This is better than the Aspire video tutorials. I wish I could see a woodgrain texture instead but I think some playing around with the texture tool will work. I saw a clipart grain to use but haven't figured how to merge clipart pieces together. I cannot tell you how much this has helped me. Thanks.
@rickhubka
9 жыл бұрын
Thanks Mike. Excellent tutorial. As a beginner I found this excellent because of your detailed explanation of everything you do.
@cncMike304
9 жыл бұрын
Rick Hubka You're welcome Rick.
@antonmessina5304
7 жыл бұрын
Love this tutorial man!!! Extremely helpful with that clever way you trick the vcarve process!!!!! 👌🏻👌🏻👌🏻
@ginmark
9 жыл бұрын
One thing I've found, sort of by accident, is when you're using your .001 end mill to trick Aspire into doing a tight pass with the v-bit, if you select "Raster" in the toolpath settings instead of the default "Offset", it'll calculate the toolpath much quicker, and cleaner to boot.
@cncMike304
9 жыл бұрын
+ginmark Thanks. Good info.
@placitas52
4 жыл бұрын
Nice video, but I have my doubts about any .001 end mill. If this is true you would have a .0005 cut depth per pass. Please correct me as the smallest end mill I can find is 1/64 or a .0156 diameter cutting depth one half of diameter.
@ginmark
8 жыл бұрын
Also, when you create a vector, and you want to mirror a copy, try control +shift+ H for horizontal mirroring, and control + shift + V for vertical mirroring. I use these multiple times a day. And just so you know, I didn't know I could grab a guide line like that! Thanks!
@davidfloyd6963
8 жыл бұрын
I really like the house sign but I think I'm missing something even though I've watched the video several times. When you toolpath the texture, why do you use a start depth od .2"? Was material removed previously that I'm not seeing?
@johnkraemer5505
8 жыл бұрын
Very nice overview and sign! I enjoyed it! Thank you!
@darrenchapman2866
4 жыл бұрын
Thank you for this video. It is very helpful!
@cncMike304
4 жыл бұрын
You're welcome Darren. I hope it helps.
@romadesign4950
7 жыл бұрын
muy buen tutorial. gracias por darnos su tiempo.
@fishfab
5 жыл бұрын
What kind of wood would you recommend for this sign project.?
@lelearmi6186
3 жыл бұрын
Hello . Oblique pyramid with vectric aspire ?
@JakeThompson
8 жыл бұрын
Very good video... Thanks for the help!!
@AndyBlackman
9 жыл бұрын
Thanks for sharing. I noticed your tool calculates a second offset. What is that for? Or did I miss the explanation in the video. Thanks.
@cncMike304
9 жыл бұрын
Andy Blackman Hi Andy. Good question. I wanted to use the Vectric textured pattern generator, but if I'd not created the offset, my textured background would have ran over into the letters and frame of my sign and ruined it. The tool allows me to calculate the distance necessary to make sure my "keep" areas remained safe. I only used that offset for a safe boundary for my texture. If you haven't watched: kzitem.info/news/bejne/sJqBmIqFh4qLg5g, I advise you to. It's long but it shows what I really created the tool for. If you're wondering how that works, watch: kzitem.info/news/bejne/uZCXma1uh4WehmU. It goes more into detail of how and why it works.
@SuperBulegila
6 жыл бұрын
Mike, great video; one question, when you added the .001 End Mill, did you change to an end mill or leave the V-bit in the CNC?
@cncMike304
5 жыл бұрын
Hi Wesley. No, I never really use the 0.001 tool. It really never existed except in the mind of the Aspire software. It forces the v-bit to ignore everything except for the sharp outlines of the letters. Hope this helps.
@marceaton3128
9 жыл бұрын
Great video, thanks for sharing.
@cncMike304
9 жыл бұрын
Marc Eaton Thanks Marc. You're welcome.
@rayreyes5143
3 жыл бұрын
Great video but you lost me a bit on the angle offset calculation....where is that?
@anonymoushuman7206
5 жыл бұрын
I don't understand the part about using a .001 bit for the flat area clearance. Could you elaborate?
@cncMike304
5 жыл бұрын
The 0.001 tool is only used as a dummy tool. It's never really used. If I'd used a normal size tool, even for a dummy tool, it would have allowed the v-bit to clear a lot of areas out, thus destroying my texture between the letters and such. When I tell Aspire that my cutout tool is a very very small tool, it allows that tool to do almost all of the cut, not the v-bit. This tool I will turn off after it's given the v-bit its path. All that's left to do then for the v-bit is to go around the letters and do a sharp cutout on them. I hope this helps.
@monitoringpost
9 жыл бұрын
Where does one obtain the Angle Offset calculator you wrote? Is it available for download? Thanks for the video!
@cncMike304
9 жыл бұрын
monitoringpost dl.orangedox.com/HiBp3i0Ot3ACzEYZve/AngleOffset.exe. If you want to see what I really did the app for, watch this video: kzitem.info/news/bejne/sJqBmIqFh4qLg5g
@monitoringpost
9 жыл бұрын
cncMike304 Will do. Thanks!
@ahmedabdulghafoor2404
6 жыл бұрын
How much time the texturing took?? and how much time it took to complete the job?
@MickWoodworking
9 жыл бұрын
Great video Mike as usual you explain it very clearly and it's easy to follow along. What is the estimated machining time? Keep up the great work, thanks for posting.
@cncMike304
9 жыл бұрын
Mick Martin Thanks Mick. Good question about the time... With all toolpaths selected, it says 26 minutes and 42 seconds with a rapid speed of 200. With your ATC and a rapid speed of about 800, you're probably looking at about 20 minutes. Of course, I have my feed rates set pretty low so you might be able to do it a little faster.
@Bandit.Designs.Videos
6 жыл бұрын
Please explain why every time I do this my name flips upside down. Also unlike the others here I think you should try not skipping click here steps like mirror the image without saying click on the correct side button you need to remember that the buttons are not named just pictures I had to stop and watch you cursor to see what the hell you were doing. But still 5 times later it’s still putting name upside down
@martyalongi732
6 жыл бұрын
I had the same problem. I found that after selecting the name it has to do with which arc you chose first. Top arc first and bottom arc second will keep the name right side up. Bottom arc first and top arc second it will turn the name upside down. Hope this helps. I could have it backward, but that's the problem.
@antonmessina5304
7 жыл бұрын
this is a great video!!!! Thank you!!!
@shelby50411
6 жыл бұрын
For future reference most people do not know the key shortcuts...please show via program interface instead
@nasty906
8 жыл бұрын
very good
@sandlive77
7 жыл бұрын
End mill 0.001 inch? Waw..
@cncMike304
7 жыл бұрын
The 0.001 tool will never be used in reality (never really existed). It's only there to fool Aspire or VCarve Pro into using the v-bit to get the sharp corners without destroying my textured background.
Пікірлер: 39