Amazing item I will definitely consider this in the future. I like the there is no pressure switch to fumble
@Staria90
2 жыл бұрын
This helped so much with installation! Got it on in minutes!
@trooperrogue9732
Жыл бұрын
Bought my SCCY DVG-1, can't wait till the end of the week to purchase the A.L. TR10
@JCHall-uf2tz
2 жыл бұрын
I've had mine for three months and I love it! I originally had laser grips and although they are very inconspicuous, the pressure switch affected my shooting and the standby battery drain (replaced once a month if i didn't use it) along with having to take the grip apart got annoying. Question, unlike the laser grips, this has a kill switch which is great, however, how much battery drain is there in standby mode?
@Nwordscissorhands1738
Жыл бұрын
didn't fit on the g43x as advertised. scam
@deere3321
3 жыл бұрын
I have one on the way. I'm 68 and just can't see good enough to be accurate. I can focus on the target but not on either sight. Hopefully this will be the solution.
@jerryfranck7294
2 жыл бұрын
Trust me guy. Get somebody or if your eye sight good enough. Once you get sighted inn . My thought if you got the green light. Youn can see it better day and knight. Go to battery plus store they have one size like the one's that come with it but little better stronger and last longer. CR/ 1/3N comes in a 4 pack. I.put one in around when virus started still same battery still going. I even play around with it alot and still strong.They come with a plastic green on it. Cut that off because that helps for the ground. I found that when I got some. Didn't work. Took it off. Bam you have a good Lazer. Hope that works for ya.
@havfunwithit
5 жыл бұрын
I tried my armalaser for the first time at the range today. I haven’t had it that long but mine has a push button on the bottom not a sliding switch. I’m very disappointed at the results. After one magazine it stopped working. When I got home I checked the battery and it was very weak. I only installed the laser and hardly used it. When I needed it it failed. Also I can’t find my owners manual. I think on the model I have you can switch between strobe and steady on with the push button. Lots of luck using their on line manuals. The web sight sucks. Obviously since they already changed the on off button I’m stuck with a piece of junk with a battery life of 5 minutes. They also mention they have an exchange program. If you want a newer model you can upgrade at significant cost. It would have been nice if they perfected their product before they put it on the market. Now they want their customers to pay again to get something that works. I ordered 3 new battery’s from Amazon and will give it another try. They cost about 12 bucks. I’m not happy. If it happens again I’ll throw it in the garbage where it belongs.
@whateverisclever2759
4 жыл бұрын
Yea I have the push button as well and it’s very finicky.. I have to push it a couple times give or take to get the strobe then a couple to turn off then a couple more to get it back to normal and it doesn’t always work, sometimes it will go dim and I have to give it a smack to brighten up. You’d think for damn near $100 it’d be better but it’s the only one I’ve found for my sccy Cpx-4
@musicloverdgibs
3 жыл бұрын
I'll take it if you dont want it. Don't throw it away!
@donnamillermcnutt
Жыл бұрын
I purchased the TR laser for my Smith & Wesson 380 Shield EZ and I am having trouble installing it. The big side fits on perfectly but then when I put the second (smaller side) on, it does not want to fit snuggly together at the front section. I have installed the screws but it still leaves a small crack where it won't fit together properly. I'm taking it to the gun shop to see if they can make it fit better than I can.
@davebewshey1549
2 жыл бұрын
I understand the contacts being cool and all that but on a crimson Trace the button is more than intuitive you never noticed it can control it on and off anytime you want and I have never had mine fail over 6 years on the same battery... I'm not saying armalaser isnt good crimson trace is just better imho
@sethrich2790
2 жыл бұрын
Brilliantly engineered, great $, made in the USA. I LOVE mine.
@goobah1389
5 ай бұрын
They’re made here??
@sethrich2790
5 ай бұрын
@@goobah1389 I do believe so- double check it, I still love mine🎯💥
@johnaustin9051
Жыл бұрын
Just bought one for my Taurus 740 Slim. Little pricy but very pleased. Hint; spend the extra 50 bucks and buy the Green Light.
@micheleknight5451
4 жыл бұрын
I just ordered mine today for my Shield M2.0. Between comparisons with the CT and the TR series, the TR4 was the winner...hands down! The only downsides are trying to find an IWB holster and the 3 to 4 week delay in shipping. I'd love to start using this at the range!
@creole75
3 жыл бұрын
Any luck on that IWB or even better an AIWB?? The struggle is real.
@ChelBell9
3 жыл бұрын
@@creole75 Actually, I got the Crossbreed Belly band with the modular holster. They were the only ones that had it molded for the TR4.
@creole75
3 жыл бұрын
@@ChelBell9 thanks!
@whoiskota6709
2 жыл бұрын
i have a vedder light tuck holster
@Herecowbentbar
2 жыл бұрын
@@creole75 they are out there
@ianmoone5877
2 жыл бұрын
I lost the adjustment tool for my tr23 does anybody know what size that is or where I can get one
@kevinjonker7792
2 жыл бұрын
I have to say, My TR-14 attached to my Keltec P-11, was ok until I noticed one day the battery cover had come off. I was able to find the screw and battery cover but lost the battery... I took it off for a while and now will try it again...
@NothingCompares2U
8 ай бұрын
I was unaware the unit does have an on off switch, that's great. My other issue is I am wondering if a lower brightness may save battery life, but there was no option for brightness and there is no adjustment. Regardless, this looks like just what I need as opposed to the grip laser version.
@NothingCompares2U
8 ай бұрын
Needed an adjustable Quick Grip in order to install on the 1911 BB pistol in order to close the two pieces together to put the screws in, cut to fit into the Colt factory rubber grips beforehand. I like the look much better than without this, very happy with it.
@charlesanderson8793
2 жыл бұрын
Do they have one for a kel tek p32acp
@andrebaudoind
4 жыл бұрын
Just purchased one , excited its 4 my girlfreinds bersa i got her , the finger sensor sold me
@robertparker5134
3 жыл бұрын
I really really want this product... My only concern is that it will not fit my safariland 578 gls holster. I know the product (TR23) will fit my gun (Taurus G3c) but being able to holster is obviously very important. Does anyone know if this is a possibility?
@robertparker5134
3 жыл бұрын
OK so I definitely bought the TR23 & it is everything one would want in a laser and then some... After posting the above comment I ended up buying it and figured screw... I'll either like it or hate it, but I will never know if I don't Buy-&-Try! Well it take forever to ship but once it actually does, it is 2 day shipping. To be honest when I bought it I was so so so hoping it came on the earlier date (4th-10) however it arrived on the 3rd, SO A WHOLE DAY SOONER!!! So 4 days in, the only concerns that I have are very few. 1.) if buying it online through a 3rd party dealer (Amazon) it would e nice to have the option to purchase the HOLSTER WITH THE LASER a little more obvious! I say that cause I didn't even know Armalaser and the other brand used to be used with the Armalaser was a thing. 2.) Shipping could be better (shipping is done through USPS) 3.) Extra screws would be nice 4.) Better instructions on how to switch from pulse to straight beam.
@Theywaswrong
8 ай бұрын
A little puffing on the sales pitch. The button on the Crimson Trace trigger guard laser is NOT uncomfortable. That's like claiming that pesky spare tire is replaced by a better idea, a can of inflate-a-tire. And you don't have to worry about wearing a glove and "skin" contact if for some reason you are wearing a glove as some have asked. Not to say this Armalaser isn't good, just wanted to add this based on my experience between all three that I own in the Armalaser, CT and Viridian.
@jerryfranck7294
2 жыл бұрын
Love my TR23 lazer.I have lost my allen wrench that came with it if you know what size that was. I have many of them but the size I need. Please and thank you.
@Turntspazzin
2 жыл бұрын
My laser starts flashing like a strobe light but as a laser? If that makes sense, any way to fix?
@6luealreadydead
4 жыл бұрын
I just bought that same model Sccy CPX 1 and was thinking about putting a laser on it and this would be perfect for it but does anybody know around how much do these retail for?
@BXNES999
4 жыл бұрын
149.99 just bought one on amazon , but gotta wait 3 weeks for it to ship cause of this corona bs, get the green one if you order one bro
@krysfranklin4750
Жыл бұрын
@@BXNES999 sheesh there 98 on Amazon now finna get one in A couple of weeks
@therealesreviews1469
3 жыл бұрын
What's the size of the hex key? I lost mine
@infinitewonder305
2 жыл бұрын
Can you still use the lock 🔐 safety by the trigger with the laser attached?
@carlrooker
4 жыл бұрын
I need to readjust my tr10 laser, but I cannot find the hex wrench to do it. Can you tell me what size it is? Thank you.
@kutthroat7627
3 жыл бұрын
How did u re just it my laser doesn’t match were I am aiming at
@carlrooker
3 жыл бұрын
@@kutthroat7627 Underneath the laser aperture there's a hole vertical to facing the laser aperture you will see a hole on the left side of the Blazer which is used for right and left adjustment. The best bet is to have the hex wrench that came with the laser. I still haven't gotten an answer about what size wrench it is.
@zductive
2 жыл бұрын
@@carlrooker .05”
@user-rq6wi9kq1y
Ай бұрын
What type of battery does a TR take
@marcosmorantes1947
4 жыл бұрын
I am in search of a laser for a ruger p95 dc gun will there be any that will harm this model?
@GleefulJay44
5 жыл бұрын
Could this fit the kel tec p11 they look just alike
@GleefulJay44
5 жыл бұрын
???
@armalaser4097
5 жыл бұрын
Thank you for your inquiry! ArmaLaser has the ArmaLaser TR14 laser sight specifically made for the Kel-Tec P-11firearm. Link here armalaser.com/kel-tec/p-11/tr-series/1027/tr14
@joshuaheart2764
2 жыл бұрын
Whats the deal with the FDA label? Do I have to have that on to cary?
@leekogocrazy2374
Жыл бұрын
Mine as a rail n wanted to kno wat laser to get
@kushkringle9329
4 жыл бұрын
Can this laser fit on the SW40VE?
@omrynaftali
2 жыл бұрын
Will a gloved hand still activate the laser?
@aironquigley1431
3 жыл бұрын
So helpful love it
@markislostsomewhere
Жыл бұрын
My sensor is coming off... How do I replace it?
@henplay7399
3 жыл бұрын
I’m not gonna lie I have one but mine doesn’t have the switch it’s just a button and the instructions don’t help when I wanna keep it in steady mode instead of pulse mode but it’s still worth the purchase I have a sccy cpx 2 and it fit perfectly
@kendallhall868
2 жыл бұрын
Read these instructions on how to make the flashy light to steady.
@hdrider05
Жыл бұрын
Will the sensor work with a glove on ?
@BUZZKILLJRJR
2 жыл бұрын
Awesome! What kind of battery options do you have?
@muscleheadd9760
4 жыл бұрын
Is this how you install it on any gun? I have an m&p shield that requires TR 4 but do you install it the same way?
@muscleheadd9760
4 жыл бұрын
@Donivan Wilson thanks brother
@keepyourjobkeepyourjob7530
3 жыл бұрын
Can somebody tell way would u need a laser? Unless you are doing some long range shooting. If you are in a gun fight I really don't think . You are thinking is my laser on point.
@maxtexman
3 жыл бұрын
Fast target acquisition, plus when an attacker sees you have a laser sight, it might very well de-escalate a situation and send him running the other way. I don't know about you, but I never want to shoot someone unless completely necessary .
@keepyourjobkeepyourjob7530
3 жыл бұрын
@@maxtexman Im In agreement with that
@Theywaswrong
8 ай бұрын
Absent a discussion about recoil, with a laser you don't always have to bring the pistol up to acquire the target. In a tense situation you'll find that putting the red dot on the target is much easier than bringing the pistol up to eye level. You might not always be in a standing position when you need to fire or in a stationary firing position. I recommend a laser on any every day carry especially if you aren't an expert marksman, excuse men "marksperson" (geez)
@jairus6676
5 жыл бұрын
Does the sensor work when your hands are wet? I always have sweaty hands.
@BobDiaz123
4 жыл бұрын
Jairus My guess is yes, it appears to look for some skin conduction to turn on.
@whateverisclever2759
4 жыл бұрын
Yes it does work and well
@kipperwhite2976
6 жыл бұрын
Is it same for a lefthanded shooter & how EZ is it to find batteries ? very interested in one for a Sccy CPX2 TY
@armalaser4097
5 жыл бұрын
Please check our our SCCY products for the TR10 listed here armalaser.com/home/brand-products/SCCY and our batteries are sold on our website under "ACCESSORIES" listed here armalaser.com/accessories
@tehgiestone6031
3 жыл бұрын
I cant wait to get one!
@machbaby
3 жыл бұрын
Why is the green laser considerably more expensive? Thanks.
@maxtexman
3 жыл бұрын
Its much easier to see in daylight
@gjhoward
3 жыл бұрын
@@maxtexman That's not an answer.
@warman58
2 жыл бұрын
Demand is higher. Simple economics. I bought the red.
@SybrKnite
Жыл бұрын
Green lasers have more components and better laser diodes than red.
@allenmckinney9533
4 жыл бұрын
I'd like to get one for my sccy cpx2 but I just can't see paying $75+ to put a laser on a $200 gun.
@Stndariusofficial
3 жыл бұрын
I bought one for 45$ online U just gotta look
@jeffsnider7842
2 жыл бұрын
275 for a security setup? Wtf. Live a little.
@lacville987
3 жыл бұрын
Does anyone know will this fit on a LC9s?
@cristianb6442
Жыл бұрын
What do I do when I screw it in to much my screw is gone
@Theywaswrong
8 ай бұрын
Never over tighten a screw when it's fastening to plastic. Snug is all you can do. When it meets resistance, I use thumb/forefinger to snug up so I don't over tighten and strip out the plastic threads. Your only remedy now is to check with the manufacturer about buying a replacement case and transfer the internal parts.
@63cero
2 жыл бұрын
My only concern is a holster
@warman58
2 жыл бұрын
Most kydex holsters can be heated with a hair dryer or heat gun and then be refitted to your particular gun and accessories.
@mikesmods317
5 жыл бұрын
At what range is the laser set to from the factory?
@havfunwithit
5 жыл бұрын
mikesneed31 you have to sight it in
@tomowens1974
5 жыл бұрын
Where can you buy this laser sight besides online do any stores carry it?
@armalaser4097
5 жыл бұрын
Please check out our Official ArmaLaser Dealers on our website listed here armalaser.com/dealers/find-dealer or at one of our list of Gun Shows here armalaser.com/gun-shows
@marcodiehl4384
3 жыл бұрын
What type battery
@314BigDawg
4 жыл бұрын
Does it come with all the tools to install?
@kevinsweden9209
3 жыл бұрын
yes
@RPN_Ent.
8 ай бұрын
Mine don’t fit
@jimmywilljam
4 жыл бұрын
Will this work on a sccy cxp-4 ???
@jamesfang9342
4 жыл бұрын
Yes the TR10 fits that model its what my wife carries!
@elbowdeep2472
4 жыл бұрын
What size alien wrench do u use to take the thing off.
@edselhegmon133
3 жыл бұрын
They put the tools with the laser
@kendallhall868
2 жыл бұрын
Very small
@CCBABY510
2 жыл бұрын
Battery drainer
@Theywaswrong
8 ай бұрын
Why they chose to use a SCCY for demonstration is strange. NO it wont' fit your S&W, any Springfield, Taurus, Glock, etc. It's just a demonstration of the TR line. Questions on any laser that begin "does it fit" are clearly need to do some internet shopping or research. I've seen resellers confuse the situation when selling a laser on Ebay or FB and saying "fits any pistol". That would mean all pistols have a rail or don't have a rail, all pistols have the EXACT same trigger guard shape and all pistols are the game caliber. Google what laser fits your pistol, they're for the most part ALL different. For instance, a laser listed for a S&W Shield WILL NOT FIT the S&W Shield Plus. A laser for one Springfield most all the time will not fit a different model. Even the trigger guard on a 1911 will vary in shape between manufacturers and even within a brands models. This goes for any brand of laser, not just Armalaser.
@terrancegraham3758
4 жыл бұрын
My laser died what batteries do I need ?
@gjhoward
3 жыл бұрын
What battery did it have before it died?
@GarySmith-up1un
7 жыл бұрын
Old revolvers ?
@armalaser4097
6 жыл бұрын
Unfortunately, ArmaLaser does not have any ArmaLaser laser sights for revolvers at this time.
@armalaser4097
6 жыл бұрын
Proteus Hellene the gold touch activation strips are activated by any human skin. Therefore which ever finger is on the grip and resting underneath the trigger guard, that finger will activate the laser sight. It does not matter which finger you use to activate.
@namechange94
5 жыл бұрын
all i wanted was freaking sharks with freaking lazer beams attached to their head !!! 😝😝😝
@edselhegmon133
3 жыл бұрын
It's a piece of crap. After a few uses. The laser doesn't work anymore.
@James-Ram
2 жыл бұрын
It's JUNK!
@eric44ism
3 жыл бұрын
Why in the hell does the package say it fits on the beretta 92fs? that straight up false advertisement. The trigger guard is too thick.
@Herecowbentbar
2 жыл бұрын
They make different versions
@trumpfan7139
Жыл бұрын
Remove ammunition and magazines away from the gun because they might magically load themselves in the gun. That's lawyers saying they don't know squat about guns and that we don't know anything either.
Пікірлер: 114