That's a nice tip about putting the glue on before you place them in the jig. I have always done each individual one after i place them in the jig. That will definitely save me some time. Thanks !!!!!
@MarkBuiFord
4 жыл бұрын
Thanks so much, David! I just assembled 70 frames yesterday at about the same speed you did in your very helpful video. This should keep me from getting carpel tunnel whenever I have a lot of frames to assemble and takes assembling frames from being drudgery to almost being fun.
@roycarter6235
4 жыл бұрын
I just finished 100 one at a time. I wish I had seen your video before I took that on. Greetings from the Blue Mountains outside Sydney Australia
@djastram
4 жыл бұрын
Thank for watching mate!
@F6Hawk
10 жыл бұрын
+David Jastram, love it, I learned a new technique from you. My jig is a tad different in that I left one end loose, and use wingnuts and lag bolts to attach it so I can actually clamp the end boards snugly to the top and bottoms as I glue and staple. Also, you might want to staple UNDER the ears on the top boards, parallel to the top board. This will prevent staples from pulling out as you lift the ear and the frame is propolized to the hive body. Might not happen, but a horizontal staple thru the end board into the top board is a lot stronger than what you show here (which I used to do). Thanks for sharing!
@lillicastaldo2477
7 жыл бұрын
Brilliant! My frames are arriving today... I am making your jig!! Thank you for your advise!
@djastram
7 жыл бұрын
Thanks for watching.
@djastram
11 жыл бұрын
Thanks for the feedback. I'll try the paint brush idea for sure.
@jorgemoreno5032
4 жыл бұрын
Thank you for sharing this video, it will certainly will help me a lot, just starting to build my first frames.Greetings from San Diego, California. Best Regards.
@djastram
4 жыл бұрын
Glad to help.
@MaduPresident
4 жыл бұрын
hello friend, I am very impressed with the technique you cultivate bees, all modern, from the cultivation box making tool to the equipment you use. greetings from me a traditional beekeeper from the province of Bengkulu, Indonesia. I'm very impressed with your technique for making bee boxes
@djastram
4 жыл бұрын
Thanks for watching.
@marinvidovic763
2 жыл бұрын
Nice work !!! Thanks for sharing !!!
@waldmana
9 жыл бұрын
Thank you from the bottom of my baby beekeeping heart.
@djastram
9 жыл бұрын
waldmana I am happy to help. Tell your friends they need bees too! :)
@DamSutt1986
11 жыл бұрын
Nice, great way to keep them squared up.
@robertzack2503
3 жыл бұрын
i check to make sure frames are square after assembling. it's also a good idea to nail/staple the side bars to the top rails.
@denniss2290
Жыл бұрын
Great content great video I to use inch and a quarter and apply two of them
@bear09871
8 жыл бұрын
Jig looks like it works good. I prefer a one and a quarter inch staple in the bottom. That way you get 3/4" into the frame. A 5/8" would only be going in an eighth of an inch. Would not hold much. You do use glue though. That would hold more.
@foldissimo
11 жыл бұрын
I think it works also without glue. Great Idea!!
@Th3_Gael
4 жыл бұрын
Yeah, until the bees propolise them down and you pry them up. Its the glue that holds them not the nails You'll only miss the glue 1 time after the mess that creates
@franckborekaou797
5 жыл бұрын
merci pour la technique de montage de cadre. bonne continuation dans l'apiculture et merci du partage de connaissance Monsieur.
@djastram
5 жыл бұрын
Je vous en prie. Je suis heureux de partager. Ma femme et moi avons passé 2 semaines en France l'été dernier. Nous étions à Paris, Avignon et Marseille. Nous avons passé un bon moment. Merci d'avoir regardé.
@franckborekaou797
5 жыл бұрын
@@djastram enchanté pour vous d'avoir visiter la France, je vous écris de la nouvelle -Calédonie dans l'Océanie bonjour chez vous.
@djastram
5 жыл бұрын
Oui, c'était un voyage merveilleux. Nous accueillons des étudiants en échange à l'étranger et "notre fille" de l'année dernière nous a emmenés à la maison. Nous sommes restés avec sa famille près d'Avignon. C'était tellement génial. Une telle bonne nourriture.
@annefrey8732
10 жыл бұрын
I love defiant frame builders.
@honeybeesinjapan
11 жыл бұрын
very nice. I love that jig!
@whollylostandgone
11 жыл бұрын
Looks great, awesome ideas!
@VictorFursov
7 жыл бұрын
Thank you for Video! Best greetings to American beekeepers from Ukraine! Good luck and best wishes!
@djastram
7 жыл бұрын
Thank you for watching. Ironically, we have a foreign exchange student living with us, she is from Ukraine. It's a small world. :)
@swampratman2000
11 жыл бұрын
looks good
@coalfieldbeelovergerald3687
8 жыл бұрын
That jig is pretty darn swift. Love it. Having a very small woodshop n limited wood working know until a year ago I quickly found out the advantages of many different man-hour saving jigs. Guess I'll scan the comments to see if you left a plan lead for the cool jig. Thankz !
@djastram
8 жыл бұрын
Thanks for watching!
@coalfieldbeelovergerald3687
8 жыл бұрын
+David Jastram no problem Bro ! Getting back into beekeeping I Need all the help I can get. Returning to it at 70 .. I don't have time to get caught up as much. Happy beekeeping.
@savagesultin
11 жыл бұрын
wow that seems like a lot of work. I buy my glue in a large container and pour some out onto a plastic dish. then I take a small paint brush and brush my glue on. I use a staple on top then in the side. then one in the bottom. The side staple keeps the top secure a bit more.
@georgekatsinis5224
5 жыл бұрын
Glue Brushes - CHEAP at Harbor Freight
@chris3m98
10 жыл бұрын
Nicely done. Thank you
@JaiUneGuruDeja
11 жыл бұрын
Love the compressor hammer. You dah man!
@denniss2290
Жыл бұрын
Homes when you get the all the top bars on you have the stapler pointed in the same direction staple the right side and just move across the side and stable the left side you don't even have to change the direction of the stapler don't quite understand the comment when you're stifling the ones on the right side of your jig your Staples pointed in the same direction and then we just move it over to the left side you still point in the same direction
@djastram
Жыл бұрын
Thanks for watching.
@williamkilcullen9726
9 жыл бұрын
nice job..looking at you makes it soo easy..hope to have your dimensions for that work.
@djastram
9 жыл бұрын
William Kilcullen Take a look at the link for building details. Thanks for watching.
@williamkilcullen9726
9 жыл бұрын
thank you soo much for that wonderful video...planning my self to have my own honey bee farming..
@rocaeetc...6302
5 жыл бұрын
Que ótima idéia. Sou seu fã.
@djastram
5 жыл бұрын
Obrigado!
@MrElivwbug
9 жыл бұрын
100% good tip thanks a lot
@djastram
9 жыл бұрын
Eliezar Gomez Thank you.
@MrElivwbug
9 жыл бұрын
could you tell me the measurements of your pattern?
@Hollaback1973
9 жыл бұрын
u got it mate :) i like your sistem, and i give u two thumbs up brother
@johntonelli4510
4 жыл бұрын
If you dont glue them you can remove one side and replace it when it cracks this also keeps any dangerous chemicals like formaldehyde in the glue contamination your bees
@djastram
4 жыл бұрын
I suspect exposure to glue is insignificant compared to what bees are exposed to in a corn field.
@johntonelli4510
4 жыл бұрын
Yes but you have control over one of these two exposures
@djastram
4 жыл бұрын
I don't keep bees any longer, but I have no reason to worry about glue.
@libertytamang494
6 жыл бұрын
Good job with easy method bro
@djastram
6 жыл бұрын
Liberty Tamang thanks for watching.
@michaelmueller8976
6 жыл бұрын
I thank you very much!
@djastram
6 жыл бұрын
You're welcome.
@Warren76317
5 жыл бұрын
Fastener should be Twice the length of the part you are holding, just so you know.
@AZAMATBASHKIRIA
6 жыл бұрын
Круто. Спасибо за видео.
@djastram
6 жыл бұрын
Добро пожаловать!
@mohendradibakar5373
4 жыл бұрын
I need adjackly next step video to follow it. May I get it in my inbox plz?
@libertytamang494
6 жыл бұрын
Bro in this box which bee will you keep?
@meshackabucheri6770
3 жыл бұрын
Waoo l like that
@rocaeetc...6302
5 жыл бұрын
Like. Qual a medida dessa caixa ?
@djastram
3 жыл бұрын
Ele contém 10 quadros, mas os tamanhos dos quadros variam, então talvez você precise fazer algumas contas. Obrigado por assistir!
@denniss2290
Жыл бұрын
Has Bob Bennie says if the glue's not oozing out you did not use enough sometimes I go to get my frames in the glue to each other and I say damn
@nitropresus
10 жыл бұрын
Rápido y prácticao. pero cuando esos marcos tengan propóleos y cera ; es muy probable que se desensamblen al levantarlos, yo.evito eso.clavandolos por el costado. Saludos y buena suerte.
@djastram
4 жыл бұрын
¡Gracias por ver!
@denniss2290
Жыл бұрын
The bottom of the frame is a whole different issue because there's no lip to push your safety up when you're stapling the left side for spinning the Box might be necessary recommend putting up in your safety so it doesn't have to be pushed up I would never recommend such a
@djastram
Жыл бұрын
Thanks for watching.
@tacocubed
9 жыл бұрын
Dave- what type of frames are those? (Open wedge/split top/etc) thanks and great vid!
@djastram
9 жыл бұрын
tacocubed They are grooved top bar, grooved bottom bar. www.mannlakeltd.com/mm5/merchant.mvc?Store_Code=mannlake&Screen=DISP_INFO&Product_Code=FR-800&ajax=true
@Pocketfarmer1
8 жыл бұрын
Good Job!
@djastram
8 жыл бұрын
Thank you.
@mr.morocco8032
6 жыл бұрын
Thanks you very much
@djastram
6 жыл бұрын
Mr. Morocco thanks for watching.
@joeamaral5215
7 жыл бұрын
the best way to do a perfect job :) 100 likes
@djastram
7 жыл бұрын
Thank you. Thanks for watching.
@eddielloyd13
9 жыл бұрын
Hi. Your video was very good, more too the point how you put the frame together so quick. I'm starting off my own bee hobby this year and was looking for a cheaper way to build a national Irish hive. If you have any more video's please could you send me the link. Thank allot.
@djastram
9 жыл бұрын
If you click on my name above, you'll see my other videos. Please subscribe. Thank you.
@eddielloyd13
9 жыл бұрын
Cheers Dave, thanks
@markd.lavallee9402
4 ай бұрын
Great,,,, where do you get your frame material from?
@djastram
11 жыл бұрын
Thanks. I'm not sure how many frames per bottle.
@bcasey101
8 жыл бұрын
+David Jastram Thanks for the video, just what I have been looking for. Quick question, on the plans that you link to, he states to use 1x4, which is only 3-1/2" tall. That seems too short to me and yours look more like 1x6 (5-1/2" tall). Am I correct? Thanks in advance
@djastram
7 жыл бұрын
+B Casey I believe my frame jig is 1x4's also. Thanks for watching.
@abanikumarray6837
6 жыл бұрын
Thank you sir
@djastram
6 жыл бұрын
Abani Kumar Ray You're welcome.
@robertmuir4496
10 жыл бұрын
Nice-I got one from Mann Bees.Sorry Anthony we use a air gun to.
@F6Hawk
10 жыл бұрын
Not sure why I can't reply to anthony jarboe's comment, but... since you don't have $10,000 to buy an air stapler, why not do like I did and but the $15.99 one from Harbor Freight?
@billiamc1969
7 жыл бұрын
I don't glue frames...makes it impossible to fix if there is a problem...
@billiamc1969
7 жыл бұрын
Besides, the bees will glue everything with wax and propolis...
@djastram
11 жыл бұрын
yes.
@curtislovering3522
7 жыл бұрын
Nice work, do you have any other bee hive jigs kicking about in your workshop that we can see please, very helpful. Cheers Curt
@djastram
7 жыл бұрын
That's the only jig I use. I went away from building my own boxes. It's cheaper for me to buy. Thanks for watching.
@CNCJoeFromRomeo
8 жыл бұрын
Nice Beehive assembly Fixture! Is there an easy way to insert the foundations into the already assembled frame? I am using the plastic pre-waxed foundations... and having a bugger of a time getting them into the frames after the frame is fully assembled.
@djastram
8 жыл бұрын
+Joe FromRomeo I know what you mean. I just insert the foundation into the top bar, and flex the middle of the foundation until it slips behind the bottom bar and into the bottom bar notch. Thanks foo watching.
@CNCJoeFromRomeo
8 жыл бұрын
Thank you for your answer - that is the same way that I am doing it. First into the top bar, then felxing and inserting into the bottom bar. It is a bit hard on the fingers after a while.
@tacocubed
11 жыл бұрын
What type of wood do you use to construct the frames?
@fergieferguson2457
5 жыл бұрын
We’re do you get your frames?and what style are they?and will the same jig work for med. frames..
@djastram
5 жыл бұрын
I got my frames from Mann Lake. The ones in the video are deeps, but the same jig works for mediums as well. Thanks for watching.
@airwolf61970
6 жыл бұрын
I am left to assume the staples are crown and 1/4 ?
@djastram
6 жыл бұрын
Yes. Thanks for watching.
@The.Chiefman
9 жыл бұрын
Do you use a side nail to hold the top bar and sides ?
@djastram
9 жыл бұрын
Yes.
@saeed4ish
4 жыл бұрын
Do you selling the frames?
@djastram
4 жыл бұрын
No. I buy them. Thanks for watching.
@cqammaz53
5 жыл бұрын
What size staples are you using???
@djastram
5 жыл бұрын
I think they are 18ga, 1" long, 1/4" crown.
@ericgreer1969
10 жыл бұрын
What are the dimensions of your jig?
@benjamisprime338
5 жыл бұрын
Doesn't the glue contain formaldehyde?
@djastram
5 жыл бұрын
I'm not sure what is in glue. Thanks for watching.
@georgekatsinis5224
5 жыл бұрын
No - TiteBond is great stuff.
@djastram
10 жыл бұрын
+anthony jarboe I'm sorry my stapler troubles you.
@emironhunters3607
6 жыл бұрын
What kind of wood you use?
@djastram
6 жыл бұрын
emiron valencia Pine. Thanks for watching.
@robertpryor9679
7 жыл бұрын
what size staples do you use
@djastram
5 жыл бұрын
1" long 1/4" crown 18 gauge. Thanks for watching.
@EvgeniiKhakhalin77
4 жыл бұрын
Молодец, мне понравилось. Палец вверх.
@djastram
4 жыл бұрын
Спасибо огромное!
@sandrosabashvili1937
8 жыл бұрын
what's name this machine? I want to buy this
@djastram
8 жыл бұрын
Make one.
@georgekatsinis5224
5 жыл бұрын
Staple Gun
@jerryprewett5294
9 жыл бұрын
cool looking jig starting to gather up equip. for me to start keeping this spring i hope .subd ya like to learn what i can before hand might not make as many mistakes ya know
@djastram
9 жыл бұрын
Welcome to beekeeping!
@abanikumarray6837
6 жыл бұрын
What is gum?
@djastram
5 жыл бұрын
I'm not sure what you are asking.
@robertpryor9679
7 жыл бұрын
your video answered my question.....thanks
@djastram
7 жыл бұрын
Thanks for watching.
@user-nb4cv1nc8g
5 жыл бұрын
vgood
@fineshooter
11 жыл бұрын
nice I can't afford nice things=lol Don
@gilbertocabral2733
3 жыл бұрын
Gostei👍👍👍🛠🛠🛠
@djastram
3 жыл бұрын
obrigado
@reginaldomartins4155
8 жыл бұрын
bem pratico ! ok
@djastram
8 жыл бұрын
+Reginaldo Martins Obrigado por assistir!
@abanikumarray6837
6 жыл бұрын
What is machine name?
@djastram
5 жыл бұрын
I'm not sure what "machine" you are asking about.
@scottmaschino1927
5 жыл бұрын
It's a Brad Nailer. Can pick one up for around $40. Runs on compressed air.
@georgekatsinis5224
5 жыл бұрын
1/4" Crown Staple Gun
@celsod21
8 жыл бұрын
muito inteligente eu gostaria de saber como faz quadrinhos.
@djastram
5 жыл бұрын
Obrigado por assistir!
@jorgemoreno5032
4 жыл бұрын
Luis, this is a good start: kzitem.info/news/bejne/l6an2a57hqeJnJw And Also: kzitem.info/news/bejne/l5ClqGqZZp2mqJg kzitem.info/news/bejne/026Q3miri4OpbKA But check "Bee to Z" channel for more detailed instructions: kzitem.info/news/bejne/pJml1mSKfpiiqmk Buena Suerte!
@geekandchickens9590
9 жыл бұрын
I enjoyed your video. I was wondering do these get painted or water sealed? I'm starting into bee keeping hobby next year and this is the preparation planning year. Unlike the chickens I have my wife is 100% behind the bees. :) Do you know of any concerns on what goes on the boxes? I'm planning my boxes to go in my corner lot near my chicken coop. kzitem.info/news/bejne/x66QzKxjk3aoYIo and I want them to last forever, hot sun and wind so wood protection I think is needed.
@djastram
9 жыл бұрын
Geek and chickens The frames need no treatment. The wood will last longer than you want to keep them anyway. On boxes, I use Kilz primer, and 1 coat of "Oops" paint from the hardware store, or you can check with Habitat ReStore in your area. They sometimes have cheap exterior paint. Thanks for watching.
@mrsgbee8246
9 жыл бұрын
I was so impressed by your video I put a link to it on www.beekeepingforum.co.uk so that other British people can see how good they are.
@djastram
9 жыл бұрын
Thank you for the kind words.
@inhnam9542
10 жыл бұрын
Đóng khung cầu ong
@coalfieldbeelovergerald3687
8 жыл бұрын
+định nam vâng, đây là những khung bee hive.
@coalfieldbeelovergerald3687
8 жыл бұрын
+CoalfieldBeeLover Gerald: Ong chua viet tieng Viet gioi lam.
@1-a-1
5 жыл бұрын
Хернёй занимается ... Я верхние и нижние планки из 8 мм фанеры делаю, Просто и быстро. (улей альпийский корпус на 225 мм)
@djastram
5 жыл бұрын
Спасибо за просмотр!
@anthonyjarboe7386
10 жыл бұрын
cool hive but in the videos I hate it like when you used your Staple gun. ex. "for the next step we will be using a $10,000 piece of equipment that most people don't have." that what I didn't like about this video
@PopsShack
8 жыл бұрын
+Anthony Jarboe $40 for a staple gun.
@nitropresus
10 жыл бұрын
Rápido y prácticao. pero cuando esos marcos tengan propóleos y cera ; es muy probable que se desensamblen al levantarlos, yo.evito eso.clavandolos por el costado. Saludos y buena suerte.
Пікірлер: 165