thank you your the reason why i didnt have to cry mysef asleep tonigth
@Thetips4you
2 жыл бұрын
You are welcome. why should you cry?
@nayansawarkar4471
7 ай бұрын
Helpful Sound of buzzer is also working
@Thetips4you
7 ай бұрын
Thank you
@mehzall
Жыл бұрын
Hi! Amazing video. Thank you for giving a really in depth explanation on each part. I would love to know, why do we need the resistor to connect to the ground? What if we just connect the LED and Buzzer's positive terminal directly to the ground?
@Thetips4you
Жыл бұрын
You need to control the current flow. If led and buzzer can accommodate the current flow you can connect directly.
@johnpaulogenesisaquino5052
3 жыл бұрын
Hello, i just watched the video its so helpful for me because i ca use this to program my project, but may i ask, is it okay to use ultrasonic sensor rather than RIP sensor? And any kind of buzzer will do right?
@Thetips4you
3 жыл бұрын
Yes you can use ultrasonic sensor however you will have to change the code. Ultrasonic is usually used to calculate the distance as well.
@johnpaulogenesisaquino5052
3 жыл бұрын
@@Thetips4you at what part should i change the code, can you guide or something? Thankyou so much
@johnpaulogenesisaquino5052
3 жыл бұрын
@@Thetips4you can you help me modify the previous code? So that it would be suitable for ultrasonic sensor? Thank yoou so much❤
@Thetips4you
3 жыл бұрын
Sure I can help. Pls contact me through fb @thetipsforyou.
@silvawolflova
4 жыл бұрын
Hello again! I followed the demo, and the pir sensor is detecting, but the buzzer and led are not lighting up and sounding off. Any idea what happened? DId i not connect the wires correctly?
@silvawolflova
4 жыл бұрын
kzitem.info/news/bejne/0p2DqqKvqmJ3qm0 No audio or led lighting up. Or maybe i did not connect it correctly?
@Thetips4you
4 жыл бұрын
Can you send your circuit to me in Facebook "thetipsforyou". let me have a look.
@aliabdali7997
3 жыл бұрын
Thank you so much it was extremely helpful
@Thetips4you
3 жыл бұрын
You are welcome friend. Thank you for your feedback.
@aliabdali7997
3 жыл бұрын
@@Thetips4you I had an assignment that was hard but this helped me alot 😁
@Thetips4you
3 жыл бұрын
@@aliabdali7997 Nice to hear. Best wishes for your assignment.
@HarshRanjanA
2 жыл бұрын
Sir it work but I want it to stop faster. I mean after detected the hand it is working for 2 minutes. I want it to work for 5 second and the stop. Pls tell how to do it
@Thetips4you
2 жыл бұрын
Change the duration in the code
@HarshRanjanA
2 жыл бұрын
Sir what is the range. How can I decrease it
@Jai-dl6hi
3 жыл бұрын
I did everything you did including the correct code but my buzzer and led lights turn on even though I don’t move my sensor, any idea how to fix it and only make the led and the buzzer ring when the sensor is moved?
@Thetips4you
3 жыл бұрын
Can you contact me through fb "thetipsforyou". I can have a look on your circuit and code.
@Thetips4you
3 жыл бұрын
@Vajresh Kundurthi You can define the pins by default as Low in Void Setup, or also check if the PIR Signal pin is connected properly. it should not be getting High value always which will case this issue.
@jort.thijssen3314
3 жыл бұрын
@@Thetips4you how would you do that? And what code should I write for that? Because I have the same issue
@Thetips4you
3 жыл бұрын
@@jort.thijssen3314 In the Void Setup , add Digital Write to Low for the pins which are connected to LED and Buzzer, PIR sensor. Also please double check your PIR sensor Pins connected. if you connect 5 V to signal pin it will always give high output.
@jort.thijssen3314
3 жыл бұрын
@@Thetips4you can I maybe text you on anything? Because I am still kinda stuck with it haha
@romankarki5041
3 жыл бұрын
Thanks
@Thetips4you
3 жыл бұрын
You are welcome
@sweetyhearty6691
3 жыл бұрын
So helpful
@Thetips4you
3 жыл бұрын
Thank you. Glad you think so!
@mrricer95
2 жыл бұрын
Hi sir can i ask. Pir sensor can do wakeup system like security lock with motion ?
@Thetips4you
2 жыл бұрын
Yes. If you have the other required devices as well.
@mrricer95
2 жыл бұрын
@@Thetips4you how ? can yout teach me
@Syncz1712
Жыл бұрын
can i add lCD this circuit? please tell me how and where?
@Thetips4you
Жыл бұрын
Yes you can. Please refer my videos on lcd.
@HarshRanjanA
2 жыл бұрын
What is 500 Is it in seconds or milliseconds. Pls help
@Thetips4you
2 жыл бұрын
Yes it is millisecond
@imanzainal9256
3 жыл бұрын
hi can you paste the coding here
@Thetips4you
3 жыл бұрын
Please check the video description, the code is available in the GitHub link.
@imanzainal9256
3 жыл бұрын
thanks👌🏻
@michaelhiggins5361
2 жыл бұрын
I get an error on void setup line why
@Thetips4you
2 жыл бұрын
What's the error?
@michaelhiggins5361
2 жыл бұрын
@@Thetips4you Hi on the digital Write line expected construcor or destructor before '{' token
@Thetips4you
2 жыл бұрын
Please contact me through Facebook or Instagram. Kindly send the screen shot of error
@mokkababy5877
4 жыл бұрын
coding pls
@Thetips4you
4 жыл бұрын
Hello Friend, Kindly get the code from the github link mentioned in video description.
@jhaymine5416
3 жыл бұрын
Good day friend, I have one project how can I contact you.
@Thetips4you
3 жыл бұрын
Hello friend, pls contact me fb@ thetipsforyou or in Instagram Thetips4you
Пікірлер: 55