7:15 for the thumbnail gents! Super clean jeep btw brotha! 🥵
@NotSoRusty1
2 жыл бұрын
Love my KDBs on my JK. Nice that they make the JL/JT with the signals. Best looking fenders I've seen AND plastic is ALWAYS better than metal!
@aguywithajeep
2 жыл бұрын
Definitely one of my favorite designs for sure!
@ttorski
Жыл бұрын
I just got those, I will be replacing rusted dv8 so hopefully I can use old hardware. Im also going to linex those fenders so they will have that rugged look and wont fade. Looks good
@aguywithajeep
Жыл бұрын
These are getting painted to match the body color very soon
@Chief_Chavo
Жыл бұрын
Yess. RUST. These are perfect
@davidlomax8902
Жыл бұрын
Great video! In closing that was pretty funny when you said, "Don't forget the washers." Of course, you could have reshot and just edited another video; but at the same time, I appreciate your honesty. Thanks for sharing your most recent Jeep mod.
@aguywithajeep
Жыл бұрын
Thanks for watching. I just roll with the punches here. I’m no expert but I figure most people watching aren’t either so why not share the experience.
@jaycrane761
6 ай бұрын
Awesome not a huge fan of such a narrow fender but I love the turn signal and it looks pretty dang good on that Jeep you might of just changed my mine on a plastic narrow fender! Thanks for video and keep up the good work thanks
@billgood8643
17 күн бұрын
No rust, no dents, lighter than steel, no drilling or nut sert stuff, adds clearance and articulation and look great, sold !!!
@x0Diesel0x
Жыл бұрын
Came looking for fender alternatives.. left with some real chill music finds!
@markbisdak
2 жыл бұрын
Man thank God i found ur video.. been searching for the perfect fender for my jl.. ✌️
@williamheinsinger7390
3 ай бұрын
Just ordered them for My 23 Gladiator Willys ✌️🇺🇲
@josephcamelo5914
Жыл бұрын
I have those flares on my JT and I love them
@trisnousman112
Жыл бұрын
Do the turn signal plug and play? Or need to modified it? Thx
@BluemoonJeepwranglerJLU
3 ай бұрын
How have they held up any offroading ? Was wondering about off-road how they'd hold
@DarrylCox-m6x
10 ай бұрын
Looks really good👌 Fenders look good too.
@ThomasCallahan9
2 жыл бұрын
Wish I found this video sooner just bought a set of rough country fenders and inner liners
@georgeking2770
10 ай бұрын
just ordered some for my JT. been looking for fenders for 3 weeks
@brianclifford9652
Жыл бұрын
Looks nice,I like the kbd fenders.
@Anthony-mq5gt
Жыл бұрын
What grill do you have? That looks crazy sick
@jrgarcia4371
5 ай бұрын
Did you custom order those with the led light bar at the front of the fender? I don't see that option on their website. Let me know what you used or did to get that as an option, love the modern look.
@aguywithajeep
5 ай бұрын
The JL version comes with the lights. The JK version does not
@willd4965
2 жыл бұрын
Great video man
@orhancaliskan105
2 ай бұрын
Hey brother awesome wrangler had a question I want to order those for my 21 unlimited rubicon the webpage shows them with a glossy black finish ? So they come like a flat color ? Any info would help
@aguywithajeep
2 ай бұрын
The material has a little shine to it but it fades quickly if it’s not protected. You can paint them though if you prep them right
@GabrielMiranda-xh3go
8 ай бұрын
Hey guys I’ve had these for a little over a year now . Have you guys had issues with the LED strip ? I’ve had to replace the lights twice now .
@aguywithajeep
8 ай бұрын
The only issue I’ve had was hitting one into a tree and breaking it. Swapped it out and it’s good to go again.
@giantkylec
Жыл бұрын
I’m considering these. I’ve been running the hammerhead deletes since the Jeep had 200 miles on it. Tired of zero flare. You love them still?
@aguywithajeep
Жыл бұрын
Yeah still love them. The finish faded a bit but no big deal to me
@giantkylec
Жыл бұрын
@@aguywithajeep yeah, i'd have to leave them raw. We wheel a lot and the paint would just crack off as soon as i flexed it.
@avllyric
11 ай бұрын
Mine should be here Wednesday. Can't wait!
@wildwoody20
11 ай бұрын
You have to buy inner fenders? What worked best with them on the inner fenders there's so many different brands of inner fenders out there they're so overpriced which ones did you go with
@aguywithajeep
11 ай бұрын
Yes you’ll need inner fenders. We went with cheap ones from Amazon and they are terrible. I’d spend the money for some Skull Krusher or Artec inners
@gabrielmiranda9825
2 жыл бұрын
Looks bad ass ! Just ordered my fenders on Sunday.. How long did they take to arrive for you?
@aguywithajeep
2 жыл бұрын
They got here in about a week if I remember right
@maverick_jl
Жыл бұрын
I see you've got some rock lights on the Red JL - happen to have a video on that install? I've got some that I haven't installed quite yet and I'm trying to figure out how to run the wiring to the harness w/out it being a major pain in the ass... TIA!!
@aguywithajeep
Жыл бұрын
Had to get those on quickly before Tennessee this year so I didn’t have time to film it. It was as annoying as you’re expecting it to be 😂
@maverick_jl
Жыл бұрын
@@aguywithajeep haha yah I bet & I’m kind of dreading it but - just wondering if you ran the wiring inside/over/underneath the fender liners - wasn’t sure and couldn’t get a good enough look. Thanks man, really enjoy your videos!!
@maverick_jl
Жыл бұрын
@@aguywithajeep 🧲
@rickypalomares9786
7 ай бұрын
Did you ever solve the turn signal light issue? Was the load equalizer and tazer combo the fix?
@aguywithajeep
7 ай бұрын
I never messed with it but that should work
@rickypalomares9786
7 ай бұрын
@@aguywithajeepdid you ever get the light to go away?
@aguywithajeep
7 ай бұрын
@@rickypalomares9786no I never messed with it after that install
@BluemoonJeepwranglerJLU
3 ай бұрын
How they hold offroad
@elginwang1572
8 ай бұрын
Nice. I read somewhere that it needs a Tazer to make it plug and play or make it sequential? Is it true?
@aguywithajeep
8 ай бұрын
The sequential worked for us right out of the box. I did change the turn signals to LED with the Tazer but I still get turn signal out lights so I probably need to add the resistors
@FailureToReport
3 ай бұрын
@@aguywithajeep Did you end up adding the resistors? I'm electrically r-worded and I have no idea if it matters which end of the resistor goes to which end of the KBD pig tails.
@aguywithajeep
3 ай бұрын
@FailureToReport nope never did. There are two open wires coming from the kbd harness though that you would add the resistor into if I remember correctly
@jeepdoctv
2 жыл бұрын
Looks super easy to install!! What about mud and rocks hitting the body?
@aguywithajeep
2 жыл бұрын
Not a concern for us really. I’ve never been a full fender guy so you take the lumps that come with minimal coverage. I generally go for the narrowest designs when I choose my fender flares
@aaalojzy
Жыл бұрын
Hi. does this type of fender with lights also fit the jk or only the jl???
@Aceinfinity-le8zc
Жыл бұрын
Did you get a turn signal out warning ?
@ChristobalCarranza94
Жыл бұрын
Anyone know how well the fenders will do on the sun ☀️? I’m in Modesto,Ca and it’s like 105
@aguywithajeep
Жыл бұрын
They hold up fine but they will fade overtime like any plastic trim piece.
@johnnyvillanuevaramos3174
Жыл бұрын
Hello Nice Video! Quick question do these fenders can be paint it with something like raptor liner? Thanks
@aguywithajeep
Жыл бұрын
Yes they can be painted
@jaymo9392
2 жыл бұрын
Just wonder whuch state you from? Im planning to get the same fender but not sure if it will be legal on the highway. Im from MN.
@aguywithajeep
2 жыл бұрын
South Carolina, so no coverage laws here
@Nitro91
11 ай бұрын
Did your jeep come with hologen lights ?
@aguywithajeep
11 ай бұрын
Yes. If I remember correctly the turn signals have in line resistors so they don’t hyper flash
@maverick_jl
Жыл бұрын
Are the turn signals sequential? Imma bout to pull the trigger on some myself!!! Great video!!
@aguywithajeep
Жыл бұрын
Yep, they are.
@jadef6784
4 ай бұрын
😮🙌🏼💯look Sicc AF🐶🤙🏽😍
@Intentsrig
10 ай бұрын
Did you ever add the resistors?
@aguywithajeep
10 ай бұрын
I didn’t but I need to
@Intentsrig
10 ай бұрын
@@aguywithajeep Yeah I tried just using the tazer but it didn’t work. Worked on the JL with rubi fenders but not the JT with these. Bought some of the sylvania ones they recommend on their site.
@wildwoody20
11 ай бұрын
look good but seem really small with no coverage
@aguywithajeep
11 ай бұрын
That’s my preferred style for sure.
@alexkaa6351
Жыл бұрын
What brand is your inner liners?
@aguywithajeep
Жыл бұрын
They’re EAG with a custom plate to cover their logo
@matt-hz6ho
Жыл бұрын
I just installed the KBSs on my 2021 JL with the led light kit which has the white DRLs. I was hoping these lights would come on as DRLs but they only work when the headlights are on. Anyone have a hack for having these come on as DRLs?
@aguywithajeep
Жыл бұрын
You can use the JScan app or a Tazer to change the settings and make them turn on a DRLs
@matt-hz6ho
Жыл бұрын
Thanks for the quick reply. I’ll try the jscan first. Did you end up posting a video of adding the resistor to eliminate the hyper flash in turn signal? Ours is saying turning signal light out and blinking super fast. Thanks,
@aguywithajeep
Жыл бұрын
@@matt-hz6ho never did get around to it. I tried turning on the LED turn signal package on the Tazer but it didn’t fix it so we’ve just been dealing with it
@wildwoody20
11 ай бұрын
I just wonder how long it will be till they fade though I mean two or three years that went to buy more can you put something on them to stop the fading like the factory ones I mean if you get still ones you don't have to worry about them fading You can always put conditioning on them and they'll turn black again
@DavoWright
Жыл бұрын
Does anyone know how the KBD fenders hold up to cold sub freezing temperatures?
@aguywithajeep
Жыл бұрын
Haven’t had to deal with it but they have a killer warranty if something did happen
@brandontaylor1551
Жыл бұрын
What brand and size lift do you have?
@aguywithajeep
Жыл бұрын
Currently has a 2.5” RC lift that came on it when we bought it. Most likely switching that out soon.
@_jeep392
Жыл бұрын
Here for the @$$ shot buddy😅
@aguywithajeep
Жыл бұрын
Views on views
@adamwagner4567
Жыл бұрын
those fresh out of the box like that or are those painted black?
@aguywithajeep
Жыл бұрын
That’s how they come out of the box. They do fade pretty quickly though so they’re getting painted soon.
@adamwagner4567
Жыл бұрын
@@aguywithajeep so word of advice get them painted before you put them on the jeep. whos inner fenders are those?
@finnyrow6579
Жыл бұрын
Will they work with stock liners or will they need some modification do you know? Great video too btw.
@jeep4bye410
Жыл бұрын
37’s?
@aguywithajeep
Жыл бұрын
39s
@Huckleberry54
Ай бұрын
Looks is a heck yea. The price is a heck no.
@aguywithajeep
Ай бұрын
They’re on the cheaper side of fenders actually. Better quality and styling than the Amazon junk.
@Huckleberry54
Ай бұрын
@@aguywithajeep I paid $100 for all my 4 fenders. They are metal and haven’t even rusted after 2 years of service. If they do, I can fix, repair and repaint them myself. I bought them from Amazon. But good luck with yours. 👍🏻
Пікірлер: 92