I've returned to this video several times as I've got the same anemometer, and have set it up in a similar way. On top of my shed though. !!
@ScienceFunInnovations
9 ай бұрын
Glad it helped!
@MarioCrispino
3 жыл бұрын
Love the way you tested the Anemometer. Great video. I might include this anemometer in one of my video projects. It seems quite a straightforward process, some of the other anemometers out there seem more complicated. Many thanks
@ScienceFunInnovations
3 жыл бұрын
I did get a few funny looks driving down the street... :-)
@MarioCrispino
3 жыл бұрын
I'm not surprised, great stuff! I think you should have put an even bigger one on the roof. That would definitely have got some strange looks. Keep up the great work.
@RobotoForgoto
Жыл бұрын
Hey man! I dig your channel. I have either made or wanted to make several of you projects independently! You probably do it better!
@ScienceFunInnovations
Жыл бұрын
I'm mostly learning as I go. Enjoy!
@gjonymacarony
8 ай бұрын
Hello Thank you for this video. Will this anemometer work in a tube?😅 I'm thinking to measure the heart recovery ventilation air flow..
@ScienceFunInnovations
8 ай бұрын
It should. You would just have to adjust the values for the interference from the tube.
@syaduinotech3681
3 жыл бұрын
Thanks for sharing sir.. I am newbies.. can you help recommend any lcd tutorial setup. Tq sir
@ScienceFunInnovations
3 жыл бұрын
Using an I2C module makes it much easier. Try Robojax kzitem.info/news/bejne/0m-PqZN9j3qqaHY
@syaduinotech3681
3 жыл бұрын
@@ScienceFunInnovations thanks sir
@prov_s195
3 жыл бұрын
Thanks! my school project is now completed! weather station
@ScienceFunInnovations
3 жыл бұрын
Nice work!
@cometmace
4 жыл бұрын
can that anemometer be mounted sideways (90 deg from vertical) and still produce consistent readings, albeit different from a vertical mounting. I less interested in wind speed and more interested in whether there is any airflow rising in a vertical column that exceeds some threshold (zero really).
@ScienceFunInnovations
4 жыл бұрын
Yes. It can be mounted in any orientation.
@tarunsaxena8490
Жыл бұрын
Did you try to open it to reveal which DC toy motor is used inside? If yes, kindly let us know the motor model or pic of the motor. Many thanks
@ScienceFunInnovations
Жыл бұрын
I haven't opened it up. I don't think it would open without breaking the plastic.
@tarunsaxena8490
Жыл бұрын
@@ScienceFunInnovations Thanks for replying. Possibly would you be able to test it as a motor by applying DC voltage from a variable supply source to check it working i.E operating voltage, current, RPM, and coil's internal resistance probably it will be easier to find the motor without physically looking at the motor. Thanks again, really appreciate you replying back to my comment
@glower4273
3 жыл бұрын
How does your yellow fan do? Can you make your own video about it? because it's expensive to buy and I want to build that fan. Thank you so much.
@ScienceFunInnovations
3 жыл бұрын
It seems to just be a regular DC motor with a windmill. The voltage from the motor increases with wind speed. There are some videos on KZitem on how to make your own using plastic Easter egg shells. Good luck!
@glower4273
3 жыл бұрын
@@ScienceFunInnovations thanks for your comments, have a nice day
@andreyl2705
Жыл бұрын
nice work)
@ScienceFunInnovations
Жыл бұрын
Thanks 😁
@ayahesham1685
3 жыл бұрын
I'm still a beginner on using Arduino, how do I get the corresponding 5V logic values?
@ScienceFunInnovations
3 жыл бұрын
Speed vs. Voltage? The manufacturer included a table of speed vs voltage.
@ayahesham1685
3 жыл бұрын
@@ScienceFunInnovations thank you for your fast response. I meant the values on column “D” on the excel sheet, how did you get these values?
@Stubby0266
2 жыл бұрын
Could you provide the list of libraries and show how to upload the code for the Ardunio?
@ScienceFunInnovations
2 жыл бұрын
Sorry, it has been too long since I wrote that code and I can't find the files.
@goncalotr
Жыл бұрын
as others asked, can you provide the lcd.h library file
@ScienceFunInnovations
Жыл бұрын
Oh man, that was so long ago. I think I just got it from the library manager in Arduino, think it is called LiquidCrystal now. That's the only library that I have installed.
@marvins.betita2013
4 жыл бұрын
How can you code IT If you use 7 segment display
@ScienceFunInnovations
4 жыл бұрын
I haven't done much with 7 segment displays. Perhaps a future video...
@arifzaqwan2587
4 жыл бұрын
Can i have the coding
@ScienceFunInnovations
4 жыл бұрын
//Connect gnd to gnd, Vcc to 5V, SDA to A4, SCL to A5 //Connect anemometer red to A0 and yello to gnd #include #include #include #define BACKLIGHT_PIN 3 LiquidCrystal_I2C lcd(0x27,2,1,0,4,5,6,7); float windspeed = 0.00; void setup() { lcd.begin (16,2); lcd.setBacklightPin(BACKLIGHT_PIN,POSITIVE); lcd.setBacklight(HIGH); lcd.home (); lcd.setCursor (0,0); lcd.print("Wind Speed (MPH)"); pinMode(A0,INPUT); } void loop() { windspeed = (analogRead(A0) * 73.0 / 512.0); lcd.setCursor (0,1); lcd.print(" "); lcd.setCursor (0,1); lcd.print(windspeed); delay(500); }
@RobsterCWell
3 жыл бұрын
LCD.h isn't defined for some reason
@ScienceFunInnovations
3 жыл бұрын
Are you getting an error message?
@RobsterCWell
3 жыл бұрын
@@ScienceFunInnovations the error says that it couldn't find the LCD.h in the library.
@vianeyximenamartinezvite2848
3 жыл бұрын
@@RobsterCWell hey, did you know how to charge the LCD library?
@RobsterCWell
3 жыл бұрын
@@vianeyximenamartinezvite2848 maybe it's because his version was different than mine. But once I got the code written, the error message said that the LCD header was missing. I was just following the error message.
@johnpaultrongcoso68
2 жыл бұрын
@@RobsterCWell I got the same error as you do, how did you solve it?
@lucasdubuis8932
2 жыл бұрын
Hey men i need the librairy what u use can u drop me in com pls =)
@ScienceFunInnovations
2 жыл бұрын
Which library? The one for the LCD screen?
@Stubby0266
2 жыл бұрын
@@ScienceFunInnovations Which file library did you use for LCD.h? I have downloaded a few for the screen type and LCD and still won't compile.
@Stubby0266
2 жыл бұрын
Also it doesn't like the set Backlight line, lcd.setBacklightPin(BACKLIGHT_PIN,POSITIVE), dosen't understand "POSITIVE".
Пікірлер: 45