Could listen to you all day, Mr Moss! You are full of knowledge to a new rider like me!
@GreenMntMoto
3 жыл бұрын
I’m digging this guy - wish he was my neighbor
@nikhilarolla7643
9 ай бұрын
I wanna play with his duck too
@DEADmetal3
6 жыл бұрын
Great video as always. I've looked through quite a few motorcycle technical advice and tuning channels but Dave Moss Tuning and SportbikeWrench (his old channel) are the best ones for me. It's not only that there is a lot of attention to providing correct and useful information, but i find it somehow pleasant to watch Dave share his knowledge. Installing his app now.
@catalystreactionsbw
6 жыл бұрын
Thanks for being willing to invest in yourself and I appreciate your comments about video content as I try to inspire as well as teach. I also appreciate you looking at the App!
@aldo5658
Жыл бұрын
Thanks, I just found his channel and glad to see his older videos now
@robertpanes
4 жыл бұрын
I like Dave Moss and I've only just met him! What a font of knowledge.
@kylegilmore3810
6 жыл бұрын
Full sized palms and shorter than average fingers suck. Especially with gloves. Palms either too tight or there's slop at the finger tips. Thanks for the video Dave
@tonykeast9966
6 жыл бұрын
20 years I've been riding. Into bikes for 25 since I was 12. Rode for a decade without ever adjusting anything. Rode the next decade with better control and more comfort with less fatigue... just watched this, in my garage next to my R1... tried this... Dave Moss you are a genius. I think I've been 2 clicks too far out for 9 years with this bike! I'll need to check on a ride and with gloves on just to make sure... Mayne my hands shrunk!? Or maybe a buddy with bigger hands messed with it when admiring Pazzo's lovely adjustment. I hate that lol
@catalystreactionsbw
6 жыл бұрын
Report back with your findings please so others can see how you benefited from testing :)
@tonykeast9966
6 жыл бұрын
Dave Moss Tuning jobs a good 'un! Works a treat. No longer an overstreach, although I wasn't previously aware I was overstreaching... I have a problem with my hands, called dupytrens contracture. The tendons are too short on my little and ring fingers. Closing them to about 90 degrees. It's painful and a distraction after a little while, so less effort using my gnarly old paws... the better! Anyone with carpal wrist or digit issues/old injuries should use a bit of savvy when laying out their simple hand controls. I found by moving levers further up the clip on it gave me more space for gripping with my outside 2 fingers. Shorty levers with a more severe angle made it all work. It really is the simple things innit!? If it keeps dme riding happier and a bit longer then that is the best possible result! Cheers Dave.
@shakibahmed9777
4 жыл бұрын
Thanks man love from Bangladesh 🇧🇩
@DieselMI
3 жыл бұрын
I have small hands and the de the clutch only way i can use the clutch is creating a 1cm space on the leaver… ☹️ does this cause any problem to my bike, is the any other way of resolving this problem?
@catalystreactionsbw
3 жыл бұрын
As long as the bike does not creep when you put it in gear there is not a problem
@DieselMI
3 жыл бұрын
@@catalystreactionsbw thank you! 🙏
@Its4RealNotAPhase
4 жыл бұрын
Does that mean that in case of an emergency brake you jam the lever onto your knuckles? Is it even possible to perform a optimal brake distance with only two fingers and the lever jamming into your knuckles?
@catalystreactionsbw
4 жыл бұрын
100% yes. A big factor is changing brake fluid regularly as well.
@Bikeadelic
4 жыл бұрын
Would be really handy if you could list ten good brands that make aftermarket controls. Ie rear sets, levers, bars, seats, etc
@catalystreactionsbw
4 жыл бұрын
Great idea! We will make sure that gets created.
@Bikeadelic
4 жыл бұрын
Dave Moss Tuning I’m excited for that! I’ve spent far too long looking over paused youtube videos screen shooting and zooming in to try and make out what it says on their track bike rear sets or levers only to find that the brand is well out of my price range.
@hugolikejuice
Жыл бұрын
Is the video still in the works about the good lever brands?
@gregpearce
6 жыл бұрын
Who are the two knuckleheads that gave this video a "thumbs down"? Seriously???
@catalystreactionsbw
6 жыл бұрын
If this is a Yin video they must have been the Yang twins (oops, triplets)
@gregpearce
6 жыл бұрын
Dave Moss Tuning, indeed.
@blknoel
6 жыл бұрын
Probably those who got their levers set up wrong but too stubborn to admit...
@ryangoesfast1979
6 жыл бұрын
Greg Pearce there's always one...or two
@mannyfel8324
5 жыл бұрын
When you’re the best there’s always haters.. Dave the top dog.. so his haters thumb down things lol but hey at least they’re giving you Views Dave
@garyramsdale9340
6 жыл бұрын
Very detailed. Thanks
@glackandbold7270
3 жыл бұрын
300k miles later, I'm still weird: 4 fingers on the clutch and 2 on the brake.
@catalystreactionsbw
3 жыл бұрын
Sir, with all due respect your are unique and therefore quite normal! We all do things our way.
@alexandergenna3048
5 ай бұрын
I do four on both lol. I ride in traffic/commute a lot so it makes it easier on my forearms.
@fuglbird
3 ай бұрын
Warning: Dave Moss doesn't play the piano. He uses the four finger numbering system and refers to his index finger as his first finger - just like a guitarist. Road riders normally use the five finger numbering system because the left thumb normally controls the indicators and the horn.
@beholderlt
5 жыл бұрын
here's another topic - wheel balancing - how necessary is it?
@catalystreactionsbw
5 жыл бұрын
I've had a wheel weight fall off and the vibration was astounding! I prefer to balance the wheel and epoxy the weight to it which minimizes the impact of a lost wheel weight externally.
@catalystreactionsbw
5 жыл бұрын
Williams replying here. Poetically, the need is directly proportional to the speed. I know a top shelf tire guy, works MotoAmerica events, sells every brand of race tire, who said with todays wheels and tires, only national level racers, which Dave Moss is, can tell the difference. But we should test it anyway.
@beholderlt
5 жыл бұрын
My guess is depends on how bad out of whack the rim is. I always balance my street tires but my front wheel always needs a lot of weight and the rear needs barely if any.
@762851
3 жыл бұрын
is this ergonomic relevant to cruisers?
@catalystreactionsbw
3 жыл бұрын
100% yes, as is getting the right fork oil to stop the notorious "cupping" cruiser get from the oil being too thin.
@jj.1412
3 жыл бұрын
Do tell. I assume you mean the tires? Look forward to your reply.
@keaponlaffin6737
4 жыл бұрын
Mind. Blown.
@AmmarKhan-g1f
6 жыл бұрын
How to know that you need to replace your clutch plates i used to do lots of clutch wheelies and just replaced the clutch wire because it broke what are the signs
@catalystreactionsbw
6 жыл бұрын
Engine speed will increase but actual speed will not, or engine note changes quickly under hard acceleration with loss of momentum.
@hornet224
3 жыл бұрын
He flipped us the bird at 1:04.
@ravenshield56
4 жыл бұрын
I took my standard legnth stock levers off my MT09- to add some shorty MZS levers- worst decision of my life. No feel in the front brake at all now, absolute shite idea.
Пікірлер: 49