My nine year old grandson and I thank you for giving us a DIY flier that he can fly. Thank you for sharing your skills as an RC pilot and developer.
@LostWax2
4 ай бұрын
My pleasure!
@Colin_Holloway
5 ай бұрын
An old-timer at the RC field many years ago taught me that as soon as you go inverted (or launch inverted like you did) put your thumb behind the stick so you can only push and never pull the elevator stick. Of course this only works with Mode 1, and is one of the many benefits of Mode 1 for aerobatic flying. Separating the elevator and aileron sticks allows much more precise control over Mode 2.
@LostWax2
5 ай бұрын
That's a fantastic little trick! Thanks for sharing!
@Colin_Holloway
5 ай бұрын
@@LostWax2 I forgot to mention this is another good reason to use thumbs and not pinch the sticks!
@marc5297
3 ай бұрын
When flying inverted always remember "Down is up and up is expensive"🙃
@ruthbryant3929
11 ай бұрын
Always fun to see what you have created, and you can have family fun time! Thank you.
@LostWax2
11 ай бұрын
Thanks for watching!
@kenrobba5831
3 ай бұрын
Very simple =. great ENGINEERING. +. MINIMAL execution =. Genius =. Great flying machine !!! ThankX !
@LostWax2
3 ай бұрын
Thanks so much!!
@IsaacKuo
19 күн бұрын
If there's wind, maybe you could poke a paperclip through the underside to attach a kite string.
@kimberlyking3083
11 ай бұрын
This looks like stop much fun to make and to fly. My husband really enjoyed watching how you built this.
@LostWax2
11 ай бұрын
It really was a lot of fun, thanks for watching!
@Z0MB13Redfield
11 ай бұрын
Perfect timing with this video, I'm heading out to my local dollar store for foam board. I'm making my son a shield for his link costume.
@LostWax2
11 ай бұрын
Nice.
@chiparooo
Ай бұрын
Glad to see another video! Always enjoy them. Great little project, fun, well documented. Thanks for sharing!
@SeareanMoon
11 ай бұрын
those look so fun! definitely something to try next summer! Wow though, your son is growing up so much! and your daughters laugh is magic!
@LostWax2
11 ай бұрын
Yep, those kiddos just keep growing! And that was two years ago😁
@athipallimallikarjunareddy9930
6 ай бұрын
the perfect rc flight on air ive ever seeennnnnnn like dude its soo smooth
@LostWax2
5 ай бұрын
Thanks!
@supaoranges1086
5 ай бұрын
That was a nice shot of you and your son flying in formation!
@LostWax2
5 ай бұрын
Hehe, I never realized how hard it is to get two rc planes close to each other:)
@philipajones9910
Ай бұрын
Thanks for posting, this is my next build
@HoNau77
6 ай бұрын
Nice built and nice flying. Back then 25 years ago we printed the plans mirrored (or rather copied them with the copier) and then ironed them onto balsa wood with an iron. I don't know if this works with paper foam boards also. But might be worth a try.
@owengrossman1414
3 ай бұрын
I was taught a trick years ago about flying inverted. You imagine that your stick is extended down through the bottom of the transmitter.
@potatopotato2957
3 ай бұрын
hey, where abouts is the cg for this plane?
@carl469
7 ай бұрын
Where is the CG???
@Green_Tube
13 күн бұрын
It should usually be 33% from the front of the wing to the back.
@deannamiller
11 ай бұрын
You make the best videos!
@LostWax2
11 ай бұрын
Wow, thanks!
@Cartoon_Central_496
7 ай бұрын
Centre of gravity is not mention in video
@JacobHGamez
11 ай бұрын
Awesome
@LostWax2
11 ай бұрын
Thank you!
@JacobHGamez
11 ай бұрын
@@LostWax2 your welcome, I love the videos!
@cool_and_funny9702
8 ай бұрын
Thank for the tutorial 🎉
@LostWax2
8 ай бұрын
You're welcome!
@user-db6it3iw3m
5 ай бұрын
Just watch out guys for the density of the foam board cause it has a big impact on the weight of the plane. I used by accident high density foam board and it added 60 grams to the rc plane😬
@rolandblais
11 ай бұрын
This is a Rad new project!
@LostWax2
11 ай бұрын
Yep, super fun!
@macbenac777
10 ай бұрын
good job.
@JamesAnderson-nn9df
4 ай бұрын
Thanks for that Lost Wax! Really excellent video and witty dialogue! Instructional too! If you get a minute, can you tell us what mini camcorder you were using?
@LostWax2
4 ай бұрын
Sure thing, the camera I had mounted on the plane was a Firefly 2. I did need to make the plane lighter to keep it all under 250g though.
@JamesAnderson-nn9df
4 ай бұрын
@@LostWax2 Thank you for the prompt reply!
@Jimgoodwin846
8 ай бұрын
Thanks for the video! Excellent build video…I’ve become interested in sub 250 g planes to build. Thanks.
@KamranHaciyev-wy7ky
2 ай бұрын
Thank you bro now i can make it easier❤❤
@LostWax2
2 ай бұрын
You're welcome!
@davidNH
5 ай бұрын
Hi. Just seeing this video now. Awesome sub 250 plane. To make sure I printed the plans correctly. Can you tell me what the expected wing span is for this bird
@Coryskool
2 ай бұрын
where should the cg be at?
@gregknipp2575
2 ай бұрын
Could you please advise where the CG is please. Thank you.
@LostWax2
2 ай бұрын
I honestly don't really know, I don't have one set up at the moment, and I never really measured. My guess is somewhere around 1/3 back from the front of the wing.... ish... I just move the battery around until I like how it flies.
@Rudy32225
10 ай бұрын
Nice build. Is that a pusher or standard pull motor-prop configuration? Thanks for sharing.
@LostWax2
10 ай бұрын
It's set up as a pusher.
@thegunkster.
4 ай бұрын
Any chance that you could post a tutorial on how to add ailerons? also would a 1400 kv motor be enough to power this?
@LostWax2
4 ай бұрын
Hmmm, I have added ailerons to one of them since then but I have yet to fly it! What I did was add a single servo in the centre of the fuselage that controlled both ailerons. But again, I haven't tried it to see if it works in the air:)
@Thfeyhvfdetyhbvcd
Ай бұрын
I wonder what the weight difference would be using FOAM-TAC instead of hot glue?
@zeeawad9950
2 ай бұрын
What channel should i put the servos on
@fanzfanzilla
4 ай бұрын
Thank you for the video. I am completely newbie to rc plane world. A lot of tiny details to follow. I am hoping to build a foam airplane that you showed in your video. I want to use your scaled up plans. Did you make them available for download? I did not see the link in the description. Thank you for sharing.
@thegunkster.
4 ай бұрын
it’s on his gum road page, it’s his website
@mgrabisch
2 ай бұрын
Can you share links to where you purchased the rc components? Thank you for sharing this video!
@LostWax2
2 ай бұрын
Yep, they're in the description
@mgrabisch
2 ай бұрын
Sorry, how about for the servo push rods? Nevermind. Found something on Amazon.
@mgrabisch
2 ай бұрын
@@LostWax2And thank you for the quick response!
@ranki55
3 ай бұрын
how did you get the scaled up one
@mikem1959
7 күн бұрын
I do not see the pattern on the web page. IS it not available anymore or is it behind a paywall or subscription?
@LostWax2
7 күн бұрын
Yep, it's still there, just keep scrolling to the very bottom of my pattern page until you get to the free stuff.
@Simladdy
2 ай бұрын
hey mate its my fist time making a plane and i love your design but i wish you could share your design so i can print it out A4 and just build it please take this into consideration
@Simladdy
2 ай бұрын
nvm just bought your template thank youuuuu im just a lil dumb
@LostWax2
2 ай бұрын
@@Simladdy Hehe, no worries, glad you found it!!
@Sandokans
9 ай бұрын
Hello sir. I want to download your plans modified with the airfoil shape on the wings. How I can do?! Thanks
@SharkThunder12
2 ай бұрын
How much did you size it up? (I want to build one)
@LostWax2
2 ай бұрын
I don't remember exactly, but you can download a printable PDF of the scaled up version I made here: lostwaxoz.gumroad.com/l/f16
@DSC2020
Ай бұрын
Pode me enviar a planta ?
@user-db6it3iw3m
5 ай бұрын
Can you tell me what onboard camera did you use and its weight, cause my f-16 is a bit to heavy so I need to put the lightest camera possible.
@LostWax2
5 ай бұрын
O.K., so I used a Firefly 2 camera, and it, with the 3d printed mount I made, weighs 38g. However, on the plane I mounted it on, I built lighter than the one shown on the video- I used as little hot glue as possible, I used lighter 5g servos and a tiny little receiver. It all just squeaked under 250g by a gram or two.
@user-db6it3iw3m
5 ай бұрын
Ok, does the camera work by itself or do you need extra components?
@LostWax2
5 ай бұрын
@@user-db6it3iw3m The camera is standalone. it has no wifi or anything, so you just press record and then start flying. There's no way to see your footage until you get to a computer and download it.
@user-db6it3iw3m
5 ай бұрын
Ok, thanks a LOT!👍
@72-atharvkarale88
6 ай бұрын
Please provide us A4 size pdf of this rc plane
@DSC2020
Ай бұрын
Olá como baixa em PDF A4
@Knatterkiste1000
5 ай бұрын
👽👍
@macbenac777
10 ай бұрын
do you have stl print? I have order your plans, thank you.
@LostWax2
10 ай бұрын
Hi there, just wondering which stl you are looking for? The motor mount?
@Sedxgwarthunder
5 ай бұрын
can you make a link for 3d printed parts?
@LostWax2
5 ай бұрын
I'll have a look and see if I can find them....
@LostWax2
5 ай бұрын
Okay I just quickly published the motor mount on Thingiverse. Here's the link: 3d printable motor mount: www.thingiverse.com/thing:6535972
@Sedxgwarthunder
5 ай бұрын
thanks! @@LostWax2
@Learjetsaviation
6 ай бұрын
Whyyy do I need to pay for the plans it is my only obstacle i can t build it😢
@LostWax2
6 ай бұрын
The plans are free, you don’t need to pay for them. Just type “0” in the price box and you’re good to go.
@user-db6it3iw3m
5 ай бұрын
Hello, I am sorry for the bad comment I made; when I read on your site about your son’s past condition, I understood why… keep on the good work.
Пікірлер: 93