This was so much better than reading the manual. GREAT info. I learned a lot and you prevented me from making several mistakes from lack of knowledge. Starting and tensioning the chain were very key.
@Lolmaro.
Жыл бұрын
Thanks for this video, just got a 20 inch as a gift, this is my first chainsaw, can't wait to clear my land with fallen trees!
@MACE_HINDU
7 ай бұрын
Very good i have used chainsaws before but always good to see vids like this for a new machine making sure its done right the first time
@coryszeman8572
2 жыл бұрын
I bought the small 14" just to delimb fallen trees and lighter work. I'm impressed with how well it ran out of the box but after 6 tanks of fuel it don't like to fire up when hot now. I tried the steps over but didn't have much luck. Took 15min or so to cool off then it fired up again.
@bfarm44
11 ай бұрын
Need a better spark plug
@TecumsehRulesbcserk
2 жыл бұрын
These are some great saws for the money. Perfect for the average home owner
@daveprice6542
Жыл бұрын
I have a Troy built snow blower. Ten years old and not one problem.
@Fldavestone
Жыл бұрын
Anthony is wondering why he even showed up.
@72dodge340
Жыл бұрын
He held up the air filter! 🤣
@user-sk6ry2ox6g
6 ай бұрын
Eye candy
@xxLabrat407xx
Ай бұрын
Got a TB4216 and like it, but the gasket on the airfilter is the worst, sawdust gets in the filter and intake.
@salalbanese5537
Жыл бұрын
Thanks, very informative, I am looking forward to my saw to be delivered.
@barkingdog4048
9 ай бұрын
It would been advantageous if you showed unboxing, for novice, like myself, who has never owned and|used a chainsaw; otherwise, informative video with advanced content.
@josephkuser3998
3 ай бұрын
I needed this video. Thanks
@user-ik8ii9vb1n
7 ай бұрын
When I press the primer bulb no gas goes in the bulb no matter how many times pushed. But gas leaks out the bottom of the saw body. Can't find anywhere on how to even get to the gas tank and fuel lines. Assume fuel lines need. replacing etc...
@alicedipaolo8942
4 ай бұрын
My chain came loose and came off the bar. I have followed all of the steps in the video but am unable to seat the cover on after I put the chain back. I don't know what I am doing wrong. I have tried several times but it will not seat correctly.
@user-ml4nt8jq7q
8 ай бұрын
What kind of oil does it need for the oil compartment
@SefProStudio
28 күн бұрын
How do I tighten my chain
@williemckinley5023
6 ай бұрын
What cause saw to get hot in short running time?
@GARB34R123
4 ай бұрын
Do you change the primer bulb
@philliphall5198
10 ай бұрын
I’m a small engine shop and all I hear is it’s hell finding new chains and correct one That is what I see as a no buy thing
@robertwatrous8153
Жыл бұрын
Got a tb4215 day after wouldn't start found out the spark plug wire wasn't pushed on the plug hope you check that it was just mine
@philliphall5198
10 ай бұрын
Who is the manufacturer of the Troy brand chain saws ????
@wolfman3283
9 ай бұрын
Nice video . ^_^ . and i am kinda visual . Do you have a video Can show How mix oils and gaz I need a video for visualisation So i can do same at home . thank you :)
@user-ik8ii9vb1n
7 ай бұрын
When I press the primer bulb gas leaks out the bottom of the saw body. I can't find anything about how to fix that. Thanks for your help
@texstarentertainment
Жыл бұрын
Is there a video of replacing the fuel lines on the 20" 49cc?
@kevinpurcell2093
Жыл бұрын
I bought the chainsaw last May. I didn't have to use it. So I emptied out the fuel & oil. Now I hope that this helps me. Any suggestions?
@davidgibson320
Жыл бұрын
What is the difference between the one you have and the Troy built XP
@Butterflies75
Жыл бұрын
The TB4216 do I need to grease the nose sprocket and which hole is the right one
@dalemullen96
Жыл бұрын
It's disappointing that despite the claims in the video, few if any, of the questions in the comment section have been answered. That alone discourages me from unpacking my brand new TB 4318 Troy-Bilt saw. Perhaps it should be returned now before using... Just my impressions.
@JamesHarris-qk7xd
5 ай бұрын
Chainsaw blade won’t move like the brake is on even when you pull back to unlock it.
@user-dr5rs6sf6s
Жыл бұрын
Do I have to put oil and gas in my Troy bilt chainsaw
@frederickpatterson1491
Жыл бұрын
Why is it so hard to buy an aftermarket chain? I have a 16" saw purchased at Menards. They don't have a chain that fits. So I bought an Oregon with the Troybilt part number on it. It doesn't fit. The spec in the manual is 40.6 mm and the chain I received with my saw model on the package. It is 54 instead of 56 DL and only 40 mm. I've searched hi and low. Can't find them. If I knew I could only buy chain from Troybilt I would not have purchased this saw.
@austinweidner1200
2 жыл бұрын
I've followed all the suggestions in the video and still can't get the saw started. Is there a need to change spark plugs or anything else
@meme-gt9oy
2 жыл бұрын
Hi. Can you recommend a ripping chain for the 18" chainsaw?
@dalbertmonroe1734
4 ай бұрын
Why does the chain saw leak oil when just setting down not running? I have model Tb4214
@dalbertmonroe1734
4 ай бұрын
How do you adjust oiler
@dalbertmonroe1734
4 ай бұрын
Thanks guys, I was very mad at myself, I lost my owner manual
@ShroomenStoner
Жыл бұрын
How do I adjust the high and low on the carburetor on the 42cc
@daveprice6542
Жыл бұрын
where can I buy the premixed fuel?
@haroldmack6404
Жыл бұрын
how to change the saw blade and replacing the cover
@jbone11000
2 жыл бұрын
What's the difference between the xp series and the standard series?
@scottlambert4137
Жыл бұрын
Should my chainsaw have notches on the cluch
@farnsworth111
Жыл бұрын
I have a model TB4620C, oil resivour is full the saw is new and had never been used, can't return it as it was on clearance and not returns (Argghh!) no oil was coming out to the chain. I went to adjust the oil screw but it just spins around never tightens either left or right turn. Makes no difference in have oil come out. I assume the screw if stripped and will need the chain oiler replace and that its something I will have to do. How do I get the part number for the chain oiler.
@philliphall5198
10 ай бұрын
Sadly best to take to a shop or someone who works on saws
@davidtseng5565
2 жыл бұрын
Troy-Bilt and Craftsman chainsaws look the same to me. I guess they are made in the same factory in China.
@2990rick
2 жыл бұрын
they also have a huge plant down by Mansfield Ohio
@williambray4134
Жыл бұрын
All are made by MTD, and are exactly the same saw.
@philliphall5198
10 ай бұрын
Same thing 😊
@petercrookham9358
2 жыл бұрын
Are repacement chains easily available? I was told by a previous owner that he could not find a replacement 18" chain at any of the dealers.
@williambray4134
Жыл бұрын
Yes. Look for Oregon S-Series chains for 18" bars. Just make the packaging doesn't say Stihl as the drive link count is slightly different.
@kaseyd-ri4vg
Жыл бұрын
Chain brake won't disengage. The red plate won't come off after removing the 2 set screws with the tool. What now ?
@philliphall5198
10 ай бұрын
Best to return it or go to a shop
@user-dr5rs6sf6s
Жыл бұрын
I have a troybilt chain saw 2 stroke do I have to mix the gas with the oil
@philliphall5198
10 ай бұрын
Yes its a must, buy premix fuel 40/1
@paulcoronado4621
Жыл бұрын
How does it's cost
@vernonbruce3722
2 жыл бұрын
You forgot to mention the throttle lock when starting the saw
@jackiecaughie8622
Жыл бұрын
Does it have motor oil
@sylvainrobert6050
Жыл бұрын
i got a 16 inch in north québec canada brand new 2023
@nancyknudson3749
11 ай бұрын
Why is the choke staying oopen
@user-sk6ry2ox6g
6 ай бұрын
😅 where is the serial number located it's
@jackiecaughie8622
Жыл бұрын
Where does engine oil go
@anthonybrindley4548
Жыл бұрын
I can't figure out how to put the chain back on my 14inch saw
@philliphall5198
10 ай бұрын
Take it to a dealer or local shop Most will not charge you for helping them
@AIRNATION1
2 жыл бұрын
I did not have the tool in box
@Kildaz
Жыл бұрын
My 20" started fine the first time. stopped it and unable to start it again since. :( nothing those people are showing is working . It's brand new damn it!
@robertwatrous8153
Жыл бұрын
Check your spark plug wire is tight down on the plug
@robertwatrous8153
Жыл бұрын
Don't think the person whos job it was to put the wire on the spark plug was gone a few days
@robertwatrous8153
Жыл бұрын
Loose plug wire on mine pushed it up down tight on the plug running perfect start first pull
@tjhudson6194
2 жыл бұрын
How do you tighten chain
@williambray4134
Жыл бұрын
Loosen bar nut so it's finger tight, lift nose of bar, turn tensioning screw clockwise until lightly snug, and tighten the bar nut.
@philliphall5198
10 ай бұрын
Really the dealers should have a free class every two months to show there concerns about safety and customer safety Don’t buy from big retailers They don’t help you after the sale 😢😢😢
@AIRNATION1
2 жыл бұрын
you don't say to fill it up with oil you say it's o ly to put on the chain
@farmfitnesspham4913
Жыл бұрын
Can I use 40:1 for 50:1
@philliphall5198
10 ай бұрын
I do but not all the time because it builds up in the muffler and screen
@kirkbennett4699
Жыл бұрын
i got same 46 20, it's new and won't run at full rpm
@robertwatrous8153
Жыл бұрын
Check spark plug wire got one had too push the wire all the way down on the plug
@robertwatrous8153
Жыл бұрын
Make the spark plug wire is all the way on the plug got one started twice and third time nothing wire wasn't pushed down on the plug
@kirkbennett4699
Жыл бұрын
@@robertwatrous8153 thanks man, i'll try it
@kirkbennett4699
Жыл бұрын
that worked, was plug cap not pushed down, thankyou so much , have a great day dude, back to cuttin here in newfoundland canada, cheers!
@lindaherrington5942
Жыл бұрын
To low RPM how fix this?
@philliphall5198
10 ай бұрын
Look at the instructions Easy to correct, turn screw to right a tad
@philliphall5198
10 ай бұрын
At The price of ready mix fuel you can buy a new chainsaw in a matter of months Just buy real gas and mix your own and add octane booster if needed These look like hav saws
@FATMAC_365
Жыл бұрын
When I pull my choke out soon as I start it goes in by itself
Пікірлер: 91