Hi guys,
There are two ways to run a drag body on the Arrma 1/8 road bashers, you can use wideners on the back or convert to Senton rear arms. Parts needed are Senton rear arms, drive shafts and two approx 20mm M3 screws for the sway bar mounts. Stock links work but there is only about 5 threads of bite so if that bothers you, a set of longer turnbuckles is needed. You will also need two additional tall body posts (possibly DIY depending on the body you choose). Total cost of parts is about $30-50cdn depending on how many parts you buy/change. You will need to mod the arms by cutting off some excess material to make a spot to mount the shocks and drill holes for the shocks and sway bar mounts. It's not super tough and the Pro-Line Cuda body looks pretty good IMO. The Losi Ford Drag car body also looks great. Feel free to disagree.
Do you drive to wrench or do you wrench to drive?
Негізгі бет Автокөліктер мен көлік құралдары Arrma Vendetta or 1/8 Infraction Drag Body Conversion
Пікірлер