It is June 16. I am putting my own together as I watched this video. I had a house fire and lost all five of my printers this is a replacement to those . it was so easy to put together just ready to power up and start. Glad to see others are still rocking this unit. Can't wait to print my first big helmet with it.
@AntVaq-h3f
2 ай бұрын
How’s the printer going?
@evannielsen9013
2 ай бұрын
@@AntVaq-h3f Thanks for asking. Things are going well. I am having a small moisture issue with the filament.I have the printer out in my shed .So I just bought a filament dehydrator. Just got it yesterday. Have my first roll in it. It is raining here in Rhode I stand so I won't be printing today. ...I did get a man do he Met out of it ,now the prep work and sanding and painting.
@GBWM_CNC
5 ай бұрын
This is going to be an usefull tool in my workshop! Don't forget to check out for more usefull tools 👉 www.tomtop.com/p-rtoyt-swx3pl-eu.html?aid=GBW Thanks for watching!
@isacsanchez4107
14 күн бұрын
Hello, I hope everything is going well, I would like to know how it is going with the printer, I am thinking about buying the same one, and I would like to know if you had any problems with the hardware. I saw that many had a symmetry problem with the z axes, or I don't know what the case would be. Please can you help me. Blessings
@mr.ranyhomemade2466
5 ай бұрын
You knew electronic how to go and work love to see of your work😊
@GBWM_CNC
5 ай бұрын
😁
@santiagogaray2568
2 ай бұрын
Aguante el mate!! Saludos desde argentina
@GBWM_CNC
Ай бұрын
¡Me encanta el mate argentino! :)
@adrianutratny8361
4 ай бұрын
Czekam z niecierpliwością na tą tokarke cnc 😢 prosił bym o dokładne pokazanie podłączenia silnikow krokowych i jak będzie to podpięcie silnika 3fazowego przez falownik do plyty cnc
@GBWM_CNC
4 ай бұрын
Aktualnie walczę z sposobem obróbki ramy tokarki, a oprócz tego mam jeszcze kilka innych projektów w toku, które muszę dokończyć by móc się zająć już na całego tokarką. Prywatnie też nie mam za dużo ostatnio czasu, ale za jakiś czas wszystko się powinno uspokoić i wtedy będę mógł pełną moc przekazać na projekt tokarki :) Robię co mogę ;) A co do podłączenia silników krokowych - to już są takie filmy na moim kanale, a w przypadku tokarki będą to serwa zamiast krokowych. Co do falownika - też już takie filmy były a tutaj też planuję serwo na wrzeciono :) Pozdro!
@TrPrecisionMachining
5 ай бұрын
guud video my friend
@GBWM_CNC
4 ай бұрын
Thank you Michel!
@sergiucioanca8763
5 ай бұрын
Super
@QwertyuiopQwertyuiop-hb9hx
5 ай бұрын
Polak potrafi ;)
@GBWM_CNC
5 ай бұрын
zawsze! :)
@zakspop
4 ай бұрын
Oh, I hated seeing you put glue on that PEI sheet. They don't need glue. They hold fine when hot. Let them cool down and peel them up and the parts pop off.
@GBWM_CNC
4 ай бұрын
Without glue im not able to get it to stick properly. I was trying different setting and sometimes it was holding and sometimes it just bent away from the bed. About the part poping off - you're right. This is my first 3d printer so im learning :)
@zakspop
4 ай бұрын
@@GBWM_CNC What temp do you have your bed set to? I have mine at 60c. Sticks great.
@GBWM_CNC
4 ай бұрын
@@zakspop same, 60
@ricky3489
2 күн бұрын
Yes they do, if you suggest otherwise, you dont print enough.
@zakspop
2 күн бұрын
@@ricky3489 I've only needed glue when printing ASA. PLA never needs glue.
Пікірлер: 22