I have an 8 hp Ariens that is 44 yrs old and a 10 hp that is over 30 yrs old and they both work very well! Great brand, great product! I thought my 8 hp was done this year but put some fresh oil in it and it`s running like a top!
@RandyMan626
Жыл бұрын
I agree. Great brand, I have had an Ariens since 2004.
@gse244
Жыл бұрын
This is Chuck. That is great that you got it going. Good video too. Good luck!
@RandyMan626
Жыл бұрын
Thanks 👍 Thanks for your suggestions!
@paulmurphy9262
Жыл бұрын
Similar thing happened to me today, but different results. Was blowing heavy wet snow with John Deere TR27 which had to be periodically cleared. Stopped to clear chute, but the engine stopped abruptly with a loud metallic clunk. The auger still turns fine, and I can turn the motor easily by hand, no wrench needed, but then something stops it dead at a certain point. I can then turn it in the other direction until I reach a certain point, and clunk it stops solid. I'm thinking it's probably a thrown valve :(
@RandyMan626
Жыл бұрын
A metal clunk never seems to be good. Ouch
@roseymalino9855
Жыл бұрын
Intriguing but not very enlightening. Why was it seized? How low was oil level? Is pull cord now able to crank engine? What happens when augers are engaged? Did you drain oil and examine it for metal shavings, or bolts, or rod end caps?
@RandyMan626
Жыл бұрын
Thanks for the comments and questions. I am not a professional, but we are guessing the motor was seized due to low oil. Good question on the pull cord, we didn't try it again after the owner got it started with the electric start. Runs fine with the augers engaged and the owner is using it. No, I did not drain or examine the oil. Thanks again for your comments, I will try to provide more detail in my future videos.
@chrisskillen9893
Жыл бұрын
This was a good luck story... I would have pulled the spark plug while tring to free the piston.. I would have used the electric start with out the plug and added a little more oil to top of piston...Cover with lose cloth to prevent spray.. I am half way through a similar problem but using PB Blaster and let sitting for a day.
@RandyMan626
Жыл бұрын
I hope you have similar luck. Let me know if you get yours running.
@jimeckenrode1271
11 ай бұрын
another good product to try is MARVEL MYSTERY OIL it has worked for other in the past to free an engine.
@kjell-richardlvdal373
Жыл бұрын
Great work
@RandyMan626
Жыл бұрын
Thanks and thanks for watching
@stevesmith6058
9 ай бұрын
You never dreamed of oil find out where there has any shavings in it and you should never use the pipe wrench on the pulleys
@RandyMan626
9 ай бұрын
Pipe wrench probably wasn’t the best idea, but my friend is still using it today.
@cyberedwing
9 ай бұрын
I would use the pipe wrench also. So, what may te correct tool be?
Пікірлер: 18