I’ve seen a ton of videos on the Gorgon the last few weeks. But this was by far the best, most informative, one I’ve seen. I love mine. I got the green and yellow one shortly after they hit my LHS. Just upgraded the battery to 2s Lipo. And added a cooling fan because I’m OCD 🤷🏻♂️😂 Other than that it’s still box stock right down to the factory brushed motor. This thing takes me back to the 80’s when I had my Tamiya monster beetle. Not every RC has to go 50mph to be a ton of fun!
@rcilluminati26
10 ай бұрын
Awesome, thanks! It’s really a great RC, stock or modified. A basic 2wd monster truck is still one of the most fun trucks.
@BeforeRobots-ch7gl
9 ай бұрын
what and where did you get the cooling fan?
@user-hg9sj9wz5v
9 ай бұрын
@@BeforeRobots-ch7gl I got the cooling fan from my local hobbytown. The one I purchased was made by “yeah racing”. Only because they didn’t have an Arrma 40mm cooling fan. But any 40mm fan should work.
@EKB_RC
8 ай бұрын
Love the Gorgon my 3 year old drives it pretty well
@shuster1921
10 ай бұрын
Great Review Brother! This is definitely a throw it in the backseat, take everywhere RC Truck! I ordered the same version, for basically the same reason you did,, lol
@maxtap1
2 ай бұрын
great video. i finally ordered mine just now. could you list all of your upgrades so i could make a similar build.
@feutastisch
10 ай бұрын
Great video! Loving my GORGON 🤩 as you said, the handling is epic and it’s awesome to wheelie with it
@jimbo4203
10 ай бұрын
I still play with my Arrma Granite Voltage , its cheap , durable fun ! Im getting a Gorgon or Grom 😊
@rcilluminati26
10 ай бұрын
Cool, I def recommend the Gorgon. Great bang for the buck
@RcPlayer-tt2vw
10 ай бұрын
Agree with everything you said to the tee , been saying the same things to anyone who listen😂 I look at my rc collection and think was this worthwhile. Even stock I think I get just as fast back yard track times , and rainymuddy. Days alot easier using 200 rc than 1000 rc , the granite used to be cheaper go to
@rcilluminati26
10 ай бұрын
It really seems that my favorite RCs happen to be the less expensive ones. Lower expectations I guess.
@williamperri3437
8 ай бұрын
My Team Associated Reflex B with a tire change has been one of my favorite rigs since 2019 and I have Arrma, Losi, Tekno, Serpent, Kyosho and Mugen. With a few upgrades it was like 240.00.
@RcPlayer-tt2vw
8 ай бұрын
@@williamperri3437 me too but I have the truggy , funny how it’s not exactly quality diffs ect but still performs like a kit compared to other minis .i changed radio esc to hw 3s , slightly longer can motor and the little fan comes free on arrma 3s . I tried to tune the diffs but they are not really sealed
@RcPlayer-tt2vw
8 ай бұрын
@@williamperri3437 now it’s a possibility I buy the b reflex today instead of the baby granite lol
@jalee6587
10 ай бұрын
It comes with a 13t pinion
@TheScappa10
4 ай бұрын
any chance you can create a list of all the parts used on this? I'm new to the hobby and i'd like to upgrade to 3s. great video!
@rcilluminati26
4 ай бұрын
Thsnks, I’ll try to list it all in the description soon.
@johnjay7961
10 ай бұрын
Very fun rc the Gorgan is. Even bone stock handles well for rwd. Jumps well and does like 26mph on 2s battery. Very light rc best looking rc for the value for sure. Only gripe is the thin body and the battery tray is a bit cramped and hard to place the battery and connector in.
@rcilluminati26
10 ай бұрын
I feed the battery lead up through the chassis which gives it more room in the tray. Def need to reinforce the body
@gregoire220
4 ай бұрын
would you mind posting a link to all the parts you needed for the brushless upgrade? (esc, fan, motor, anything else). I'm new to RC and my son and I have burned up FOUR brushed motors on the gorgon since we changed from the stock NiMH batteries to 2S LiPo's. We didn't realize heat build-up was an issue on the first one. But the other 3 - we've been trying to be careful. The last 2 haven't even made it 1 battery pack even with shutting down the car every few mins to let it cool down (and adding a fan above the motor). I don't know if we're doing something wrong - or if the stock brushed motors just can't handle LiPo's? Or we got the incorrect LiPo's? (They're 2s - and the specs match everything on Horizon Hobby's website for the Gorgon - except they're "80C" instead of "50 C"). Would setting gear mesh a touch too tight possibly lead to burning up a brushed motor? Other than adding LiPo's - and having to reset gear mesh after installing new stock brushed motors - we haven't really messed with anything. We bought stock motors from the local Hobby Shop - not amazon junk. (2) different gorgons - burned up (2) motors each. I can't help but wonder if it's just the design of the motor cavity not letting enough airflow in there? If anyone has any ideas on what we may be doing wrong - please advise. We're newbies. The last run was very conservative with run / shut down times and we STILL burned up the brushed motor in less than 1 battery pack. Thanks in advance!
@Kdash66
9 ай бұрын
Im a newb but im having so much fun with its stock form.
@rcilluminati26
9 ай бұрын
Nothing wrong with stock. To be honest, I’ve made a lot of RCs drive worse by doing mods. Lol.
@paulmaldonado7039
6 ай бұрын
I'm the same way,stock is just fine but I do go 2slipo and that's plenty of speed 🤪 Vegas Paul out.
@rcilluminati26
10 ай бұрын
Nice! You’re gonna love it.
@paulmaldonado7039
6 ай бұрын
Dude, I tried to go brushless motor and ESC combo for my voltage truck and messed up with the servo.i want to try that but not sure about it 😮. Vegas Paul here.
@V8chump
5 ай бұрын
Hmmm unless your BEC was set too high it shouldn’t effect the servo at all… and if it was set too high the receiver should be dead too 🤔
@RcPlayer-tt2vw
10 ай бұрын
I do I same method for the bodies except I just used e 6000 in corners , I’m going try thin coat before the gorilla tape on this guy
@rcilluminati26
10 ай бұрын
Yup, e6000 and Gorilla tape has been holding up great.
@kerribooth7962
10 ай бұрын
Lol I think they have targeted the 80s kids with grasshopper 2 and lunch box now we are all going out to get one of these and putting all the power you want in it to re create are childhood good job arrma what's next
@rcilluminati26
10 ай бұрын
Haha! Good point!
@amavarrc
10 ай бұрын
I just subbed to your channel! Nice video. Question for you. I’m likely going to buy this for my 5 year old daughter. I let her use my Senton 3S BLX on 50% power. However, while she’s getting better at running it she still struggles a bit. If I get her this Gorgon and eventually want to upgrade to 3S BLX components will they fit in this truck? I have extra electronics laying around and I think it would be fun for her once she gets a little better operating it as a brushed version. Thank you for your help.
@rcilluminati26
10 ай бұрын
Yes, great idea! Perfect truck for her. I believe they should fit. The only issue I’ve seen is the wire location on certain motors interfere with the chassis opening. It looks like the Spektrum system will be fine. You will likely need motor wire extensions to reach the esc. Easy to find on Amazon or at local shop.
@amavarrc
10 ай бұрын
@@rcilluminati26 Thank you for your response and your time. I will get one for her! The truck seems very durable. I guess for now I could buy an IC3 to EC5 adapter since I already have 2S lipo batteries with EC5 connectors? Is that correct? Or is there a better way to go regarding the battery connectors?
@rcilluminati26
10 ай бұрын
Yes, you can buy an adapter
@amavarrc
10 ай бұрын
@@rcilluminati26 That’s awesome. Thank you
@williamperri3437
9 ай бұрын
Looks like you added some shock spacers etc to the front shocks.
@rcilluminati26
9 ай бұрын
Yes. Preload spacers. It’s sprung very soft. I’m planning on redoing the shocks with heavier fluid soon. I’ll post a vid on the results.
@williamperri3437
9 ай бұрын
@@rcilluminati26 yeah, I’m surprised how well it handles, but I feel like it definitely needs thicker fluid and/or a stiffer spring. It’s awesome otherwise.
@woutervanwijk4369
8 ай бұрын
I meant why not every versions with optional battery and charger? Why can't you choose another colour if you don't need those?
@rcilluminati26
8 ай бұрын
Ahhh, yes. That would be nice. Batteries and chargers should always be add ons. Overall, I prefer a kit to build myself
@woutervanwijk4369
8 ай бұрын
@@rcilluminati26me too. But especially with the kit version people tend to already have batteries and chargers. Jus ain't logic 🤣🤣🤣
@sameold77
10 ай бұрын
Did you have any issue with your build? I just finished mine and the gears grind when under any kind of little pressure. Even just turning the gears by hand without the motor out it sounds like the gears clicking as if they are not meshing properly however there is no adjustment. All you have to do is drop the rear gear and driveshafts in so IDK what the deal is but pretty upset about it.
@rcilluminati26
9 ай бұрын
I had no issues. I will say, it was tough to align a few things that mount up the chassis. With it being split down the middle, I had to really squeeze it together to get things seated flush. I’m guessing this is your issue. Something by the trans isn’t seated fully.
@anthonythompson12
8 ай бұрын
Its the screws under the bulkheads, rear that'll do that. Have to get things flush and tight down there...@@rcilluminati26
@woutervanwijk4369
8 ай бұрын
I still don't get why Arrma didn't give you the option to buy every version without battery and charger, especially the rtb. It's such a waste of batteries.
@rcilluminati26
8 ай бұрын
There is one version with no batt and charger but it seems to never be in stock. I think it’s the blue one.
@owen8538
5 ай бұрын
Does anyone know any esc 3s no limit on 3s
@owen8538
5 ай бұрын
Does anyone use it on14t brushed 3s
@rcilluminati26
5 ай бұрын
Ive since gone up a few teeth, it can handle more speed
@owen8538
5 ай бұрын
@rcilluminati26 I mean does anyone run it brushed on 3s if so what esc are you using please an has it been reliable
@V8chump
5 ай бұрын
@@owen8538no, nobody is running brushed 3s. 3s is generally only used in brushless setups. The stock setup can’t take 3s and I doubt the motor would like it
@owen8538
5 ай бұрын
@V8chump I am what you on about I got 3s brushed motor an 4s brushed esc these lovely 2 keep old school I run 9cell nimh .I got other brushless 2 -3 s tho I like these brushed its gr8
@steelman134
5 ай бұрын
The worst part of Arrma Gorgon is the Spektrum Servo s660, is a complete piece of sh!t... I have 3 Gorgons, for me and my kids, all the servos die after 6 batterie charges.
@rcilluminati26
4 ай бұрын
100% they fail on every truck. I like the Zoskay 35kg servo off Amazon. I use them in a lot of my trucks.
@SilverbackOrdnance
10 ай бұрын
Which motor because the 3650 doesn’t fit
@rcilluminati26
10 ай бұрын
I’m using a 3660 and it fits great. Is it the wiring clearance you’re having an issue with?
@marshallkeves5145
10 ай бұрын
Where did you get the wheelie bar
@rcilluminati26
10 ай бұрын
Amazon. It’s the wheelie bar for the Arrma Big Rock ARA320613. I recommend using longer screws on the lower mounts and if jumping high, maybe even take it off.
@williamperri3437
8 ай бұрын
Hey, what 6500 MAH battery did you use?
@rcilluminati26
8 ай бұрын
I’ve been using CNHL lately and they’ve been really good. Great pricing too. It’s actually a 6200 3S hard case.
@williamperri3437
8 ай бұрын
@@rcilluminati26 wow! Sounds good. I have never heard of that company. I’ve been using Zee for the past few years just because they seem better than power hobby.
@rcilluminati26
8 ай бұрын
@@williamperri3437 Zeee are good as well. CNHL has great sales. Amazon has them or you can check out their site.
Пікірлер: 63