Damn Salty got the moves. Well done! TFS brother 🇺🇸
@saltyshellback
2 жыл бұрын
Thanks! It's all the Nutty Buddies that gives me the energy 😉
@eltenda
2 жыл бұрын
Looks solid!
@saltyshellback
2 жыл бұрын
So far so good 😁
@lukarfitfit4life390
9 ай бұрын
This was very helpful thank you
@saltyshellback
9 ай бұрын
My pleasure! 😉
@cavtroopermunoz
2 жыл бұрын
The end was worth it Salty San. If I tried to do a spinning anything it would be on a Skinny Medic compound fracture review.
@saltyshellback
2 жыл бұрын
I am a little out of practice so I just plan to run away 😄
@Gunsandfun1961
2 жыл бұрын
Nice....hi karate bag.... I had one for years.... I miss it..... nice stand....it should work great.....
@saltyshellback
2 жыл бұрын
So far so good. It hasn't attacked me yet 😄Yeeeee Haaaawww
@aphazey2863
Жыл бұрын
Would you happen to know the dimensions of the height? I'm interested in buying one, but my basement ceiling is shorter than average.
@saltyshellback
Жыл бұрын
Not sure. The specs says it's 84.13" tall which is about 7 feet.
@demondbrown718
Жыл бұрын
I had to trim the top some
@genieofdalamp
Жыл бұрын
How long did this take you? I just unpacked the box and got discouraged. So many pieces .
@saltyshellback
Жыл бұрын
I think about an hour including the recording time.
@thee_morpheus
Жыл бұрын
The allen wrench included is def worthless
@HNXMedia
2 жыл бұрын
Those things are rock solid! My only suggestion is to "unpack" the bag, line it with an old rug and then "repack" (I made a video on how to do it a couple years back - SHOCK!). Helps to keep the bag "uniform" and minimizes hard spots from the internal sandbags shifting. Those Everlast racks are awesome when space is tight. Looking forward to some more training montages - Yo, Adrien!
@saltyshellback
2 жыл бұрын
That's a good idea with the rug. When I get motivated, I might try that 😄
@TheMultiGunMan
2 жыл бұрын
I need to get one of those.
@saltyshellback
2 жыл бұрын
They are great for working out neked 😄
@TheMultiGunMan
2 жыл бұрын
@@saltyshellback Yes! Nekedness is optimal.
@edwardtaylor6742
6 ай бұрын
Thanks man
@saltyshellback
6 ай бұрын
My pleasure!
@christiannorman5679
2 жыл бұрын
What’s the wrench size u used bro because I can’t find the right size for the nut because it’s so weird
@saltyshellback
2 жыл бұрын
I used a 5/8" socket and wrench.
@gunnwild1
2 жыл бұрын
Next time will you do a "how to" showing me how to assemble my Ikea entertainment center? =)
@saltyshellback
2 жыл бұрын
😄 It might be a while before I get an Ikea entertainment center.
@bctruck
2 жыл бұрын
If that were mine, it would just turn into an extension for my closet. In fact, I had a stationary bicycle that could hold a couple dozen shirts and a blanket or two.
@saltyshellback
2 жыл бұрын
I had a treadmill that could dry a whole weeks worth of clothes 😄
@Harrison-zd3eu
3 ай бұрын
THANK YOU AO MUCH
@saltyshellback
3 ай бұрын
My pleasure! 😉
@southerncalifornia3155
11 ай бұрын
What's the size of the eyehook bolt that holds the punching bag? M10 x what?
@saltyshellback
11 ай бұрын
I'm not sure what size the threads are. Sorry.
@huongtoituonglai24
2 жыл бұрын
Beautiful sharing my friend again 🍷🍷
@saltyshellback
2 жыл бұрын
thanks!
@traviezo766
Жыл бұрын
What size is the socket and the ratchet?
@saltyshellback
Жыл бұрын
5/8" socket. 3/8" drive ratchet
@juan_thesacue2444
7 ай бұрын
Man did that kit come wit your cuz I stuck with here with only bolts and no nuts or washer😭
@saltyshellback
7 ай бұрын
Bummer. My kit had all the necessary hardware. It might have been in a small cardboard box that looked like packing material. Hopefully you still have the box it came in.
@moomoomonkey2727
Жыл бұрын
The left stand is bigger then the right so the bolt won’t go through what should I do
@saltyshellback
Жыл бұрын
Check to see if you used longer bolts on a part that takes shorter bolts.
@2AChef-n-BBQ
2 жыл бұрын
Cool, I could have used one of those a couple years ago
@saltyshellback
2 жыл бұрын
They are relatively inexpensive. I read reviews and people said they broke them...this one seems sturdy enough so I don't know what people were trying to do with them 😄
@2AChef-n-BBQ
2 жыл бұрын
@@saltyshellback yeah I built a hanger in my recording studio for my heavy bag, do I can put it up when the studio is dormant
@Ihmsm8
Жыл бұрын
@@saltyshellbackwhere can you buy one?
@JrMartinez025
2 ай бұрын
What size Allen wrench do you use
@saltyshellback
2 ай бұрын
I'm not sure. It came with the package.
@dwayne4373
Жыл бұрын
What is the name of the nut that the bag hook screws into
@saltyshellback
Жыл бұрын
It's just a lock nut like all the other ones.
@HARMARSCH2
2 жыл бұрын
SaltyShellback, My Nephew got a heavy bag for Christmas but no stand. His Grandpa and I will make one so he an use it in the garage on I get back home.
@saltyshellback
2 жыл бұрын
Cool! I thought about hanging it from a rafter in the garage, but didn't want to have to keep talking it down when I want to park in the gara😄
@michlmelendez
10 ай бұрын
What tool did you use to tighten the bolt?
@michlmelendez
10 ай бұрын
What’s the measurement of the wrench attachment too?
@saltyshellback
10 ай бұрын
It's just a standard 3/8" drive ratchet and either a 9/16" or 5/8" socket.
@shadicalplayz8932
6 ай бұрын
7:39 🔥
@saltyshellback
6 ай бұрын
OK
@josueverificado1464
5 ай бұрын
@saltyshellback dude are you a npc
@boooboooboy
8 ай бұрын
Saw your main picture bro, I'm a former ABE hell yeah boxing again wml 🥊
@saltyshellback
8 ай бұрын
Sweet!
@austinmaldonado9546
Жыл бұрын
I just bought this this past weekend, and I set it up within an hour and everything is super loose. Do you have any recommendations ? I’m scared to hang the bag with everything wobbling around. I followed the directions and the screws, washers, and bolts are where they should be. The bolt only goes so far. I’ve been wanting to use it the past two days but have been out of luck until I figure out how to tighten it all
@saltyshellback
Жыл бұрын
Just curious, did it come with washers? If not, you may need to go buy some washers to make the connections tighter.
@giannimazza7518
Жыл бұрын
Bro I just got this and it’s like none of the screws fit probably I have washers on and the bolts just don’t go in all the way just doesn’t seem right to me. Maybe I need different tools?
@austinmaldonado9546
Жыл бұрын
It came with washers I just need the right tool for the screw to go through the bolt and I’ve had no luck 😅
@austinmaldonado9546
Жыл бұрын
@@giannimazza7518 I feel the same 😅
@saltyshellback
Жыл бұрын
@@giannimazza7518 There are lock washers built into the nuts to keep them from loosening when in use, so you probably just need to go get some better wrenches instead of trying to use the crappy ones that come with the stand.
@buzzsah
2 жыл бұрын
Where did you buy it? Did the bag come with it? Funny you should show this, I was in contact with a friend/instructor that retired from Gov training. We may start up again after 35+ years, and an extra 40lbs. lol Outdoors in my yard, regardless of the weather.
@saltyshellback
2 жыл бұрын
I got the stand from Amazon. My instructor gave it to me when I was in Pittsburgh 😁
@TrueGold88
Жыл бұрын
Hey, I bought bs UFC version of this and it said "Easy install" which ofc i didn't believe. Problem is that the socket head screw is too long for the connecting bottom metal (sideways) piece, Do i really need a tool like urs to push in the nylon lock night so that the head screw will be locked in place (and still stick out?). They look similar to M8x70mm 38mm. Thanks!
@saltyshellback
Жыл бұрын
Sorry, I thought I replied, but apparently screwtube deleted my response. I'm not quite sure what you are asking.
@TrueGold88
Жыл бұрын
@@saltyshellback It's okay, i managed to install that thing, Thanks!
@onesky8647
2 жыл бұрын
They should make IKEA videos just like this, so you wouldn't have to buy everything twice, because you end up making innocent mistakes. lol
@saltyshellback
2 жыл бұрын
😄 I remodeled a kitchen with Ikea cabinets. I think I only made one mistake, but it was all on me. I mis measured a wall panel, but it was easily fixable 😁
@skoko2205
2 жыл бұрын
What tool did you use ?
@saltyshellback
2 жыл бұрын
I think it was either a 9/16 or 5/8 socket.
@user-le8os9sz4n
29 күн бұрын
I just assemble mine and it feels loose, is that normal?
@saltyshellback
28 күн бұрын
It is a mass produced product, so the fitment may be a bit off. Maybe try tightening up the bolts some more.
@thepglenn
2 жыл бұрын
I just built a keyboard stand. looked like that out of the box LOL
@saltyshellback
2 жыл бұрын
Cool!😄
@DashnaLynch
Жыл бұрын
I'm trying to put this crap together and the damn screws are not tight. It's like one is tight and the other one is loose AF. So annoyed
@saltyshellback
Жыл бұрын
hopefully the bolt is not stripped out.
@DashnaLynch
Жыл бұрын
I am not too sure what you mean by that. I was able to complete the whole thing. There were only 2 screws that were tight out of the whole entire stand and every other screw was not tight and stuck to the end. I was so annoyed and just decided to put the whole thing together and it worked out.
@saltyshellback
Жыл бұрын
@@DashnaLynch OK glad it worked out
@JamieSurratt
5 ай бұрын
What is the weight of the bag?
@saltyshellback
5 ай бұрын
I think about 40-50 pounds.
@idleitalian8697
6 ай бұрын
Attempting to build this is enough to break a man.
@saltyshellback
6 ай бұрын
Just gotta take it slow 😉
@idleitalian8697
5 ай бұрын
@@saltyshellback Yes lol
@texaslonestarrider
2 жыл бұрын
Now You can kick a$$ (Bag) anytime you want!
@saltyshellback
2 жыл бұрын
😄Yup!
@redshowbarber41
5 ай бұрын
Do any one know the size of bolts I lost mine
@saltyshellback
5 ай бұрын
I think the bolt heads are 5/8". Not sure what the thread size is though.
@Tardisius
2 жыл бұрын
If you name your bag 'Brandon' you will be able to kick 32% harder =)
@saltyshellback
2 жыл бұрын
Heck yeah!😄
@Wokeword
Жыл бұрын
Where did you get those pads for the ground
@saltyshellback
Жыл бұрын
Amazon. I think they were about $20 for 6 pieces.
@yissuo6986
Жыл бұрын
I tried assembling mine and the nuts wouldn’t even go on :/
Пікірлер: 107