketch please soving the problem bro please
@Quick_Look
3 жыл бұрын
Need to kn the error... what is the exact error? or you can mail me the screenshot of the error.
Пікірлер: 231