"Indigo" i will watch your all arduino lessons as long as you make
@aaronmilliman7685
2 жыл бұрын
AMEN! They are amazing!
@eb_dance1530
7 ай бұрын
We are using your tutorials for our Computing lessons (High school ENGLAND) and are really enjoying them so far. We have watched up to lesson 32. BTW INDIGO!!! Thank you Paul McWhorter! From Emmy. Year 8 England.
@paulmcwhorter
7 ай бұрын
EXCELLENT! Keep going, and then when you are done with these lessons think about taking the Raspberry Pi Pico W classes. Keep learning, and you will go far! Well done. Tell your classmates hello for me.
@wesleyselenaf1149
6 ай бұрын
@@paulmcwhorter"indigo"
@RobVollmar
Жыл бұрын
I didn't take that subtle hint from the last video to invest in more servos as seriously as it is now clear that I should have! I've got a couple more on the way. What I did do was hook up a red and yellow LED (never green, that's for special occasions!) and brighten and dim them along the X and Y axes. Then I got the idea to hook up an RGB LED to play with blending red and green similarly. I thought about connecting the blue line up to the switch but haven't spent the mental capital to figure out how to handle the pull up resistor function yet.
@waynedoman4165
23 күн бұрын
Indigo, you are still helping people get hooked into electronics and controllers. Thank you for caring enough to share your blessings.
@steveallsop9989
2 жыл бұрын
Indigo !!! Thanks Paul for a great series. I’m a 76 year old retired UK citizen who used to be in IT in yesteryear. I have to confess that the toggle switch logic tested my brain to exhaustion but I think I got there in the end. As a keen aero modeller I’m looking forward to the next servo challenge. Thanks for series Paul. Steve Allsop
@nayesha9375
3 жыл бұрын
Serial.println ("INDIGO"); Serial.println ("Thank you sir! I love your lessons");
@svjuiy1240
18 күн бұрын
*Serial.begin(9600)
@aungphyokyaw4475
7 ай бұрын
Indigo is your faithful guard. Always appreciate your guidance.❤
@JaydenSumbillo
Жыл бұрын
indigo please protect this good man, he is producing some of the best future engineers in the world
@noahb5019
3 жыл бұрын
"Indigo" - Engineer here. I got my dad hooked on Arduino, and he turned me on to your videos. Great stuff!
@bobrayme9983
Жыл бұрын
indigo is the bestest boy! So I'm a little late to the party but I've been following along so far. Have to say you are a really good teacher. From getting concepts across to informing on why and what is the cause and effect of each aspect of the different components. Thank you for all these videos on so many different systems. And still putting out new content. I have a friend who got your kit and showed it to me. I had mine ordered the next paycheck, lol. So we've been taking this class together. Been a long time since I've actually put some effort into learning something new. So again thank you, so, so much!! keep up the great work in all you're into! Cheers!
@joshhodges2311
3 жыл бұрын
Thank you so much for these tutorials! I recently got a job programming PLC's and visualizing circuitry and watching you explain how to solve problems has been massively helpful. Hope and Indigo are doing well!
@paulmcwhorter
3 жыл бұрын
Glad I could help!
@GeraldSalzman
2 ай бұрын
Hi Paul, Love the video, I am 80 years young/retired attorney. I doing the course using an STM32 emulating the Arduino. FYI STM32 at the pins is 3.3V while Arduino is 5v. This caused a bit of problem w this lesson: was not reading the SwitchPin, and the JoyStick values were wrong and did not recognize the changes in value when i moved the JoyStick. To fix the Switch in pinMode, I need: pinMode (switchPin, INPUT_PULLUP); for the JoyStick to work instead of using 5V input i utilized the STM32's 3.3V. These revisions fixed all. Now I will move on to the Servo. If there are issue I will post.
@MrBrotherchris65
4 жыл бұрын
This was a good opportunity to build my first wiring harness. I cut the indigo wire a little shorter than the others but it all worked out.
@EEBBSamarJain
2 жыл бұрын
Secret word for today was Indigo. I watch all you videos till the end, I like them so much!
@paulmcwhorter
2 жыл бұрын
Glad you like them!
@johnmichaeljones2600
4 жыл бұрын
Another great tutorial. As I always say as I’m pushing the wires into the breadboard “In de go” (sorry about that)
@erwinmuskens3149
2 жыл бұрын
Hi Paul! I wired up te joystick before the lesson started. Wrote the program tested it and it worked. then watch you do it. and changed the switch to HIGH not LOW. then i hooked up the servo and wrote te program to move the servo in X. switched X to Y and did the same thing( copy paste) to move Y. downloaded the program and BOOOOOM!!!. then watched the video till the end, the homework was already done. Great stuff! (Indigo,gogogogo !)
@MarcReeveNewson
3 жыл бұрын
If you use the Serial Plotter instead of the Serial Monitor and your x and y values are getting graphed in blue and red you can rapidly mix them to make a very light indigo.
@DaveMarriott-ue1oy
2 ай бұрын
Working my way through these videos and finding them so useful. The theory is proving so much more understandable than it ever did in class many moons ago. Have to say though Indigo seems an unusual name for a dog.
@geraldwhitmore6024
4 жыл бұрын
Indigo! Always watch to the end. New to your tutorials. Only been watching for a couple of weeks. Trying to go in order. You are a good teacher and make most of the material interesting. The math is tough for me so I struggle through that. Last time I did any math more complicated than balancing the check book was high school algebra 55 years ago. But I plan on sticking with it and then move on to build the robot car in your next series. Thanks for teaching. God bless.
@jakubkosior
2 ай бұрын
Indigo! Another day, another Paul's Tutorial :)). At the moment watching your tutorials has become a part of my daily evening routine. I have also begone to start my days with black coffee. With Ice only, no milk, no sugar, no sweetner packgages and no vodka ;) added haha. Keep up the great work! I am looking forward to your next videos!
@als.4568
4 жыл бұрын
I could rave about this lesson until I was “blue in the face” (or should I say “Indigo in the face”?) Thanks Paul!
@alansindoni2541
4 жыл бұрын
Indigo... new viewer, I very much enjoy your lessons 👍👍
@cjjones8414
2 жыл бұрын
I watch all of your videos to the end then review them. I have all of my lessons printed out to refer to. Thank you
@GeoGebweiler
4 жыл бұрын
"Indigo" - Great lesson again, Paul. Thanks a lot.
@VivekYadav-ds8oz
4 жыл бұрын
I couldn't think of a joke. Indigo.
@georgeshaiffer2246
3 жыл бұрын
I heard indigo for today! Normally watch almost to the very end, stop with a few seconds left as that make it easy to get to the next one. Gaining enough confidence to start over and run some of the earlier activities. Hardware is here!
@centralvirginialive
3 жыл бұрын
"My name is "Indigo" Montoya, you killed my father, prepare to die!" - (Inigo Montoya is a fictional character in William Goldman's 1973 novel The Princess Bride)
@uppunaveen
3 жыл бұрын
INDIGO. Great lectures and enjoying every lesson. Thank you
@vickeryramkellawan9206
Жыл бұрын
INDIGO, what an amazing dog. Thanks for these tutorials, you're empowering the next generation of engineers .
*lesson==awesome* and you forgot those important semi colons
@taylorjarvis4602
3 жыл бұрын
😂
@mosesmwihia8347
2 ай бұрын
Indigo. Paul is the greatest teacher/ trainer I have come across.
@alanfairclough8879
2 жыл бұрын
Watched all the way to the end INDIGO! I added the spaces for the formatting right from the go.
@johnhechtlinger9465
7 ай бұрын
INDIGO! This was another cool tutorial. You have joined the pantheon of my favorite tutors along with Bucky Roberts.
@Carob75
3 жыл бұрын
Another thankyou for your videos. With no experience and your videos, Ive used Arduino to control the direction and speed of a motor. Added push button cruise control. Then added a servo to control steering. My next step is to figure out how to go from prototype to finished project.
@Mrerrol13
3 жыл бұрын
Hahahahaha!!! Indigo doesn't seem to be stressed! That's fantastic!!! I hope it helps you in your precious work in Africa, Paul!
@vincentmarche9999
2 жыл бұрын
INDIGO ! Mr McWhorter I a following your courses and trying to replicate your projects . Sometimes I do it alone, and sometimes I check how you did it.
@sergiosilvaTuga
3 жыл бұрын
I'm "indigo" to all your tutorials (till the end) in order to learn Arduino. Thank You, Paul
@paulmcwhorter
3 жыл бұрын
Excellent!
@JohnTheModelMaker
2 жыл бұрын
I watch all of your videos all the way through. Sometimes twice. INDIGO!
@aaronmilliman7685
2 жыл бұрын
I added 10 spaces before Y & Switch, it made nice columns - easier to read.Pupper is Indigo and looks happy. Jumping on homework now. Just picked up 2 of your servos.
@user-bx8zb7sw2g
2 жыл бұрын
Hello Paul! Your lessons are great! Not only I watch them till the end(secret word:Indigo) but I also do the assignments.
@autocrosser10
7 ай бұрын
Indigo! always watch to the end! I did jump ahead to lesson 34 prior to 32. Completely understand how your using the internal pullup resistor in projects.
@zachhamersley967
3 жыл бұрын
Thanks for the lesson. Joysticks made easy! Indigo is the colour of your energy.
@nikhilnevrekar2896
2 жыл бұрын
Indigo! I have always been curious about the joysticks. Especially, when the one on PS controller goes bad. Now I know the exact working tech behind it, so no more banging the gamepad. Thank you so much :)
@urischimerling454
7 ай бұрын
Indigo. Thank you very much. We are also using your excellent Arduino tuitorials in our high school in Israel
@ParadoxicalLisa
2 ай бұрын
INDIGO! I'm happy to be back on track with the Arduino lessons after lapsing in my training for a bit. :)
@banyincam
4 ай бұрын
A friend of mine just gave me a box of old RC car parts. I took out the servos and have them ready for this project. Indigo!
@andrecoulter8126
Жыл бұрын
indigo - I watched 28-32 beginning to end. Enjoying your videos, sense of humor. I have to have some sweetner in my coffee. I don't like iced coffee, but room temp cofeefee.
@josleke1
3 жыл бұрын
Indigo!! BOOM!! Thanks Mr Paul for the clear, practical and educative tutorials.
@evanbudd649
7 ай бұрын
Indigo. Re-watching the series while I wait for the wifi stuff to come out in the new R4 wifi series. Great stuff. Looking forward to more. Thanks again.
@ravishankarkumarparibrajak4754
Ай бұрын
indigo, sir i watch your all video till end as they are so insightful and interesting!!!
@gabrielegwell6457
2 жыл бұрын
INDIGO!!!! Thank you Paul, I am absolutely in love with your lessons.
@paulmcwhorter
2 жыл бұрын
My pleasure!
@haseenmultimedia3103
3 жыл бұрын
"indigo". This was the first video I watched from you. I loved it.
@Enzontinkfas
10 ай бұрын
Yes sir, I watch every video to the end indeed, or should I say INDIGO? Thank you very much for your work!
@grahamovermyer5987
Жыл бұрын
As a guy who grew up playing a lot of video games I really enjoyed learning how the joysticks actually work. The analogy to a potentiometer is perfect! Love this series and am very excited to start controlling physical outputs with the joystick. Can't wait for the next time I sit down and learn to control the servo with the joystick
@grahamovermyer5987
Жыл бұрын
The secret word is indigo
@paulmcwhorter
Жыл бұрын
Very cool!
@santeecooperresortarc3790
3 жыл бұрын
Paul, LOVE the videos. Retired EE after 40 years, working for DoD. My Rat Terriers Cooper and Blue watch the videos with me and barked at Indigo. GREAT series, and as other have said, I wish my college professors had been as down to earth as you are! I do the homework on my own, brings back memories of the old IBM 029 Punch machines and System 360/370 from college. Great to have instant feedback now on the compilation results instead of waiting two hours only to find a typo. This is without a doubt, the best $35.00 I have EVER spent! Thank You!! ---Ace
@funnytorque1693
Ай бұрын
Hi Paul I am here watching your lessons after 4 yrs. Thank you so much. "" Indigooo ""
@michaelcox1225
Ай бұрын
Me too I'm following with the r4 class to I'm having a problem with the part of the lesson where the sPin is showing power to get the pullup showing any ideas how to fix it
@drbirdleaf2574
11 ай бұрын
Fortunately I didn’t panic about servos since I still have my RC car stuff from the 90s. It’s amazing sometimes how something can hang out in a toolbox of small parts from my teenage years, follow me around into my 40s and I still knew exactly where to look for it, wipe off the dust and put it to work. Indigo would probably say that’d be a long time in dog years, lol.
@nguyentranvantien8028
Жыл бұрын
You have such a peaceful home compound and a faithful guard dog - Indigo
@ishowslave
5 ай бұрын
INDIGO. Your lessons are great! Greetings from Ukraine, Mr McWhorter and thank you for teaching us!
@jerrylindner9494
3 жыл бұрын
Indigo, Yes I watch these lessons. Being a disabled shut-in I can not work out in my shop anymore. I was a machinist so now my interest has to change to something that can be done inside the house. Automation and it's control is very fascinating and important to the world we now live in. BTW I am drinking a coke not coffee.
@HyppyWayfarer
2 жыл бұрын
For some odd reason I keep using the Indigo wire to connect to the servo motor - great tutorial. I'm a software developer who wants to learn about the micro controllers, and I'm loving this series. Keep up the great work!
@skymafin6464
Ай бұрын
i absolutely love your videos, i would recommend to anyone struggling with Arduino program to view your videos.
@skmplanet9591
2 жыл бұрын
Indigo. Till today working of joystick was a mystery for me, now solved. thanks a lot.
@aurimasmiko2211
2 жыл бұрын
INDIGO!!! Some things are so simple when you know how they work, and possibilities can be limitless with a good ideas! Joystick is just 3 simple components, but gave us so much joy! The first Idea which came to my mind is to make a circle of leds and control them by the joystick! Thats my own task for tomorrow ;)
@paulmcwhorter
2 жыл бұрын
So true!
@muhammadrafiqulislamkhan6994
2 жыл бұрын
I watch your video over and over again. Thank you.
@shmoe820
8 ай бұрын
Another great lesson Paul! I did watch until the very end. I am excited to keep trying new circuits and code, so I skipped ahead only to be stopped dead in my tracks by the digitalWrite(sPin, HIGH); code that is in the void setup. I was feeling tired, so I had to wait until today to try again. First I decided to make a potentiometer circuit that lit 5 LEDs at different voltages, and then tried this lesson on the joy stick again. I was more patient and watched you write your code, and that's where I saw what was different between your code and mine. And then it worked!! I exclaimed "Indigo!!" and woke up my neighbors. Oops :) Too much iced coffee today. The repetition of starting the circuit and code from scratch is tremendous for my learning. I thought I would need to have a cheat sheet for the commands that you commonly use, but I am starting to memorize them, and it is an amazing feeling. Thank you!
@TheSelfUnemployed
2 жыл бұрын
I watch all your videos to the eNd! you are an inspiration to me anD I can not thank you enouGh for all that you dO for us here on youtube! Thank you Paul and God bless!
@eastcoastbreed5511
9 ай бұрын
Thank you! Yes, All the way to the End, Indigo Pup. Without You Paul, I would have a bunch of junk in a plastic tub.... We need more teachers like you !
@RDX-Cyclonite
2 жыл бұрын
Extremely usefull tutorials Paul!! I am watching it in 2021, almost 2022 hahah. Greetings from Spain!!
@bg7370
9 ай бұрын
I really love your "under the hood" explanations. I wanted to do mechatronics engineering when I was in school, but ended up doing software development instead. I like the software world, but electronics fascinates me a bit more. Thank you for the most excellent master classes here on KZitem. Also, indigo.
@GauravDeshpandepune
3 жыл бұрын
I watches your videos all the way to the end.. Sometimes twice. Thanks... Indigo..
@paulsheehan2105
3 жыл бұрын
Indigo! Hi Paul, I'm working through your videos and watch them all right to the end. Fantastic work, thank you Sir
@kwikcarl1
2 жыл бұрын
Yes I saw Indigo. Thank you Paul for taking the time to do these videos!
@paulmcwhorter
2 жыл бұрын
My pleasure!
@mdrashedulislam8995
3 жыл бұрын
"Indigo" is the secret word. I really love your lectures. You are the best teacher.
@user-ng4my8kh3d
8 ай бұрын
Indigo. I absolutely love these videos. I had shelved my arduino until I found your videos. Thanks so much for putting these out.
@paulmcwhorter
8 ай бұрын
Great to hear!
@Flugal007
2 жыл бұрын
Your teaching is fantastic and I am learning so much - rgb(75,0,130)
@georgem9375
3 жыл бұрын
I dont think there is a single one of us that dont watch your videos to the end Paul! Great stuff consistantly ! indigo all the way!
@md.mizanurrahman5852
Жыл бұрын
Dear Paul, Thanks for the tutorial. I have gone through the tutorial till the end. The word indigo was a great selection.
@toolooselowtrek7523
Жыл бұрын
I watch everything to the indigo!
@toolooselowtrek7523
Жыл бұрын
ordered new servos
@bradkarain1937
10 ай бұрын
Sky was indigo this evening. It was beautiful.
@schaduwfarspire9493
2 жыл бұрын
Indigo, as a video gamer, I really liked this lesson. Thank you.
@erikburman530
2 жыл бұрын
Kihindi. Three years later and people are still learning. Thank you so much!
@zx600e93
11 ай бұрын
Lola is my Indigo 😊 Thanks, for explaining how the joystick works. I can't wait to use my Arduino soon.
@satisfactoyz
3 жыл бұрын
85% of the time, I go to end all the time ... Also, Indigo looks like a faithful companion. Thanks for another good one, Paul.
@paulmcwhorter
3 жыл бұрын
Thanks for watching!
@theotrg2371
3 жыл бұрын
Of course we watch all of your videos to the end Mr Paul and we really appreciate your hard work and your amazing tutorials. I cannot understand why there are always some dislikes in your videos. You really dont deserve them! I am not gonna say Indigo to prove that i watched the whole video, but I just did😉😁.Love you!!!
@paulmcwhorter
3 жыл бұрын
Awesome! Thank you!
@Jack-cx8tj
2 жыл бұрын
Well i just binged from episode 0-32 today, time well spent.
@sandwon
2 жыл бұрын
Indigo I enjoy the simplicity of your code writing.
@abdokhaled5558
3 жыл бұрын
"indigo" As a citizen in Egypt, finding a path to pursue my passion is very costly, but you really removed this burden. I owe you a lot. Thanks
@paulmcwhorter
3 жыл бұрын
Wonderful to have a subscriber from Egypt.
@RavenTech1
2 жыл бұрын
I used to play my playstation using a controller and now I'm learning how its little joystick works, and i have a great teacher who teaches stuff without complicating the topic and is easy to understand and learn.
@SimpleHumanInNY
2 жыл бұрын
“Indigo”- the most faithful guard dog” watched till the end sir :)
@richthofen9592
5 ай бұрын
Indigo! Thanks to you I´ve finally learnt about how the Joysticks work. This one was an interesting lesson to me, because I am fan of all which concern about videogames and the controller use 2 Joysticks, Joysticks which were the strangest from the controller, because I easily understood that many of the buttons were some kind of pushbutton except for the Joysticks. Then, having fun with the arduino and you, I finally find and explanation and some minutes later I program one Joystick
@paulmcwhorter
5 ай бұрын
Great to hear!
@kirubeltekle9553
Жыл бұрын
Paul: INDIGOOOOO Indigo: Mcwortererr
@hachimankmd5843
3 жыл бұрын
"BOOM" indigo and "BOOM". Worry not, we're faithful and we always watch till the end. By the way. I'm an African and I live in Africa. Thank you.
@knowlzy0791
3 жыл бұрын
2021 and I am still watching Paul! INDIGO INDIGO INDIGO
@abhinavshetti1205
2 жыл бұрын
When you talked about the laser project .... A wave of excitement travelled through my body multiple times. I can still feel it as I am typing this . All hail Indigo 😂😂
@moosasarwar3118
Жыл бұрын
Woah!! I never knew indigo is such an intresting project controlled by a joystick.
@gavinpeddie6706
2 жыл бұрын
Indigo! This fall I will be building a musical fountain for my senior design engineering project! I will need to use lots of servos and LEDs. Your videos have been very helpful in learning how to control and use different circuit elements!
@paulmcwhorter
2 жыл бұрын
Wonderful!
@HaseebAdnan0
10 ай бұрын
Please make more videos on this kit, more than half of the stuff in the kit is unused. Meaning that you could probably make more than 50 videos. Your version of the explanation is better than any teacher and although there is tutorials by elegoo, they dont go in depth. Plus we havent really used capacitors and transistors(I did go check the future videos so to know what equipment you have used)
@coreon1810
Ай бұрын
"Indigo". Amazing Lesson. Thank You
@omkarbansode6305
Жыл бұрын
" Indigo " This one Tutorial was a pretty Easy one, so definitely I loved It
@paulmcwhorter
Жыл бұрын
Glad you liked it!
@jpbefx
9 ай бұрын
Hello professor, you have a beautiful home, I'm sure indigo is the happiest a pup can be. I'm greatly enjoying following your lessons. Please never stop being your wonderful self, as it is much easier to connect with the lessons, given your personable approach and volumes of information. Any naysayers who name you to change to omit the diagrams and may are simply lazy. I've been known to go through a video or two multiple times and skip the extra stuff just to get back to the tiny bit I need to recap on. That's why there's a time bar absolve to scrub through. Thanks a million! God Bless! -J.B.- P.S. I can't wait to advance into your Raspberry Pi lessons. But, one step at a time. 😊
@kasozivincent8685
3 жыл бұрын
Indigo. Thank you Paul. It is my second day but I have watched up to 32 videos. Great content.
@paulmcwhorter
3 жыл бұрын
Great job!
@taylorjarvis4602
3 жыл бұрын
Índigo Sounds like a pretty stellar dog... I watched to the end and I enjoyed every second of it ( had to pause the vid too many times to count though...)
Пікірлер: 1,9 М.